Marine Amplifiers

MB Quart compact 400 watt mono Powersports amplifier to for a subwoofer with on-board equalization and simple installation with quick release connectors.   Weight 2.09 lbs Type Amplifier Brand MB Quart Series Nautic Category Marine, Powersports Condition New Color Black Warranty 1 Year Amp Class Full Range Class D Amp Total Channels Mono Amp Max Power (watts) 400 Amp Power @ 2 Ohms (ch x watts) 1 x 400 Amp Power @ 4 Ohms (ch x watts) 1 x 200 Amp Crossover Electronic Amp Variable Low Pass Crossover 12dB per Octave 300Hz Amp Bass Boost 0-12dB @ 45Hz Amp Subsonic Filter 60Hz Amp Variable Voltage 0.2-9V Amp Signal to Noise > 100dB Amp Frequency Response 10Hz-300Hz Amp Speaker Level Audio Inputs RCA Amp Power Terminal 12v/GND Molex 10 GA Amp Speaker Terminal Wire Gauge Molex Plug Connector Amp Fusing 30A x 1 Proposition 65 Notice ​WARNING: This product can expose you to chemicals including LEAD, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Read more less

350 x 2 @ 4 ohms (bridged) 175 x 4 @ 2 ohms 100 x 4 @ 4 ohms Variable 12dB filter: 50Hz-500Hz Power and protection indicators included Thermal, voltage, and speaker short protection circuitry Waterproof (IP67 rated) Bluetooth receiver built-in Sealed wire/signal bulkheads Gasketed audio control cover RCA line out Our SAMv.2 amplifiers are ideal for your boat, bike or UTV. On the trail or on the road, this micro amplifier fits in tight spaces, but don’t let the size fool you - they pack some big power. SAM-series amps are rated IP67, certified to withstand full submersion when getting wild off-road, or when its time to clean up when the fun is done. Both of our multi-channel amps have built-in Bluetooth, so a source unit is not needed! Just sync to your phone and enjoy! Ready to go big? With the included line output, it’s easy to add additional amplifiers to the system.

Read more less

KXMA Amps are built for the outdoors. Gain, crossover and bass-boost controls are protected behind a gasket-sealed panel, as is the control cover hiding the settings, creating a water-resistant barrier to key controls. Real Marine™ The KICKER Real Marine standard means your amplifier is purpose-built for your boat. Every KXMA (and KMA)-Series amp comes complete with anti-corrosive speaker, power and RCA terminals, stainless-steel screws, conformal-coated circuit boards and ABYC/NMMA-compliant power connections. KICKER products also undergo rigorous testing to ensure they meet or exceed marine industry standards for UV, humidity and saltwater exposure. This unparalleled commitment to engineering quality and maritime safety is why our products truly are "Real Marine." KickEQ™ delivers as much as an 6dB of extra bump with a simple turn of the knob. A powerful 24dB crossover is also included, letting you quickly tune your system to perfection. A full-range RCA output allows you to easily add another amplifier without running new signal cable to your KICKER KMC Media Center. Class D Amplifier Gain Control With "Gain Match" LED Indicator FIT2™ (Fail-safe Integration Technology) Circuitry Variable 24dB Crossover DSP-Controlled Preamp KickEQ™ 6dB Variable Bass Boost ABYC/NMMA-Compliant Power Terminals Conformal-Coated Circuit Boards Easy Access to Settings behind Gasket-Sealed Cover Panel Black Anodized Aluminum Chassis Top-Mounted, Teal LED Light Pipe Stainless-Steel Mounting Hardware Included Want setup help? Go to KICKER U for a free woofer-and-amp configuration app! This KXMA amplifier delivers as much as 125 watts into four full-range channels, or 250 watts into two sets of bridged channels. See below for more details. Specifications POWER [watts/ch], 2 OHM STEREO 125 x 4 POWER [watts/ch], 4 OHM STEREO 75 x 4 POWER [watts/ch], 4 OHM BRIDGED MONO: 250 x 2 DYNAMIC POWER [watts]: 700 DIMENSIONS [in] all models 2-1/8H x 8-5/16W x ___L 11-3/16 DIMENSIONS [cm] all models 5.4H x 21.0W x ___L 28.4 FREQUENCY RESPONSE [Hz] 10-20k, +0/-1dB INPUT SENSITIVITY High Level 250mV-10V, Low Level 125mV-5V SIGNAL-TO-NOISE RATIO >95dB, a-weighted, re: rated power ACTIVE CROSSOVER (amp 1) 24dB/octave, variable 10-5kHz w/ 10x switch, selectable high pass, low pass or all pass (amp 2) 24dB/octave, variable high pass 10-500Hz, variable low pass 40-5kHz w/10x switch, selectable high pass, low pass, all pass or band pass KickEQ™ BOOST Variable 0-6dB, centered @ 40Hz (Only on amp 2) COMES WITH WIRED REMOTE No

