ALL Products Minus B-Stock
-
XS Power RSV-S6-30Q
14 Volt LTO Battery Equivalent AGM Amp Hours: 60 Cranking Amps: 500 Max Amps: 1,000 Wattage: 5,000 Amp Hours: 20 M6 Terminal Hardware Included 9.25 lbs. This Lithium Titanate Oxide (LTO) RSV Series battery uses a high-power lithium cell, designed for high-burst output (12,000 watts for five seconds) and enhanced reserve capacity. The built-in 2/0 AWG bussing allows up to four positive and four negative hidden direct connections to each module without the need for any externally exposed bussing, while still leaving two easily accessible top terminals and four series or parallel expansion terminals to easily build a bank of batteries of nearly any size imaginable.XS Power Titan8 lithium batteries are also offered in BCI direct fit models that are fully insulated with temperature monitoring built in and are suitable for use in the factory under-hood position.See specifications below.Lithium Titanate Battery- Designed for Peak Capacity
$869.99
-
SMD 250A Ceramic Fuse
SMD Heavy-Duty Ceramic ANL Fuses The SMD (Steve Meade Designs) Ceramic ANL fuse is a high-performance alternative to standard electrical protection. Designed for high-current environments, these fuses prioritize thermal stability and circuit safety. Product Advantages: High-Grade Ceramic Construction: Features a ceramic body that offers superior heat resistance compared to traditional plastic fuses. Warp-Resistant: The ceramic casing is designed to maintain its structural integrity under extreme temperatures, preventing the warping or melting common in standard plastic ANL fuses. High-Current Compatibility: Engineered to handle the rigorous demands of high-output electrical systems. Available Amperage Ratings: Available in pairs for the following ratings: 100A 150A 200A 250A 300A 500A 600A
$27.49
-
SMD UB2ALM Ub-2 (2 Post Bar) Distro Black
SMD UB-2 (2 Post Bar) Power/Ground Distribution Block (Black) Clean up your vehicle's wiring and reduce the risk of engine noise with the SMD UB2ALM distribution block. Designed to centralize your wiring for multiple amplifiers or 12v devices, this versatile 2-post block can be configured for either positive distribution or as a centralized grounding point. Key Features: Versatile Application: Can be utilized as either a power distribution block or a grounding block. Heavy-Duty Construction: Built with a durable 3/4" HDPE base and a protective 3/16" clear acrylic cover. Premium Hardware: Utilizes all stainless steel (or optional copper) hardware for reliable conductivity and corrosion resistance. Universal Compatibility: Accepts any ring terminal with a 5/16" hole. Technical Specifications: Model: UB2ALM (Black) Posts: 2 Terminal Size: Fits 5/16" Ring Terminals Dimensions: 2.65" x 3" x 2" (LxWxH) Origin: Made in California, USA Note: Available in several different colors (select your option below).
$36.29
-
SMD DOUBLEHSFBALM Double Anl Fuse Block Black
SMD Double ANL Fuse Block - High-Temp (Black) Protect your vehicle's electrical system from short circuits and catastrophic damage with the SMD Double ANL Fuse Block. Designed for demanding aftermarket sound systems and heavy-draw accessories like winches and lighting, this industrial-strength 2-spot fuse holder ensures safe and reliable power distribution. Key Features: High-Temperature Design: Engineered to withstand harsh environments. Suitable for under-hood engine compartment mounting, as well as cabin, trunk, or marine applications due to its corrosion-resistant materials. Heavy-Duty Construction: The base is precision-milled from durable HDPE. Premium Hardware: Built utilizing a combination of Aluminum, Stainless Steel, and Copper components for optimal conductivity and longevity. Safety Cover: Includes a 3/16" clear acrylic cover to protect against accidental contact with live terminals. Optimal Placement: Designed to be mounted within 18" of your power source (front battery, alternator, or auxiliary battery bank) for maximum protection. Technical Specifications: Model: DOUBLEHSFBALM (Black) Capacity: 2-Spot (Double) ANL Fuse Holder Base Material: Milled HDPE Cover Material: 3/16" Clear Acrylic Dimensions: 5" x 2.812" x 2" (LxWxH) Origin: Made in the USA
$57.19
-
SMD SINGLEFBALMMOLD Single Anl Fb Fuse Block Black
