15" Subwoofers
-
Sundown Audio Sundown Audio Nightshade NS-Series NS6 15" 3000W Subwoofer NS v.6
3500 Watt RMS / 7000 Watt Peak Dual 1 or 2 ohm voice coils Optional carbon cone/dustcap available Custom tooled basket Custom-tooled ultra-linear spider packs Extended shorting ring Eight-layer voice coil Custom tooled basket Cast aluminum cooling ring Ultra-linear spider pack Unique air exchanging system forces hot air out and cool air in Aluminum vent ring Ultra-linear Mega Roll V2 surround Features: The Nightshade 3,000-watt Neodymium sub is engineered to deliver incredibly powerful low end, with an extremely linear excursion and next-level thermal management. It features an eight-layer voice coil for excellent power handling and an extended shorting ring to minimize distortion and deliver a smooth, highly accurate sound at extreme SPL levels.
$1,049.99
-
Kicker Kicker 44CVX152 15" 1500W Dual-2-Ohm CompVX CVX Subwoofer/Sub CVX15
15" CompVX 2 Ohm The KICKER® CompVX™ features cutting-edge technology for truly musical, distortion-free bass. 15" CompVX 2 Ohm High-temp dual voice coils deliver the power, while a solid pole piece provides more mass to subdue additional heat. A T-cut top plate creates a wider magnetic field for stronger bass response, and better sound. It all comes together to form a super-reliable motor structure found only in a KICKER subwoofer. Features: Dual Two-Ohm Voice Coils Thick Polypropylene Cone Signature Double Blue Surround Stitching Ribbed Santoprene® Surround SoloKon™ Cone Reinforcement Oversized Suspension System High-Strength Insulated Tinsel Leads High Temp Voice Coil Perimeter Venting for Thermal Management Massive Ceramic Magnet UniPlate™ Extended Pole Piece & Backplate For Superior Heat Dissipation Cast Aluminum Basket Satin Nickel Spring-Loaded Speaker Terminals Want setup help? Go to KICKERU for a free woofer & amplifier configuration app! *The CompVX 15-Inch Subwoofer works best with a sealed or ported enclosure and 1000 watts of recommended power. See below for more details. Specifications Thiele/Small Parameters 44CVX152 T/S Parameters PDF Size (IN.,CM) 15, 38 Impedance (OHMS) 2 DVC Max Rec Amplifier Power (WATTS PEAK/RMS)* 2000/1000 Sensitivity (dB 1w/1m) 91.6 Frequency Response (Hz) 18-500 Mounting Depth (in, cm) 8-1/2, 21.5 Mounting Cutout (in, cm) 13-13/16, 35 Min Sealed Box Vol (cu. ft, L) 1.8, 51.0 Max Sealed Box Vol (cu. ft, L) 5.2, 147.0 Min Vented Box Vol (cu. ft, L) 3.0, 85.0 Max Vented Box Vol (cu. ft, L) 5.0, 142.0 What's in the box? one 15-inch subwoofer, one owner's manual, two stickers *Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details. **Port Volume Excluded. Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.
$399.95 $249.99
-
Sundown Audio X-Series XV4 15" 3000W RMS Subwoofer
The Sundown Audio XV4 15″ Subwoofer delivers the ultimate low-frequency experience for serious bass lovers. Built with the advanced X v.4 coil design, this subwoofer offers extreme power handling and consistent performance under heavy loads. With up to 3000W RMS and 6000W peak power, it ensures clean, distortion-free sound even at the highest volumes. The durable motor structure and optimized cone area (72.58 in²) provide deeper lows and better air displacement for maximum sound pressure. Engineered for flexibility, the XV4 15″ works best in ported enclosures (4.25 cu ft, tuned to 32 Hz) but can also be customized for complex box designs like 4th order setups. Every element — from the high-grade magnet to the precision voice coil — is crafted to deliver unmatched performance and reliability. Perfect for audiophiles and competitors seeking solid bass impact, this subwoofer combines engineering excellence and raw power in one package. Key Features 15″ high-performance subwoofer with X v.4 coils 3000W RMS / 6000W peak power handling 30mm Xmax for strong linear excursion Optimized motor design (9.25″ diameter) Recommended ported box: 4.25 cu ft @ 32 Hz Robust cone design for high SPL output Ideal for competitive and high-end car audio systems
$849.99
-
AUDIO ACE JOKER 15" V4 DUAL 2 OHM SUBWOOFER
Product Overview: The High-Performing Crowd-Pleaser Don’t let the name fool you! The Audio Ace Joker 15" V4 D2 is NO JOKE and is one of Audio Ace’s most popular subwoofers. This 15-inch driver is rated at a very conservative 1,000W RMS, designed to outperform expectations with its wide roll surround, high-temperature 3-inch 4-layer epoxy voice coil, and high-efficiency 168oz FEA Optimized Magnet Motor. The Dual 2 Ohm impedance provides flexible wiring for a 1 Ohm or 4 Ohm final load. The Joker is versatile, performing great in Sealed, Ported, and Bandpass enclosures. AUDIO ACE JOKER 15" V4 DUAL 2 OHM SPECIFICATIONS Size 15 Inch RMS Power Handling (Conservative) 1,000 Watts Nominal Impedance Dual 2 Ohm (D2) Voice Coil 3 Inch 4 Layer Epoxy High Temp Motor Weight 168 oz (FEA Optimized) Surround Wide Roll Surround Mounting Depth 7.75 Inches Cutout Diameter 13.819 Inches LOSS FACTORS & MISC PARAMETERS Total Q (Qts) 0.499 Mechanical Q (Qms) 4.821 Electrical Q (Qes) 0.557 Free Air Resonance (Fs) 26.8 Hz Sensitivity (Lm) 85.70 dB Equivalent Volume (Vas) 67.0709 L Moving Mass (Mms) 450.600 g BL Factor (Bl) 22.884