Read more less

1000 @ 1 ohm 700 @ 2 ohms 400 @ 4 ohms Variable 12dB low pass filter: 50Hz-250Hz Variable 18dB bass boost Power and protection indicators included Thermal, voltage, and speaker short protection circuitry Waterproof (IP67 rated) Sealed wire/signal bulkheads Gasketed audio control cover RCA line out Sundown SAMv.2 amplifiers are ideal for your boat, bike or UTV. Whether you play in the mud, sand, dirt or asphalt, this micro amplifier performs in any weather, and with all the power and acoustic control you need to bang out the bass! SAM amps are IP67 rated, certified to withstand full submersion when getting wild off-road, or when its time to clean up when the fun is done. Ready to go big? With the included line output, it’s easy to add additional amplifiers to the system.  Time to ride!

Read more less

600 @ 1 ohm 415 @ 2 ohms 230 @ 4 ohms Variable 12dB low pass filter: 50Hz-250Hz Variable 18dB bass boost Power and protection indicators included Thermal, voltage, and speaker short protection circuitry Waterproof (IP67 rated) Sealed wire/signal bulkheads Gasketed audio control cover RCA line out Sundown SAMv.2 amplifiers are ideal for your boat, bike or UTV. Whether you play in the mud, sand, dirt or asphalt, this micro amplifier performs in any weather, and with all the power and acoustic control you need to bang out the bass! SAM amps are IP67 rated, certified to withstand full submersion when getting wild off-road, or when its time to clean up when the fun is done. Ready to go big? With the included line output, it’s easy to add additional amplifiers to the system.  Time to ride!

Read more less

MB Quart 160 Watt Powered OFF-ROAD & Marine Multimedia Source Unit. Specifications: Weight 1.9 lbs Type Source Unit Brand MB Quart Series Nautic Category Marine, Powersports, RV Condition New Color Black Warranty 1 Year IPX Rating IPX67 Source Unit Tuner Section FM Stereo Frequency Range 87.5MHz-108MHz Source Unit Tuner Section S/N Ratio > 55dB Source Unit Bluetooth Range (ft) 32 Source Unit RMS Power Output (watts) 4 x 20 Source Unit Peak Power Output (watts) 4 x 40 Source Unit S/N @1W 81.2dBA Source Unit Frequency Response (Aux In) 20Hz-20kHz Source Unit Pre-amp Outputs (Y/N #) 1 CVBS Video Output, 3 Pair Front/Rear/Subwoofer, Yes Source Unit Pre-amp Voltage 2.0V Single Ended (4.0V) Source Unit Minimum Impedance (ohms) 4 Source Unit Display Type 3.3 inch full color round LED panel Source Unit Dimensions Mounting Hole (in) 3.12 Source Unit Dimensions Total Mounting Depth (in) 2.87 Additional Details MAXIMUM THD+N AT 4 OHMS: 81.2dBA, EFFICIENCY AT FULL POWER 4 OHM (1KHZ): 0.639, IDLE CURRENT: 0.3A, MAXIMUM UNDISTORTED PREAMP VOLTAGE (WITH 20K OHM LOAD): 4 Volts, SIGNAL TO NOISE (CTA-2006B): Bluetooth -76.2dBA / Aux -86.4dBA, SIGNAL TO NOISE RATIO OF LINE LEVEL OUTPUTS (AT MAX VOLUME): Bluetooth -76.2dBA / Aux -86.4dBA, PREAMP FREQUENCY RESPONSE (+/- 3.0DB): Bluetooth 20Hz-20KHz / Aux 20Hz-20KHz, AMPLIFIER FREQUENCY RESPONSE (+/- 3.0DB): Bluetooth 20Hz-20KHz / Aux 20Hz-20KHz, STEREO SEPARATION (AUX INPUT): -64.1dB @ 5kHz, FM MONO USABLE SENSITIVITY: 13dBf / 2.5μV, AM MONO USABLE SENSITIVITY: 15-16μV Proposition 65 Notice ​WARNING: This product can expose you to chemicals including LEAD, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Read more less

