Monoblock (1-Channel)
-
AURRAS Demi-God DG-3000.1 MONO AMPLIFIER
1120W x 1 RMS @ 4 ohms Mono (14.4V) 2450W x 1 RMS @ 2 ohms Mono (14.4V) 4300W x 1 RMS @ 1 ohm Mono (14.4V) Linked Capable: Up to 8600W x 1 @ 2 ohms (14.4V) Precision variable Low-Pass Filter (30Hz-250Hz) Essential Subsonic Filter (10Hz-60Hz) Adjustable Bass Boost (0-12dB @ 45Hz) and Phase Control (0-180°) Exceptional Signal to Noise Ratio: 95dB for clean bass delivery If there's one thing The Amp Lab knows, it's amplifiers! Since 2016, we have worked on thousands of amplifiers, and we've used that knowledge, along with our over 25 years of hands-on experience in the car audio installation profession, to bring you Aurras. Our goal with the Aurras Demi-God DG-3000.1 is not to bring you the newest or most flashy amp on the market, but to deliver what we believe is the most reliable, capable, tested, and trusted amplifier design available! This high-power mono amplifier provides the massive, dependable output required for serious subwoofers while offering precise control over the crucial low-frequency range. The Demi-God DG-3000.1 is engineered for maximum performance and durability, featuring a robust circuit design capable of extreme power delivery, including Linked Operation for combining two units into a single colossal amplifier. Its highly efficient design, with 90% efficiency at 4 ohms, ensures maximum output with minimal wasted heat. Controls like the Subsonic Filter, Bass Boost, and Phase Control allow you to perfectly integrate your subwoofer system into your vehicle's acoustics for deep, impactful, and controlled bass. SPECIFICATIONS Rated Power Output: 3000W Input Sensitivity: 8V-200mV Signal to Noise Ratio: 95dB Low-Pass Filter: 30Hz-250Hz Subsonic Filter: 10Hz-60Hz Bass Boost (45Hz): 0-12dB Phase Control: 0-180° Frequency Response: 10Hz-350Hz T.H.D. @ 4 ohm, 100Hz: 0.15% Efficiency @ 4 ohm, 100Hz: 90% Operating Voltage: DC 12V-16V Recommended Fuse Rating: 300A (600A for Linked Operation) Dimensions: 22.05" L x 9.45" W x 2.40" H Specification Details Continuous Power Output @14.4V / @12.8V - RMS Power, 4 ohms Mono 1120W × 1CH / 1020W × 1CH - RMS Power, 2 ohms Mono 2450W × 1CH / 2200W × 1CH - RMS Power, 1 ohm Mono 4300W × 1CH / 3700W × 1CH - RMS Power, 4 ohms Linkable / Dual Mono 4900W × 1CH / 4400W × 1CH - RMS Power, 2 ohms Linkable / Dual Mono 8600W × 1CH / 7400W × 1CH Signal to Noise Ratio 95 dB Low Pass Frequency Crossover 30 Hz – 250 Hz Subsonic Filter 10 Hz – 60 Hz Bass Boost @ 45Hz 0 – 12 dB Phase Shift Control 0 – 180° Frequency Response 10 Hz – 350 Hz (±1 dB) T.H.D Continuous @ 4 ohms, 100Hz 0.15% Efficiency @ 4 ohms, 100Hz 90% Input Sensitivity 8V – 200mV (±5%) Dimensions (mm) 240 (W) × 61 (H) × 560 (L) Operating Voltage DC 12V – 16V Recommended Fuse Rating 300A (Linked: 600A)
$549.99 $399.99
-
Kicker Kicker 46CXA18001T 1800W CX Series Mono Block Class D Car Audio Amplifier/Amp CX
CX1800.1 Mono Amplifier CX-Series Amps reach massive power levels thanks to an optimized circuit layout and the highest-grade internal components. Highly efficient heat sinks keep the amp cool with a sophisticated new look. Mono amps offer an optional remote level control to adjust your bass right from the dash. Power Station The CXA1800.1 Mono Amplifier is built for big bass in a sleek, yet affordable package. Using a Class-D power plant and FIT+™ (Fail-safe Integration Technology-PLUS) for superior dependability, this amp features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump with a simple turn of the optional CXARC Remote Bass Controller. CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time! A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. Use the full range outputs to expand your system with other bass amps, or add a full range amp to complete your system. This CX-Series Amplifier delivers as much as 1,800 watts into one bass channel. See below for more details. Efficient Class-D amplifier Three-second turn-on/off delay to eliminate unwanted interference Variable 12dB crossovers provides control to dial in perfect sound KickEQ™ 6dB variable bass boost for those additional low frequencies 24dB subsonic filter for protection from potentially damaging frequencies FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio Accepts up to 40-volt input signal Small footprint for easier installation Compatible with CXARC Remote Bass Control Vertical mounting hardware included for another unique look Specifications MODEL CXA1800.1 Power (watts/ch) 4 Ohm 900x1 Power (watts/ch) 2 Ohm 1800x1 Power (watts/ch) 1 Ohm 1800x1 +/-10% CXRC Remote Bass Capable (sold sep.) yes Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) 14-3/8, 36.4 Frequency Response (Hz): 25-200Hz Input Sensitivity: 250mV-10V (Low Level)1V-40V (High Level) Signal-to-Noise Ratio: 95dB Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave Subsonic Filter: 25Hz @24dB/octave KickEQ™ Boost Variable 0-6dB @40Hz
$549.99 $499.99
-
Down4Sound Down4Sound JP8 | 800W RMS Monoblock Amplifier
JP8 AMP: 800W PLUS RMS MONOBLOCK Amplifier RMS power, 1ohm : 700W x 1 @ 12v | 850W x 1 @ 14.4v RMS power, 2ohms: 500W x 1 @ 12v |650W x 1 @ 14.4v RMS power, 4ohms : 490W x 1 @ 12v RMS power, 2ohm Linked: 2300W x 1 - 14.4v Frequency Response: 10 Hz - 270 Hz Low Pass Filter: 35 Hz - 250 Hz Subsonic Filter: 10 Hz - 50 Hz Bass Boost: 0 - 9 Db Input sensitivity: 6V - 0.2V signal to Noise Ratio: 97dB < T.H.D @ 4ohm: less than 0.1% Single unit fuse rating: 120A Strapped fuse rating 220A Length (inches) Width x height (inches):11.81" x 7.4"W 2.24" H Damping Factor: 100 8 GA input for Speaker Wire 4 GA input on Power Wire
$199.99
-
Sundown Audio SIA-1250D Full-Range Mono Amplifier
1,250 x 1 @ 1 ohm RMS 1,250 x 1 @ 2 ohms RMS 800 x 1 @ 4 ohms RMS Variable 12dB low pass filter: 40Hz-20kHz Variable 12dB high pass filter: 10Hz-1kHz Variable 12dB Bass Boost @ 50Hz Power, protection & clipping indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Advanced 3-speed fan design Subsonic filter Intelligent full bridge design Wired remote control with clipping indicator included Delivering the same power at 1 or 2 ohms, Sundown SIA Smart amplifiers are built with power and stability at their core. These full-bridge amplifiers feature a heavy heatsink for outstanding thermal management, while the three-speed Smart Cooling fan and advanced power supply design protects the amplifier from overheating and distorted output.
