Sundown Audio
-
Sundown Audio Sundown Audio SA-Classic 12" Subwoofer
1000 Watt RMS/ 2000 Watt Peak Dual 2 or 4 ohm voice coils Optimized for small ported, sealed, & band-pass enclosures Large aluminum Faraday ring for smooth acoustic response High strength cast aluminum frame Low distortion motor construction High-temperature voice coil wire Spring-loaded terminals Stitched-on “XL” tinsel lead wires The SA Classic sub is a stunning combination of value, power handling, and deep excursion. It features a cast aluminum frame that houses a bulletproof custom 2.5-inch voice coil, robust double-layered Nomex spider, and SPL competition-grade paper cone. These components are built into a flexible design that works well in any type of enclosure. Enclosure Designs .Zip File
$339.99
-
Sundown Audio Sundown Audio Two-Pack ANL Fuses
ANL Fuse (Two-Pack) For main DC circuit protection on large battery banks and/or amplifiers. Features & Specifications Available in: 100A,150A,200A,250A and 300A Silver-plated connector blades for corrosion resistance Visible indication of blown condition For use with Sundown Audio & other brand ANL Fuse Blocks.
$7.99
-
Sundown Audio Sundown Audio E-Series V.4 12” Subwoofer
750 Watts RMS / 1500 Watts Peak Dual 2 or 4 ohm voice coils Optimized for ported enclosures Class-leading 14mm Xmax Double-stacked magnet Vented magnetic gap & pole piece for superior cooling High strength stamped steel frame High temp 4-layer copper voice coil wire High-quality push terminals Stitched-on Mini-XL tinsel leads Through relentless research in our North Carolina Headquarters, Sundown optimized a 2.5” voice coil and a truly unique motor design to get the deepest possible bass response out of a 12” subwoofer. The subwoofer showcases a distinctive motor design, featuring a heavily vented magnetic gap and solid pole piece, enabling exceptional thermal power handling. The spider itself is a high strength poly-cotton blend designed to handle the full capacity of the motor. To provide an additional level of ruggedness the spider is bolted down and glued to the frame. Its motor geometry allows for a remarkable 14mm one-way linear Xmax, delivering excursion equivalent to far larger cones.
$244.99
-
AURRAS Demi-God DG-3000.1 MONO AMPLIFIER
1120W x 1 RMS @ 4 ohms Mono (14.4V) 2450W x 1 RMS @ 2 ohms Mono (14.4V) 4300W x 1 RMS @ 1 ohm Mono (14.4V) Linked Capable: Up to 8600W x 1 @ 2 ohms (14.4V) Precision variable Low-Pass Filter (30Hz-250Hz) Essential Subsonic Filter (10Hz-60Hz) Adjustable Bass Boost (0-12dB @ 45Hz) and Phase Control (0-180°) Exceptional Signal to Noise Ratio: 95dB for clean bass delivery If there's one thing The Amp Lab knows, it's amplifiers! Since 2016, we have worked on thousands of amplifiers, and we've used that knowledge, along with our over 25 years of hands-on experience in the car audio installation profession, to bring you Aurras. Our goal with the Aurras Demi-God DG-3000.1 is not to bring you the newest or most flashy amp on the market, but to deliver what we believe is the most reliable, capable, tested, and trusted amplifier design available! This high-power mono amplifier provides the massive, dependable output