$279.00
-
DC Audio DC Audio Level 4 15" Dual-2-Ohm 1500W RMS / 3000W Peak Car Audio Subwoofer/Sub
The Level 4 m3 was designed to take even more power and get even louder than the m2. With fantastic power handling and smashing lows its hard to beat. The Level 4 sub is a large triple stacked motor with a chrome top plate and T yoke yielding 23.5mm of X-Max. Furthermore, you get the upgraded triple progressive spiders, cone, surround, 3" coil, cast basket, push terminals and upgraded lead wire sewn to the spider. This sub is rated at 1500w RMS and 3000w peak. Sub Size 10" 12" 15" 18" Mounting Depth 6.25" 6.75" 8" 9.5" Mounting Hole Diameter 9.25" 11" 14" 16.75" Outside Driver Diameter 11.0" 12.5" 15.7" 18.5" Motor Width 7.75" 7.75" 7.75" 7.75" Weight 32lbs 33lbs 33.5lbs 36lbs VC Diameter 3" 3" 3" 3" Displacement .16³ ft .18³ ft .21³ ft .26³ ft Magnet Weight 29lbs 29lbs 29lbs 29lbs Power Handling RMS/Peak 1500 / 3000 1500 / 3000 1500 / 3000 1500 / 3000 Impedance (Ohm) D1 or D2 D1 or D2 D1 or D2 D1 or D2 Sd 324cm² 481cm² 823cm² 1217cm² Vas 12.42 liters 27.38 liters 80.16 liters 175.29 liters Cms .085 mm/N .085 mm/N .085 mm/N .085 mm/N Mms 184.5 g 207.53 g 318.5 g 427.53 g Fs 40.2 Hz 37.9 Hz 30.6 Hz 26.4 Hz BL 19.18 NA 19.18 NA 19.18 NA 19.18 NA Re 3.82 Ohm 3.82 Ohm 3.82 Ohm 3.82 Ohm Le 3.78 mH 3.78 mH 3.78 mH 3.78 mH Qms 7.77 8.24 10.2 11.82 Qes .49 .52 .644 .746 Qts .461 .489 .60 .701 Xmax 23.5 mm 23.5 mm 23.5 mm 23.5 mm Ref SPL @ 1 watt 84 dB 86.4 dB 87.4 dB 88.2 dB Suggested Sealed .75³ ft 1³ ft 2.75³ ft 4³ ft Suggested Ported 1.0³ ft 1.5³ ft 3.0³ ft 5.5³ ft Key Features • Extremely rigid non-pressed paper cone assembly • Multilayered polymer foam surround • Polypropylene dust cover with DC logo • Triple 8” OD semi cup progressive roll spider • Extra heavy duty interweaved tinsel lead wire sewn to spider • Cast aluminum black frame • FEA analyzed and optimized motor assembly – Fully CNC machined • Rubber mounting gasket • Chrome spring loaded push terminals • 3” Hi-temp Aluminum voice coil wound on black anodized voice coil former
$409.99
-
Deaf Bonce Deaf Bonce Apocalypse DB-3015R D1/D2 15" 2800W Subwoofer
Specifications Model DB-3015R D1 / DB-3015R D2 Type Subwoofer Size 15 inch Voice coil size 3.00 inch Cone Paper Magnet Ferrite Voice coil wire None Surround Foam RMS Power 2800 W MAX Power 5600 W Frame Alu Impedance 1+1 / 2+2 Ohm SPL 88.00 / 88.30 dB Fs 32.00 / 32.50 Hz Qts 0.45 / 0.47 BL 23.00 / 26.10 Vas 68.00 / 69.70 L Xmeh 38.00 / 38.00 mm Xmax 19.00 / 19.00 mm Mounting depth 10.18 inch (258.5 mm) Cut-out dimension 13.98 inch (355.0 mm) Gross weight 68.34 lb (31.00 kg)
$649.90
-
Sundown Audio Z-Series ZV6 15" 3250W Subwoofer Z v.6
The Z v.6 is the second step up in Sundown's "ultra-high excursion" subwoofer lineup after the X v.3 series and replaces the world-famous Z v.5 series. All models (10,12,15,18) feature our custom tooled and patented frames (US Patent Numbers D691596, D691597, D691598, and D741841). Sundown mates these new platform frames to a quad stacked 240mm (9.45”) diameter motor structure with a total magnet stack height of 100mm (3.94”) featuring a hyper-extended pole and extreme clearances (allowing over 4" p-p travel before mechanical bottom effectively making it bottomless). Compared to the X v.3 motor both the top & back plates are thicker allowing for even more magnetic strength and excursion potential. For the Z v.6 the top plate is another 5mm thicker than even the outgoing Z v.5 series! This motor drives a 3" diameter 8-Layer Flat Wire Aluminum Voice Coil wound on a thick aluminum former to incredible levels of excursion. The Z v.6 now uses the same voice coil as the NS v.5 series. The Z v.5 utilized a 4-layer voice coil – the change to an 8-layer was to answer our customers desire for higher motor force (more output) and it does just that! Based on Sundown's years of experience with the Z v.4 and Z v.5 series we've also improved the voice coil ventilation to be even more effective. The Z v.6 features a high-velocity pole vent, a heavily vented magnetic gap, and (all new for the v.6) machined channels in four places around the pole piece itself. The Z v.6 series was designed from the ground-up to become the new standard in the low-frequency / small ported box subwoofer category in this price range. They will work in the same small enclosures that are commonly used for for Sundown Audio's subwoofers, although, they can be used with enclosures up to about 50% larger than those if you desire even more low-end extension. The Z v.6 series is really a different kind of woofer due to its incredibly linear suspension. They are designed for the LOWEST level of bass extension possible in a small enclosure while maintaining extremely low levels of distortion. Features Power Handling:3250 Watts RMS / 6500 Watts Peak Xmax = 35mm one-way by 70% BL Heavily vented magnetic gap Spring Loaded Terminals Optimized high-velocity pole vent Innovative high-velocity cast-aluminum vented frame spacer ring Black aluminum 3 inch 8-layer voice coil Mega-Roll v.2 surround Custom tooled basket Large aluminum Faraday (shorting) Ring Stitched-On XL Tinsel Leads to prevent fatigue and failure Custom-tooled ultra-linear spider packs Enclosure Designs .Zip File
