Resilient Sounds

Optimized Low-Impedance Bass Power The Resilient Sounds GOLD V2 12" D2 is the premier choice for maximizing output when paired with 1 Ohm-stable amplifiers. This 12-inch powerhouse maintains the conservative 1500W RMS rating and features the same high-performance components: a 3-inch 4-layer voice coil, a 220mm triple-stack motor, and a huge 31mm XMAX. The Dual 2 Ohm voice coil configuration is ideal for achieving a final load of 1 Ohm (single amplifier to multiple subs) or 4 Ohms (single subwoofer), making it a high-efficiency solution for competitive and daily driven systems alike. TECHNICAL SPECIFICATIONS Specification Detail Model Gold V2 12" Nominal Impedance Dual 2 Ohm (D2) RMS Power Handling (Conservative) 1500 Watts Maximum Excursion (XMAX) 31MM Voice Coil 3-inch 4 Layer (25% Longer than V1) Motor Structure Triple Stack 220mm Motor with Venting (15% Larger than V1), Engraved Bottom Plate, Molded Motor Boot Surround / Spider NEW High Roll Tooled Surround, 10" Spider Pack with Dual Sewn Leads Frame/Basket Cast Aluminum Frame Terminals 4 Ga Push Terminals Gasket Aluminum Gasket Shorting Ring Aluminum Available Sizes 10", 12", 15", and 18"   RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 1.75 - 2.75 CU FT Tuning Frequency 29 - 33 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 9.125 INCHES Cutout Diameter 11.175 INCHES Displacement 0.20 CU FT Outside Diameter 12 5/32 INCHES

Read more less

Low Impedance, High Impact 10-Inch Bass The Resilient Sounds GOLD V2 10" D2 is engineered for high-efficiency systems where a low final impedance is critical. With a conservative 1500W RMS rating and a monumental 31mm of XMAX, this 10-inch subwoofer delivers uncompromising bass performance. Its core features—including the triple-stacked 220mm motor and the 3-inch 4-layer voice coil—ensure it handles extreme power reliably. The Dual 2 Ohm voice coil is optimized for achieving a 1 Ohm final load when wired in parallel (or 4 Ohms in series), making it the perfect match for high-current, 1 Ohm-stable mono amplifiers.   TECHNICAL SPECIFICATIONS Specification Detail Model Gold V2 10" Nominal Impedance Dual 2 Ohm (D2) RMS Power Handling (Conservative) 1500 Watts Maximum Excursion (XMAX) 31MM Voice Coil 3-inch 4 Layer (25% Longer than V1) Motor Structure Triple Stack 220mm Motor with Venting (15% Larger than V1), Engraved Bottom Plate, Molded Motor Boot, Aluminum Shorting Ring Surround / Spider NEW High Roll Tooled Surround, 8.5" Spider Pack with Dual Sewn Leads Frame/Basket Cast Aluminum Frame Terminals 4 Ga Push Terminals Gasket Aluminum Gasket Available Sizes 10", 12", 15", and 18"   RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 1.25 - 2 CU FT Tuning Frequency 28 - 32 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 8.25 INCHES Cutout Diameter 9 7/16 INCHES Displacement 0.17 CU FT Outside Diameter 10 23/32 INCHES

Read more less

Monumental Power and Excursion in a 15-Inch Chassis The Resilient Sounds PLATINUM V2 15" D2 is engineered to deliver competition-level output and fidelity, serving as a true powerhouse for any advanced audio system. Conservatively rated at a massive 2,500W RMS (5,000 Watts Peak), this 15-inch subwoofer boasts a 13% larger motor assembly and a 20% longer 3-inch 8-layer voice coil, which dramatically increases thermal handling and motor force (BL²/Re is up to 50% higher than the V1). The Dual 2 Ohm configuration provides flexible wiring options for 1 Ohm or 4 Ohm final loads. Featuring a huge 35mm XMAX, a 10-inch spider pack, and a stiff carbon fiber cone, the Platinum V2 15" is ready to produce deep, high-impact bass that will satisfy the most demanding audiophiles.   TECHNICAL SPECIFICATIONS Specification Detail Model Platinum 15 V2 Nominal Impedance Dual 2 Ohm (D2) RMS Power Handling (Conservative) 2,500 Watts Peak Power Handling 5,000 Watts Maximum Excursion (XMAX) 35MM Voice Coil 3-inch 8 Layer (20% Longer than V1) Motor Structure 13% Larger Motor, XL Triple Stacked Cone / Dust Cap Carbon Fiber Surround New High Roll Tooled Surround Spider / Leads 10" Spider Pack with Insulated Dual Leads Frame/Basket Cast Aluminum Frame   RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 2.5 - 3.5 CU FT Tuning Frequency 28 - 33 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 11.25 INCHES Cutout Diameter 14.2363 INCHES Displacement 0.28 CUBIC FT