required for serious subwoofers while offering precise control over the crucial low-frequency range. The Demi-God DG-3000.1 is engineered for maximum performance and durability, featuring a robust circuit design capable of extreme power delivery, including Linked Operation for combining two units into a single colossal amplifier. Its highly efficient design, with 90% efficiency at 4 ohms, ensures maximum output with minimal wasted heat. Controls like the Subsonic Filter, Bass Boost, and Phase Control allow you to perfectly integrate your subwoofer system into your vehicle's acoustics for deep, impactful, and controlled bass. SPECIFICATIONS Rated Power Output: 3000W Input Sensitivity: 8V-200mV Signal to Noise Ratio: 95dB Low-Pass Filter: 30Hz-250Hz Subsonic Filter: 10Hz-60Hz Bass Boost (45Hz): 0-12dB Phase Control: 0-180° Frequency Response: 10Hz-350Hz T.H.D. @ 4 ohm, 100Hz: 0.15% Efficiency @ 4 ohm, 100Hz: 90% Operating Voltage: DC 12V-16V Recommended Fuse Rating: 300A (600A for Linked Operation) Dimensions: 22.05" L x 9.45" W x 2.40" H Specification Details Continuous Power Output @14.4V / @12.8V - RMS Power, 4 ohms Mono 1120W × 1CH / 1020W × 1CH - RMS Power, 2 ohms Mono 2450W × 1CH / 2200W × 1CH - RMS Power, 1 ohm Mono 4300W × 1CH / 3700W × 1CH - RMS Power, 4 ohms Linkable / Dual Mono 4900W × 1CH / 4400W × 1CH - RMS Power, 2 ohms Linkable / Dual Mono 8600W × 1CH / 7400W × 1CH Signal to Noise Ratio 95 dB Low Pass Frequency Crossover 30 Hz – 250 Hz Subsonic Filter 10 Hz – 60 Hz Bass Boost @ 45Hz 0 – 12 dB Phase Shift Control 0 – 180° Frequency Response 10 Hz – 350 Hz (±1 dB) T.H.D Continuous @ 4 ohms, 100Hz 0.15% Efficiency @ 4 ohms, 100Hz 90% Input Sensitivity 8V – 200mV (±5%) Dimensions (mm) 240 (W) × 61 (H) × 560 (L) Operating Voltage DC 12V – 16V Recommended Fuse Rating 300A (Linked: 600A)
$549.99 $399.99
-
Sundown Audio Sundown Audio OFH-WP ANL Waterproof Silver Finish Fuse Holder
Fuse Holder, ANL, 1/0, 4AWG For main DC circuit protection on large battery banks and/or amplifiers. Features & Specifications ANL Fuse & Fuse Holder Angled holder, accepts 1/0 AWG Power Cable 300 AMP ANL Fuse Included Waterproof Design Visible indication of blown condition For use with Sundown Audio & other brand ANL Fuse Blocks.
$25.99
-
Sundown Audio SML-Series 12” Thin Subwoofer
600 Watts RMS/1200 Watts Peak Dual 2 or 4 ohm voice coils Black Aluminum 2.5” voice coil former for superior heat dissipation High temperature 4-layer copper voice coil wire Stitched-on “Mini-XL” tinsel leads to prevent fatigue and failure Vented pole-piece and multi-vented magnetic gap Dual-magnet design for smooth acoustic response Custom tooled cone shape for reduced mechanical noise over high excursion Bolt-through motor design to ensure maximum longevity and ruggedness Introducing the SML series: a revolutionary line of subwoofers by Sundown Audio. This series is an inch shallower than the SLD line, yet delivers nearly the same excursion, making it the ultimate choice for customers in search of an extremely shallow driver with deep bass. Specifically designed to fit under or behind your seat, the SML series excels in performance, especially within small enclosures.