$299.99
-
Sundown Audio Sundown Audio SALT-3 3000W Class D Amplifier
6,000 x 1 @ 2 ohms RMS (when linked) 3,000 x 1 @ 1 ohms RMS mono 1,500 x 1 @ 2 ohms RMS mono 750 x 1 @ 4 ohms RMS mono 24dB variable subsonic filter: 10HZ - 50HZ 24dB variable low pass filter: 35HZ - 250HZ Frequency Response : 10 Hz – 250 HZ Variable bass boost @ 45Hz 0-9dB Phase shift control 0-180 degrees Power, clipping and protection indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Included wired remote control displays voltage, temperature, and clipping Feel the power of the Sundown SALT-3! This strappable amp delivers a massive 6,000 watts at 2 ohms when attached to another SALT-3, or pump out 3,000 watts at 1 ohm on its own. The amp features both a 24dB variable subsonic and low pass filter, along with a bass boost at 45Hz, letting you dial in your personal, perfect sound. The phase shift control makes it easy to precisely adjust the output. With onboard indicators for power, clipping, and protection you’ll have full control over your setup. Use the included wired remote control to see voltage, temperature, and clipping at a glance. Producing optimum power at realistic voltages (the 12s, rather than needing 14+ volts), the SALT – Sundown Audio Low-Voltage Technology – is Sundown’s answer! SALT amplifiers represent the pinnacle of Korean Class-D amplifier technology. Whether you are a world-class SPL competitor or simply want to bang harder than absolutely anyone else, the SALT series will be right at home in your system. Specifications Input Sensitivity : 6V - 0.2V Efficiency : 90% < Signal / Noise Ratio : 90DB < Damping Factor : 400 < Tested Voltage & THD : 12.8V & Less Than 1% THD Operation Voltage : DC 9V - 15.5V Power Input Recommended Fuse : 300 Amps Dimensions : 19.68” L x 8.67” W x 2.80” H
$1,199.99
-
Ampere Audio Ampere Audio AA-12K Mono Block Car Audio Amplifier
Ampere Audio AA-12K | 12,000W Class D Mono Block Amplifier Power. Precision. Domination.Meet the AA-12K — Ampere Audio’s flagship digital monoblock amplifier built for those who demand nothing less than total control and raw output. Whether you’re competing, demoing, or just living loud, the AA-12K delivers uncompromising performance with brutal force and unwavering clarity. Designed with hardcore bassheads and audiophiles in mind, this beast pushes up to 12,000 watts RMS at 1 ohm — and a staggering 24,000 watts when strapped. Built with advanced Class D technology, a dual MOSFET PWM power supply, and elite-grade efficiency, the AA-12K is engineered to dominate the lanes, flex hard in demos, and outperform anything in its class. But this amp isn’t just about brute strength — it’s also about smart control. With a wired remote that displays voltage, temperature, and clipping, plus independent crossovers and adjustable phase, the AA-12K gives you precise command over your soundstage. This is power that listens. Technical Specifications: Power Output (RMS @ 14.4V): 1 Ohm Mono: 12,000W 2 Ohm Mono: 7,000W 4 Ohm Mono: 4,000W 2 Ohm Strapped (Linked): 24,000W General: Class D Digital Monoblock Design Dual MOSFET PWM Power Supply Efficiency: > 97% (at 4 Ohms) Input Sensitivity: 6V – 0.2V Frequency Response: 15Hz – 264Hz Signal-to-Noise Ratio: 91 dB Damping Factor: > 400 THD: < 0.1% Working Voltage: 9V – 16.5V Controls & Filters: Low Pass Filter: 35Hz – 250Hz (24 dB/Oct) Subsonic Filter: 10Hz – 50Hz (24 dB/Oct) Bass Boost: 0 – 9 dB @ 45Hz Phase Shift: 0 – 180° Connectivity & Extras: RCA Inputs/Outputs (for Master/Slave Linking) Wired Remote Control with: Voltage Display Temperature Display Clipping Indicator Protection Features: Thermal Voltage Speaker Short DC Offset Fuse Rating: 1000A (External – not built-in) Dimensions: 27.55" (L) x 11.82" (W) x 3.06" (H)
$1,899.99
-
Down4Sound Down4Sound JP63 | 6300 WATT RMS Class D Amplifier
