Monoblock (1-Channel)
-
Ampere Audio Ampere Audio AA-3K 3,000W Mono Block Car Amplifier – High Power Car Audio Amp
Unleash Serious Performance with the Ampere Audio AA-3K Car Amplifier When it comes to building a powerful bass system, having the right amplifier can make all the difference. Many enthusiasts struggle with amplifiers that promise big numbers but fail to deliver consistent performance when it matters most. Whether you're upgrading your daily driver, building a weekend demo vehicle, or simply looking for reliable power for your subwoofers, you need an amplifier that combines output, efficiency, and control. The Ampere Audio AA-3K was designed to do exactly that. Why Reliable Power Matters An amplifier is the foundation of any subwoofer system. When an amplifier runs out of power, overheats, or clips excessively, performance suffers and your equipment is put at risk. Weak amplifiers can leave subwoofers underpowered, while poorly designed amplifiers often struggle to maintain clean output during demanding listening sessions. The AA-3K eliminates those concerns by delivering a true balance of power and reliability. Built around a high-efficiency Class D platform and engineered with a robust Dual MOSFET PWM power supply, it provides the current your subwoofers need while maintaining stable operation under heavy loads. Built for Bass Enthusiasts The AA-3K is designed to produce up to 3,000 watts RMS at 1 ohm and can be strapped with a second amplifier for an incredible 6,000 watts RMS of combined output. Whether you're powering a single high-performance subwoofer or multiple drivers in a larger system, the AA-3K delivers the authority needed to bring your music to life. Key features include: Dual MOSFET PWM power supply for stable, efficient power delivery Advanced Class D technology for high output with minimal heat Strapping capability for 6,000W performance Wired remote with real-time voltage, temperature, and clipping display Independent crossovers and adjustable phase for precision tuning Control That Lets You Fine-Tune Your System Every vehicle, enclosure, and subwoofer combination is different. That's why the AA-3K includes a complete suite of tuning controls designed to help you get the most from your system. Variable crossover controls allow you to tailor your frequency response, while adjustable phase and bass boost controls help maximize performance based on your installation. The included wired remote gives you real-time access to critical system information, including amplifier voltage, operating temperature, and clipping status. This allows you to monitor performance and make adjustments without leaving the driver's seat. Built to Perform Day After Day The AA-3K was designed for enthusiasts who demand more than just peak numbers. With advanced protection circuitry guarding against thermal overload, voltage fluctuations, speaker shorts, and DC offset, this amplifier is built to withstand the demands of real-world use. Whether you're chasing higher output, upgrading your current setup, or building a system that simply gets loud and stays reliable, the Ampere Audio AA-3K delivers the performance, control, and durability needed to take your bass to the next level. Technical Specifications: Power Output (RMS @ 14.4V): 1 Ohm Mono: 3,000W 2 Ohm Mono: 2,000W 4 Ohm Mono: 1,000W 2 Ohm Strapped (Linked): 6,000W General: Class D Digital Monoblock Design Dual MOSFET PWM Power Supply Efficiency: >94% Input Sensitivity: 6V – 0.2V Frequency