$249.99
-
Sundown Audio Sundown Audio X-Series v.2 6.5" Subwoofer
The X-6.5SW is Sundown Audio's first true sub-woofer smaller than 8 inches in diameter. It features a voice coil identical in winding dimensions to their SA-8 v.3 subwoofer (a massive 2” diameter coil with a 1.4” winding height) so thermal power handling is absolutely massive. Specifications: Xmax: 16mm one-way by 70% BL RMS Power: 400-watts Large noise-free pole vent design Specially designed spiral-cut basket venting technique (unique to this model in our line) 2” diameter 4-Layer CCAW wire voice coil wound on thick Kapton former Copper Pole-Cap For Reduced Inductive Distortion Integrated Tinsel Leads to prevent lead slapping Proprietary flat aluminum diaphragm Note on Power Handling: This woofer is mechanically limited. It requires a SMALL ported enclosure. Placing it in a large or sealed enclosure will reduce mechanical power handling substantially. Ported: 0.25-0.33 ft^3 volume Box Recommendations: Sealed: .15 ft^3 Ported: 0.3 ft^3 Displacement: .05 ft^3 Depth: 4.00" Outside Diameter: 6.75" Cut-Out: 5.52" Recommended Tuning: 32hz Recommended Port Area: 4 in^2
$149.99
-
Sundown Audio Sundown Audio SA-Classic 10" Subwoofer
1000 Watt RMS/ 2000 Watt Peak Dual 2 or 4 ohm voice coils Optimized for small ported, sealed, & band-pass enclosures Large aluminum Faraday ring for smooth acoustic response High strength cast aluminum frame Low distortion motor construction High-temperature voice coil wire Spring-loaded terminals Stitched-on “XL” tinsel lead wires The SA Classic sub is the perfect combination of power handling and deep excursion. A cast aluminum frame houses a bulletproof custom 2.5-inch voice coil, robust double-layered Nomex spider, and SPL competition-grade paper cone, all built into a flexible design that works in any kind of enclosure. Enclosure Designs .Zip File
$319.99
-
Sundown Audio Sundown Audio Heat Shrink
Protect your cable crimp ends with style. Features & Specifications Sold in 10-Pack, Red or Black.
$4.49 - $5.99
-
Sundown Audio Sundown Audio VEX-10 500 Watt Pro Audio Midrange Speaker
Power Handling: 500 Watts RMS Impedance: 4/8-ohm SVC Vented cast frame 3-inch voice coil X-Max: 9mm Carbon fiber cone Excellent for Mid-bass High strength ferrite motor Dual shorting rings for smooth response Mounting depth : 5.2" Rear Vented Spring Loaded Terminals With an enormous 2.5” voice coil and a super-efficient cooling system, the VEX handles 300 watts of power with ease. We went with real carbon-fiber cone to handle high SPL systems without breakup, and achieved a 94.3dB sensitivity by combining a large diameter, high strength ferrite motor with a neodymium pole-cap magnet! A sturdy cast-aluminum frame features extensive spider cavity vents to further increase thermal power handling. The Sundown Audio VEX is one of the loudest, best sounding high-efficiency midrange drivers in existence. Frequency Response
$319.99 $199.99
-
Sundown Audio Sundown Audio LCS v.2 12" Subwoofer
• 500 Watts RMS / 1000 Watts Peak• Dual 4-ohm voice coils• Optimized for small, ported enclosures• Class-leading 14mm Xmax• Double-stacked magnet• Vented coil gap & pole for superior cooling• Extra thick stamped steel frame• High temp 4-layer copper voice coil• High-quality push terminals• Stitched-on flat tinsel leads• Extremely low resonant frequency (Fs) Find the ideal balance of power, deep bass, and affordability with Sundown LCS subs. Sundown LCS woofers are known for their impressive bass response and high dependability. Typical entry-level woofers are limited in terms of excursion, mechanical ruggedness, and thermal performance. The v.2 update added an all-new, custom-tooled frame, push terminals, a rubber mounting gasket, and upgraded tinsel leads.
$174.99
-
Sundown Audio Sundown Audio Nightshade NS-Series NS6 15" 3000W Subwoofer NS v.6
3500 Watt RMS / 7000 Watt Peak Dual 1 or 2 ohm voice coils Optional carbon cone/dustcap available Custom tooled basket Custom-tooled ultra-linear spider packs Extended shorting ring Eight-layer voice coil Custom tooled basket Cast aluminum cooling ring Ultra-linear spider pack Unique air exchanging system forces hot air out and cool air in Aluminum vent ring Ultra-linear Mega Roll V2 surround Features: The Nightshade 3,000-watt Neodymium sub is engineered to deliver incredibly powerful low end, with an extremely linear excursion and next-level thermal management. It features an eight-layer voice coil for excellent power handling and an extended shorting ring to minimize distortion and deliver a smooth, highly accurate sound at extreme SPL levels.