$1,049.99
-
Sundown Audio SA-Series v.3 15" Subwoofer
1500 Watts / 3000 Watts Peak Dual 2 or 4 ohm voice coils Enclosure Specifications Sealed Enclosure 2.0 cu ft Ported Enclosure 3.0 cu ft Recommended Tuning 35Hz Recommended Port Area 44 sq in Displacement Depth 8.65" Outside Diameter 15.59″ Cut-Out 14.01″ Physical Dimensions Download Enclosure Designs .Zip File
$449.99
-
Sundown Audio M-Series M18 2000W Subwoofer
2000 Watts RMS / 4000 Watts Peak Available in Dual 1 and Dual 2 Ohm Configurations Mega Roll Surround and Frame Etched All Black Backplate Quad Stack Magnet Structure The Sundown M-Series is an all-new "entry-level" subwoofer in our Mega series - all Mega series subwoofers (10,12,15,18) feature our custom tooled and patented frames (US Patent Numbers D691596, D691597, D691598, and D741841) and our Mega-Roll surround.When we say "entry-level" this is only by comparison to its big brothers in our own Mega line - X,Z,NS series and higher. The M series was built for intense bass with stellar low-frequency performance at industry-leading levels of low-distortion. It does this while looking amazing - with a new laser-etched back-plate design and special M-series magnet boot design. For the M-series we mate out Mega series frames to a quad stacked 200mm (7.87”) diameter motor structure with a total magnet stack height of 88mm (3.46”) featuring a hyper-extended pole and extreme clearances (allowing 59.5mm to mechanical bottom effectively making it bottomless - this is 4.68" peak-to-peak). At Sundown we always do things to the extreme so even our "entry" level M-series features a full 20mm thick top-plate to finish the efficient magnetic circuit. We did all of this while still optimizing the cost to offer the absolute best-value to our customers. This motor drives a 3" diameter 4-Layer Round Wire Aluminum Voice Coil wound on a thick aluminum former to incredible levels of excursion. The new coil in the M-series was developed for both the M and X v.4 series and features a very special winding (invented by Sundown for the X-8 series originally) that allows the best winding packing density in the gap for both the D1 and D2 options. This coil is so massive that it allows even our M-series to achieve a full 35mm one-way linear excursion. We are truly setting a new industry standard with the M-series. Based on Sundown's years of experience we've included our highly efficient high-stroke coil ventilation system developed for the X and Z series originally. The M-series features a high-velocity pole vent, a heavily vented magnetic gap through the back-plate, and our proprietary high-velocity cast-aluminum frame-base venting system. The M-series was designed from the ground-up to become the new standard in the low-frequency / small, ported box subwoofer category in this price range. Never before have we been able to offer such an incredible value in the Mega series. They will work in the same enclosure as our other Mega platform subwoofers, but the M-series also opens up the possibility for sealed and IB applications. This is something that was not well suited to any other previous Mega platform subwoofer. The M-series is really a different kind of woofer due to its incredibly linear suspension. They are designed for the LOWEST level of bass extension possible in a small enclosure while maintaining extremely low levels of distortion. This is all thanks to the Sundown Mega-Roll surround & proprietary Sundown PG linear suspension (fully computer optimized). As with most subwoofers from Sundown the M-series features a magnet inner-diameter aluminum shorting ring for superior inductive distortion performance as well.We are quite certain that the M-series will go down in car audio history as one of the best low-distortion subwoofers per-dollar of its time.
$699.99
-
Sparked Innovations Sparked Innovations 15" Bass Blaster Car Audio Subwoofer 2000W DVC