Response: 14Hz – 266Hz Signal-to-Noise Ratio: 99dB Damping Factor: >400 THD: <0.1% Working Voltage: 9V – 16.5V Controls & Filters: Low Pass Filter: 35Hz – 250Hz (24dB/Octave) Subsonic Filter: 10Hz – 50Hz (24dB/Octave) Bass Boost: 0 – 9dB @ 45Hz Phase Shift: 0° – 180° Connectivity & Extras: RCA Inputs / Outputs Master / Slave Linking Capability Wired Remote Control with: Voltage Display Temperature Display Clipping Indicator Protection Features: Thermal Protection Voltage Protection Speaker Short Protection DC Offset Protection Fuse Rating: 300A (External – not built-in) Dimensions: 11.81” (L) x 11.82” (W) x 3.06” (H)
$689.99
-
DC Audio DC Audio CS-2100X1 1100 Watt Mono Block Car Audio Class D Amplifier/Amp+Bass Knob
Amplifier Description The DC-CS2100x1 is a compact series amplifier capable of making 2,500 watts. Its High power mono block. It has 1/0 inputs and onboard clipping lights. It also comes with a bass knob and a clipping indicator. Designed to make more power in less space. Output Power (RMS) 4 ohm 1000Wx1 @ 14.4 Volts 2 ohm 1500Wx1 @ 14.4 Volts 1 ohm mono 2100x1 @ 14.4 Volts 1 ohm mono 2450x1 @ 16.0 Volts Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Wired Bass Knob remote control W/ Clip light • RCA Pass Thru • Onboard clip light AMP SPECS: DC Amp Model: CS 2100x1 Input Sensitivity 6V~0.2V Frequency Response 10Hz~250KHz 24dB / Octave Crossover YES Low Pass 35Hz ~ 250Hz Subsonic Filter 10Hz-50hz Bass Boost @45hz NO Phase Shift NO Remote Control Yes Clip Indicator Yes Signal to Noise Ratio dB90 Damping Factor 150< THD @ 4ohms Less than 0.1% Fuse Rating External 250 amp LED Status Lights Power/Protect/Clip Master/Slave NO Heatsink Length 12.99"/330mm Heatsink Width 4.72"/120mm Heatsink Height 1.96"/50.0mm
$399.99
-
Sundown Audio Sundown Audio SAM-1000D Mono Powersports Amplifier
1000 @ 1 ohm 700 @ 2 ohms 400 @ 4 ohms Variable 12dB low pass filter: 50Hz-250Hz Variable 18dB bass boost Power and protection indicators included Thermal, voltage, and speaker short protection circuitry Waterproof (IP67 rated) Sealed wire/signal bulkheads Gasketed audio control cover RCA line out Sundown SAMv.2 amplifiers are ideal for your boat, bike or UTV. Whether you play in the mud, sand, dirt or asphalt, this micro amplifier performs in any weather, and with all the power and acoustic control you need to bang out the bass! SAM amps are IP67 rated, certified to withstand full submersion when getting wild off-road, or when its time to clean up when the fun is done. Ready to go big? With the included line output, it’s easy to add additional amplifiers to the system. Time to ride!
$349.99
-
Sundown Audio Sundown Powersports SAM-600D 600w Mono-Block Marine Micro Class D Amplifier SAMv.2
600 @ 1 ohm 415 @ 2 ohms 230 @ 4 ohms Variable 12dB low pass filter: 50Hz-250Hz Variable 18dB bass boost Power and protection indicators included Thermal, voltage, and speaker short protection circuitry Waterproof (IP67 rated) Sealed wire/signal bulkheads Gasketed audio control cover RCA line out Sundown SAMv.2 amplifiers are ideal for your boat, bike or UTV. Whether you play in the mud, sand, dirt or asphalt, this micro amplifier performs in any weather, and with all the power and acoustic control you need to bang out the bass! SAM amps are IP67 rated, certified to withstand full submersion when getting wild off-road, or when its time to clean up when the fun is done. Ready to go big? With the included line output, it’s easy to add additional amplifiers to the system. Time to ride!