$1,049.99
-
Sundown Audio Sundown Audio GT-1R Super Tweeter
Power Handling: 100 Watts RMS Impedance: 4 or 8 Ohms Frequency range: 4kHz - 20kHz Sensitivity 100dB Sold Individually Handling 100 watts and sporting a slender mounting ring, the GT-R1 is the choice when you want the tweeter to take up a smaller footprint on your door, but want to hear those highs no matter how loud the bass is. With an incredible 100dB sensitivity and a wide frequency range, this super tweeter makes the most out of every watt you give it.
$39.99
-
Sundown Audio SA-Series SA-3M 3" Speaker
The all-new 2025 Sundown SA speaker series has been designed to make a statement. What statement, you may ask? That Sundown Audio can be just as serious about SQ as we are about SPL. Many people already know this but our subwoofers – even the ones used for crushing demos – have some of the lowest distortion on the market. We are now bringing our unique approach to the more dedicated Sound Quality market.Starting at the upper end of the frequency spectrum we have the SA-1T Tweeter. The SA-1T features a 25.5mm silk dome (total 38mm including surround) driven by a powerful neodymium motor structure. The dome features a compact, tuned back chamber which helps it to achieve its extremely low FS around 700hz. This gives you an enormous amount of flexibility in choosing the crossover. The tweeter can be used as a 2-way with the 6.5M or the 8M models or as part of a three way with either and the 3M model. In addition to the low FS and smooth response the SA-1T has a very high 92dB sensitivity so it doesn't take much power to get loud enough for just about anyone. The SA-1T is the 4th generation SA tweeter building on the success of the tweeter found in the SA Component sets over three generations.Headed down the spectrum to the midrange we have the SA-3M. This "little" unit is something incredibly special and is a favorite project of lead product designer / founder Jacob Fuller. We really went all-out on this unit to address the "big 3" drivers of distortion. The SA-3M features 4.5mm of one-way linear excursion by 70% BL (with 8mm x-mech thanks to the custom tooled frame – so no bottoming out even on powerful dynamics) and over 6mm by CMS and LE definitions on Klippel. There is essentially NO risk of the driver reaching linearity limits in most applications. The beefy motor structure is a combination of ferrite and a neodymium pole cap magnet to help us reach 84.5dB sensitivity at 1-watt. There is a double LE treatment internal to the motor via both a copper pole sleeve and an aluminum magnet ID shorting ring allowing the SA-3M to play full-range to beyond 20khz (although, for several reasons, we do suggest using a tweeter for the top-end). On the bottom end they can be high-pass crossed over at 300hz effortlessly with 150-watts of power handling (thanks to the 28mm diameter, extra-long voice coil) or even lower if needed, with less power, due to the incredibly high linear stroke. The suspension system, surround and spider, of the SA-3M took over a year of FEA simulations and testing to reach perfection and is just as important as the motor to the resulting low distortion. We gave the suspension just as much attention as we would for a full blown high-stroke subwoofer. To finish off this masterpiece we tested several different types of woven carbon fiber cones & dust caps to achieve the best FR possible.To finish off the 2025 SA speaker line we created the SA-6.5M and the SA-8M. Both of which can be used as a mid-bass or mid-range speaker depending on your application. Both drivers feature the same attention to detail as the 3M regarding the carbon cone and dust cap, surround, and spider. All of these parts were fully FEA simulated and Klippel verified.The SA-6.5M features 5.9mm one-way linear excursion by 70% BL, 7mm by CMS, and 6.28mm by LE on Klippel. Thanks to the efficient motor venting and ample voice coil the power handling is rated for 110-watts full range / 200-watts with a 70hz HPF filter with a respectable 89dB sensitivity. As with the SA-1T this is a 4th