Read more less

Premium Entry-Level Power and Authority The Resilient Sounds Entry V2 12" represents the peak of the new entry-level lineup, designed to maximize performance with a substantial 750W RMS power rating. This 12-inch subwoofer features significant enhancements in its motor and soft parts, including a robust 3-inch voice coil. This design yields massive increases in motor force (up to 43% in BL factor) over previous models, ensuring powerful and controlled bass. The Dual 4 Ohm impedance allows for wiring to a 2 Ohm or 8 Ohm final load, offering ideal flexibility for high-current mono amplifiers. Built to handle abuse, the RS V2 12" provides lasting, daily resilient bass performance.   TECHNICAL SPECIFICATIONS Specification Detail Model RS 12 V2 RMS Power Handling 750 Watts Voice Coil 3" Nominal Impedance Dual 4 Ohm THIELE-SMALL PARAMETERS Sensitivity (SPL) 85.7 dB Resonance Frequency (Fs) 31.140 Hz BL Factor (BL) 28.793 DC Resistance (RE) 7.6 Ohms Mechanical Q (QMS) 3.023 Electrical Q (QES) 0.483 Total Q (QTS) 0.416 Compliance (CMS) 0.097 uM/N Moving Mass (MMS) 269.274 g Equivalent Volume (VAS) 38.831 L RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 1.5 - 2.25 CU FT Tuning Frequency 28 - 32 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 6.75 INCHES Cutout Diameter 11.14 INCHES

Read more less

New and Improved Entry-Level Performance The Resilient Sounds Entry V2 10" is part of the new and improved entry-level model lineup, boasting significant upgrades in its soft parts and motor design. This 10-inch subwoofer is rated at a solid 600W RMS and features a 2.5-inch voice coil, contributing to notable performance increases, including a large jump in BL factor and motor strength. It is engineered for a lasting daily resilient performance with a focus on clean signal handling, making it an excellent balance of power, sound quality, and value. With a nominal impedance of Dual 4 Ohm, it can be wired for a final 2 Ohm or 8 Ohm load.   TECHNICAL SPECIFICATIONS Specification Detail Model RS 10 V2 RMS Power Handling 600 Watts Voice Coil 2.5" Nominal Impedance Dual 4 Ohm THIELE-SMALL PARAMETERS Sensitivity (SPL) 84.9 dB Resonance Frequency (Fs) 36.940 Hz BL Factor (BL) 27.336 DC Resistance (RE) 8 Ohms Mechanical Q (QMS) 2.736 Electrical Q (QES) 0.426 Total Q (QTS) 0.368 Compliance (CMS) 0.17 uM/N Moving Mass (MMS) 171.257 g Equivalent Volume (VAS) 16.767 L   RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 1.0 - 1.6 CU FT Tuning Frequency 32 - 36 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 5.75 INCHES Cutout Diameter 9.17 INCHES

Read more less

Impressive Performance in a Compact 8-Inch Design The Resilient Sounds Entry V2 8" is a versatile and high-performing entry-level subwoofer designed to deliver outstanding low-end response while maintaining a compact form factor. This 8-inch woofer is conservatively rated at 500W RMS and features a double-stacked, FEA-optimized motor and a 2-inch voice coil. Its sturdy construction and optimized design ensure reliable performance and a remarkably resilient daily listening experience. With a nominal impedance of Dual 4 Ohm, it offers system flexibility, allowing for a final 2 Ohm or 8 Ohm load.   TECHNICAL SPECIFICATIONS Specification Detail Model RS 8 V2 RMS Power Handling 500 Watts Voice Coil 2" Nominal Impedance Dual 4 Ohm THIELE-SMALL PARAMETERS Sensitivity (SPL) 80.9 dB Resonance Frequency (Fs) 35.728 Hz BL Factor (BL) 21.323 DC Resistance (RE) 8 Ohms Mechanical Q (QMS) 2.674 Electrical Q (QES) 0.488 Total Q (QTS) 0.413 Compliance (CMS) 0.16 uM/N Moving Mass (MMS) 123.556 g Equivalent Volume (VAS) 8.547 L   RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 0.5 - 0.75 CU FT Tuning Frequency 30 - 34 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 5 INCHES Cutout Diameter 7.25 INCHES