$299.99
-
Ampere Audio Ampere Audio AA-5K 5,000W Mono Block Car Amplifier – High Power Car Audio Amp
Take Command of Clean Power with the Ampere Audio AA-5K Car Amplifier When precision and dependability matter just as much as output, the Ampere Audio AA-5K steps up. Designed for daily drivers and competitors alike, this amplifier delivers the ideal balance of power, clarity, and control. Many mid-power amps promise performance — few deliver it without distortion, overheating, or drop-off under load. The AA-5K brings consistency and confidence to systems that demand serious, everyday performance. Power You Can Push Without Fear Anyone who’s ever run an amp at its limit knows how easily things can go wrong: clipped signals, voltage dips, or thermal shutdowns. The AA-5K eliminates those worries with a design that channels energy efficiently and cleanly. It’s built for real-world setups — where music runs long, bass hits hard, and reliability can’t be optional. With Ampere Audio engineering behind it, the AA-5K is tuned for high efficiency, low heat, and dependable stability even at demanding impedances. Built to Perform, Tuned to Impress Delivering up to 5,000 watts RMS at 1 ohm, the AA-5K is a Class D monoblock amplifier that brings serious power to competitive and daily builds alike. When linked, it produces a commanding 10,000 watts, giving you the flexibility to expand or compete as your system grows. Whether you’re after clean lows, responsive control, or show-level sound, the AA-5K delivers it with finesse. Performance highlights: Dual MOSFET PWM power supply for efficient, stable output Class D topology for strong power delivery with minimal heat Strapping capability for 10,000W combined performance Wired remote with real-time voltage, temperature, and clipping display Fully adjustable crossovers and phase control for perfect system alignment Efficient Power with a Purpose The AA-5K gives you full flexibility over your setup — offering independent crossovers, subsonic filtering, and variable phase adjustment. Fine-tune your system to hit harder, cleaner, and more precisely. Combined with Ampere Audio’s high-efficiency power design, it’s made to play louder for longer without fatigue or failure. Whether you’re daily driving or demoing, the AA-5K’s combination of performance, protection, and precision ensures your system stays consistent no matter the conditions. Engineered for Durability, Designed for Enthusiasts From internal component selection to circuit protection, every part of the AA-5K was designed with long-term reliability in mind. Thermal, voltage, and short protection systems keep your investment safe while ensuring uninterrupted performance. If your goal is dependable, clean, and confident power — the AA-5K delivers every time. Technical Specifications: Power Output (RMS @ 14.4V): 1 Ohm Mono: 5,000W 2 Ohm Mono: 3,000W 4 Ohm Mono: 2,000W 2 Ohm Strapped (Linked): 10,000W General: Class D Digital Monoblock Design Dual MOSFET PWM Power Supply Efficiency: >97% (at 4 Ohms) Input Sensitivity: 6V – 0.2V Frequency Response: 14Hz – 265Hz Signal-to-Noise Ratio: 94 dB Damping Factor: >340 THD: <0.1% Working Voltage: 9V – 16.5V Controls & Filters: Low Pass Filter: 35Hz – 250Hz (24 dB/Oct) Subsonic Filter: 10Hz – 50Hz (24 dB/Oct) Bass Boost: 0 – 9 dB @ 45Hz Phase Shift: 0 – 180° Connectivity & Extras: RCA Inputs/Outputs (for Master/Slave Linking) Wired Remote Control with: Voltage Display Temperature Display Clipping Indicator Protection Features: Thermal Voltage Speaker Short DC Offset Fuse Rating: 450A (External – not built-in) Dimensions: 15.74" (L) × 11.82" (W) × 3.06" (H)
$999.99
-
Ampere Audio Ampere Audio AA-8K 8,000W Mono Block Car Amplifier – High Power Car Audio Amp
Command Unstoppable Output with the Ampere Audio AA-8K Car Amplifier When serious competitors chase numbers and clarity, every watt matters. The Ampere Audio AA-8K is built for those who refuse to settle — the demo kings, the SPL warriors, and anyone who lives for precision and power. Many amplifiers can get loud, but few maintain authority and consistency when pushed to the edge. The AA-8K changes that with a design that blends sheer strength with control and endurance. Why Control Is the Real Power An amplifier that’s all muscle and no discipline can become your system’s weakest link. Overheating, clipping, and distorted output don’t just ruin your sound — they can end your gear. The challenge isn’t finding power; it’s finding power that performs flawlessly when demand peaks. That’s why the AA-8K exists. It’s engineered to deliver massive output that stays clean, efficient, and cool. Built around Ampere Audio’s competition-proven platform, it offers precise tuning options, smart protection, and relentless reliability that seasoned competitors trust. Built for Those Who Push the Limits The AA-8K is a Class D monoblock amplifier capable of producing 8,000 