JP 63 Amplifier: 6300W PLUS RMS MONOBLOCK Amplifier We introduce the JP-63 , the 6300 WATT RMS (PLUS WAY more if you have a solid electrical) monoblock amplifier. It's like an 6k (6000 WATT) amplifier just with WAY more power. This 6000 watt amp is great for a serious basshead looking to bang some monterous , storm stomping bass out of their subwoofer.. REMEMBER, This isn't your typical 6000 WATT plus amplifier, we upgraded the input to 3 power and grounds, added the best RCA's true tiffany, the internal fan now stays on as soon as you turn on the amplifier to keep it cooler longer. The color is Clearwater Turquoise. This 6000 plus watt amplifier MUST HAVE an ELECTRICAL UPGRADED INSTALLED, OR NO WARRANTY. THIS MEANS YOU NEED A BIG 3, UPGRADED ALT, AND RESERVE BATTERY(s) to support this amplifier and any others you may have in your setup. If you do not have the proper electrical before installing this amplifier, you will not have a warranty. Our Ratings on Power for the JP63: 1-ohm rating: 6300 WATTS RMS 2-ohm rating: 4300 WATTS RMS 4-ohm rating: 2300 WATTS RMS Other Specifications on the JP63: Frequency response : 14Hz –269Hz Signal to noise : 91dB Damping factor : 480 < Efficiency at 4ohm : 97% Input sensitivity : 6V –0.2V Subsonic filter : 10Hz –50Hz Low pass filter : 35Hz –250Hz Phase : 0 –180 degree Strappable connection Working to half ohm in speaker connection Clipping indicator Fusing: 700A TOTAL | 250A for each positive wire (3x) BT Remote control with Voltage and Temperature display, Clipping indicator. C type power connection for BT remote 4 ga speaker output 3 x 0ga power inputs Operating voltage : 9 to 16 Volts. Dimensions : 19.68 INCHES (L) x 9.37 INCHES (W) x 2.64 INCHES (H) MADE IN SOUTH KOREA
$999.99
-
Sundown Audio SIA-1750D Full-Range Mono Amplifier
1,750 x 1 @ 1 ohm RMS 1,750 x 1 @ 2 ohms RMS 1,250 x 1 @ 4 ohms RMS Variable 12dB low pass filter: 40Hz-20kHz Variable 12dB high pass filter: 10Hz-1kHz Variable 12dB Bass Boost @ 50Hz Power, protection & clipping indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Advanced 3-speed fan design Subsonic filter Intelligent full bridge design Wired remote control with clipping indicator included Delivering the same power at 1 or 2 ohms, Sundown SIA Smart amplifiers are built with power and stability at their core. These full-bridge amplifiers feature a heavy heatsink for outstanding thermal management, while the three-speed Smart Cooling fan and advanced power supply design protects the amplifier from overheating and distorted output.
$369.99
-
DC Audio DC Audio A3 1.2K 1200 Watt Mono Block Car Audio Class D Amplifier/Amp+Bass Knob
The 1.2kw competition series amplifier is a 1,200 watt mono block. It is capable of running up to 16 volts for up to1,450 watts. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped. It comes with a bass knob. For power inputs it will accept 4 awg for power and 4 awg for ground. Features Voltage 1.2kw Output Power (RMS) 4 ohm 14.4V 350Wx1 2 ohm 14.4V 700Wx1 1 ohm 14.4V 1,200Wx1 1 ohm 16V 1,450Wx1 1 ohm 18V No Input Sensitivity 6V~0.2V Low high Filter Switchable ( @ 24 dB Slope) Variable Hz 35~250 Subsonic Filter Switchable ( @ 24 dB Slope) Variable Hz 10~50 Bass Boost Variable dB 0-9dB Frequency Response Hz 15-270 Signal to Noise Ratio dB 100 Damping factor 100< Efficiency @ 4ohm % 81% THD @ 4ohms Less than 0.1% Fuse Rating 120 Amps Indicator Power Yes Protection Yes Clip No Speaker & Power terminal Mold Type Yes Power Gauge 4Ga Heatsink Length 16.5" (419mm) Heatsink Width 9.38" (238mm) Heatsink Height 2.35" (59.6mm) Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Variable bass boost • Wired remote control
$449.99 $314.99
-
Sundown Audio Sundown Audio SALT-8 Competition Class D Amplifier
16,000 x 1 @ 2 ohms RMS (when linked) 8,000 x 1 @ 1 ohms RMS mono 4,000 x 1 @ 2 ohms RMS mono 2,000 x 1 @ 4 ohms RMS mono Frequency Response : 10 Hz – 250 HZ 24dB variable subsonic filter: 10HZ - 50HZ 24dB variable low pass filter: 35HZ - 250HZ Variable bass boost @ 45Hz 0-9dB Phase shift control 0-180 degrees Power, clipping & protection indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Included wired remote control displays voltage, temperature, and clipping Producing optimum power at realistic voltages (the 12s, rather than needing 14+ volts), the SALT – Sundown Audio Low-Voltage Technology – is Sundown’s answer! SALT amplifiers represent the pinnacle of Korean Class-D amplifier technology. Whether you are a world-class SPL competitor or simply want to bang harder than absolutely anyone else, the SALT series will be right at home in your system.