The Bass Blaster subwoofer series is a truly unique blend of car audio nostalgia and modern technology. Designed and built as a product of love for car audio, this subwoofer will look as good in your install as it will sound. As lifelong enthusiasts ourselves, we knew the demands this subwoofer would need to meet. The engineering expertise of Jacob Fuller, founder of Sundown Audio, has led to a subwoofer that can take the abuse of high-powered systems that the modern-day enthusiast likes to throw at everything. Advanced cooling techniques, high-excursion linear suspension, and classically inspired aesthetics mean The Bass Blaster will give you the best-sounding bass, for a long time, as you turn the heads of anyone that takes a look. Design Our philosophy with The Bass Blaster was to recreate the feel of car audio from our youth. The blue surround is not just our branding color, it is an homage to woofers of the 1990s that used brightly colored surrounds as a signature look. The balance of the blue to the grey/silver basket and cone harkens back to the early 2000s when some of our favorite woofer models sported a distinct style. The aluminum dust cap is used to give depth and texture to the woofer as a whole and add rigid reinforcement to the cone body. The genesis of the design was the motor itself, the large vent for the four-inch coil was something that caught our eye in car audio shops in the 1990s. Jacob Fuller captured that look while tapering the vent and adding a pole cap to not compromise modern cooling techniques for the best performance-to-aesthetics ratio possible. Topped off with the metal mesh over the magnet slugs, The Bass Blaster is the 90s/2000s woofer we all wish we had in our teens, but even better that we have it in our 40s. General Specifications Power handling 2000W RMS Dual voice coil D2 or D4 Xmax (mm one way) 25 Xmech (mm one way) 50 Heat-treated 4-layer 4-inch coil Quad braided tinsel leads Multi-layer foam surround in Sparked Blue Aluminum dust cap Cast aluminum frame High-velocity motor cooling Measurements Parameter Metric (mm) Imperial (in) Outer Diameter 389.90 15.35 Mounting Diameter 355.60 14.00 Overall Depth 273.84 10.78 Mounting Depth 243.84 9.60 T/S Parameters Parameter D2 D4 RE (Ohms) 3.88 5.97 Fs (Hz) 28.52 29.72 VAS (L) 33.36 32.02 Qes 0.61 0.69 Qms 6.50 6.97 Qts 0.56 0.63 BL 30.74 35.98 Mms (Grams) 830.92 797.52 Cms (uM/N) 37.50 35.95 Sensitivity (dB @2.83Vrms/1m) 85.91 @ 1 kHz 83.90 @ 1 kHz ENCLOSURE RECOMMENDATIONS Size Enclosure Type Volume (ft³) Port Tuning (Hz) Details Type Dia. (in) Length (in) 15" QB3 - Flat Response 2.75-3.50 Round 4 23" @ 2.75ft³17" @ 3.50ft³ 22 Details 15" QB3 - Low-Frequency Peak 3.25-5.00 Round 4 14" @ 3.25ft³8" @ 5.00ft³ 25 Details 15" SBB4 - Flat Response 1.50-2.00 Round 4 19" @ 1.50ft³14" @ 2.00ft³ 32 Details 15" SBB4 - Loud Bass Response 2.50-6.50 Round 6 25" @ 2.50ft³7" @ 6.50ft³ 32 Details ×
$469.99
-
Clearance Deals McLaren Audio M8-15D4 15" 800 Watt Dual 4 Ohm Car Audio Subwoofer/Sub M815D4
McLaren Sound M8-15D2 15″ Car Audio Subwoofer Hear the Difference, Feel the Difference 800W/1600W Dual 4 Ohm Subwoofer 15" Subwoofer Authorized Dealer Description D2 D4 FS (Hz) 26.97 29.27 Re (ohm) 4 7 Sensitivity (dB) 87.49 87.13 Vas (L) 108.62 93.44 Qes 0.61 0.73 Qms 3.24 2.86 Qts 0.51 0.58 MMs (grams) 308.1 303.99 Cms (mm/N) 0.113 0.097 Bl 18.58 23.27 Sd (cm2) 830 830 Cutout Diameter (in) 14.75 14.75 Mounting Depth (in) 7.875 7.875
$299.95 $199.99
-
Kicker Kicker 44L7S152 15" 2000W Dual-2-Ohm Car Audio Subwoofer/Sub Solobaric L7S
15" Solo-Baric L7 2 Ohm The KICKER® Solo-Baric® L7S™ boasts massive power handling and more cone area than any circular sub. You move more air, so you get more bass. Square Matters The heavy-duty motor structure includes a large-diameter spider for less flex, longer life and superior accuracy. High-temp voice coil wire winding completes a powerful Comp motor that makes the most of every watt you give it. Features: Dual Two-Ohm Voice Coils Injection-Molded Polypropylene Cone Patented Corner Ribs Minimize Distortion SoloKon™ 360-Degree Back Bracing Ribbed Santoprene Surround With Blue Surround Stitching UniPlate™ Back Plate And Pole Piece, Plus Perimeter Venting For Excellent Thermal Management Thick Tinsel Leads Large Ceramic Magnet Cast Aluminum Basket Satin-Nickel Plated, Spring-Loaded Speaker Terminals Fresh Water Bump The materials used in the L7S series makes them a perfect choice for adding some bass to your boat.* *Extreme durability in fresh-water applications only (not recommended for salt water) Specifications Thiele/Small Parameters 44L7S152 T/S Parameters PDF Size (IN.,CM) 15, 38.1 Impedance (OHMS) 2 DVC Max Rec Amplifier Power (WATTS PEAK/RMS)* 2000/1000 Sensitivity (dB 1w/1m) 89.4 Frequency Response (Hz) 18-100 Mounting Depth (IN.,CM) 8-11/16, 22.1 Mounting Cutout, Square (IN.,CM) 13-3/4, 34.9 Min Rec Sealed Box Volume (CU. FT., Liters) 2.0, 56.64 Max Rec Sealed Box Volume (CU. FT., Liters) 6.0, 169.9 Min Rec Vented Box Volume (CU. Ft., Liters)** 3.0, 85.0 Max Rec Vented Box Volume (CU. Ft., Liters)** 6.0, 169.9 What's in the box? one 15-inch subwoofer, one owner's manual, two stickers *Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details. **Port Volume Excluded. Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.
