Marine Subwoofers

Free Air REVO subs are recommended primarily for Infinite Baffle (Free Air) applications where a dedicated subwoofer enclosure is not available or practical.   Both 10” & 12” REVO FA subs are available in White or Black frames (Black frames use metallic grey cones). All REVO FA Subs are available in either single 2 Ohm or single 4 Ohm impedances.   All REVO 10” & 12” Subwoofers share the same design features:   • Nylas Composite Frame - to withstand extreme environmental use. Designed to accept optional RGB wiring.   • Injection Molded Composite Cone – For durability & low distortion.   • Santoprene Rubber Spider – Much more durable to water & temperature changes than a traditional treated Cotton Spider used by the majority of marine speakers & subwoofers.   • Santoprene Rubber Surround – Offers a superior bond to the composite cone.Also resists deterioration due to water, temperature & ultraviolet exposure.    • Stainless Steel Terminals – Designed to resist corrosion.   All REVO Subwoofers are sold without grills.8 different grill designs are available separately for all versions of 10” & 12” REVO HP & FA subwoofers.This will enable users to have matching grills on both REVO Coaxial In-Boat speakers & REVO Subwoofers.   Optional RGB LED Kits are available to fit under all REVO 10” & 12” subwoofer grills to enable users to have thousands of LED light display combinations. Diameter 11.02 inches w/grill (279.90 mm)   Mounting Depth 4.62 inches w/grill (117.47 mm)   Weight 8.1 lbs (3.67 kg)   Frequency Response 20Hz to 500HZ   RMS Watts 300   Box Specs Optimized for Infinite Baffle (Free Air) applications or 1.3 cu ft sealed enclosure   Impedance 4ohm   Sensitivity 88 db at 1watt/1 meter   PEAK Watts 600   Hole Cut Out 9.45 inches (240.03 mm)   Sub Size 10"   Series REVO   Cone Color Black   Application Type Free Air

Read more less

Free Air REVO subs are recommended primarily for Infinite Baffle (Free Air) applications where a dedicated subwoofer enclosure is not available or practical.   Free Air REVO subs are recommended primarily for Infinite Baffle (Free Air) applications where a dedicated subwoofer enclosure is not available or practical. The 8", 10”, & 12” REVO FA subs are available in White or Black frames (Black frames use metallic grey cones). REVO-8FA subwoofers are available in single 4 Ohm impedance. All REVO 8",10” & 12” Subwoofers share the same design features:  Powder Coated Cast Aluminum (REVO10/12) or Nylas Composite (REVO8) Frame - to withstand extreme environmental use. Designed to accept optional RGB wiring. Injection Molded Composite Cone – For durability & low distortion. Santoprene Rubber Spider – Much more durable to water & temperature changes than a traditional treated Cotton Spider used by the majority of marine speakers & subwoofers. Santoprene Rubber Surround – Offers a superior bond to the composite cone.Also resists deterioration due to water, temperature & ultraviolet exposure. Gold Plated Terminals – Designed to resist corrosion. All REVO Subwoofers are sold without grills.8 different grill designs are available separately for the 8" FA subwoofer.This will enable users to have matching grills on both REVO Coaxial In-Boat speakers & REVO Subwoofers.Optional RGB LED Kits are available to fit under all REVO 8",10” & 12” subwoofer grills to enable users to have thousands of LED light display combinations. RMS Watts 150   Impedance 4ohm   PEAK Watts 300   Frequency Response 20Hz to 500HZ   Mounting Depth 4.00 inches w/grill (102.00 mm)   Weight 13.00 lbs (5.89 kg)   Diameter 8.89 inches w/grill (225.80 mm)   Hole Cut Out 7.10 inches (180 mm)   Sensitivity 88 db at 1watt/1 meter   Box Specs Optimized for Infinite Baffle (Free Air) applications or 1.3 cu ft sealed enclosure   Sub Size 8"   Series REVO   Cone Color Black   Application Type Free Air

Read more less

12" 4Ω Marine Subwoofer   The KICKER® KM 12-inch Marine Subwoofer makes serious bass in a sealed or ported enclosure. Made to take the power and the weather, this sub is custom made to bump in your boat. SHOCK WAVES Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KM Series of subs. FEATURES Four-Ohm Voice Coil Injection-Molded Polypropylene Cone Co-molded Santoprene® Surround UniPlate™ Back Plate And Pole Piece Thick Tinsel Leads Large Ceramic Magnet Polymer Basket Resists Corrosion Protective Terminal Cap Stainless Mounting Hardware Included Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure (ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test) Want setup help? Go to KICKERU for a free woofer and amplifier configuration app! *The KM 12-inch Subwoofer works best with a sealed or ported enclosure and 175 watts of recommended power. See below for more details. Specifications Thiele/Small Parameters Woofer(in,mm) 12, 30 Impedance (OHMS) 4 SVC Peak Power (watts, per ANSI/CTA-2031-A) 350 Recommended Amplifier Power (watts RMS) 175 Sealed Enclosure Volume Min-Max(ft³, L) 1.25-3.5, 25.4-99.1 Vented Enclosure Volume Min-Max(ft³, L) 1.75-2.25, 49.6-63.7 Frequency Response(Hz) 30-500 Mounting Depth(in, cm) 5.5, 13.9 Hole Diameter(in, cm) 11, 27.9 Outer Diameter(in, cm) 13, 32.95 What's in the Box: 1 - 12" Woofer 1 - Back gasket 8 - Mounting screws 8 - Mounting screw clips 1 - Manual

