Ampere Audio

100w 6.5" Coaxial Set Thank you for purchasing the Ampere Audio 6.5sc Dream Series speaker system. The 6.5sc features an adjustable swivel 25mm silk dome tweeter that resides in a hardened plastic housing. The 6.5” midrange also features a single roll surround that eliminates unwanted resonances, acoustical artifacts and dampens mechanical vibrations. The tweeter and midrange have been specifically engineered with complex FEA analysis that perfectly optimizes the motor structures. Engineering a great tweeter and midrange is not enough to guarantee excellent sound quality so we added a touch of SQ dust. Features 25mm Silk Dome Tweeter Fully Machined Hardened Plastic Tweeter Housing Dampened Pressed Paper Cone Smooth Termination Single Rubber Surround Powder Coated Aluminum Basket Custom Tooled Crossover with Direct Wiring Connections Audiophile 5 kHz Crossover with Tweeter Integrated Non Resonating Phase Plug Inter woven Tinsel Leads High Temperature CAE/CAD Motor Structure Specifications RMS Power: 100W Peak Power: 150W Nominal Impedance: 4 ohms Fs: 91.875 BL: 4.183 Qms: 7.634 Qes: 1.094 Qts: 0.957 SPL: 88.6 Vas: 6.599 Cms: 280.661 Mms: 10.692 Our Recommendation The Ampere Audio AA-6.5sc is a perfect match for our class A/B AA-75.4 4-channel amplifier. Get them both to see what perfection sounds like!

Read more less

100w 6.5" Component Set The Ampere Audio 6.5c Dream Series speaker system features a 25mm silk dome tweeter that resides in a hardened plastic housing. The 6.5” midrange also features a single roll surround that eliminates unwanted resonances, acoustical artifacts and dampens mechanical vibrations. The tweeter and midrange have been specifically engineered with complex FEA analysis that perfectly optimizes the motor structures. Engineering a great tweeter and midrange is not enough to guarantee excellent sound quality so we added a touch of SQ Dust. The overall result is a smooth, linear musical output with excellent spectral clarity without delivering overly bright or fatiguing high frequencies commonly found in most car audio component systems. The Dream Series speaker system provides a dynamic range and a life like musical realism that would please just about any audiophile. Features 25mm Silk Dome Tweeter Fully Machined Hardened Plastic Tweeter Housing Dampened Pressed Paper Cone Smooth Termination Single Rubber Surround Powder Coated Aluminum Basket Custom Tooled Crossover with Direct Wiring Connections Audiophile 5 kHz Crossover with Tweeter Integrated Non Resonating Phase Plug Inter woven Tinsel Leads High Temperature CAE/CAD Motor Structure Specifications RMS Power: 100W Peak Power: 150W Nominal Impedance: 4 ohms Fs: 89.57 BL: 5.5 Qms: 4.29 Qes: 0.708 Qts: 0.608 SPL: 90.2 Vas: 6.629 Cms: 281.92 Mms: 11.17 Our Recommendation The Ampere Audio AA-6.5c is a perfect match for our class A/B AA-75.4 4-channel amplifier. Get them both to see what perfection sounds like!  

Read more less

Ampere Audio AA-12K | 12,000W Class D Mono Block Amplifier Power. Precision. Domination.Meet the AA-12K — Ampere Audio’s flagship digital monoblock amplifier built for those who demand nothing less than total control and raw output. Whether you’re competing, demoing, or just living loud, the AA-12K delivers uncompromising performance with brutal force and unwavering clarity. Designed with hardcore bassheads and audiophiles in mind, this beast pushes up to 12,000 watts RMS at 1 ohm — and a staggering 24,000 watts when strapped. Built with advanced Class D technology, a dual MOSFET PWM power supply, and elite-grade efficiency, the AA-12K is engineered to dominate the lanes, flex hard in demos, and outperform anything in its class. But this amp isn’t just about brute strength — it’s also about smart control. With a wired remote that displays voltage, temperature, and clipping, plus independent crossovers and adjustable phase, the AA-12K gives you precise command over your soundstage. This is power that listens. Technical Specifications: Power Output (RMS @ 14.4V): 1 Ohm Mono: 12,000W 2 Ohm Mono: 7,000W 4 Ohm Mono: 4,000W 2 Ohm Strapped (Linked): 24,000W General: Class D Digital Monoblock Design Dual MOSFET PWM Power Supply Efficiency: > 97% (at 4 Ohms) Input Sensitivity: 6V – 0.2V Frequency Response: 15Hz – 264Hz Signal-to-Noise Ratio: 91 dB Damping Factor: > 400 THD: < 0.1% Working Voltage: 9V – 16.5V Controls & Filters: Low Pass Filter: 35Hz – 250Hz (24 dB/Oct) Subsonic Filter: 10Hz – 50Hz (24 dB/Oct) Bass Boost: 0 – 9 dB @ 45Hz Phase Shift: 0 – 180° Connectivity & Extras: RCA Inputs/Outputs (for Master/Slave Linking) Wired Remote Control with: Voltage Display Temperature Display Clipping Indicator Protection Features: Thermal Voltage Speaker Short DC Offset Fuse Rating: 1000A (External – not built-in) Dimensions: 27.55" (L) x 11.82" (W) x 3.06" (H)