Experience the perfect way to get bass on your boat! A mighty Class-D power plant, 12dB crossover and subsonic filter all help you dial in the best sound. Use the remote level control to adjust the bass right from the dash and connect the full-range RCA outputs to expand your system! Ultra-Efficient Class D Design 800 Watts of Dynamic Power Mono Amplifier Conformal-Coated Circuit Board KMBLC Remote Level Control Included Variable 12dB Crossover KickEQ™ Variable 6dB Bass Boost Fixed 25Hz Subsonic Filter RCA Pass Through Output Real Marine™ ABYC/NMMA-Compliant Power Connections 316L Stainless-Steel Hardware Included Want setup help? Go to KICKER U for a free woofer-and-amp configuration app! This KM-Series marine amplifier delivers 800 watts into one channel. See below for more details. Product highlights: Mono Marine Amplifier 300 watts RMS x 1 at 4 ohms 600 watts RMS x 1 at 2 ohms 800 watts RMS x 1 at 1 ohm CEA-2006 compliant Class A/B design Variable low-pass filter (50-200 Hz, 12 dB/octave) Subsonic filter (25 Hz, 24 dB/octave) Variable bass boost (0-6 dB at 40 Hz) Other Features: Weather-resistant conformal-coated circuit boards Stainless-steel no-rust hardware Remote control included Wiring and hardware not included with amplifier 4-gauge power and ground leads and a 100-amp fuse recommended Frequency response: 25-200 Hz Dimensions: 8"W x 2-1/4"H x 6-5/8"D MFR # 48KMA8001   What's in the box: Kicker KMA800.1 owner's manual Mono marine amplifier KMBLC Remote bass level control 19.5' Remote cable (RJ-11 connectors on both ends) Two 3/8" screws Four 3/4" screws Allen key Quickstart guide (Eng/Span/Fren/Other) Power chart Kicker power certification

Read more less

KXM Amplifiers are built for fun, no matter where you go. Power, speaker and input connections are gasket-sealed, as is the control cover hiding the settings, creating a water-resistant barrier to key components. KXMA1200.1 Amplifier The KXM 1200-watt mono amplifier uses Class D technology for huge power in a small chassis. KickEQ+™ provides an enormous 18dB of variable bass boost, while a powerful 24dB crossover and subsonic filter to give you the acoustic control to quickly perfect your sound. A wireless controller is also included for perfecting your sound on the fly. Monitor and adjust gain, bass boost, clipping and more without leaving the driver's seat! Features: Class D Power Plant One-Ohm Stable SHOCwave™ Bass Restoration Processor KXARC Wireless Remote Included Gain Control With "Optimal Input" Indicator Variable 24dB Subsonic Filter FIT2™ (Fail-Safe Integration Technology) Circuitry Variable 24dB Crossover DSP-Controlled Preamp KickEQ+™ 18dB Variable Bass Boost ABYC/NMMA Compliant Power Terminals Conformal-Coated Circuit Boards Easy Access to Settings behind Gasket-Sealed Cover Panel Black Anodized Aluminum Chassis Top-Mounted Teal LED Light Pipe Stainless Steel Mounting Hardware Included Want setup help? Go to KICKER U for a free woofer & amplifier configuration app! This KXM amplifier delivers as much as 1200 watts into one channel. See below for more details. Specifications RMS Power [Watts] @ 14.4V, 4Ω mono, ≤ 1% THD+N : 600 x 1 @ 14.4V, 2Ω mono, ≤ 1% THD+N : 1200 x 1 @ 14.4V, 1Ω mono, ≤ 1% THD+N : +/- 10% Length [in, cm] 9-9∕16 , 24.4 Height [in, cm] 2-⅛, 5.5 Width [in, cm] 8-5⁄16 , 21 Frequency Response ± 1dB 10Hz–160Hz Signal-to-Noise Ratio 95dB Input Sensitivity 250mV–10V Selectable Electronic Crossover Variable Lo-pass 40Hz–160Hz, 24dB/octave Subsonic Filter Variable 10–80Hz, 24dB/octave KickEQ+™ Parametric Bass Boost (Remote Control Adjustable) Boost - Variable 0-18db Center Frequency - 20Hz-80Hz Bandwidth 1-5 Remote Bass Yes CEA Power 600 x 1 @ 4 ohms, 14.4VDC, 1% THD, CEA-2006B (Watts) CEA Signal-to-Noise Ratio -75dB CEA-2006B (ref: 1W, A-weighted)