SMD FB-1 Single ANL Fuse Block (Black) The SMD FB-1 is a professional-grade single ANL fuse holder designed to protect your vehicle’s electrical system from short circuits and fire. This unit is specifically engineered for high-demand applications such as aftermarket audio, winches, lighting, and auxiliary accessories. Key Features: Durable Construction: Features a high-temperature injection-molded body designed to withstand the harsh conditions of an engine bay. Premium Materials: Utilizes an aluminum busbar and landings with stainless steel hardware for long-lasting conductivity and corrosion resistance. Safety Cover: Includes a 3/16" CNC and laser-cut clear acrylic cover to prevent accidental contact with live terminals. Engine Bay & Marine Ready: Built to withstand the elements; suitable for under-hood installations and marine applications. Optimal Placement: For maximum safety, it is recommended to mount this unit within 18" of the power source (battery, alternator, or auxiliary bank). Technical Specifications: Model: SINGLEFBALMMOLD (FB-1) Fuse Type: Single ANL Body Material: High-Temp Injection Molded Hardware: Aluminum and Stainless Steel Cover: 3/16" Clear Acrylic Dimensions: TBD
$32.99
-
SMD 1CHCOP 1 Channel Terminal Cup Copper Black
SMD 1-Channel Heavy Duty Terminal Cup (Copper Black) The SMD 1CHCOP is a high-strength alternative to standard injection-molded plastic terminals. Precision-milled from 3/4" HDPE, this single-channel unit is engineered to remain airtight and structurally sound under extreme subwoofer enclosure pressure. Key Features: Durable Material: Milled from 3/4" HDPE, offering a high strength-to-weight ratio that will not break or leak under grueling box pressure. Premium Hardware: This specific model is equipped with high-quality copper hardware to ensure maximum conductivity and long-term durability. Heavy-Duty Terminals: Features 5/16" bolt terminals designed for a secure electrical connection with standard ring terminals. Reusable Design: Built to withstand multiple installations, allowing the unit to be safely transferred between enclosures when upgrading. Technical Specifications: Model: 1CHCOP Color/Hardware: Black HDPE / Copper Hardware Material: 3/4" Milled HDPE Terminal Size: 5/16" Bolt Cutout Diameter: 2.75" Flange Diameter: 3.75" Dimensions: 3.75" x 3.75" x 1.5" (LxWxH) Origin: Made in the USA
$46.19
-
SMD 2CHG8 2 Channel Terminal Cup Grade 8 Black
SMD 2-Channel Heavy Duty Terminal Cup (Grade 8 Black) The SMD 2CHG8 is a high-strength 2-channel terminal cup designed for high-pressure subwoofer enclosures. Precision-milled from 3/4" HDPE, this unit provides a rigid, airtight alternative to standard plastic terminal cups that often crack or leak under heavy excursion. Key Features: High-Pressure Performance: Milled from solid 3/4" HDPE with a 1/2" body and 1/4" flange to ensure structural integrity in the most demanding enclosures. Grade 8 Hardware: Equipped with high-strength Grade 8 hardware for maximum durability and secure electrical contact. 2-Channel Configuration: Allows for independent wiring of multiple voice coils or drivers through a single terminal location. Industrial Terminals: Features 5/16" bolt terminals compatible with heavy-duty ring terminals. Reusable Design: Built to last a lifetime, this terminal cup can be moved and reinstalled in new enclosures as you upgrade your system. Technical Specifications: Model: 2CHG8 Material: 3/4" Milled HDPE Hardware Type: Grade 8 Steel Terminal Size: 5/16" Bolt Dimensions: 4.625" x 5.857" x 1.5" (LxWxH) Origin: Made in the USA
$31.89
-
Sparked Innovations Sparked Innovations TTB-HS4 Tweet Tweet Blaster 3" Tweeter 4ohm 100W
A mini horn super tweeter; have you ever seen such a thing? Now you have. We call it the Tweet Tweet Blaster, a fun name for a tweeter that does a serious job at delivering loud and clear music. Here at Sparked Innovations, we take our high frequencies very seriously. The Tweet Tweet Blaster was designed for clarity and wide dispersion in a small package. The neodymium motor helps deliver high-power sound with tight control over the lightweight diaphragm. The flared horn might be the smallest in the industry, but it accurately delivers a wide range of high frequencies, even when mounted off-axis from the listener, such as door panel mounting in most vehicles. 3" Tweeter Feature Specification Frequency Response 4,000hz - 20,000hz Sensitivity 101dB RMS Power Handling 100W Motor Material Neodymium Horn Material Cast Aluminum
$32.99
-
Sundown Audio M-Series Drop-In Kit
These are standard drop-in recone kits ONLY. If you need a custom recone kit, you will still need to call us to place your order.There are no refunds or exchanges with drop-in re-cone kits. Please make sure you are ordering the correct model, version and impedance prior to ordering.