$509.99 $479.99
-
DC Audio DC Audio Level 3 15" Dual-2-Ohm 1000W RMS / 2000W Peak Car Audio Subwoofer/Sub
The level 3 sub is the ultimate daily driver sub. It puts out the low lows with lots of output designed for sealed or ported enclosures. The Level 3 sub is a triple stacked FEA optimized motor wrapped in a magnet boot, chrome top plate and T yoke. The deep gap offers more X-max for a total of 22.5mm. This sub also comes with dual upgraded progressive spiders, cone, surround, 3" voice coil, cast basket, push terminals, and upgraded sewn down lead wire. We give the Level 3 a power rating of 1000w RMS/2000w peak. Sub Size 10" 12" 15" 18" Mounting Depth 6.25" 6.75" 8" 9.5" Mounting Hole Diameter 9.35" 11" 14" 16.75" Outside Driver Diameter 11" 12.5" 15.7" 18.5" Motor Width 7" 7" 7" 7" Weight 20lbs 20.5lbs 21.5lbs 22lbs VC Diameter 3" 3" 3" 3" Displacement .15³ ft .16³ ft .18³ ft .22³ ft Magnet Weight 18lbs 18lbs 18lbs 18lbs Power Handling RMS/Peak 1000 / 2000 1000 / 2000 1000 / 2000 1000 / 2000 Impedance (Ohm) D1/D2/D4 D1/D2/D4 D1/D2/D4 D1/D2/D4 Sd 324cm² 481cm² 823cm² 1217cm² Vas 13.16 liters 28.99 liters 84.88 liters 185.6 liters Cms 0.09 mm/N 0.09 mm/N 0.09 mm/N 0.09 mm/N Mms 190 g 225 g 295 g 305 g Fs 38.5 35.4 30.9 30.4 BL 17.2 N/A 17.2 N/A 17.2 N/A 17.2 N/A Re 3.6 Ohm 3.6 Ohm 3.6 Ohm 3.6 Ohm Le 3.5 mH 3.5 mH 3.5 mH 3.5 mH Qms 7.66 8.33 8.18 8.32 Qes 0.567 0.617 0.706 0.718 Qts 0.528 0.574 0.65 0.661 Xmax 23 mm 23 mm 23 mm 23 mm Ref SPL @ 1 watt 83.1 dB (86.6@2.83V) 85 dB (88.5@2.83V) 87.3 dB (90.8@2.83V) 90.4 dB (93.9@2.83V) Suggested Sealed .65³ ft 1³ ft 2³ ft 4³ ft Suggested Ported 1.0³ ft 1.25³ ft 3.0³ ft 5.5³ ft Key Features • Extremely rigid non-pressed paper cone assembly • Multilayered polymer foam surround • Polypropylene dust cover with DC logo • Dual 8” OD semi cup progressive roll spider • Extra heavy duty interweaved tinsel lead wire sewn to spider • Cast aluminum black frame • FEA analyzed and optimized motor assembly – Fully CNC machined • Rubber mounting gasket • Chrome spring loaded push terminals • Dual 4 ohm 3” Hi-temp Aluminum voice coil wound on black anodized voice coil former
$329.99
-
Sundown Audio Sundown Audio U-Series v.1 15" Subwoofer
The Sundown U Series is our premier “standard suspension” woofer series. It is the most direct replacement for the world famous Z v.3 woofer line which we produced from 2011 to 2016 before launching the “new platform” Z v.4 series. Due to numerous advancements in our design process the U Series is able to deliver performance on-par with the Z v.3 series but at a much lower cost. We start with a double-stacked / 8.66” wide Y35 grade ferrite magnet system coupled to a one-piece, bumped T-Yoke and a 0.6” thick top-plate. Just as with the Z v.3 before it and our other high-end subwoofers we also add a very thick (5mm thickness) aluminum shorting ring inside the magnets to reduce static inductance and level out inductance over stroke. The U series motor also features a 0.6” long pole-extension to keep the coil under control at high levels of excursion. The voice coil is a 2.36” long / 3” diameter 4-layer aluminum winding / aluminum former unit – which is the same coil we use in our X v.2 series and, thus, the U series has the same 1500-watt RMS ratings. The coil temperature is kept in check by a heavily smoothed / high-velocity pole-vent and a series of ten direct air-gap vents in the back plate. The U series also features newly tooled cast aluminum vent rings in between the frame and top plate to effectively exchange air at a high velocity over the voice coil beneath the spider landing. The U series features an all-new cast aluminum frame series to the Sundown line which allows for taller cones than the older frames used on the Z v.3 series. The taller cones provide enhanced coil stability and increased mechanical excursion capability. We also tooled matching cast-aluminum surround clamps for the U series to ensure durability in the most demanding situations. The surrounds and cone bodies have been fully custom tooled especially for the U series and are stronger / support more excursion than the Z v.3 series cones and surrounds. The new cone bodies also feature an indentation for the same wide-flange, ultra-strong dust caps as our new platform subwoofers. If you are looking for a woofer that sounds similar to the SA series but handles significantly more power… the U series is exactly what you need. It has been designed to live up to the reputation earned by our Z v.3 series both in terms of every-day music enjoyment and SPL competition. Specifications Black Aluminum 3” voice coil former for superior heat dissipation High Temperature Round-Wire CCAW voice coil with high-temp black adhesive Double stitched surround Heavy duty cast basket Spring loaded terminals accept up to 8 gauge Stitched-on double-XL tinsel leads Rear vented pole piece Rear drilled gap-venting Innovative high-velocity cast aluminum vented frame spacer ring Magnet ID shorting ring Top-Plate Cooling Channels Cast Aluminum surround bolt-on rings Optimized for small ported or bandpass enclosures Specifications T/S SPECS U 15" D2 U 15" D4 RE (Ohms) 3.8 6.1 FS (Hz) 37.9 34.9 VAS (L) 54.0 63.9 Qes 0.34 0.39 Qms 3.10 3.48 Qts 0.31 0.35 Le (mH) 2.44 3.80 BL (NA) 30.7 34.6 Mms (Grams) 355.7 353.0 Cms (uM/N) 0.05 0.06 Sens (dB @ 1w/1m) 91.2db 90.2db