Read more less

The Pinnacle of Competition-Grade Low-Frequency Output The Resilient Sounds PLATINUM V2 18" D1 is purpose-built for the most extreme and competitive audio systems, delivering maximum output at ultra-low impedance. This flagship 18-inch subwoofer maintains a conservative 2,500W RMS rating, utilizing a 13% larger motor and a 20% longer 3-inch 8-layer voice coil to provide unmatched force and thermal stability. The Dual 1 Ohm impedance is the definitive configuration for maximizing amplifier power, allowing for an incredibly low 0.5 Ohm final load when wired in parallel. With a colossal 35mm XMAX, the Platinum V2 18" pushes the boundaries of low-frequency reproduction with authority, speed, and precision.   TECHNICAL SPECIFICATIONS Specification Detail Model Platinum 18 V2 Nominal Impedance Dual 1 Ohm (D1) RMS Power Handling (Conservative) 2,500 Watts Peak Power Handling 5,000 Watts Maximum Excursion (XMAX) 35MM Voice Coil 3-inch 8 Layer (20% Longer than V1) Motor Structure 13% Larger Motor, XL Triple Stacked Cone / Dust Cap Carbon Fiber Surround New High Roll Tooled Surround Spider / Leads 10" Spider Pack with Insulated Dual Leads Frame/Basket Cast Aluminum Frame   RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 4 - 6 CU FT Tuning Frequency 28 - 33 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 12.5 INCHES Cutout Diameter 16.93 INCHES Displacement 0.33 CUBIC FT

Read more less

Unmatched Scale and Sheer Power in an 18-Inch Driver The Resilient Sounds PLATINUM V2 18" D2 is the ultimate subwoofer for maximum scale and output, combining an extreme 18-inch cone area with top-tier motor technology. Conservatively rated at a crushing 2,500W RMS (5,000 Watts Peak), this driver is built around a 13% larger motor assembly and a 20% longer 3-inch 8-layer voice coil, resulting in a dramatic increase in motor force (up to 50% more BL²/Re than the V1). The Dual 2 Ohm impedance allows for flexible wiring to 1 Ohm or 4 Ohm final loads. With a massive 35mm XMAX, a durable 10-inch spider pack, and a stiff carbon fiber cone, this 18-inch Platinum V2 is engineered for the highest demands of output and clarity.   TECHNICAL SPECIFICATIONS Specification Detail Model Platinum 18 V2 Nominal Impedance Dual 2 Ohm (D2) RMS Power Handling (Conservative) 2,500 Watts Peak Power Handling 5,000 Watts Maximum Excursion (XMAX) 35MM Voice Coil 3-inch 8 Layer (20% Longer than V1) Motor Structure 13% Larger Motor, XL Triple Stacked Cone / Dust Cap Carbon Fiber Surround New High Roll Tooled Surround Spider / Leads 10" Spider Pack with Insulated Dual Leads Frame/Basket Cast Aluminum Frame   RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 4 - 6 CU FT Tuning Frequency 28 - 33 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 12.5 INCHES Cutout Diameter 16.93 INCHES Displacement 0.33 CUBIC FT