$199.99 - $289.99
-
Ciare PW257 Professional 10" Low Frequency Driver
Ciare PW257 Professional 10" Low Frequency Driver: Precision Meets Power The PW257 is a professional-grade 10-inch low-frequency driver engineered for high-impact sonic performance without compromising clarity. Designed for high-output mid-bass arrays or compact low-frequency systems, it is rated at 400 W AES continuous power handling with 800 W program capability. With a sensitivity of 96 dB, the PW257 efficiently converts power into clean, undistorted output, making it well suited for touring rigs, club installs, and demanding pro-audio environments. At its core is a massive 3-inch (75 mm) voice coil wound on an aluminum former for efficient heat dissipation. Combined with a Nomex fabric surround and a rigid aluminum basket, this construction ensures excellent thermal control, mechanical stability, and tight, punchy low-end performance defined by an Fs of 57 Hz and an Xmax of 5.5 mm. Optimized for vented enclosures, the PW257 delivers a wide frequency range from 50 Hz to 3000 Hz, making it an excellent choice for high-performance 2-way systems or dedicated mid-bass applications with a distinctly professional sound signature. Data Sheet PW257 PROFESSIONAL 10" DRIVER SPECIFICATIONS Nominal Diameter 250 mm (10 in) Nominal Power Handling (AES) 400 W Program Power 800 W Sensitivity (2.83V/1m) 96 dB Frequency Range 50 Hz – 3000 Hz Nominal Impedance 8 ohms Voice Coil Diameter 75 mm (3 in) Winding Material / Former Aluminum Basket Material Aluminum Net Weight 5 kg (11.01 lb) THIELE-SMALL PARAMETERS ELECTRO-ACOUSTIC PARAMETERS Fs (Resonant Frequency) 57 Hz Qes / Qms / Qts 0.33 / 3.2 / 0.3 Vas (Equivalent Volume) 31 dm³ (1.09 ft³) Xmax (Linear Excursion) 5.5 mm (0.22 in) Bl (Force Factor) 15.86 Tm Sd (Effective Cone Area) 353 cm² (54.72 in²) EBP (Efficiency Bandwidth Product) 173 MOUNTING & ENCLOSURE MOUNTING & ENCLOSURE INFO Overall Diameter 268 mm (10.55 in) Baffle Cutout Diameter 235 mm (9.25 in) Depth 120 mm (4.72 in) Recommended Enclosure Vented Box / 14 dm³ (0.494 ft³) Surround Material Nomex Fabric
$252.61
-
AUDIO ACE JESTER 15" DUAL 2 OHM SUBWOOFER
Product Overview: Audio Ace’s Powerful and Versatile 15-Inch Driver The Audio Ace Jester 15" D2 is designed to achieve a high level of both Sound Quality (SQ) and Sound Pressure Level (SPL), rated at a formidable 3, 000W RMS. Its design includes a fairly low Free Air Resonance (Fs) and a powerful 300 oz motor structure, making it highly versatile for great sound across a wide range of music. Whether you're aiming for extreme sound levels or just wanting to enjoy powerful bass in your daily driver, the Jester is an excellent choice. It features a heavy-duty die-cast aluminum basket, a 3-inch BACCAW 4-layer voice coil, and a 4-layer 10-inch spider suspension. The Dual 2 Ohm impedance provides a flexible path to a 1 Ohm or 4 Ohm final load. AUDIO ACE JESTER 15" DUAL 2 OHM SPECIFICATIONS Model Jester 15" RMS Power Handling 3,000 Watts Voice Coil 3" BACCAW 4 Layer Coil Magnet Structure 300 oz Suspension 4 Layer 10" Spider Basket Heavy Duty Die Cast Aluminum Nominal Impedance Dual 2 Ohm (D2) Cutout Diameter 14.331 in Mounting Depth 10.07 in LOSS FACTORS & MISC PARAMETERS Total Q (Qts) 0.464 Mechanical Q (Qms) 5.368 Electrical Q (Qes) 0.508 Free Air Resonance (Fs) 33.7 Hz Sensitivity (Lm) 86.10 dB Equivalent Volume (Vas) 33.8589 L Moving Mass (Mms) 551.552 g BL Factor (Bl) 28.449 DC Resistance (Re) 3.52 Ohms Effective Piston Area (Sd) 769.45
$599.99
-
AUDIO ACE JESTER 18" DUAL 2 OHM SUBWOOFER