watts RMS at 1 ohm — and when strapped, it unleashes a thunderous 16,000 watts. This amplifier isn’t for the faint of heart. It’s designed for systems that demand big current, extreme control, and consistent power delivery. Whether you’re building for the competition lanes or showing off at demo events, the AA-8K delivers the authority your subs deserve. Core performance highlights include: Dual MOSFET PWM power supply for clean, consistent voltage Efficient Class D topology for maximum output and low heat Strapping capability for 16,000W performance Wired remote with live voltage, temperature, and clipping indicators Independent crossover and phase controls for system tuning precision Efficient Power, Confident Performance Brute strength means nothing without control. The AA-8K gives you full command of your setup — with variable crossovers, subsonic filtering, and phase adjustment built in. Whether you’re dialing in your frequency response or monitoring voltage during a full-tilt demo, this amplifier gives you the tools to stay in control of your sound. Its advanced efficiency also means more playing time and less downtime. Run it hard, stay cool, and let your subs deliver clean power hit after hit. Designed to Dominate, Built to Last From the inside out, the Ampere Audio AA-8K was engineered for endurance. With robust components, intelligent protection circuits, and superior thermal design, it’s built to handle extreme conditions and high-demand systems without compromise. If you demand an amplifier that can take abuse, maintain composure, and perform on command — the AA-8K is your competitive advantage. Technical Specifications: Power Output (RMS @ 14.4V): 1 Ohm Mono: 8,000W 2 Ohm Mono: 5,000W 4 Ohm Mono: 3,000W 2 Ohm Strapped (Linked): 16,000W General: Class D Digital Monoblock Design Dual MOSFET PWM Power Supply Efficiency: >97% (at 4 Ohms) Input Sensitivity: 6V – 0.2V Frequency Response: 15Hz – 264Hz Signal-to-Noise Ratio: 94 dB Damping Factor: >400 THD: <0.1% Working Voltage: 9V – 16.5V Controls & Filters: Low Pass Filter: 35Hz – 250Hz (24 dB/Oct) Subsonic Filter: 10Hz – 50Hz (24 dB/Oct) Bass Boost: 0 – 9 dB @ 45Hz Phase Shift: 0 – 180° Connectivity & Extras: RCA Inputs/Outputs (for Master/Slave Linking) Wired Remote Control with: Voltage Display Temperature Display Clipping Indicator Protection Features: Thermal Voltage Speaker Short DC Offset Fuse Rating: 650A (External – not built-in) Dimensions: 19.68" (L) × 11.82" (W) × 3.06" (H)
$1,399.99
-
Kicker Kicker 51LX16501 1650W Car Audio Mono-block Class D Amplifier/Amp
The KICKER LX-Series is a perfect marriage of SQL design and high-powered output, utilizing feedback from the industry to deliver the most requested features while maintaining the highest performance possible. All monoblock amplifiers come with a robust remote level control (LXRC) featuring SHOCwave2.0™. From the Ground Up The LX-Series represents KICKER’s high-power premium amplifier line designed in-house from the ground up. Precision control, next-level flexibility, designed for performance, built to last. Monitor and adjust with the included LXRC Dash Remote Class-D design for lower current draw, longer playing times, and lower operating temperatures Gain-match LEDs show you perfect gain setting KickEQ+™ parametric bass boost 0–6dB Customize the appearance with reversible center panel and choice of 11 RGB LED accent colors Equipped with FIT+™ technology, accepting low- and high-level signals up to 40V, with differential inputs designed to eliminate unwanted noise for crystal-clear sound LX features choice of turn-on modes and comprehensive protections for thermal, circuit, and voltage stability, ensuring reliable performance Comes with the LX REMOTE CONTROL (LXRC) Dynamic fingertip dash remote of bass level adjustment Features SHOCwave2.0™ (Sub-Harmonic Octave Creation), KICKER’s 2nd-gen digital bass restoration algorithm that recovers lost, low-bass frequencies vital to your music selections Displays battery voltage in fuel-gauge-style readout Control of its RGB LED brightness Output clipping indicator to prevent distortion and protect your system Cable Length – 19.75 feet (6m) RJ45 cable LX 1650.1 white paper 51LX16501 Whitepaper PDF RMS Power [Watts Channel] @ 14.4V 1Ω mono: 1650W2Ω mono: 1000W4Ω mono: 550W Dynamic Power [Watts] 2200 Frequency Response [Hz] 10–160, +0/–1dB Signal-to-Noise Ratio(a-weighted, re: rated power) >95dB Signal-to-Noise Ratio(ref: 1W output) >75dB Dimensions [in, cm] Height: 2-3/8 (6 cm) Width: 8-7/16 (21.4 cm)Length: 9-7/16 (24 cm) Input Sensitivity High level 1V–40VLow level 125mV–5V Variable Electronic Crossover LP; 24dB/octave Linkwitz-Riley,variable 40–160Hz Variable Subsonic Filter 24dB/octave Linkwitz-Riley,variable hi-pass @ 10–80Hz KickEQ+™ Parametric Bass Boost 0–6dB, variable center 20–80Hz,variable bandwidth 1–5 Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.