Read more less

The Ultimate Low-Impedance Subwoofer for Extreme Systems The Resilient Sounds PLATINUM V2 15" D1 is the choice for serious bass enthusiasts and competitors seeking to run ultra-low impedance loads. Built to handle a conservative 2,500W RMS, this 15-inch driver is optimized for maximum thermal and magnetic performance with its 13% larger motor and 20% longer 3-inch 8-layer voice coil. The Dual 1 Ohm impedance allows for wiring in parallel to achieve an extremely low 0.5 Ohm final load, unlocking the full potential of 0.5 Ohm-stable competition-grade amplifiers. The combination of 35mm XMAX, carbon fiber cone, and heavy-duty suspension ensures this subwoofer moves huge amounts of air with unmatched authority and control.   TECHNICAL SPECIFICATIONS Specification Detail Model Platinum 15 V2 Nominal Impedance Dual 1 Ohm (D1) RMS Power Handling (Conservative) 2,500 Watts Peak Power Handling 5,000 Watts Maximum Excursion (XMAX) 35MM Voice Coil 3-inch 8 Layer (20% Longer than V1) Motor Structure 13% Larger Motor, XL Triple Stacked Cone / Dust Cap Carbon Fiber Surround New High Roll Tooled Surround Spider / Leads 10" Spider Pack with Insulated Dual Leads Frame/Basket Cast Aluminum Frame   RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 2.5 - 3.5 CU FT Tuning Frequency 28 - 33 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 11.25 INCHES Cutout Diameter 14.2363 INCHES Displacement 0.28 CUBIC FT

Read more less

Competition-Ready Low-Impedance Powerhouse The Resilient Sounds PLATINUM V2 12" D1 is purpose-built for competition and extreme daily driving, where maximizing amplifier output with a low impedance load is essential. This 12-inch subwoofer maintains a conservative 2,500W RMS power rating and features a 13% larger motor with a 3-inch 8-layer voice coil that is 20% longer than its predecessor, delivering incredible motor force and thermal capacity. The Dual 1 Ohm impedance is the ultimate configuration for achieving an ultra-low 0.5 Ohm final load when wired in parallel, catering to the most powerful, low-impedance stable amplifiers on the market. Its 35mm XMAX and carbon fiber cone ensure both power and fidelity are maximized.   TECHNICAL SPECIFICATIONS Specification Detail Model Platinum 12 V2 Nominal Impedance Dual 1 Ohm (D1) RMS Power Handling (Conservative) 2,500 Watts Peak Power Handling 5,000 Watts Maximum Excursion (XMAX) 35MM Voice Coil 3-inch 8 Layer (20% Longer than V1) Motor Structure 13% Larger Motor, XL Triple Stacked Cone / Dust Cap Carbon Fiber Surround New High Roll Tooled Surround Spider / Leads 10" Spider Pack with Insulated Dual Leads Frame/Basket Cast Aluminum Frame   RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 2.00 - 3.00 CU FT Tuning Frequency 28 - 33 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 10.25 INCHES Cutout Diameter 11.175 INCHES Displacement 0.25 CU FT

Read more less

The Apex of 12-Inch Subwoofer Engineering The Resilient Sounds PLATINUM V2 12" D2 sets a new standard for high-performance subwoofers, engineered for enthusiasts who demand extreme output and reliability. Conservatively rated at a monstrous 500W RMS (5,000 Watts Peak), this 12-inch driver features a 13% larger motor and a 20% longer 3-inch 8-layer voice coil compared to the V1, resulting in up to a 50% increase in motor force (BL²/Re). The Dual 2 Ohm impedance provides flexible wiring for 1 Ohm or 4 Ohm final loads. Combined with a massive 35mm XMAX, a 10-inch spider pack, and a premium carbon fiber cone, this subwoofer delivers clean, chest-thumping bass designed to dominate.   TECHNICAL SPECIFICATIONS Specification Detail Model Platinum 12 V2 Nominal Impedance Dual 2 Ohm (D2) RMS Power Handling (Conservative) 2,500 Watts Peak Power Handling 5,000 Watts Maximum Excursion (XMAX) 35MM Voice Coil 3-inch 8 Layer (20% Longer than V1) Motor Structure 13% Larger Motor, XL Triple Stacked Cone / Dust Cap Carbon Fiber Surround New High Roll Tooled Surround Spider / Leads 10" Spider Pack with Insulated Dual Leads Frame/Basket Cast Aluminum Frame RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 2.00 - 3.00 CU FT Tuning Frequency 28 - 33 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 10.25 INCHES Cutout Diameter 11.175 INCHES Displacement 0.25 CU FT