$2,199.99
-
Sundown Audio Sundown Audio SALT-6 Competition Class D Amplifier
12,000 x 1 @ 2 ohms RMS (when linked) 6,000 x 1 @ 1 ohms RMS mono 3,000 x 1 @ 2 ohms RMS mono 1,500 x 1 @ 4 ohms RMS mono Frequency Response : 10 Hz – 250 HZ 24dB variable subsonic filter: 10HZ - 50HZ 24dB variable low pass filter: 35HZ - 250HZ Variable bass boost @ 45Hz 0-9dB Phase shift control 0-180 degrees Power, clipping & protection indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Included wired remote control displays voltage, temperature, and clipping Feel the power of the Sundown SALT-6! This strappable amp delivers a massive 12,000 watts at 2 ohms when linked to another SALT-6, or pump out 6,000 watts at 1 ohm on its own. The amp features both a 24dB variable subsonic and low pass filter, along with a bass boost at 45Hz, letting you dial in your personal, perfect sound. The phase shift control makes it easy to precisely adjust the output. With onboard indicators for power, clipping, and protection you’ll have full control over your setup. Use the included wired remote control to see voltage, temperature, and clipping at a glance. Producing optimum power at realistic voltages (the 12s, rather than needing 14+ volts), the SALT – Sundown Audio Low-Voltage Technology – is Sundown’s answer! SALT amplifiers represent the pinnacle of Korean Class-D amplifier technology. Whether you are a world-class SPL competitor or simply want to bang harder than absolutely anyone else, the SALT series will be right at home in your system.
$1,899.99
-
DC Audio DC Audio A3 2.0K 2000 Watt Mono Block Car Audio Class D Amplifier/Amp+Bass Knob
The 2.0kw competition series amplifier is a 2,000 watt mono block. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped. It comes with a bass knob and a clipping indicator. For power inputs it will accept 0 awg for power and 0 awg for ground. Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Variable bass boost • Wired remote control • Clipping indicator We recommend for installation • 1 upgraded battery under the hood • 1 extra battery in the rear • Minimum of one 0 awg ran from the front battery to the rear battery • Upgraded aftermarket alternator • Dash mounted voltage meter Specifications Features Voltage 2.0kw Output Power (RMS) 4 ohm 14.4V 600W x 1 2 ohm 1,200W x 1 1 ohm 2,000W x 1 1 ohm 16V No 1 ohm 18V No Input Sensitivity 6V~0.2V Low Pass Filter Switchable ( @ 24 dB Slope) Variable Hz 35~250 Subsonic Filter Switchable ( @ 24dB slope ) Variable Hz 10~50 Bass Boost Variable dB 0-9dB Frequency Response Hz 15-270 Signal to Noise Ratio dB 100 Damping factor 150< Efficiency @ 4ohm % Over 90% THD @ 4ohms Less than 0.1% Fuse Rating 200 Amps Linked Fuse Rating 400 Amps Indicator Power Yes Protection Yes Clip Yes Speaker & Power terminal Mold Type Yes Power Gauge 0Ga Heatsink Length inch/mm 17.72" / 450mm Heatsink Width inch/mm 9.38"/238mm Heatsink Height inch/mm 2.35"/59.6mm Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Variable bass boost • Wired remote control • Clipping indicator
$858.00 $674.99
-
STETSOM BRAVO BASS FLEX 3K DIGITAL SUBWOOFER AMPLIFIER
Versatile Power for BASS and SUB BASS The Stetsom BRAVO BASS FLEX 3K is engineered for automotive sound enthusiasts who demand both high performance and exceptional versatility. Its defining feature is the FLEX Automatic Impedance System, which intelligently adjusts the amplifier’s output impedance from 0.5 Ohm up to 2 Ohms to match the connected speakers. This optimization maximizes efficiency and power output, making speaker configuration simpler and ensuring high-quality audio reproduction. Delivering up to 3500W RMS (at 1 Ohm), the amplifier is built exclusively for powerful BASS and SUB BASS frequencies, with a response of 5Hz to 200Hz. It includes built-in EQ controls (Subsonic Filter, Low Pass Filter, and Bass Boost) for precision tuning, along with Smart and Silent Coolers and a robust Smart Protection System for reliable, long-term performance. Key Features & Audio Controls FLEX Automatic Impedance System: Automatically adjusts the output for optimal power delivery across a wide range of load impedances (0.5 Ohm to 2 Ohms). Precision Filtering: Features a variable Subsonic Filter (5Hz to 40Hz) to protect speakers and a variable Low Pass Filter (30Hz to 200Hz) for seamless system integration. Adjustable Bass Boost: Offers up to +10dB of boost at a selectable frequency, allowing for customized bass punch. System Integration: Includes In/Out Audio RCA for chaining the signal to other amplifiers and a Smart Protection System with LED diagnosis. Durable Terminals: Supports up to 4 AWG for power/ground and 7 AWG for speaker connectors (for 0.5 Ohm load) for stable, high-current operation. Technical Specifications Specification Detail Minimum Output Impedance 0.5 OHM ~ 2 OHMS (AUTO) Number of Channels 1 RMS Power 3000W RMS Power at 0.5 Ohm (14.4V) 3000W RMS Power at 1 Ohm (14.4V) 3500W RMS Power at 2 Ohm (14.4V) 3000W Supply Voltage 9V ~ 17V DC Frequency Response 5Hz ~ 200Hz Crossover Low Pass (LPF) 30Hz ~ 200Hz (Variable) Crossover Subsonic Filter (HPF) 5Hz ~ 40Hz (Variable) Bass Boost 0dB ~ +10dB (30Hz ~ 70Hz selectable) Signal to Noise >90dB Input Sensitivity 0.2V ~ 3V Input Impedance 7K Ohms Musical Consumption 160A BASS Consumption 320A Dimensions (H x W x D) mm 80 x 236 x 231.5 mm Weight Kg 3 Kg (6.6 lbs)
$356.99 $339.99
-
Kicker Kicker 51LX30001 3000W Car Audio Mono-block Class D Amplifier/Amp