$799.99 $699.99
-
DC Audio DC Audio CS-1100X1 1100 Watt Mono Block Car Audio Class D Amplifier/Amp+Bass Knob
Amplifier Description The DC-CS 1000.1 is a compact series amplifier capable of making 1,100 watts. Its High power mono block. It has 4awg inputs and onboard clipping lights. It also comes with a bass knob and a clipping indicator. Designed to make more power in less space. Output Power (RMS) 4 ohm 500Wx1 @ 14.4 Volts 2 ohm 800Wx1 @ 14.4 Volts 1 ohm mono 1100x1 @ 14.4 Volts 1 ohm mono 1400x1 @ 16.0 Volts Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Wired Bass Knob remote control W/ Clip light • RCA Pass Thru • Onboard clip light AMP SPECS: DC Amp Model: CS 1100x1 Input Sensitivity 6V~0.2V Frequency Response 10Hz~250Hz 24dB / Octave Crossover YES Low Pass 35Hz ~ 250Hz Subsonic Filter 10Hz-50hz Bass Boost @45hz NO Phase Shift NO Remote Control Yes Clip Indicator Yes Signal to Noise Ratio dB92 Damping Factor 150< THD @ 4ohms Less than 0.1% Fuse Rating External 100 amp LED Status Lights Power/Protect/Clip Master/Slave NO Heatsink Length 8.27"/210mm Heatsink Width 4.72"/120mm Heatsink Height 1.96"/50.0mm
$349.99
-
Sundown Audio Sundown Audio SAM-1500D Mono Powersports Amplifier
1,500 @ 1 ohm 1,130 @ 2 ohms 700 @ 4 ohms Variable 12dB low pass filter: 50Hz-250Hz Variable 18dB bass boost Power and protection indicators included Thermal, voltage, and speaker short protection circuitry Waterproof (IP67 rated) Sealed wire/signal bulkheads Gasketed audio control cover RCA line out Sundown SAMv.2 amplifiers are ideal for your boat, bike or UTV. Whether you play in the mud, sand, dirt or asphalt, this micro amplifier performs with all the power and acoustic control you need to bang out the bass! SAM amps are IP67 rated, certified to withstand full submersion when getting wild off-road, or when its time to clean up when the fun is done. Ready to go big? With the included line output, it’s easy to add additional amplifiers to the system. Time to ride!