Product Overview: Audio Ace’s Powerful and Versatile 18-Inch Driver The Audio Ace Jester 18" D2 is designed to achieve a high level of both Sound Quality (SQ) and Sound Pressure Level (SPL), rated at a strong 3,000W RMS. Its design includes a fairly low Free Air Resonance (Fs) and a powerful motor structure, making it highly versatile for great sound across a wide range of music. Whether you're aiming for extreme sound levels in your daily driver or looking to be one of the loudest vehicles in your town, the Jester is a great choice. It features a heavy-duty die-cast aluminum basket, a 3-inch BACCAW 4-layer voice coil, a 300 oz magnet structure, and a 4-layer 10-inch spider suspension. AUDIO ACE JESTER 18" DUAL 2 OHM SPECIFICATIONS Model Jester 18" RMS Power Handling 3,000 Watts Voice Coil 3" BACCAW 4 Layer Coil Magnet Structure 300 oz Suspension 4 Layer 10" Spider Basket Heavy Duty Die Cast Aluminum Nominal Impedance Dual 2 Ohm (D2) Cutout Diameter 16.85 in Mounting Depth 11.10 in LOSS FACTORS & MISC PARAMETERS Total Q (Qts) 0.550 Mechanical Q (Qms) 6.006 Electrical Q (Qes) 0.605 Free Air Resonance (Fs) 29.2 Hz Sensitivity (Lm) 87.30 dB Equivalent Volume (Vas) 81.8396 L Moving Mass (Mms) 703.831 g BL Factor (Bl) 27.457 DC Resistance (Re) 3.53 Ohms
$619.99
-
Audio Ace Diamond 8″ Mid‑Range Pro Audio Car Speaker - 180 W RMS, 4Ω
Product Overview: High-Sensitivity Pro Audio Performance The Audio Ace Diamond 8" mid-range driver is designed to deliver the high-volume characteristics of a professional audio speaker within a car audio environment. This 8-inch driver is conservatively rated at 180W RMS and is built to play louder than most mid-range speakers in its class, boasting a high 94 dB sensitivity. It features a 1.52-inch voice coil, a 26 Oz magnet motor, and a custom-tooled basket with the Audio Ace logo, ensuring durability and style. With a frequency range of 80 Hz to 13 kHz and a nominal 4 Ohm impedance, the Diamond 8" provides a powerful and clear mid-frequency anchor for your system. AUDIO ACE DIAMOND 8" MID RANGE SPECIFICATIONS Size 8 Inches RMS Power Handling 180 Watts Nominal Impedance 4 Ohm Voice Coil 1.52 Inch Magnet Weight 26 Oz Sensitivity 94 dB Frequency Range 80 - 13k Hz Mounting Depth 3 1/4 Inches Overall Diameter 8 1/4 Inches Maximum Excursion (Xmax) 1.75 THIELE-SMALL PARAMETERS Sensitivity (SPL) 96 dB Electrical Q (Qes) 0.809 Mechanical Q (Qms) 4.589 Total Q (Qts) 0.688 Resonance Frequency (Fs) 113 Hz Effective Piston Area (SD) 240.5 DC Resistance (Re) 4 Ohms BL Factor (BL) 7.176
$104.99
-
RESILIENT SOUNDS PLATINUM V2 15" DUAL 2 OHM (D2) SUBWOOFER
Monumental Power and Excursion in a 15-Inch Chassis The Resilient Sounds PLATINUM V2 15" D2 is engineered to deliver competition-level output and fidelity, serving as a true powerhouse for any advanced audio system. Conservatively rated at a massive 2,500W RMS (5,000 Watts Peak), this 15-inch subwoofer boasts a 13% larger motor assembly and a 20% longer 3-inch 8-layer voice coil, which dramatically increases thermal handling and motor force (BL²/Re is up to 50% higher than the V1). The Dual 2 Ohm configuration provides flexible wiring options for 1 Ohm or 4 Ohm final loads. Featuring a huge 35mm XMAX, a 10-inch spider pack, and a stiff carbon fiber cone, the Platinum V2 15" is ready to produce deep, high-impact bass that will satisfy the most demanding audiophiles. TECHNICAL SPECIFICATIONS Specification Detail Model Platinum 15 V2 Nominal Impedance Dual 2 Ohm (D2) RMS Power Handling (Conservative) 2,500 Watts Peak Power Handling 5,000 Watts Maximum Excursion (XMAX) 35MM Voice Coil 3-inch 8 Layer (20% Longer than V1) Motor Structure 13% Larger Motor, XL Triple Stacked Cone / Dust Cap Carbon Fiber Surround New High Roll Tooled Surround Spider / Leads 10" Spider Pack with Insulated Dual Leads Frame/Basket Cast Aluminum Frame RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 2.5 - 3.5 CU FT Tuning Frequency 28 - 33 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 11.25 INCHES Cutout Diameter 14.2363 INCHES Displacement 0.28 CUBIC FT
$699.99
-
RESILIENT SOUNDS ENTRY V2 12" DUAL 4 OHM SUBWOOFER