generation SA speaker due to the SA component set from prior generations. For this iteration we optimized it further and also created a new custom-tooled frame. The revised frame is more aerodynamics and also allows for superior coil ventilation. As with most Sundown products you will find a thick magnet-ID Faraday ring as well. Last, but absolutely not least, we have the SA-8M which takes linear stroke to yet another level. We were able to achieve 9mm one-way linear by 70% BL and nearly 10mm by CMS and LE standards. As with the 3M, the 8M features a pole sleeve and magnet ID faraday ring for LE treatment. This unit is an absolute powerhouse for mid-bass, and we believe it will make big waves in the SQ world. On the output side it has a 91.5dB sensitivity and will handle 130-watts full-range / 250-watts with a 70Hz HPF thanks to the efficient motor venting and huge 2" coil. The SA-8M is all-in on SQ and output potential – the Sundown way! Sold As A Pair Includes Metal Grille Built as Full Range with lot of low end extension 30W RMS 150W RMS @HPF 300hz+ Cutout: 3.1" Outer Diameter: 3.6" Depth: 1.91"
$199.99
-
Sundown Audio Xv.3 Series Drop-In Kit
These are standard drop-in recone kits ONLY. If you need a custom recone kit, you will still need to call us to place your order. There are no refunds or exchanges with drop-in re-cone kits. Please make sure you are ordering the correct model, version and impedance prior to ordering.
$209.99 - $304.99
-
Sundown Audio X-Series XV4 12" 3000W RMS Subwoofer
The Sundown Audio Xv4 12" Subwoofer is built for those who demand real power and precision in their sound system. Designed with premium Xv4 coils, this subwoofer delivers a massive 3000W RMS and 6000W peak power while maintaining outstanding clarity and control. With a durable, heavy-duty motor and optimized cooling system, the Xv4 ensures consistent performance even during extended play. Whether you’re upgrading your car audio or building a competition-level system, this subwoofer delivers thunderous low frequencies that stay tight and accurate. The precision-engineered cone and suspension system provide minimal distortion and maximum output. Pair it with a well-tuned ported enclosure for deep, room-shaking bass that brings your music to life. Built to handle extreme sound pressure, the Xv4 series continues Sundown Audio’s legacy of reliability, innovation, and unmatched performance. Key Features 12-inch subwoofer with Xv4 voice coils RMS Power: 3000W, Peak Power: 6000W Available in Dual 1Ω and Dual 2Ω versions High-efficiency motor structure with strong BL factor Optimized for ported enclosures (2.5 cu. ft @ 32Hz) Xmax: 30mm for deep excursion and accurate bass Reinforced cone for durability under extreme pressure Designed for audiophiles and SPL enthusiasts
$799.99
-
Sundown Audio Sundown Audio SA-69CX 6"x9" Coaxial Speakers
125 W RMS Silk dome tweeter Hybrid fiber cone Integrated crossover Cast aluminum frame Premium spring-loaded speaker terminals SPL: 91 Db Frequency range: 45Hz - 20KHz Sundown’s premiere sound quality separates, the SA-6.5CS is a marvel of design and top-tier components. The midrange features a high-quality cast aluminum basket, housing a cone with a carefully selected blend of paper and wool fibers. This design dampens any unwanted resonances for an incredibly smooth, detailed response. The surround is a high-compliance rubber, engineered to tame edge resonances within the cone. An FEA-optimized motor was designed in-house and features a full 6mm one-way linear excursion - thanks to a carefully designed motor and extended pole piece. To increase thermal performance, the SA midrange features a vented magnetic gap and vented voice coil collar. The SA series silk dome tweeter matches the smooth sound of the midrange. After extensive testing, Sundown optimized the tweeter’s gap, dome material, lens, and chamber damping material. The results speak for themselves. The SA separates were engineered for one, simple goal: to let you completely immerse yourself in the music. At any volume. For as long as you want.