$399.99
-
Deaf Bonce Deaf Bonce MLA-1500 Monoblock 1500 Watt Amplifier
Specifications Model MLA-1500 Class D Number of the channels 1 Frequency response 10 - 180 Hz 1 Ohm RMS Power (14.4 V) 1480 W 2 Ohm RMS Power (14.4 V) 920 W 4 Ohm RMS Power (14.4 V) 540 W Minimum permissible load on the channel 1 Ohm Input SPL 0.2 - 6 V Low pass filter 40 - 180 Hz Crossover 12 dB/Oct Subsonic filter 0 - 50 Hz Input terminal 4 Ga Output terminal 8 Ga Working voltage 10 - 15 V Signal-to-noise ratio ≥ 99 dB Size (WxLxH) 14.76 x 8.50 x 1.96 inch
$239.90
-
Incriminator Audio Incriminator Audio I501 500 Watt Mono 1-Channel Car Audio Amplifier/Amp
Features Digital Class-D Linkable Mono Block Amplifier MOS-FET Pulse Width Modulation Power Supply 1 Ohm Stable Topology / 16 Volt Stable Heavy Duty 2 Oz Copper Layer Double Sided Epoxy PCB Extremely High Precision Electrical Components For Reliability Proprietary Custom Tooled Heatsink Black Molded Oversized 4 AWG Power and Ground Inputs Advanced Strapping / Linking Multi-Layer Bullet Proof Protection Circuit Remote Bass Specifications Rated Power ( 14.4V at 1% THD ) RMS Power - 2 Ohm Linked : 1000W RMS Power - 1 Ohm Mono : 500W RMS Power - 2 Ohm Mono : 375W RMS Power - 4 Ohm Mono : 250W Low Pass Filter ( 24dB/Oct. ) : 35Hz - 250Hz Subsonic Filter ( 24dB/Oct. ) : 10Hz - 50Hz Frequency Response ( +/-3dB ) : 15Hz - 250Hz Bass Boost ( 45Hz ) : 0 – 9dB Input Sensitivity ( Volt +/- 5% ) : 6.0V - 0.2V Signal / Noise Ratio : 95dB Dampening Factor ( 1 Ohm ) : >200 Operation Mode : Master/Slave Power Efficiency ( 4 Ohm ) : 85% Fuse Rating ( 14.4V ) : 50A Fuse Rating ( 14.4V Linked ) : 100A Power Input Connection : 4 Gauge Operation Voltage : 10V - 16.0V Speaker Output Connection : 8 Gauge Dimensions ( Inches ) : 6.85 W x 2.36 H x 10.24 L Dimensions ( Millimeters ) : 174 W x 60 H x 260 L
$219.00
-
DC Audio DC Audio A3 7.5K 7500 Watt Mono Block Car Audio Class D Amplifier/Amp+Bass Knob
The 7.5kw competition series amplifier is a 7,500 watt mono block. It is capable of running up to 18 volts for up to 9,200 watts. It is a linkable amp and designed to run at 1 ohm per amp or 2 ohms when strapped. It comes with a bass knob and a clipping indicator. For power inputs it will accept dual 0 awg for power and dual 0 awg for ground. Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Variable bass boost • Wired remote control • Dual 0 awg power and ground inputs (both must be used) We recommend for installation • 1 upgraded battery under the hood • 3 extra 800ci battery in the rear • Minimum of two 0 awg ran from the front battery to the rear batterys • Both 0 awg power and ground inputs on amp must have 0 awg ran to them for a total of 4 runs into the amp • 2 upgraded aftermarket alternators • Dash mounted voltage meter Specifications Features Voltage 7.5kw Output Power (RMS) 4 ohm 14.4V 2,000W x 1 2 ohm 4,400W x 1 1 ohm 7,500W x 1 1 ohm 16V 8,600W x 1 1 ohm 18V 9,200W x 1 Input Sensitivity 6V~0.2V Low Pass Filter Switchable ( @ 24 dB Slope) Variable Hz 35~250 Subsonic Filter Switchable ( @ 24dB slope ) Variable Hz 10~50 Bass Boost Variable dB 0-9dB Frequency Response Hz 15-270 Signal to Noise Ratio dB 100 Damping factor 150< Efficiency @ 4ohm % Over 90% THD @ 4ohms Less than 0.1% Fuse Rating 750 Amps Linked Fuse Rating 1500 Amps Indicator Power Yes Protection Yes Clip No Speaker & Power terminal Mold Type Yes Power Gauge 0Ga x 2 Heatsink Length inch/mm 32.28"/820mm Heatsink Width inch/mm 9.38"/66mm Heatsink Height inch/mm 2.35"/59.6mm Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Variable bass boost • Wired remote control • Dual 0 awg power and ground inputs (both must be used)
$2,326.50 $1,899.99
-
Sundown Audio SIA-2500D Full-Range Mono Amplifier
2,500 x 1 @ 1 ohm RMS 2,500 x 1 @ 2 ohms RMS 2,000 x 1 @ 4 ohms RMS Variable 12dB low pass filter: 40Hz-20kHz Variable 12dB high pass filter: 10Hz-1kHz Variable 12dB Bass Boost @ 50Hz Power, protection & clipping indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Advanced 3-speed fan design Subsonic filter Intelligent full bridge design Wired remote control with clipping indicator included Delivering the same power at 1 or 2 ohms, Sundown SIA amplifiers are built with power and stability at their core. These full-bridge amplifiers feature a heavy heatsink for outstanding thermal management, while the three-speed Smart Cooling fan and advanced power supply design protects the amplifier from overheating and distorted output.