Read more less

Competition-Grade Low-Impedance Bass The Resilient Sounds PLATINUM V2 10" D1 is built for the most demanding audio systems that require ultra-low impedance operation to maximize amplifier output. Engineered to handle a conservative 2,500W RMS, this 10-inch woofer features an XL triple-stacked motor, a 20% longer 3-inch 8-layer voice coil, and a class-leading 35mm of XMAX. Its motor strength is drastically improved, with a BL²/ℜe increase of up to 50% compared to the V1 model. The Dual 1 Ohm impedance option is specifically designed for competitive or extreme daily applications, allowing users to achieve an ultra-low 0.5 Ohm load when wired in parallel, maximizing the performance of high-current, 0.5 Ohm-stable amplifiers.   TECHNICAL SPECIFICATIONS Specification Detail Model Platinum 10 V2 Nominal Impedance Dual 1 Ohm (D1) RMS Power Handling (Conservative) 2,500 Watts Peak Power Handling 5,000 Watts Maximum Excursion (XMAX) 35MM Voice Coil 3-inch 8 Layer (20% Longer than V1) Motor Structure XL Triple Stacked Motor Cone / Dust Cap Carbon Fiber Surround New High Roll Tooled Surround Spider / Leads 8.5" Spider Pack with Insulated Dual Leads Frame/Basket Cast Aluminum Frame   RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 1.5 - 2.25 CU FT Tuning Frequency 28 - 33 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 9.125 INCHES Cutout Diameter 9 7/16 INCHES Displacement 0.22 CU FT  

Read more less

Extreme Power and Precision in a Compact Design The Resilient Sounds PLATINUM V2 10" D2 is engineered for extreme power handling and sound quality, representing the next evolution of Resilient Sounds' high-end line. Conservatively rated at 2,500W RMS (5,000 Watts Peak), this 10-inch subwoofer features an XL triple-stacked motor and a 20% longer 3-inch 8-layer voice coil for superior thermal management and motor strength, yielding an increase of up to 50% in the motor's force factor compared to the V1. The Dual 2 Ohm impedance is perfectly suited for high-powered systems, allowing for a 1 Ohm or 4 Ohm final load. With a 35mm XMAX and a durable carbon fiber cone, the Platinum V2 delivers clean, aggressive bass that pushes the limits of a 10-inch driver.   TECHNICAL SPECIFICATIONS Specification Detail Model Platinum 10 V2 Nominal Impedance Dual 2 Ohm (D2) RMS Power Handling (Conservative) 2,500 Watts Peak Power Handling 5,000 Watts Maximum Excursion (XMAX) 35MM Voice Coil 3-inch 8 Layer (20% Longer than V1) Motor Structure XL Triple Stacked Motor Cone / Dust Cap Carbon Fiber Surround New High Roll Tooled Surround Spider / Leads 8.5" Spider Pack with Insulated Dual Leads Frame/Basket Cast Aluminum Frame   RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 1.5 - 2.25 CU FT Tuning Frequency 28 - 33 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 9.125 INCHES Cutout Diameter 9 7/16 INCHES Displacement 0.22 CU FT

Read more less

Unrivaled Power Density in a 10-Inch Frame The Resilient Sounds GOLD V2 10" D4 subwoofer is a compact powerhouse, packing the high-performance features of the GOLD V2 line into a 10-inch format that excels in tight spaces. Conservatively rated at 1500W RMS, it is built for extreme output, featuring an immense 31mm of XMAX and a powerful, triple-stacked 220mm motor structure. The Dual 4 Ohm voice coil is perfect for common wiring configurations, allowing users to easily achieve a 2 Ohm or 8 Ohm final load. Utilizing a high-roll surround, 8.5-inch spider pack, and a rugged cast aluminum frame, this 10-inch woofer is designed to deliver authoritative, precise bass that belies its size.   TECHNICAL SPECIFICATIONS Specification Detail Model Gold V2 10" Nominal Impedance Dual 4 Ohm (D4) RMS Power Handling (Conservative) 1500 Watts Maximum Excursion (XMAX) 31MM Voice Coil 3-inch 4 Layer (25% Longer than V1) Motor Structure Triple Stack 220mm Motor with Venting (15% Larger than V1), Engraved Bottom Plate, Molded Motor Boot, Aluminum Shorting Ring Surround / Spider NEW High Roll Tooled Surround, 8.5" Spider Pack with Dual Sewn Leads Frame/Basket Cast Aluminum Frame Terminals 4 Ga Push Terminals Gasket Aluminum Gasket Available Sizes 10", 12", 15", and 18"     RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 1.25 - 2 CU FT Tuning Frequency 28 - 32 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 8.25 INCHES Cutout Diameter 9 7/16 INCHES Displacement 0.17 CU FT Outside Diameter 10 23/32 INCHES