Read more less

1,500 @ 1 ohm 1,130 @ 2 ohms 700 @ 4 ohms Variable 12dB low pass filter: 50Hz-250Hz Variable 18dB bass boost Power and protection indicators included Thermal, voltage, and speaker short protection circuitry Waterproof (IP67 rated) Sealed wire/signal bulkheads Gasketed audio control cover RCA line out Sundown SAMv.2 amplifiers are ideal for your boat, bike or UTV. Whether you play in the mud, sand, dirt or asphalt, this micro amplifier performs with all the power and acoustic control you need to bang out the bass! SAM amps are IP67 rated, certified to withstand full submersion when getting wild off-road, or when its time to clean up when the fun is done. Ready to go big? With the included line output, it’s easy to add additional amplifiers to the system.  Time to ride!

Read more less

540 x 1 @ 4 ohms 270 x 2 @ 2 ohms 150 x 2 @ 4 ohms Variable 12dB filter: 50Hz-500Hz Power and protection indicators included Thermal, voltage, and speaker short protection circuitry Waterproof (IP67 rated) Bluetooth receiver built-in Sealed wire/signal bulkheads Gasketed audio control cover RCA line out Our SAMv.2 amplifiers are ideal for your boat, bike or UTV. On the trail or on the road, this micro amplifier fits in tight spaces, but don’t let the size fool you - they pack some big power. SAM-series amps are rated IP67, certified to withstand full submersion when getting wild off-road, or when its time to clean up when the fun is done. Both of our multi-channel amps have built-in Bluetooth, so a source unit is not needed! Just sync to your phone and enjoy! Ready to go big? With the included line output, it’s easy to add additional amplifiers to the system.

Read more less

MB Quart 46 Inch Universal Overhead System, 4 Speaker with a GMR-LCD. AM/FM, waterproof Bluetooth source unit with built-in 160 watts of power, Android® and Apple® control. The MBQOH46-1 can fit the following applications: Can-Am Maverick X3, Can-Am Maverick, Can-Am Commander, Polaris Ranger, Polaris General, Honda Big Red, John Deere XUV, John Deere RSX, Kymco, Kubota, Yamaha Rhino, and Yamaha YXZ.

Read more less

KXMA400.2 Marine Amplifier KickEQ™ delivers as much as an 6dB of extra bump with a simple turn of the knob. A powerful 24dB crossover is also included, letting you quickly tune your system to perfection. A full-range RCA output allows you to easily add another amplifier without running new signal cable to your KICKER KMC Media Center. Class D Amplifier Gain Control With "Gain Match" LED Indicator FIT2™ (Fail-safe Integration Technology) Circuitry Variable 24dB Crossover DSP-Controlled Preamp KickEQ™ 6dB Variable Bass Boost ABYC/NMMA-Compliant Power Terminals Conformal-Coated Circuit Board to resist moisture Easy Access to Settings behind Gasket-Sealed Cover Panel Black Anodized Aluminum Chassis Top-Mounted, Teal LED Light Pipe Stainless-Steel Mounting Hardware Included Want setup help? Go to KICKER U for a free woofer-and-amp configuration app! This KXMA amplifier delivers as much as 200 watts into two full-range channels, or 400 watts into one bridged channel. See below for more details. Product highlights: 2-channel marine amplifier 100 watts RMS x 2 at 4 ohms 200 watts RMS x 2 at 2 ohms 400 watts RMS x 1 bridged at 4 ohms (4-ohm stable in bridged mode) CEA-2006 compliant Class D amp technology Gain knob also functions as clip light Variable high-pass filter (10-500 Hz, 24 dB/octave) Variable low-pass filter (40-500 Hz, 24 dB/octave) with 10x switch Bandpass engages both high- and low-pass filters Variable bass boost (0-6 dB at 40 Hz) Other Features: Weather-resistant conformal-coated circuit boards Front-mounted controls protected behind gasket-sealed fold-down door Fail-Safe Integration Technology eliminates noise from your vehicle's electrical system Preamp and speaker-level inputs (speaker wire to RCA adapter required for speaker-level input)) Preamp outputs Wiring and hardware not included with amplifier 8-gauge power and ground leads and a 60-amp fuse recommended for multiple amplifiers, an additional 60-amp in-line fuse between the distribution block and this amplifier is recommended Dimensions: 9-9/16"W x 2-3/16"H x 8-5/16"D