$259.99
-
Sundown Audio SIA-1250D Full-Range Mono Amplifier
1,250 x 1 @ 1 ohm RMS 1,250 x 1 @ 2 ohms RMS 800 x 1 @ 4 ohms RMS Variable 12dB low pass filter: 40Hz-20kHz Variable 12dB high pass filter: 10Hz-1kHz Variable 12dB Bass Boost @ 50Hz Power, protection & clipping indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Advanced 3-speed fan design Subsonic filter Intelligent full bridge design Wired remote control with clipping indicator included Delivering the same power at 1 or 2 ohms, Sundown SIA Smart amplifiers are built with power and stability at their core. These full-bridge amplifiers feature a heavy heatsink for outstanding thermal management, while the three-speed Smart Cooling fan and advanced power supply design protects the amplifier from overheating and distorted output.
$299.99
-
Sundown Audio X-Series XV4 15" 3000W RMS Subwoofer
The Sundown Audio XV4 15″ Subwoofer delivers the ultimate low-frequency experience for serious bass lovers. Built with the advanced X v.4 coil design, this subwoofer offers extreme power handling and consistent performance under heavy loads. With up to 3000W RMS and 6000W peak power, it ensures clean, distortion-free sound even at the highest volumes. The durable motor structure and optimized cone area (72.58 in²) provide deeper lows and better air displacement for maximum sound pressure. Engineered for flexibility, the XV4 15″ works best in ported enclosures (4.25 cu ft, tuned to 32 Hz) but can also be customized for complex box designs like 4th order setups. Every element — from the high-grade magnet to the precision voice coil — is crafted to deliver unmatched performance and reliability. Perfect for audiophiles and competitors seeking solid bass impact, this subwoofer combines engineering excellence and raw power in one package. Key Features 15″ high-performance subwoofer with X v.4 coils 3000W RMS / 6000W peak power handling 30mm Xmax for strong linear excursion Optimized motor design (9.25″ diameter) Recommended ported box: 4.25 cu ft @ 32 Hz Robust cone design for high SPL output Ideal for competitive and high-end car audio systems
$849.99
-
AURRAS Demi-God DG-90.4 Class A/B 4-Channel Amplifier
110W x 4 RMS @ 4 ohms Stereo (14.4V) 165W x 4 RMS @ 2 ohms Stereo (14.4V) 330W x 2 RMS @ 4 ohms Bridged (14.4V) High-Efficiency Class A/B amplifier topology Highly flexible Low-Pass Filter (50Hz-500Hz / 500Hz-5000Hz) Highly flexible High-Pass Filter (50-500Hz / 500Hz-5000Hz) Dedicated Subsonic Filter: 10Hz-500Hz Outstanding Signal to Noise Ratio: 90dB Reliable, time-tested amplifier design for unmatched capability If there's one thing The Amp Lab knows, it's amplifiers! Since 2016, we have worked on thousands of amplifiers, and we've used that knowledge, along with our over 25 years of hands-on experience in the car audio installation profession, to bring you Aurras. Our goal with the Aurras Demi-God DG-90.4 is not to bring you the newest or most flashy amp on the market, but to deliver what we believe is the most reliable, capable, tested, and trusted amplifier design available! This high-performance Class A/B amplifier provides the clean power and full range of controls you need for incredible sound quality and dependable output. The Demi-God DG-90.4 