LX Amplifiers LX-Series Amplifiers is KICKER’s premium amp line designed in-house from the ground up, featuring up to 3,800 watts of dynamic power. What You Can Expect Engineered in the USA, LX can effortlessly serve the needs of car-audio systems that require premium amplification, high power, system design flexibility, DSP-powered features, and the ability to monitor and control it all remotely. It’s the perfect marriage of SQL design and high-powered output. Eliminate Unwanted Noise All seven models utilize FIT+™ (Fail-safe Integration Technology-PLUS), accepting low- and high-level signals up to 40V, with full differential inputs created to eliminate noise that would ruin your sound. All feature the choice of turn-on mode and comprehensive protections for thermal, circuit, and voltage stability, ensuring reliable performance. For the Bass LX features a choice of four very efficient, compact, high-power monoblock amps ranging from 850 to 3000 watts all 1-Ohm stable, with a chassis less than nine inches deep and about a foot or less wide. They’re very easy to install in any application. All-In-One Power Tool We got those too! A full-range, 4-channel amplifier, a 5-channel multi-channel hybrid with subwoofer section, and an innovative 7-channel multi-channel hybrid with sub section complete the lineup. LXRC with Models that Make Bass Six amps with mono channels come with the LXRC (LX Remote Control), giving you dynamic fingertip dash direction of bass level. It features SHOCwave2.0™ (Sub-Harmonic Octave Creation), KICKER’s 2nd-gen digital bass restoration algorithm that recovers lost, low-bass frequencies vital to your music selections. It also displays battery voltage in a fuel-gauge-style readout, control of its RGB LED brightness, and output clipping indication. Specifications LX 3000.1 white paper 51LX30001 Whitepaper PDF RMS Power [Watts Channel] @ 14.4V 1Ω mono: 3000W2Ω mono: 2000W4Ω mono: 1100W Dynamic Power [Watts] 3800 Frequency Response [Hz] 10–160, +0/–1dB Signal-to-Noise Ratio(a-weighted, re: rated power) >95dB Signal-to-Noise Ratio(ref: 1W output) >75dB Dimensions [in, cm] Height: 2-3/8 (6 cm) Width: 8-7/16 (21.4 cm)Length: 12-5/8 (32 cm) Input Sensitivity High level 1V–40VLow level 125mV–5V Variable Electronic Crossover LP; 24dB/octave Linkwitz-Riley,variable 40–160Hz Variable Subsonic Filter 24dB/octave Linkwitz-Riley,variable hi-pass @ 10–80Hz KickEQ+™ Parametric Bass Boost 0–6dB, variable center 20–80Hz,variable bandwidth 1–5 Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.
$999.99 $899.99
-
Sundown Audio Sundown Audio SAEv4-600.1D Mono Amplifier
600 x 1 @ 1 ohms RMS 450 x 1 @ 2 ohms RMS 250 x 1 @ 4 ohms RMS Class D amplifier 12dB variable low pass filter: 40Hz - 180Hz 12dB subsonic filter: 10Hz – 40Hz Phase shift control 0-180 degrees Power, clipping & protection indicators included Heavy aluminum heat sink for improved thermal control Thermal, voltage, speaker short, and dc-offset protection circuitry Wired remote control with clipping indicator The Sundown Audio SAEv4-600D is a simple, powerful upgrade for any car audio enthusiast seeking superior sound quality and reliability. This high-performance half-bridge class D amplifier ensures powerful, detailed output. The variable phase, lowpass, and subsonic filters provide the control you need - for the sound you love. Featuring robust protection circuitry against thermal, voltage, speaker short, and DC-offset issues, along with power and protection indicators, this amplifier guarantees long-lasting durability, while the heavy aluminum heat sink enhances thermal control, preventing overheating during extended use. The included wired remote with clipping indicator provides real-time monitoring and output control!
$299.99
-
Sundown Audio SIA-8000D Full-Range Mono Amplifier
8,000 x 1 @ 1 ohm RMS 7,700 x 1 @ 2 ohms RMS 5,600 x 1 @ 4 ohms RMS Variable 12dB low pass filter: 40Hz-20kHz Variable 12dB high pass filter: 10Hz-1kHz Variable 12dB Bass Boost @ 50Hz Power, protection & clipping indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Advanced 3-speed fan design Subsonic filter Intelligent full bridge design Wired remote control with clipping indicator included Delivering tremendous power at 1, 2, or 4 ohms, the Sundown SIA amps are built with power and stability at their core. These full-bridge amplifiers feature a heavy heatsink for outstanding thermal management, while the three-speed Smart Cooling fan and advanced power supply design protects the amplifier from overheating and distorted output. Made to bang all day long, by the world champions of bass!
$999.99
-
Sundown Audio Sundown Audio SALT-2 Class D Amplifier
4,000 x 1 @ 2 ohms RMS (when linked) 2,000 x 1 @ 1 ohms RMS mono 1,000 x 1 @ 2 ohms RMS mono 500 x 1 @ 4 ohms RMS mono Frequency Response : 10 Hz – 250 HZ Digital Class-D Linkable Mono Block Amplifier Variable bass boost @ 45Hz 0-9dB 24dB variable subsonic filter: 10HZ - 50HZ 24dB variable low pass filter: 35HZ - 250HZ Phase shift control 0-180 degrees Power, clipping & protection indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Included wired remote control displays voltage, temperature, and clipping Feel the power of the Sundown SALT-2! This strappable amp delivers a massive 4,000 watts at 2 ohms when attached to another SALT-2, or pump out 2,000 watts at 1 ohm on its own. Producing optimum power at realistic voltages (the 12s, rather than needing 14+ volts), the SALT – Sundown Audio Low-Voltage Technology – is Sundown’s answer! SALT amplifiers represent the pinnacle of Korean Class-D amplifier technology. Whether you are a world-class SPL competitor or simply want to bang harder than absolutely anyone else, the SALT series will be right at home in your system.