Read more less

Wet Sounds™ Hydro-Tech™ X (HTX) Series Amplifier. Wet Sounds represents the ultimate in High Performance Marine Audio. Wet Sounds HTX Series Marine Amplifiers are designed to be a complete solution for every type of extreme marine application. HTX amplifiers use superior performance circuitry by utilizing Class D Power Supplies.   These amplifiers have extreme power output packed inside a small chassis, thermal overload protection, flexible crossovers, extended inputs. HTX amplifiers are a well balanced match for all of the Wet Sounds™ products.   We’ve engineered these amps not just to deliver great sound but to hold up to a demanding marine environment full of water, waves, vibrations, and sun. Completely sealed and saltwater-compliant, Hydrotech Marine amp features include:   Features   • Optimized performance circuitry, with class-D power supplies   • Extreme power output packed inside a small chassis   • Thermal overload protection   • Flexible crossovers and extended inputs   • High-mass heat sink   • Smart microprocessor for great electronic performance   • Supports Wet Sounds’ extensive CrossOver network   • Protected by our standard 2-year limited warranty so you can party with confidence RMS Power @ 4 ohm Stereo 150 x 2 watts RMS @ < 1.0% THD   RMS Power @ 2 ohm Stereo 300 x 2 watts RMS @ < 1.0% THD   RMS Power @ 4 ohm Mono 600 x 1 watts RMS @ < 1.0% THD   Input Sensitivity Variable from 0.2V to 6.0V   Crossover Range Low Pass 50Hz - 250Hz 12dB/Octav   Crossover Range Subsonic Filter 50Hz - 250Hz 12dB/Octav   S/N Ratio (Awtg) >60dB (1 watt 4 Ohm) | >99dB (125 watts 4 Ohm)   Remote Attenuation +0.7 - -29dB   Channels 2   Frequency Response -3dB 20Hz-20KHz   Series HTX  

Read more less

  The STX Micro-1 and STX Micro-4 Compact chassis Class D Amplifiers by Wet Sounds, are the latest innovative products designed for the Power Sports enthusiast. The small yet powerful amplifiers are designed with a completely sealed die cast aluminum chassis for maximum protection against water and dirt intrusion. Both STX models are outfitted with 3.5mm signal input connections to work seamlessly with our Bluetooth controllers (BTVCC) or direct connection to most smart phone’s headphone output. The STX Micro-1 mono block subwoofer amplifier has output power capability of 420Wx1 into 2 Ohms & 600 Wx1 into 1 Ohm and also includes fully variable Bass Boost and adjustable low pass crossover. The STX Micro-4 has a rated output power capability of 80wx4 into 4 Ohms & 130 Wx4 into 2 Ohms. Bridged power on the STX Micro-4 is 280Wx2 into 4 Ohms, with fully variable high pass/low pass crossovers. A set of pass-through outputs on the STX Micro-4 allows connection to a second amplifier, and the multichannel switching mode enables all four channels of output with only 2 channels of input, eliminating the need for Y adaptors.   Created for the limited space in many ATV/UTV vehicles, with a chassis size of 9.25 inches long, 4 inches wide, and a height of 1.5 inches, the STX Micro-1 and STX Micro-4 pack amazing power into a minimum footprint!   Power Output @ 4 OHMS 80W x 4   Power Output @ 4 OHMS 280W x 2   Power Output @ 2 OHMS 130W x 4   S/N Ratio @ 1 Watt > 95dB   Frequency Response 10 Hz – 40 kHz   Total Harmonic Distortion 0.05%   Input Sensitivity Range 150mV – 7V   Dimensions 9.25” L x 4” W x 1.5” H   Channels 4   Series Stealth STX    

Read more less