Premium Entry-Level Power and Authority The Resilient Sounds Entry V2 12" represents the peak of the new entry-level lineup, designed to maximize performance with a substantial 750W RMS power rating. This 12-inch subwoofer features significant enhancements in its motor and soft parts, including a robust 3-inch voice coil. This design yields massive increases in motor force (up to 43% in BL factor) over previous models, ensuring powerful and controlled bass. The Dual 4 Ohm impedance allows for wiring to a 2 Ohm or 8 Ohm final load, offering ideal flexibility for high-current mono amplifiers. Built to handle abuse, the RS V2 12" provides lasting, daily resilient bass performance. TECHNICAL SPECIFICATIONS Specification Detail Model RS 12 V2 RMS Power Handling 750 Watts Voice Coil 3" Nominal Impedance Dual 4 Ohm THIELE-SMALL PARAMETERS Sensitivity (SPL) 85.7 dB Resonance Frequency (Fs) 31.140 Hz BL Factor (BL) 28.793 DC Resistance (RE) 7.6 Ohms Mechanical Q (QMS) 3.023 Electrical Q (QES) 0.483 Total Q (QTS) 0.416 Compliance (CMS) 0.097 uM/N Moving Mass (MMS) 269.274 g Equivalent Volume (VAS) 38.831 L RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 1.5 - 2.25 CU FT Tuning Frequency 28 - 32 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 6.75 INCHES Cutout Diameter 11.14 INCHES
$239.99
-
RESILIENT SOUNDS ENTRY V2 10" DUAL 4 OHM SUBWOOFER
New and Improved Entry-Level Performance The Resilient Sounds Entry V2 10" is part of the new and improved entry-level model lineup, boasting significant upgrades in its soft parts and motor design. This 10-inch subwoofer is rated at a solid 600W RMS and features a 2.5-inch voice coil, contributing to notable performance increases, including a large jump in BL factor and motor strength. It is engineered for a lasting daily resilient performance with a focus on clean signal handling, making it an excellent balance of power, sound quality, and value. With a nominal impedance of Dual 4 Ohm, it can be wired for a final 2 Ohm or 8 Ohm load. TECHNICAL SPECIFICATIONS Specification Detail Model RS 10 V2 RMS Power Handling 600 Watts Voice Coil 2.5" Nominal Impedance Dual 4 Ohm THIELE-SMALL PARAMETERS Sensitivity (SPL) 84.9 dB Resonance Frequency (Fs) 36.940 Hz BL Factor (BL) 27.336 DC Resistance (RE) 8 Ohms Mechanical Q (QMS) 2.736 Electrical Q (QES) 0.426 Total Q (QTS) 0.368 Compliance (CMS) 0.17 uM/N Moving Mass (MMS) 171.257 g Equivalent Volume (VAS) 16.767 L RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 1.0 - 1.6 CU FT Tuning Frequency 32 - 36 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 5.75 INCHES Cutout Diameter 9.17 INCHES
$189.99
-
RESILIENT SOUNDS ENTRY V2 8" DUAL 4 OHM SUBWOOFER
Impressive Performance in a Compact 8-Inch Design The Resilient Sounds Entry V2 8" is a versatile and high-performing entry-level subwoofer designed to deliver outstanding low-end response while maintaining a compact form factor. This 8-inch woofer is conservatively rated at 500W RMS and features a double-stacked, FEA-optimized motor and a 2-inch voice coil. Its sturdy construction and optimized design ensure reliable performance and a remarkably resilient daily listening experience. With a nominal impedance of Dual 4 Ohm, it offers system flexibility, allowing for a final 2 Ohm or 8 Ohm load. TECHNICAL SPECIFICATIONS Specification Detail Model RS 8 V2 RMS Power Handling 500 Watts Voice Coil 2" Nominal Impedance Dual 4 Ohm THIELE-SMALL PARAMETERS Sensitivity (SPL) 80.9 dB Resonance Frequency (Fs) 35.728 Hz BL Factor (BL) 21.323 DC Resistance (RE) 8 Ohms Mechanical Q (QMS) 2.674 Electrical Q (QES) 0.488 Total Q (QTS) 0.413 Compliance (CMS) 0.16 uM/N Moving Mass (MMS) 123.556 g Equivalent Volume (VAS) 8.547 L RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 0.5 - 0.75 CU FT Tuning Frequency 30 - 34 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 5 INCHES Cutout Diameter 7.25 INCHES