Read more less

Reference-Grade Performance in a 12-Inch Platform The Resilient Sounds GOLD V2 12" D4 subwoofer delivers the same extreme performance features as its larger siblings, engineered for enthusiasts who demand high excursion and robust power handling in a space-conscious 12-inch format. Conservatively rated at 1500W RMS, it is built around a heavy-duty, triple-stacked 220mm motor and an extended 3-inch 4-layer voice coil, allowing for an incredible 31mm of linear excursion (XMAX). The Dual 4 Ohm voice coil is optimized for flexible wiring, allowing system designers to easily achieve a 2 Ohm or 8 Ohm final load, perfect for most common mono amplifier setups. TECHNICAL SPECIFICATIONS Specification Detail Model Gold V2 12" Nominal Impedance Dual 4 Ohm (D4) RMS Power Handling (Conservative) 1500 Watts Maximum Excursion (XMAX) 31MM Voice Coil 3-inch 4 Layer (25% Longer than V1) Motor Structure Triple Stack 220mm Motor with Venting (15% Larger than V1), Engraved Bottom Plate, Molded Motor Boot Surround / Spider NEW High Roll Tooled Surround, 10" Spider Pack with Dual Sewn Leads Frame/Basket Cast Aluminum Frame Terminals 4 Ga Push Terminals Gasket Aluminum Gasket Shorting Ring Aluminum Available Sizes 10", 12", 15", and 18"   RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 1.75 - 2.75 CU FT Tuning Frequency 29 - 33 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 9.125 INCHES Cutout Diameter 11.175 INCHES Displacement 0.20 CU FT Outside Diameter 12 5/32 INCHES

Read more less

Unleash Deep Bass Power with the Resilient Sounds The Resilient Sounds GOLD V2 15" D2 is designed to maximize output from amplifiers rated for 1 Ohm stability. Sharing the robust foundation of the GOLD V2 line, it handles a conservative 1500W RMS and features an advanced motor assembly, including a 3-inch 4-layer voice coil and 31mm of linear excursion (XMAX). This subwoofer is engineered for those who prioritize massive bass output and require a low-impedance setup. The Dual 2 Ohm voice coil configuration makes it perfectly suited for wiring two woofers to a 1 Ohm final load or a single woofer to a 4 Ohm load, offering unparalleled flexibility in high-power car audio systems.   TECHNICAL SPECIFICATIONS Specification Detail Model Gold V2 15" Nominal Impedance Dual 2 Ohm (D2) RMS Power Handling (Conservative) 1500 Watts Maximum Excursion (XMAX) 31MM Voice Coil 3-inch 4 Layer (25% Longer than V1) Motor Structure Triple Stack 220mm Motor with Venting (15% Larger than V1), Engraved Bottom Plate, Molded Motor Boot Surround / Spider NEW High Roll Tooled Surround, 10" Spider Pack with Dual Sewn Leads Frame/Basket Cast Aluminum Frame Terminals 4 Ga Push Terminals Gasket Aluminum Gasket Shorting Ring Aluminum Available Sizes 10", 12", 15", and 18"   RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 2.25 - 3.25 CU FT Tuning Frequency 28 - 32 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 10.375 INCHES Cutout Diameter 14.2363 INCHES Displacement 0.24 CU FT Outside Diameter 15 7/32 INCHES