$369.99
-
AUDIO ACE JESTER 15" DUAL 2 OHM SUBWOOFER
Product Overview: Audio Ace’s Powerful and Versatile 15-Inch Driver The Audio Ace Jester 15" D2 is designed to achieve a high level of both Sound Quality (SQ) and Sound Pressure Level (SPL), rated at a formidable 3, 000W RMS. Its design includes a fairly low Free Air Resonance (Fs) and a powerful 300 oz motor structure, making it highly versatile for great sound across a wide range of music. Whether you're aiming for extreme sound levels or just wanting to enjoy powerful bass in your daily driver, the Jester is an excellent choice. It features a heavy-duty die-cast aluminum basket, a 3-inch BACCAW 4-layer voice coil, and a 4-layer 10-inch spider suspension. The Dual 2 Ohm impedance provides a flexible path to a 1 Ohm or 4 Ohm final load. AUDIO ACE JESTER 15" DUAL 2 OHM SPECIFICATIONS Model Jester 15" RMS Power Handling 3,000 Watts Voice Coil 3" BACCAW 4 Layer Coil Magnet Structure 300 oz Suspension 4 Layer 10" Spider Basket Heavy Duty Die Cast Aluminum Nominal Impedance Dual 2 Ohm (D2) Cutout Diameter 14.331 in Mounting Depth 10.07 in LOSS FACTORS & MISC PARAMETERS Total Q (Qts) 0.464 Mechanical Q (Qms) 5.368 Electrical Q (Qes) 0.508 Free Air Resonance (Fs) 33.7 Hz Sensitivity (Lm) 86.10 dB Equivalent Volume (Vas) 33.8589 L Moving Mass (Mms) 551.552 g BL Factor (Bl) 28.449 DC Resistance (Re) 3.52 Ohms Effective Piston Area (Sd) 769.45
$579.00
-
RESILIENT SOUNDS PLATINUM V2 15" DUAL 2 OHM (D2) SUBWOOFER
Monumental Power and Excursion in a 15-Inch Chassis The Resilient Sounds PLATINUM V2 15" D2 is engineered to deliver competition-level output and fidelity, serving as a true powerhouse for any advanced audio system. Conservatively rated at a massive 2,500W RMS (5,000 Watts Peak), this 15-inch subwoofer boasts a 13% larger motor assembly and a 20% longer 3-inch 8-layer voice coil, which dramatically increases thermal handling and motor force (BL²/Re is up to 50% higher than the V1). The Dual 2 Ohm configuration provides flexible wiring options for 1 Ohm or 4 Ohm final loads. Featuring a huge 35mm XMAX, a 10-inch spider pack, and a stiff carbon fiber cone, the Platinum V2 15" is ready to produce deep, high-impact bass that will satisfy the most demanding audiophiles. TECHNICAL SPECIFICATIONS Specification Detail Model Platinum 15 V2 Nominal Impedance Dual 2 Ohm (D2) RMS Power Handling (Conservative) 2,500 Watts Peak Power Handling 5,000 Watts Maximum Excursion (XMAX) 35MM Voice Coil 3-inch 8 Layer (20% Longer than V1) Motor Structure 13% Larger Motor, XL Triple Stacked Cone / Dust Cap Carbon Fiber Surround New High Roll Tooled Surround Spider / Leads 10" Spider Pack with Insulated Dual Leads Frame/Basket Cast Aluminum Frame RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 2.5 - 3.5 CU FT Tuning Frequency 28 - 33 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 11.25 INCHES Cutout Diameter 14.2363 INCHES Displacement 0.28 CUBIC FT
$699.99
-
Sundown Audio Sundown Audio SA-Classic 15" Subwoofer
1000 Watt RMS/ 2000 Watt Peak Dual 2 or 4 ohm voice coils Optimized for small ported, sealed, & band-pass enclosures Large aluminum Faraday ring for smooth acoustic response High strength cast aluminum frame Low distortion motor construction High-temperature voice coil wire Spring-loaded terminals Stitched-on “XL” tinsel lead wires The SA Classic sub is a stunning combination of value, power handling, and deep excursion. It features a cast aluminum frame that houses a bulletproof custom 2.5-inch voice coil, robust double-layered Nomex spider, and SPL competition-grade paper cone. These components are built into a flexible design that works well in any type of enclosure.
$339.99
-
Sundown Audio Sundown Audio E-Series v.4 15" Subwoofer
750 Watts RMS / 1500 Watts Peak Dual 2 or 4 ohm voice coils Optimized for ported enclosures Class-leading 14mm Xmax Double-stacked magnet Vented magnetic gap & pole piece for superior cooling High strength stamped steel frame High temp 4-layer copper voice coil wire High-quality push terminals Stitched-on Mini-XL tinsel leads Typical entry-level woofers are highly limited in terms of linear excursion, mechanical ruggedness, and thermal performance. Through relentless research in their North Carolina Headquarters, Sundown optimized a 2.5” voice coil and a truly unique motor design to get the deepest possible bass response out of a 15” subwoofer. The subwoofer showcases a distinctive motor design, featuring a heavily vented magnetic gap and solid pole piece, enabling exceptional thermal power handling. The spider itself is a high strength poly-cotton blend designed to handle the full capacity of the motor. To provide an additional level of ruggedness the spider is bolted down and glued to the frame. Its motor geometry allows for a remarkable 14mm one-way linear Xmax, delivering excursion equivalent to far larger cones.