$384.99
-
Kicker Kicker CXA1200.1T 1200W Monoblock Amplifier 46CXA1200.1T
Specifications Performance RMS Power Output (Watts x Channels) 600 x 1 Peak Power Output (Watts x Channels) 2400 x 1 Power at 2 Ohms (Watts x Channels) 1200 x 1 Bridged Power (Watts x Channels) N/A Minimum Impedance Bridged N/A Minimum Impedance Unbridged 1 Minimum Impedance 1 Best Frequency Response 25-200 Hz THD at Rated RMS Power 1% Signal to Noise Ratio 70 dB Input Voltage 14.4v Features Amplifier Class D Low-Pass Crossover Frequency 50-200 Hz Low-Pass Slope (dB/octave) 12 dB/octave High-Pass Crossover Frequency N/A High-Pass Slope (dB/octave) N/A Bass Boost 0-6 dB Bass Boost Frequency 40 Hz Fan Cooled No Fuse Rating 100 Speaker Level Inputs Yes Preamp Outputs 1 pair Width (inches) 12-5/8 Height (inches) 2-3/8 Depth (inches) 6-3/4 Parts Warranty 2 Years Labor Warranty 2 Years
$399.99
-
Sundown Audio Sundown Audio SALT-4 Class D Amplifier
8,000 x 1 @ 2 ohms RMS (when linked) 4,000 x 1 @ 1 ohms RMS mono 2,000 x 1 @ 2 ohms RMS mono 1,000 x 1 @ 4 ohms RMS mono 24dB variable subsonic filter: 10HZ - 50HZ 24dB variable low pass filter: 35HZ - 250HZ Variable bass boost @ 45Hz 0-9dB Phase shift control 0-180 degrees Power, clipping & protection indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Included wired remote control displays voltage, temperature, and clipping Producing optimum power at realistic voltages (the 12s, rather than needing 14+ volts), the SALT – Sundown Audio Low-Voltage Technology – is Sundown’s answer! SALT amplifiers represent the pinnacle of Korean Class-D amplifier technology. Whether you are a world-class SPL competitor or simply want to bang harder than absolutely anyone else, the SALT series will be right at home in your system.
$1,499.99
-
Sundown Audio SIA-1250D Full-Range Mono Amplifier
1,250 x 1 @ 1 ohm RMS 1,250 x 1 @ 2 ohms RMS 800 x 1 @ 4 ohms RMS Variable 12dB low pass filter: 40Hz-20kHz Variable 12dB high pass filter: 10Hz-1kHz Variable 12dB Bass Boost @ 50Hz Power, protection & clipping indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Advanced 3-speed fan design Subsonic filter Intelligent full bridge design Wired remote control with clipping indicator included Delivering the same power at 1 or 2 ohms, Sundown SIA Smart amplifiers are built with power and stability at their core. These full-bridge amplifiers feature a heavy heatsink for outstanding thermal management, while the three-speed Smart Cooling fan and advanced power supply design protects the amplifier from overheating and distorted output.