utilizes an efficient and robust design, guaranteeing long-lasting durability and superior component stability. With an excellent Channel Separation of 60dB and a remarkably low T.H.D. of 0.035%, this amplifier ensures a clean, detailed, and dynamic soundstage. The wide input sensitivity and flexible crossover network allow for precise tuning, making it the perfect foundation for any serious car audio system upgrade. SPECIFICATIONS Model: AURRAS Demi-God DG-90.4 Class: Class A/B Input Sensitivity: 8V-200mV Signal to Noise Ratio: 90dB Low-Pass Filter: 50Hz-500Hz / 500Hz-5000Hz (x10) High-Pass Filter: 50-500Hz / 500Hz-5000Hz (x10) Subsonic Filter: 10Hz-500Hz Frequency Response: 15Hz-35KHz T.H.D. @ 4 ohm, 1KHz: 0.035% Efficiency @ 4 ohm, 100Hz: 90% Channel Separation: 60dB Operating Voltage: DC 10V-16V Recommended Fuse Rating: 40A x 2 Dimensions: 14.96" L x 9.45" W x 2.40" H Specification Details Continuous Power Output @14.4V / @12.8V - RMS Power, 4 ohms Stereo 110W × 4 / 90W × 4 - RMS Power, 2 ohms Stereo 165W × 4 / 125W × 4 - RMS Power, 4 ohms Bridged 330W × 2 / 250W × 2 Signal to Noise Ratio 90 dB Low Pass Frequency Crossover 50–500 Hz 500–5000 Hz (×10) High Pass Frequency Crossover 50–500 Hz 500–5000 Hz (×10) Subsonic Filter 10–500 Hz Frequency Response 15 Hz – 35 kHz (±1 dB) T.H.D Continuous @ 4 ohms, 1 kHz 0.04% Channel Separation 60 dB Input Sensitivity 8V – 200mV (±5%) Dimensions (mm) 240 (W) × 61 (H) × 380 (L) Operating Voltage DC 10V – 16V Recommended Fuse Rating 40A × 2
$399.99 $199.99
-
Sundown Audio Push Terminals
TERM-4G4AWG TERMINALTerminal - Standard 4awg, One woofer's worth (2 of each color)Zv.1, Zv.2, Zv.3NSv.1, NSv.2May Also be used on SA Classic to upgrade TERM-8SDTERMINAL FOR 8"Terminal - 8" Sundown, One woofer's worth (2 of each color)All 8" woofers excluding SML TERM-BLOCKSUNDOWN TERMINAL BLOCKTerminal Block - Sundown, One woofer's worth10" - 18" WoofersUv.1, Uv.2Mv.1Xv.1, Xv.2, Xv.3, Xv.4Zv.4, Zv.5, Zv.6, Zv.7NSv.3, NSv.4, NSv.5, NSv.6SDDNTEAMMay Also be used on SAv.2 to upgrade TERM-SABLOCKSA SERIES TERMINAL BLOCKTerminal Black - SA, One woofer's worthSA ClassicSAv.2
$2.20 - $4.70
-
Sundown Audio SFB-600D 600W Full Range Mono Amplifier
600 @ 1 ohms RMS 350 @ 2 ohms RMS 250 @ 4 ohms RMS Variable 12dB low pass filter: 80HZ – 20kHZ Variable 12dB high pass filter: 15HZ – 1kHZ Variable 12dB Bass Boost @ 50Hz 0-9dB Power, protection & clipping indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Wired remote control with clipping indicator The flexible SFB (Sundown Full Bridge) amplifiers pack a powerful punch in a compact size! Stable down to 1 ohm, the full-range SFB can be used as a subwoofer amp, or as an ideal power source for an array of P.A. speakers. If you are looking for raw power on a budget, look no further than the SFB Series from Sundown Audio.
$174.99
-
$19.99
-
Sundown Audio Z-Series Drop-In Kit
**Zv1, Zv2 and Zv3 Drop-In Kits must be called in to order.** These are standard drop-in recone kits ONLY. If you need a custom recone kit, you will still need to call us to place your order. There are no refunds or exchanges with drop-in re-cone kits. Please make sure you are ordering the correct model, version and impedance prior to ordering.
$214.99 - $329.99