$259.99
-
Kicker Kicker 44CWCD154 15" Dual 4-Ohm Subwoofer
15" CompC 4 Ohm DVC CompC Subwoofers are equipped with a stamped steel frame and world-class durability for hard-hitting, high-performance bass. Features: Dual Four-Ohm Voice Coil Injection-Molded Polypropylene Cone Perimeter Venting for Thermal Management Ribbed Polyurethane Surround Signature Yellow Surround Stitching High-Strength Spiralead™ Tinsel Leads Stamped Steel Basket High Temp Voice Coil Spring-Loaded Speaker Terminals
$179.99 $144.99
-
Kicker Kicker 48CWR154 CompR 15" 1600 Watt Dual 4-Ohm Subwoofer
15" CompR 4 Ohm The CompR 15-Inch Subwoofer is a 2Ω dual voice coil design, making it easy to get the most out of your amp. An advanced suspension and heat management system helps to keep the bass powerful, deep and consistent. Our signature red double stitching makes an outstanding bond between the improved Santoprene® surround and polypropylene woofer cone. Revolutionary SoloKon™ technology joins the cone to the vented back brace, creating a single integrated unit that both cools the motor and eliminates distortion. To make our subs even more reliable, KICKER engineers developed Forced Air Cooling to help our subs run 25% cooler than before. The CompR 15-Inch Subwoofer works best with a sealed or ported enclosure and 800 watts of recommended power. See below for more details. Specifications Thiele/Small Parameters 48CWR154 T/S Parameters SIZE [in, cm]: 15, 38 IMPEDANCE [Ohms]: 4 DVC Recommended Amplifier Power (watts RMS) 800 Peak Power (watts, per ANSI/CTA-2031-A) 1600 SENSITIVITY [dB 1w/1m]: 89.4 MOUNTING DEPTH [in, cm]: 7-15/16, 20 MOUNTING DIAMETER [in, cm]: 13-3/4, 35 MIN SEALED BOX VOL [cu. ft, L]: 1.8, 51 MAX SEALED BOX VOL [cu. ft, L]: 3.0, 85 MIN VENTED BOX VOL [cu. ft, L]: 3.0, 85 MAX VENTED BOX VOL [cu. ft, L]: 5.0, 142
$349.99 $319.99
-
DC Audio DC Audio Level 4 15" Dual-1-Ohm 1500W RMS / 3000W Peak Car Audio Subwoofer/Sub
The Level 4 m3 was designed to take even more power and get even louder than the m2. With fantastic power handling and smashing lows its hard to beat. The Level 4 sub is a large triple stacked motor with a chrome top plate and T yoke yielding 23.5mm of X-Max. Furthermore, you get the upgraded triple progressive spiders, cone, surround, 3" coil, cast basket, push terminals and upgraded lead wire sewn to the spider. This sub is rated at 1500w RMS and 3000w peak. Sub Size 10" 12" 15" 18" Mounting Depth 6.25" 6.75" 8" 9.5" Mounting Hole Diameter 9.25" 11" 14" 16.75" Outside Driver Diameter 11.0" 12.5" 15.7" 18.5" Motor Width 7.75" 7.75" 7.75" 7.75" Weight 32lbs 33lbs 33.5lbs 36lbs VC Diameter 3" 3" 3" 3" Displacement .16³ ft .18³ ft .21³ ft .26³ ft Magnet Weight 29lbs 29lbs 29lbs 29lbs Power Handling RMS/Peak 1500 / 3000 1500 / 3000 1500 / 3000 1500 / 3000 Impedance (Ohm) D1 or D2 D1 or D2 D1 or D2 D1 or D2 Sd 324cm² 481cm² 823cm² 1217cm² Vas 12.42 liters 27.38 liters 80.16 liters 175.29 liters Cms .085 mm/N .085 mm/N .085 mm/N .085 mm/N Mms 184.5 g 207.53 g 318.5 g 427.53 g Fs 40.2 Hz 37.9 Hz 30.6 Hz 26.4 Hz BL 19.18 NA 19.18 NA 19.18 NA 19.18 NA Re 3.82 Ohm 3.82 Ohm 3.82 Ohm 3.82 Ohm Le 3.78 mH 3.78 mH 3.78 mH 3.78 mH Qms 7.77 8.24 10.2 11.82 Qes .49 .52 .644 .746 Qts .461 .489 .60 .701 Xmax 23.5 mm 23.5 mm 23.5 mm 23.5 mm Ref SPL @ 1 watt 84 dB 86.4 dB 87.4 dB 88.2 dB Suggested Sealed .75³ ft 1³ ft 2.75³ ft 4³ ft Suggested Ported 1.0³ ft 1.5³ ft 3.0³ ft 5.5³ ft Key Features • Extremely rigid non-pressed paper cone assembly • Multilayered polymer foam surround • Polypropylene dust cover with DC logo • Triple 8” OD semi cup progressive roll spider • Extra heavy duty interweaved tinsel lead wire sewn to spider • Cast aluminum black frame • FEA analyzed and optimized motor assembly – Fully CNC machined • Rubber mounting gasket • Chrome spring loaded push terminals • 3” Hi-temp Aluminum voice coil wound on black anodized voice coil former
$409.99
-
DC Audio DC Audio Level 3 15" Dual-4-Ohm 1000W RMS / 2000W Peak Car Audio Subwoofer/Sub
The level 3 sub is the ultimate daily driver sub. It puts out the low lows with lots of output designed for sealed or ported enclosures. The Level 3 sub is a triple stacked FEA optimized motor wrapped in a magnet boot, chrome top plate and T yoke. The deep gap offers more X-max for a total of 22.5mm. This sub also comes with dual upgraded progressive spiders, cone, surround, 3" voice coil, cast basket, push terminals, and upgraded sewn down lead wire. We give the Level 3 a power rating of 1000w RMS/2000w peak. Sub Size 10" 12" 15" 18" Mounting Depth 6.25" 6.75" 8" 9.5" Mounting Hole Diameter 9.35" 11" 14" 16.75" Outside Driver Diameter 11" 12.5" 15.7" 18.5" Motor Width 7" 7" 7" 7" Weight 20lbs 20.5lbs 21.5lbs 22lbs VC Diameter 3" 3" 3" 3" Displacement .15³ ft .16³ ft .18³ ft .22³ ft Magnet Weight 18lbs 18lbs 18lbs 18lbs Power Handling RMS/Peak 1000 / 2000 1000 / 2000 1000 / 2000 1000 / 2000 Impedance (Ohm) D1/D2/D4 D1/D2/D4 D1/D2/D4 D1/D2/D4 Sd 324cm² 481cm² 823cm² 1217cm² Vas 13.16 liters 28.99 liters 84.88 liters 185.6 liters Cms 0.09 mm/N 0.09 mm/N 0.09 mm/N 0.09 mm/N Mms 190 g 225 g 295 g 305 g Fs 38.5 35.4 30.9 30.4 BL 17.2 N/A 17.2 N/A 17.2 N/A 17.2 N/A Re 3.6 Ohm 3.6 Ohm 3.6 Ohm 3.6 Ohm Le 3.5 mH 3.5 mH 3.5 mH 3.5 mH Qms 7.66 8.33 8.18 8.32 Qes 0.567 0.617 0.706 0.718 Qts 0.528 0.574 0.65 0.661 Xmax 23 mm 23 mm 23 mm 23 mm Ref SPL @ 1 watt 83.1 dB (86.6@2.83V) 85 dB (88.5@2.83V) 87.3 dB (90.8@2.83V) 90.4 dB (93.9@2.83V) Suggested Sealed .65³ ft 1³ ft 2³ ft 4³ ft Suggested Ported 1.0³ ft 1.25³ ft 3.0³ ft 5.5³ ft Key Features • Extremely rigid non-pressed paper cone assembly • Multilayered polymer foam surround • Polypropylene dust cover with DC logo • Dual 8” OD semi cup progressive roll spider • Extra heavy duty interweaved tinsel lead wire sewn to spider • Cast aluminum black frame • FEA analyzed and optimized motor assembly – Fully CNC machined • Rubber mounting gasket • Chrome spring loaded push terminals • Dual 4 ohm 3” Hi-temp Aluminum voice coil wound on black anodized voice coil former