Read more less

100w 6x9" Coaxial Set When it comes to sound quality, the Ampere Audio AA-BI9 TL speakers are built from the ground up to be above par musical experiences. The wide frequency range delivers a pleasurable but aggressive Sound Quality Eargasm (SQE). The bass, midrange and treble all are very balanced giving you and all around excellent speaker. The AA-BI9 TL speakers are equipped with a silk dome tweeter which allows for smooth but strong high-frequency response. Additionally, the built-in crossover network streams audio frequencies to the proper driver – lows to the woofers, and highs to the tweeters so your music sounds like it’s coming from a live concert. Features 25mm Silk Dome Tweeter Fully Machined Hardened Plastic Tweeter Housing Dampened Pressed Paper Cone Smooth Termination Single Rubber Surround Powder Coated Aluminum Basket Custom Tooled Crossover with Direct Wiring Connections Audiophile 5 kHz Crossover with Tweeter Integrated Non Resonating Phase Plug Inter woven Tinsel Leads High Temperature CAE/CAD Motor Structure Specifications RMS Power: 100W Peak Power: 120W Nominal Impedance: 4 ohms Fs: 69 BL: 4.493 Qms: 3.5 Qes: 1.105 Qts: 0.840 SPL: 90.1 Vas: 22.113 Cms: 329.612 Mms: 16 Our Recommendation The Ampere Audio AA-BI9 TL is a perfect match for our class A/B AA-75.4 4-channel amplifier. Get them both to see what perfection sounds like!

Read more less

50w 3″ Mid The Ampere Audio AA-3DS mids are a perfect match for both our pro series tweets and our crisp component sets. The AA-3DS mids are designed to be the perfect addition for a 3 way setup. Add them in addition to our AA-6.5c and hear perfection. Features Dampened Pressed Paper Cone Smooth Termination Single Rubber Surround Powder Coated Aluminum Basket Inter woven Tinsel Leads High Temperature CAE/CAD Motor Structure Specifications RMS Power: 50W Nominal Impedance: 4 ohms Fs: 121.651 BL: 2.641 Qms: 2.542 Qes: 0.773 Qts: 0.593 SPL: 86.4 Vas: 1.214 Cms: 776.426 Mms: 2.204 Our Recommendation The AA-3DS mids are designed to be the perfect addition for a 3 way setup. Add them in addition to our AA-6.5c and hear perfection.

Read more less

100w 5.25" Coaxial Set Thank you for purchasing the Ampere Audio 5.25sc Dream Series speaker system. The 5.25sc features an adjustable swivel 25mm silk dome tweeter that resides in a hardened plastic housing. The 5.25” midrange also features a single roll surround that eliminates unwanted resonances, acoustical artifacts and dampens mechanical vibrations. The tweeter and midrange have been specifically engineered with complex FEA analysis that perfectly optimizes the motor structures. Engineering a great tweeter and midrange is not enough to guarantee excellent sound quality so we added a touch of SQ dust. The overall result is a smooth, linear musical output with excellent spectral clarity without delivering overly bright or fatiguing high frequencies commonly found in most car audio coaxial systems. The Dream Series speaker system provides a dynamic range and a life like musical realism that would please just about any audiophile. Features Coming soon... Specifications RMS Power: 100W Nominal Impedance: 4 ohms More Information coming soon...

Read more less