Read more less

10" 4Ω Marine Subwoofer   The KICKER® KM 10-inch Marine Subwoofer makes serious bass in a sealed or ported enclosure. Made to take the power and the weather, this sub is custom made to bump in your boat. SHOCK WAVES Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KM Series of subs. FEATURES Four-Ohm Voice Coil Injection-Molded Polypropylene Cone Co-molded Santoprene® Surround UniPlate™ Back Plate And Pole Piece Thick Tinsel Leads Large Ceramic Magnet Polymer Basket Resists Corrosion Protective Terminal Cap Stainless Mounting Hardware Included Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure (ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test) Want setup help? Go to KICKERU for a free woofer and amplifier configuration app! *The KM 10-inch Subwoofer works best with a sealed or ported enclosure and 175 watts of recommended power. See below for more details. Specifications Woofer(in,mm) 10, 25 Impedance (OHMS) 4 SVC Peak Power (watts, per ANSI/CTA-2031-A) 350 Recommended Amplifier Power (watts RMS) 175 Sealed Enclosure Volume Min-Max(ft³, L) 1-2.4, 28.3-68 Vented Enclosure Volume Min-Max(ft³, L) 1.25-1.75, 35.4-49.6 Frequency Response(Hz) 30-500 Mounting Depth(in, cm) 5, 12.7 Hole Diameter(in, cm) 9-3/16, 23.2 Outer Diameter(in, cm) 10-11/16, 27.1 What's in the Box: 1 - 10" Woofer 1 - Back gasket 8 - Mounting screws 8 - Mounting screw clips 1 - Manual -->

Read more less

10" 2Ω Marine Subwoofer   The KICKER® KM 10-inch Marine Subwoofer makes serious bass in a sealed or ported enclosure. Made to take the power and the weather, this sub is custom made to bump in your boat. SHOCK WAVES Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KM Series of subs. FEATURES 2-Ohm Voice Coil Injection-Molded Polypropylene Cone Co-molded Santoprene® Surround UniPlate™ Back Plate And Pole Piece Thick Tinsel Leads Large Ceramic Magnet Polymer Basket Resists Corrosion Protective Terminal Cap Stainless Mounting Hardware Included Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure (ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test) Want setup help? Go to KICKERU for a free woofer and amplifier configuration app! *The KM 10-inch Subwoofer works best with a sealed or ported enclosure and 175 watts of recommended power. See below for more details. Specifications Woofer(in,mm) 10, 25 Impedance (OHMS) 2 SVC Peak Power (watts, per ANSI/CTA-2031-A) 350 Recommended Amplifier Power (watts RMS) 175 Sealed Enclosure Volume Min-Max(ft³, L) 1-2.4, 28.3-68 Vented Enclosure Volume Min-Max(ft³, L) 1.25-1.75, 35.4-49.6 Frequency Response(Hz) 30-500 Mounting Depth(in, cm) 5, 12.7 Hole Diameter(in, cm) 9-3/16, 23.2 Outer Diameter(in, cm) 10-11/16, 27.1 What's in the Box: 1 - 10" Woofer 1 - Back gasket 8 - Mounting screws 8 - Mounting screw clips 1 - Manual -->

Read more less

*Priced Per Speaker* (includes gray and white grille) MW-10WT 10″ 600w Waterproof Subwoofers MAX Power 600w RMS Power 300w Frequency Response 30-4kHz Product Description Marine Grade Waterproof 10” Subwoofers High Density ABS Construction w/ UV Coating 100% Waterproof Sealed Back Speaker Frame Stainless Steel Mounting Hardware Included IMPP Polypropylene Cone & Rubber Surround White and Titanium Grils Included Quick Disconnect Terminals Meets ROHS and CE Certifications 4-ohm System Impedance Showtime Electronics is an authorized Power Acoustik dealer.

Read more less

12" 2Ω Marine Subwoofer   The KICKER® KM 12-inch Marine Subwoofer makes serious bass in a sealed or ported enclosure. Made to take the power and the weather, this sub is custom made to bump in your boat. SHOCK WAVES Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KM Series of subs. FEATURES Two-Ohm Voice Coil Injection-Molded Polypropylene Cone Co-molded Santoprene® Surround UniPlate™ Back Plate And Pole Piece Thick Tinsel Leads Large Ceramic Magnet Polymer Basket Resists Corrosion Protective Terminal Cap Stainless Mounting Hardware Included Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure (ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test) Want setup help? Go to KICKERU for a free woofer and amplifier configuration app! *The KM 12-inch Subwoofer works best with a sealed or ported enclosure and 175 watts of recommended power. See below for more details. Specifications Thiele/Small Parameters Woofer(in,mm) 12, 30 Impedance (OHMS) 2 SVC Peak Power (watts, per ANSI/CTA-2031-A) 350 Recommended Amplifier Power (watts RMS) 175 Sealed Enclosure Volume Min-Max(ft³, L) 1.25-3.5, 25.4-99.1 Vented Enclosure Volume Min-Max(ft³, L) 1.75-2.25, 49.6-63.7 Frequency Response(Hz) 30-500 Mounting Depth(in, cm) 5.5, 13.9 Hole Diameter(in, cm) 11, 27.9 Outer Diameter(in, cm) 13, 32.95 What's in the Box: 1 - 12" Woofer 1 - Back gasket 8 - Mounting screws 8 - Mounting screw clips 1 - Manual -->

Read more less