$329.99
-
Kicker Kicker 45L7R154 1800W 15" Dual-4-Ohm Car Audio Subwoofer/Sub L7R L7
The L7R Square Sub moves more air, so you get more bass. The design was invented right here in Stillwater, Oklahoma – made to deliver unprecedented efficiency and huge volume! Bigger Bump Originator, n. (əˈrijəˌnādər): see KICKER The engineers at KICKER invented the original square sub to give you more bass - yet take up no more air space than a standard round sub. Welcome to the miraculous world of the L7R! Dual Four-Ohm Voice Coil Wrap Around Gasketing Patented Ribbed Corners Injection-Molded SoloKon™ Woofer SoloKon™ 360-Degree Back Bracing UniPlate™ Back Plate And Pole Piece Bumped Back Plate Thick Tinsel Leads Large Ceramic Magnet Steel Basket With Spoke Design Nickel Plated Speaker Terminals Specifications SIZE [in, cm]:15, 38 IMPEDANCE [Ohms]:4 DVC POWER WATTS [peak/RMS]:1800/900 SENSITIVITY [dB 1w/1m]:88.05 MOUNTING DEPTH [in, cm]:8 -3/8, 21.5 MOUNTING DIAMETER [in, cm]:13-3/4, 34.9 MIN SEALED BOX VOL [cu. ft, L]:1.5, 42.48 MAX SEALED BOX VOL [cu. ft, L]:3, 85 MIN VENTED BOX VOL [cu. ft, L]:3, 85 MAX VENTED BOX VOL [cu. ft, L]:6, 170 What's in the Box:1 - 15" Subwoofer, 1 - install manual, 2 - Kicker stickers
$379.99 $369.99
-
Sundown Audio Sundown Audio U-Series v.1 15" Subwoofer *Refurbished*
The Sundown U Series is our premier “standard suspension” woofer series. It is the most direct replacement for the world famous Z v.3 woofer line which we produced from 2011 to 2016 before launching the “new platform” Z v.4 series. Due to numerous advancements in our design process the U Series is able to deliver performance on-par with the Z v.3 series but at a much lower cost. We start with a double-stacked / 8.66” wide Y35 grade ferrite magnet system coupled to a one-piece, bumped T-Yoke and a 0.6” thick top-plate. Just as with the Z v.3 before it and our other high-end subwoofers we also add a very thick (5mm thickness) aluminum shorting ring inside the magnets to reduce static inductance and level out inductance over stroke. The U series motor also features a 0.6” long pole-extension to keep the coil under control at high levels of excursion. The voice coil is a 2.36” long / 3” diameter 4-layer aluminum winding / aluminum former unit – which is the same coil we use in our X v.2 series and, thus, the U series has the same 1500-watt RMS ratings. The coil temperature is kept in check by a heavily smoothed / high-velocity pole-vent and a series of ten direct air-gap vents in the back plate. The U series also features newly tooled cast aluminum vent rings in between the frame and top plate to effectively exchange air at a high velocity over the voice coil beneath the spider landing. The U series features an all-new cast aluminum frame series to the Sundown line which allows for taller cones than the older frames used on the Z v.3 series. The taller cones provide enhanced coil stability and increased mechanical excursion capability. We also tooled matching cast-aluminum surround clamps for the U series to ensure durability in the most demanding situations. The surrounds and cone bodies have been fully custom tooled especially for the U series and are stronger / support more excursion than the Z v.3 series cones and surrounds. The new cone bodies also feature an indentation for the same wide-flange, ultra-strong dust caps as our new platform subwoofers. If you are looking for a woofer that sounds similar to the SA series but handles significantly more power… the U series is exactly what you need. It has been designed to live up to the reputation earned by our Z v.3 series both in terms of every-day music enjoyment and SPL competition. Specifications Black Aluminum 3” voice coil former for superior heat dissipation High Temperature Round-Wire CCAW voice coil with high-temp black adhesive Double stitched surround Heavy duty cast basket Spring loaded terminals accept up to 8 gauge Stitched-on double-XL tinsel leads Rear vented pole piece Rear drilled gap-venting Innovative high-velocity cast aluminum vented frame spacer ring Magnet ID shorting ring Top-Plate Cooling Channels Cast Aluminum surround bolt-on rings Optimized for small ported or bandpass enclosures Specifications T/S SPECS U 15" D2 U 15" D4 RE (Ohms) 3.8 6.1 FS (Hz) 37.9 34.9 VAS (L) 54.0 63.9 Qes 0.34 0.39 Qms 3.10 3.48 Qts 0.31 0.35 Le (mH) 2.44 3.80 BL (NA) 30.7 34.6 Mms (Grams) 355.7 353.0 Cms (uM/N) 0.05 0.06 Sens (dB @ 1w/1m) 91.2db 90.2db
$599.99