$149.99
-
STETSOM BRAVO HQ 400.4 4-CHANNEL CAR AUDIO DIGITAL AMPLIFIER
The BRAVO HQ range was developed for car audio lovers looking for high performance and exceptional sound quality housed within a compact, discreet, and quiet amplifier design. The Stetsom Bravo HQ 400.4 delivers a clean 400 Watts RMS of power across its four independent channels. This amplifier is perfect for precise audio tuning, featuring 4 output channels compatible with bridge mode, and variable frequency cut and level controls. With an incredibly wide frequency response of 5Hz to 30kHz, the Bravo HQ 400.4 offers immense versatility, allowing it to be used successfully in a variety of projects, whether powering subwoofers, woofers, drivers, or tweeters. Its high Signal-to-Noise Ratio (> 90dB) ensures a clean, powerful listening experience. TECHNICAL SPECIFICATIONS Specification Detail Number of Channels 4 RMS Power 400W RMS RMS Power at 2 Ohm @ 12.6V 4 x 85W RMS RMS Power at 4 Ohm @ 12.6V 4 x 50W RMS RMS Power at 2 Ohm @ 14.4V 4 x 105W RMS RMS Power at 4 Ohm @ 14.4V 4 x 60W RMS RMS Power at 4 Ohm (BRIDGE @ 14.4V) 2 x 180W RMS Power @ 12.6V Bridge 4 Ohms 2 x 150W RMS (BRIDGE) Impedance Output 2 OHMS (STEREO) Supply Voltage 9V ~15.5V DC Frequency Response 5Hz ~30KHz Crossover Low Pass 50Hz ~ 2.3KHz (Variable) Crossover High Pass 50Hz ~ 2.3KHz (Variable) Signal to Noise >90dB Harmonic Distortion (T.H.D.) <1% Input Sensitivity (RCA / HIGH) RCA: 200mV ~ 8.0V / HIGH: 1.5V (Wire) Input Impedance (RCA / HIGH) RCA: 15K Ohms / HIGH: 1K Ohms Consumption with Signal Musical 17A Consumption with Signal Bass 34A Dimensions (H x W x D) mm 58.5 x 127 x 167 mm Weight Kg 640g
$114.99
-
STETSOM BRAVO HQ 800.4 MULTICHANNEL CAR AUDIO DIGITAL AMPLIFIER (2 OHMS STABLE - 800 WATTS RMS)
The BRAVO FULL line was meticulously developed for car audio enthusiasts seeking maximum performance and quality in amplifiers. The Stetsom Bravo HQ 800.4 delivers a robust 800 Watts RMS of power across four independent channels, capable of driving high-fidelity sound. With an expansive frequency response of 5Hz to 22kHz, this amplifier offers exceptional audio quality and definition across the full spectrum. This versatility allows it to be used seamlessly with subwoofers, woofers, drivers, and tweeters, making it the ideal core for a powerful and balanced sound system. Experience high-definition audio in a compact, reliable, and powerful digital package. TECHNICAL SPECIFICATIONS SPECIFICATION Detail Number of Channels 2 Input / 8 Output Graphic Equalizer 15 Bands (gain ±12dB) Graphic EQ Presets 12 (Flat, Loudness, Bass Boost, Rock, etc.) Parametric Equalizer 1 Input + 1 per Output (gain ±12dB, Factor Q 0.4 ~ 10.0) Crossover Filters Butterworth & Linkwitz-Riley (12/18/24/36/48 dB/8ª) Routing A, B, or A+B (per output) Alignment (Delay) 0 ~ 8 ms (275 cm) High Accuracy Phase Inversion 0° ~ 180° Limiter Dynamic Attack-Release System (Threshold: -24 ~ 0 dB) Master Level & Gain 0 ~ 100% (Gain -45 ~ +15 dB per output) Audio Generator 10 Hz ~ 22 kHz (Tone, Sweep, Pink Noise) Latency 1.08 ms Max. Input/Output Voltage 5.6 Vpp (+8.2 dBu) Signal-to-Noise Ratio >90 dB Total Harmonic Dist. (T.H.D) <0.01% Channel Separation >80 dB Frequency Response 10 Hz ~ 22.5 kHz @ -1 dB Power Supply 10 V ~ 15 V DC Max. Current Consumption 450 mA @ 12.6 V DC Dimensions (L x W x H) 200 × 101 × 37 mm (7.9 × 4.0 × 1.5 in)
$206.99
-
Ciare Ciare | CT441 | 1.75" Neodymium Horn Tweeter (500W Program, 8Ω)