Read more less

Compact Power with Uncompromised Performance The Resilient Sounds GOLD V2 15" D4 subwoofer delivers the same legendary power handling and excursion capabilities of its larger sibling in a more compact size, making it perfect for tighter installations. Conservatively rated at 1500W RMS, this woofer features a robust, triple-stacked 220mm motor structure and an extended 3-inch 4-layer voice coil, ensuring durability and high output under extreme demand. The Dual 4 Ohm voice coil allows for versatile system wiring to achieve a final 2 Ohm or 8 Ohm load, providing excellent flexibility for high-current mono amplifiers. With 31mm of XMAX and a high-roll surround, the GOLD V2 15" is built to move massive amounts of air with precision.   TECHNICAL SPECIFICATIONS Specification Detail Model Gold V2 15" Nominal Impedance Dual 4 Ohm (D4) RMS Power Handling (Conservative) 1500 Watts Maximum Excursion (XMAX) 31MM Voice Coil 3-inch 4 Layer (25% Longer than V1) Motor Structure Triple Stack 220mm Motor with Venting (15% Larger than V1), Engraved Bottom Plate, Molded Motor Boot Surround / Spider NEW High Roll Tooled Surround, 10" Spider Pack with Dual Sewn Leads Frame/Basket Cast Aluminum Frame Terminals 4 Ga Push Terminals Gasket Aluminum Gasket Shorting Ring Aluminum Available Sizes 10", 12", 15", and 18"   RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 2.25 - 3.25 CU FT Tuning Frequency 28 - 32 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 10.375 INCHES Cutout Diameter 14.2363 INCHES Displacement 0.24 CU FT Outside Diameter 15 7/32 INCHES

Read more less

High-Performance Output for Low Impedance Systems The Resilient Sounds GOLD V2 18" D2 is the ideal choice for high-power system builders aiming for a low final impedance load. Its 1500W RMS conservative rating is achieved through superior engineering, including a premium 3-inch 4-layer voice coil and a triple-stacked 220mm magnet assembly. The high-roll tooled surround and 10-inch spider package ensure stability and control even at the extreme 31mm XMAX limit. The Dual 2 Ohm voice coil is perfectly suited for 1 Ohm or 4 Ohm wiring configurations, offering maximum flexibility when designing systems around 1 Ohm-stable amplifiers.   TECHNICAL SPECIFICATIONS Specification Detail Model Gold V2 18" Nominal Impedance Dual 2 Ohm (D2) RMS Power Handling (Conservative) 1500 Watts Maximum Excursion (XMAX) 31MM Voice Coil 3-inch 4 Layer (25% Longer than V1) Motor Structure Triple Stack 220mm Motor with Venting (15% Larger than V1), Engraved Bottom Plate, Molded Motor Boot Surround / Spider NEW High Roll Tooled Surround, 10" Spider Pack with Dual Sewn Leads Frame/Basket Cast Aluminum Frame Terminals 4 Ga Push Terminals Gasket Aluminum Gasket Shorting Ring Aluminum Available Sizes 10", 12", 15", and 18"   RECOMMENDED ENCLOSURE SPECIFICATIONS Specification Detail Internal Volume (Cubic Ft) 4 - 6 CU FT Tuning Frequency 28 - 32 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 11.56 INCHES Cutout Diameter 16.93 INCHES Displacement 0.28 CU FT Outside Diameter 18 5/32 INCHES

Read more less

Unyielding Power and Precision The Resilient Sounds GOLD V2 18" is engineered for the serious audio enthusiast seeking massive, accurate bass from a conservatively rated power platform. The V2 generation brings significant upgrades, including a larger, heavily-vented triple-stack 220mm motor and an extended 3-inch 4-layer voice coil, which contribute to its impressive 31mm of XMAX. Built on a robust cast aluminum frame, the GOLD V2 is designed for longevity and peak performance. The Dual 4 Ohm voice coil allows for flexible wiring options, achieving a final load of 2 Ohms or 8 Ohms to match a wide range of mono amplifiers.   TECHNICAL SPECIFICATIONS Specification Detail Model Gold V2 18" Nominal Impedance Dual 4 Ohm (D4) RMS Power Handling (Conservative) 1500 Watts Maximum Excursion (XMAX) 31MM Voice Coil 3-inch 4 Layer (25% Longer than V1) Motor Structure Triple Stack 220mm Motor with Venting (15% Larger than V1) Shorting Ring Aluminum Spider/Leads 10" Spider Pack with Dual Sewn Leads Frame/Basket Cast Aluminum Frame Terminals 4 Ga Push Terminals Outside Diameter 18 5/32 Inches Cutout Diameter 16.93 Inches Mounting Depth 11.56 Inches Displacement 0.28 CU FT RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 4 - 6 CU FT Tuning Frequency 28 - 32 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 11.56 INCHES Cutout Diameter 16.93 INCHES Displacement 0.28 CU FT Outside Diameter 18 5/32 INCHES

Read more less