$849.99
-
DC Audio DC Audio A3 3.5K 3500 Watt Mono Block Car Audio Class D Amplifier/Amp+Bass Knob
The 3.5kw competition series amplifier is a 3,500 watt mono block. It is capable of running up to 18 volts for up to 5,100 watts. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped. It comes with a bass knob and a clipping indicator. For power inputs it will accept 0 awg for power and 0 awg for ground. Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Variable bass boost • Wired remote control • Clipping indicator We recommend for installation • 1 upgraded battery under the hood • 1 extra battery in the rear • Minimum of one 0 awg ran from the front battery to the rear battery • Upgraded aftermarket alternator • Dash mounted voltage meter Specifications Features Voltage 3.5kw Output Power (RMS) 4 ohm 14.4V 750W x 1 2 ohm 1,800W x 1 1 ohm 3,500W x 1 1 ohm 16V 4,000W x 1 1 ohm 18V 5,100Wx1 Input Sensitivity 6V~0.2V Low Pass Filter Switchable ( @ 24 dB Slope) Variable Hz 35~250 Subsonic Filter Switchable ( @ 24dB slope ) Variable Hz 10~50 Bass Boost Variable dB 0-9dB Frequency Response Hz 15-270 Signal to Noise Ratio dB 100 Damping factor 150< Efficiency @ 4ohm % Over 90% THD @ 4ohms Less than 0.1% Fuse Rating 300 Amps Linked Fuse Rating 600 Amps Indicator Power Yes Protection Yes Clip Yes Speaker & Power terminal Mold Type Yes Power Gauge 0Ga Heatsink Length inch/mm 21.26"/540mm Heatsink Width inch/mm 9.38"/238mm Heatsink Height inch/mm 2.35"/59.6mm Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Variable bass boost • Wired remote control • Clipping indicator
$1,386.00 $1,099.99
-
Stetsom BRAVO BASS Flex 8K Mono Class D Car Audio Amplifier
The Stetsom BRAVO BASS Flex 8K is a mono, Class D car audio amplifier featuring an Automatic Impedance System (FLEX) that adjusts its output impedance from 0.5 Ohm to 1 Ohm. It is designed for high-performance BASS and SUB BASS applications. The Bravo Bass Line amplifier is a powerful and high-quality car audio amplifier that delivers an impressive 8000 watts RMS output, designed exclusively for BASS and SUB BASS performance. It features the advanced FLEX – Automatic Impedance System, which intelligently adjusts the amplifier’s impedance from 0.5 to 1 Ohm according to the needs of the connected speakers, ensuring optimal performance and system stability in every setup. To maintain efficient and silent operation, the amplifier is equipped with Smart and Silent Coolers that provide excellent heat dissipation while minimizing noise, allowing the system to perform reliably even under heavy loads. The In/Out Audio RCA connections make it possible to link the amplifier with another unit, offering flexible system expansion for more powerful configurations. Additionally, it supports up to 7 AWG speaker connectors and up to 00 AWG double power and double ground connectors, ensuring strong and stable current flow for consistent output performance. Compact, elegant, and built for automotive sound enthusiasts, the Bravo Bass Line amplifier combines a stylish design with maximum performance in bass and sub-bass reproduction. It fits easily into any car audio setup, delivering deep, clean, and controlled low frequencies that elevate the entire listening experience. Technical Specifications Specification Detail Minimum Output Impedance 0.5 OHM ~ 1 OHM (AUTO) Number of Channels 1 RMS Power @ 14.4V (Output Varies by Auto-Impedance) 8,800W RMS @ 0.5 Ohm 9,000W RMS @ 0.67 Ohm 8,700W RMS @ 0.80 Ohm 9,000W RMS @ 1 Ohm Supply Voltage 9V ~ 17V DC Frequency Response (-3dB) 5Hz ~ 200Hz Crossover Low Pass (LPF) 30Hz ~ 200Hz (Variable) Crossover Subsonic Filter 5Hz ~ 40Hz (Variable) Bass Boost 0dB ~ +10dB (30Hz ~ 70Hz selectable frequency) Signal to Noise Ratio >90 dB Input Sensitivity 0.2V ~ 6V Input Impedance 55K Ohms Musical Consumption 390A BASS Consumption 780A Dimensions (H x W x L) 3.1" x 9.1" x 19.4" Weight 15.6 lb (7.10 Kg) Quantity of Speakers Speaker Impedance Resultant Impedance 2 x speakers 1 OHM 0.5 OHM 4 x speakers 2 OHMS 0.5 OHM 3 x speakers 2 OHMS 0.66 OHM 2 x speakers 2 OHMS 1 OHM 4 x speakers 4 OHMS 1 OHM
$781.99
-
STETSOM BRAVO BASS 8K Mono 1-Channel Class D - 8000 Watts DIGITAL SUBWOOFER AMPLIFIER
Unrivaled Power for Competition Bass The Stetsom BRAVO BASS 8K is the definitive choice for the extreme automotive sound enthusiast, developed for unrivaled performance in BASS and SUB BASS applications. This Class D Mono Amplifier outputs an earth-shattering 8200 Watts RMS at 1 Ohm (14.4V), providing the massive energy required to drive the most demanding subwoofer setups. Engineered for precision and impact, its optimized frequency response spans from 5Hz to 600Hz (Flat ON), ensuring powerful, clean bass that sets a new standard for low-frequency definition. The BRAVO BASS 8K includes a complete suite of professional audio controls, including variable Low Pass and Subsonic Filters, plus a versatile Bass Boost, giving you the ability to fine-tune your system for competition, daily driving, or simply maximum SPL. Despite its colossal power, it maintains a high Signal-to-Noise Ratio (> 90dB) and features a robust Smart Protection System for reliable, high-performance operation. Advanced Control & Competition Features Customizable Bass Impact: The BASS BOOST function offers variable gain from 0dB to +10dB at a selectable frequency between 30Hz and 70Hz to maximize low-end punch. Precision Filtering: Utilize the Low Pass Filter (30Hz ~ 250Hz) and the critical Subsonic Filter (5Hz ~ 40Hz) to protect your subwoofers and prevent reproduction of damaging frequencies. FLAT Mode Switch: Quickly bypass all Crossover and BASS BOOST settings for full-range (up to 600Hz) signal reproduction when desired. Reliability & Protection: Equipped with multiple COOLERs for efficient heat management and a Smart Protection System that monitors for faults like short circuits, overheating, and voltage fluctuations (indicated by the PROT LED). Wiring Recommendation: Due to the extreme power consumption, the use of 00 AWG or larger cables for power and ground connections is strongly recommended for optimal performance and safety. TECHNICAL SPECIFICATIONS CHARACTERISTIC Detail Number of Channels 1 RMS Power @ 1 Ohm (14.4V) 8200W RMS Power @ 2 Ohm (14.4V) 4900W Supply Voltage 9V ~ 17V DC Frequency Response (-3dB) FLAT ON 5Hz ~ 600Hz Frequency Response (-3dB) FLAT OFF 5Hz ~ 250Hz Crossover Low Pass (LPF) 30Hz ~ 250Hz (Variable) Crossover Subsonic Filter 5Hz ~ 40Hz (Variable) Bass Boost $0\text{dB} \sim +10\text{dB}$ (30Hz ~ 70Hz) Signal to Noise >90 dB Input Impedance 4.8K Ohms Musical Consumption 365A BASS Consumption 730A Dimensions (H x W x L) 3.14" x 9.11" x 16.49" Weight 13.22 lbs
$737.99
-
STETSOM BRAVO BASS 3K DIGITAL SUBWOOFER AMPLIFIER
Performance Focused on BASS and SUB BASS The Stetsom BRAVO BASS 3K is engineered for automotive sound lovers demanding maximum performance in BASS and SUB BASS frequencies. This Class D Mono Amplifier delivers a powerful 3000 Watts RMS at 1 Ohm (14.4V), providing the massive low-frequency power required for competition-level sound systems. Its exceptional frequency response, optimized from 8Hz to 600Hz (when FLAT mode is active), ensures powerful bass with clarity and definition for use with subwoofers and woofers. The unit features sophisticated audio controls, including a variable Subsonic Filter and a customizable Bass Boost, allowing for precision tuning and maximum speaker protection. Built with a compact design, the BRAVO BASS 3K offers high efficiency and a reliable Smart Protection System for long-lasting, high-impact performance. Key Features & Audio Controls Precision Crossover: Includes both a Low Pass Filter (30Hz ~ 250Hz) and a Subsonic Filter (8Hz ~ 40Hz) to perfectly match the amplifier to your subwoofers and protect them from damaging ultra-low frequencies. Customizable Bass: The BASS BOOST function offers variable gain from 0dB to +10dB at a selectable frequency between 30Hz and 70Hz, allowing you to dial in your preferred bass impact. FLAT Mode Switch: A convenient switch to instantly bypass all Crossover and BASS BOOST settings for quick configuration or maximum frequency output. Advanced Protection: Features a PROT (Protection) LED and a CLIP LED for quick diagnosis, monitoring for faults like overheating, short circuits, and signal saturation. Optimized Connections: Recommended wiring includes minimum 4 AWG for power and 8 AWG for speaker output (for 1 ohm load), ensuring maximum power transfer and safety. TECHNICAL SPECIFICATIONS CHARACTERISTIC Detail Number of Channels 1 RMS Power @ 1 Ohm (14.4V) 3000W RMS Power @ 2 Ohm (14.4V) 1800W Minimum Output Impedance 1 Ohm Supply Voltage 9V ~ 17V DC Frequency Response (-3dB) FLAT ON 8Hz ~ 600Hz Frequency Response (-3dB) FLAT OFF 8Hz ~ 250Hz Crossover Low Pass (LPF) 30Hz ~ 250Hz (Variable) Crossover Subsonic Filter 8Hz ~ 40Hz (Variable) Bass Boost 0 +10{dB} (30Hz ~ 70Hz) Signal to Noise >90 dB Input Sensitivity 200mV Input Impedance 5K Ohms Musical Consumption 132A BASS Consumption 265A Dimensions (H x W x L) 3.14" x 9.11" x 9.29" Weight 6.3 lbs
$344.99
-
Stetsom BRAVO BASS 5K Mono 1 Channel Class D Digital Subwoofer Amplifier
Massive Power & Precision Bass The Stetsom BRAVO BASS 5K is engineered specifically for automotive sound enthusiasts who demand maximum performance in BASS and SUB BASS. This Class D Mono Amplifier delivers a staggering 5200 Watts RMS at $1 \text{ Ohm}$ $(14.4\text{V})$, ensuring your subwoofers hit those deep, thunderous lows with unmatched power and clarity. With an optimized frequency response of $5\text{Hz}$ to $600\text{Hz}$ (when FLAT mode is ON), this amp provides powerful bass with exceptional definition. It offers advanced control features including a fully adjustable Low Pass Crossover, a precision Subsonic Filter, and a customizable Bass Boost to fine-tune your sound to competition standards. The amp also features a Smart Protection System and dedicated COOLERs to maintain optimal temperature and reliability under intense use. Advanced Control & Reliability Features Bass Boost Control: Variable control for increasing bass from 0dB to +10dB, with frequency selection from 30Hz to 70Hz. Subsonic Filter: Variable control to protect your subwoofers by precisely setting the initial frequency (from 5Hz to 40Hz) that the amplifier will reproduce. FLAT Switch: Allows you to quickly bypass all settings on the CROSSOVER and BASS BOOST controls for maximum frequency reproduction (up to 600Hz). Cooling System: Equipped with internal COOLERs for efficient amplifier cooling. Smart Protection System (PROT LED): Features a protection system that monitors for issues like overheating, short circuits, and low battery voltage, shutting down the amplifier to prevent damage. Recommended Wiring: For maximum power and safety, the manual recommends 00 AWG cable for positive/negative power connections and 7 AWG for speaker output. TECHNICAL SPECIFICATIONS Specification Detail Number of Channels 1 RMS Power @ 1 Ohm (14.4V) 5200W RMS Power @ 2 Ohm (14.4V) 2900W Supply Voltage 9V ~ 17V DC Frequency Response (-3dB) FLAT ON 5Hz ~ 600Hz Frequency Response (-3dB) FLAT OFF 5Hz ~ 250Hz Crossover Low Pass (LPF) 30Hz ~ 250Hz (Variable) Crossover Subsonic Filter 5Hz ~ 40Hz (Variable) Bass Boost 0 ~ +10dB (30Hz ~ 70Hz) Signal to Noise >90 dB Input Impedance 4.8K Ohms Musical Consumption 228A BASS Consumption 456A Dimensions (H x W x L) 3.14" x 9.11" x 13.11" Weight 9.50 lbs
$591.99
-
Sundown Audio Sundown Audio TEAM-10K 10,000 Watt Car Audio Amplifier/Amp
Sundown Audio Team10K | 10,000W RMS Class D Monoblock Amplifier Undeniable Power. Proven Performance. Built for the Elite.The Team10K represents the pinnacle of Sundown Audio’s amplifier engineering. Designed specifically for the needs of SPL competitors and high-output demo builds, this amplifier delivers a staggering 10,000 watts RMS at 1 ohm with precision and control. And for those who demand even more, the Team10K can be strapped to produce up to 20,000 watts RMS, making it a true heavyweight in the world of car audio. At the core of the Team10K is a highly efficient Class D platform, paired with a dual MOSFET PWM power supply and a suite of intelligent protection systems. Whether you're pushing your system hard in the lanes or flexing in a demo, you can rely on stable, consistent output. Real-time monitoring through the wired remote keeps you informed with instant feedback on voltage, temperature, and clipping — giving you confidence and control no matter the environment. With precise crossover tuning, rugged construction, and legendary Sundown reliability, the Team10K is purpose-built for serious enthusiasts who won’t compromise. It’s more than power — it’s performance you can trust, round after round, show after show. Step up to the Team10K and experience what top-tier amplifier engineering really sounds like. CERTIFIED DYNO RUN 12412W @1OHM (14.04 VDC) UNCERTIFIED DYNO RUN TO CLIPPING 13529W (13.8 VDC) DYNAMIC RMS POWER 18830W @ 1OHM (15.06 VDC) DYNAMIC RMS POWER 13306W @ 1OHM (14.32 VDC) Technical Specifications: Power Output (RMS @ 14.4V): 1 Ohm Mono: 10,000W 2 Ohm Mono: 7,000W 4 Ohm Mono: 4,000W 2 Ohm Strapped (Linked): 20,000W General: Class D Digital Monoblock Design Dual MOSFET PWM Power Supply Efficiency: > 97% (at 4 Ohms) Input Sensitivity: 6V – 0.2V Frequency Response: 15Hz – 264Hz Signal-to-Noise Ratio: 91 dB Damping Factor: > 400 THD: < 0.1% Working Voltage: 9V – 16.5V Controls & Filters: Low Pass Filter: 35Hz – 250Hz (24 dB/Oct) Subsonic Filter: 10Hz – 50Hz (24 dB/Oct) Bass Boost: 0 – 9 dB @ 45Hz Phase Shift: 0 – 180° Connectivity & Extras: RCA Inputs/Outputs (for Master/Slave Linking) Wired Remote Control with: Voltage Display Temperature Display Clipping Indicator Protection Features: Thermal Voltage Speaker Short DC Offset Fuse Rating: 1000A (External – not built-in) Dimensions: 27.55" (L) x 11.82" (W) x 3.06" (H)
$2,699.99
-
DC Audio DC Audio A3 5.0K 5000 Watt Mono Block Car Audio Class D Amplifier/Amp+Bass Knob
The 5.0kw competition series amplifier is a 5,000 watt mono block. It is capable of running up to 18 volts for up to 7,300 watts. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped. It comes with a bass knob and a clipping indicator. For power inputs it will accept dual 0 awg for power and dual 0 awg for ground. Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Variable bass boost • Wired remote control • Clipping indicator • Dual 0 awg power and ground inputs (both must be used) We recommend for installation • 1 upgraded battery under the hood • 1 extra 800ci battery in the rear • Minimum of two 0 awg ran from the front battery to the rear battery • Both 0 awg power and ground inputs on amp must have 0 awg ran to them for a total of 4 runs into the amp • Upgraded aftermarket alternator • Dash mounted voltage meter Specifications Features Voltage 5.0kw Output Power (RMS) 4 ohm 14.4V 900W x 1 2 ohm 2,300W x 1 1 ohm 5,000W x 1 1 ohm 16V 6,000W x 1 1 ohm 18V 7,300W x 1 Input Sensitivity 6V~0.2V Low Pass Filter Switchable ( @ 24 dB Slope) Variable Hz 35~250 Subsonic Filter Switchable ( @ 24dB slope ) Variable Hz 10~50 Bass Boost Variable dB 0-9dB Frequency Response Hz 15-270 Signal to Noise Ratio dB 100 Damping factor 150< Efficiency @ 4ohm % Over 90% THD @ 4ohms Less than 0.1% Fuse Rating 500 Amps Linked Fuse Rating 1000 Amps Indicator Power Yes Protection Yes Clip Yes Speaker & Power terminal Mold Type Yes Power Gauge 0Ga Heatsink Length inch/mm 25.59"/650mm Heatsink Width inch/mm 9.38"/66mm Heatsink Height inch/mm 2.35"/59.6mm Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Variable bass boost • Wired remote control • Clipping indicator • Dual 0 awg power and ground inputs (both must be used)
$2,063.60 $1,649.99