The Ciare CT441 is a high-performance 1.75" neodymium horn tweeter engineered for professional audio applications demanding exceptional clarity and power handling. With a continuous power rating of 500W and a sensitivity of 110 dB, it delivers crisp, detailed high frequencies, making it ideal for high-output sound reinforcement systems, PA speakers, and custom audio builds. Designed with a planar Mylar diaphragm and an aluminum voice coil, the CT441 ensures rapid transient response and minimal distortion. Its compact neodymium motor structure provides a high flux density of 1.65 T, contributing to its lightweight design without compromising on performance. The recommended crossover frequency is 2 kHz, allowing seamless integration into two-way or three-way speaker systems. Whether you're designing a new speaker system or upgrading an existing one, the Ciare CT441 offers the reliability and sonic precision needed for professional-grade audio reproduction. Specifications Nominal Diameter: 44 mm (1.75 in) Nominal Impedance: 8Ω Continuous Power Handling: 500W Nominal Power Handling: 250W Sensitivity: 110 dB (2.83V/1m) Frequency Range: 2 kHz – 20 kHz Recommended Crossover: 2 kHz Voice Coil Diameter: 44 mm (1.75 in) Voice Coil Winding Material: Aluminum Flux Density: 1.65 T Winding Depth: 2.7 mm (0.11 in) Diaphragm Material: Mylar Cone Shape: Planar Connection Type: Faston Mounting Type: 4-bolt Overall Diameter: 112 mm Baffle Cutout Diameter: 95 mm (3.75 in) Flange and Gasket Thickness: 4 mm (0.16 in) Bolt Circle Diameter: 116 mm (4.57 in) Depth: 68 mm (2.68 in) Net Weight: 0.8 kg (1.76 lb) Basket Material: Aluminum Bolt Diameter: 4.5 mm (0.18 in)
$164.28
-
Ciare Ciare | 8A250MS-8 | 8″ Sealed-Back Midrange (250 W Program, 8 Ω)
The Ciare 8A250MS-8 is an 8″ sealed-back midrange driver engineered to deliver clarity, reliability, and consistent performance in demanding audio systems. By combining a closed-rear acoustic design with a robust copper voice coil and ferrite motor structure, this driver thrives in compact or constrained enclosures—delivering midband precision without needing large rear volumes. With a 1.5″ copper voice coil on a polyimide former and a ferrite magnet system, the 8A250MS-8 handles up to 250 W (program) with low distortion and stable behavior through its intended midrange band. The sealed back reduces back-wave interference and gives designers more freedom in enclosure layout, making it ideal for custom cabinetry, studio monitors, or high-fidelity two- or three-way systems. If you’re building midrange stages where space, acoustic isolation, or mechanical robustness matter, the 8A250MS-8 is a compelling option. You’ll get the musical detail and consistency that Ciare’s “Americano” series is known for, while benefiting from the enclosed design that simplifies integration in tighter build spaces. Specifications Driver Type: Sealed-back midrange Nominal Diameter / Frame: 8″ (203 mm) Impedance: 8 Ω Power Handling (Continuous): 125 W Power Handling (Program): 250 W Resonance (Fs): 425.13 Hz Usable Frequency Range: 350 Hz – 4.8 kHz Voice Coil: 1.5″ (38 mm) copper, polyimide former Magnet / Motor: Ferrite (Americano line standard) Design Feature: Sealed back (closed housing)
$69.99
-
Ciare Ciare | 6A200MS-8 | 6.5″ Sealed-Back Midrange (200W Program, 8 Ω)
The Ciare 6A200MS-8 is a sealed-back 6.5″ midrange driver built for audio systems demanding clarity, robustness, and compact installation flexibility. Its closed-back structure blocks rear-wave interference and allows use even in tight enclosures or behind panels, while maintaining midrange detail and neutrality. Excellent for high-fidelity 2- or 3-way speakers, critical vocal reproduction, or pro audio installations. Designed with a 1.5″ copper voice coil on a polyimide former and powered by a ferrite motor, this midrange handles up to 200 W (program) with fidelity. The 8 Ω impedance makes it suitable for systems where higher load impedance is required, giving more headroom and crossover flexibility. Its sealed housing ensures stable acoustic behavior without reliance on internal volume, enabling predictable performance across installations. Choose the 6A200MS-8 when you need precise mids in a compact, acoustically isolated package. It’s ideal for installers, OEMs, or audiophiles looking for professional build quality, musical transparency, and durable construction in a sealed configuration. Specifications Driver Type: Sealed-Back Midrange Nominal Diameter: 6.5″ (165 mm) Impedance: 8 Ω Power Handling: 100 W RMS / 200 W Program Voice Coil: 1.5″ (38 mm) copper wound, polyimide former Magnet / Motor: Ferrite motor assembly Frame / Basket: Rigid steel frame Enclosure Design: Fully sealed back for rear wave control Use Cases: Compact speaker enclosures, pro audio midrange, vocal clarity systems
$59.99
-
Sundown Audio Horizon HZS 10" Subwoofer
Sundown Audio HZS Series SubwoofersPurpose-Built for Tight Installs. Powered by Real Performance.The Sundown Audio HZS Series was engineered from the ground up to bring powerful, clean bass to space-limited installations—without sacrificing output, reliability, or thermal performance. Whether you’re working with a slim enclosure behind a truck seat, under a rear deck, or in a stealth build, the HZS delivers the kind of low-end impact you expect from Sundown.Available in 10" and 12" sizes, the HZS is a shallow-mount subwoofer rated for 600 watts RMS and designed to thrive in ported enclosures, though sealed options are also supported. Each model features a 2.5" black aluminum voice coil, a high-roll surround, a progressive spider, and a vented motor design that keeps things cool when the music gets loud.Built for daily abuse and engineered for clean excursion, the HZS combines strength, efficiency, and low-profile fitment into one aggressive package. It’s the ideal solution when you want true bass performance without giving up precious install depth.Key Features: RMS Power: 600W Voice Coil: 2.5" black aluminum former - Dual 4Ω Cooling: Vented motor gap and solid pole piece Suspension: High-roll surround and progressive spider Lead Wires: Stitched mini-XL tinsel leads for long-term durability Motor Assembly: Bolt-through design for mechanical strength Mounting Depth: Compact profile for shallow, space-restricted enclosures Best Use: Ported enclosures for optimal output; sealed compatible
$244.99
-
Sundown Audio Horizon HZS 12" Subwoofer
Sundown Audio HZS Series SubwoofersPurpose-Built for Tight Installs. Powered by Real Performance.The Sundown Audio HZS Series was engineered from the ground up to bring powerful, clean bass to space-limited installations—without sacrificing output, reliability, or thermal performance. Whether you’re working with a slim enclosure behind a truck seat, under a rear deck, or in a stealth build, the HZS delivers the kind of low-end impact you expect from Sundown.Available in 10" and 12" sizes, the HZS is a shallow-mount subwoofer rated for 600 watts RMS and designed to thrive in ported enclosures, though sealed options are also supported. Each model features a 2.5" black aluminum voice coil, a high-roll surround, a progressive spider, and a vented motor design that keeps things cool when the music gets loud.Built for daily abuse and engineered for clean excursion, the HZS combines strength, efficiency, and low-profile fitment into one aggressive package. It’s the ideal solution when you want true bass performance without giving up precious install depth.Key Features: RMS Power: 600W Voice Coil: 2.5" black aluminum former - Dual 4Ω Cooling: Vented motor gap and solid pole piece Suspension: High-roll surround and progressive spider Lead Wires: Stitched mini-XL tinsel leads for long-term durability Motor Assembly: Bolt-through design for mechanical strength Mounting Depth: Compact profile for shallow, space-restricted enclosures Best Use: Ported enclosures for optimal output; sealed compatible
$259.99