$299.99
-
Sundown Audio Sundown Audio SALT-12 Competition Class D Amplifier
12,000 x 1 @ 1 ohms RMS mono 6,000 x 1 @ 2 ohms RMS mono 3,000 x 1 @ 4 ohms RMS mono Frequency Response : 10 Hz – 250 HZ 24dB variable subsonic filter: 10HZ - 50HZ 24dB variable low pass filter: 35HZ - 250HZ Variable bass boost @ 45Hz 0-9dB Phase shift control 0-180 degrees Power, clipping & protection indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Included wired remote control displays voltage, temperature, and clipping Sundown's biggest powerhouse, the SALT-12 delivers a mind-twisting 12k at 1 ohm. The amp features both a 24dB variable subsonic and low pass filter, along with a bass boost at 45Hz, letting you dial in your personal, perfect sound. The phase shift control makes it easy to precisely adjust the output. With onboard indicators for power, clipping, and protection you’ll have full control over your setup. Use the included wired remote control to see voltage, temperature, and clipping at a glance.Producing optimum power at realistic voltages (the 12s, rather than needing 14+ volts), the SALT – Sundown Audio Low-Voltage Technology – is Sundown’s answer! SALT amplifiers represent the pinnacle of Korean Class-D amplifier technology. Whether you are a world-class SPL competitor or simply want to bang harder than absolutely anyone else, the SALT series will be right at home in your system.
$4,499.99
-
Taramps Taramps HD800 HD Compact 800 Watt 1-Ohm Mono Class-D Car Audio Amplifier/Amp
The launch of Taramp's comes down to a sophisticated amplifier with modern design, able to run a complete sound system with top quality sound and high definition, giving the user the perception of minute details present in the music.The HD 800 has 1 crossover that provides the freedom to work independently adjustments High Pass (HPF) ranging from 10 to 50 Hz and low pass (LPF) with a range of 50 Hz to 22 KHz, providing more quality acute and high frequencies, and keeps the Bass Boost function, highlighting the frequency of severe sub 0-10 dB at 50 KHz. The new model amplifier Taramp's can be found in versions 1 ohm and 2 ohms, both with 1 channel LED monitor with clip indicators and distortion, and security systems that act as output protection (short) and low and high strain.Using digital technology (Class D) and all the features of the HD line, while running the sound system, the HD 800 model demonstrates its efficiency with less heat, taking much of the energy to achieve superior performance and sonic performance. Number of Channels: 1Power 13.8 VDC - 2 ohm: 959W RMSPower 13.8 VDC - 4 ohm: 547W RMSPower 13.8 VDC - 8 ohm: 297W RMSPower 12.6 VDC - 2 ohm: 800W RMSPower 12.6 VDC - 4 ohm: 456W RMSPower 12.6 VDC - 8 ohm: 248W RMSInput Sensitivity: 250mV @ (-9.78 dBm)Total Harmonic Distortion ( THD): 0.3%Frequency Response: 10Hz to 15KHzCrossover: -HPF (High Pass Filter): 10Hz to 50Hz (-12dB / 8th) VariableLPF (Low Pass Filter): 50Hz to 15KHz (-12dB / 8th) VariableBass Boost:0-10 dB (50Hz)Input Impedance: 18K OHMSSystem Protection: Short on Output Voltage / High Power / LowVoltage Low Power: 10.5 VDCVoltage Maximum Supply: 16VDCConsumption at Rest: 1.10 AmpMaximal Musical @ 12.6 VDC: 38.5 AmpMaximum Consumption in sinusoidal signal (1kHz) @ 12.6 VDC: 77 AmpDimensions (WxHxD): 226 X 55 X 187mmWeight: 1.46 kg
$299.95
-
Sundown Audio SIA-3500D v2 Full-Range Mono Amplifier
3,500 x 1 @ 1 ohm RMS 3,300 x 1 @ 2 ohms RMS 2,600 x 1 @ 4 ohms RMS Variable 12dB low pass filter: 40Hz-20kHz Variable 12dB high pass filter: 10Hz-1kHz Power, protection & clipping indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Advanced 3-speed fan design Subsonic filter Intelligent full bridge design Wired remote control with clipping indicator included Delivering tremendous power at 1, 2, or 4 ohms, the Sundown SIA amps are built with power and stability at their core. These full-bridge amplifiers feature a heavy heatsink for outstanding thermal management, while the three-speed Smart Cooling fan and advanced power supply design protects the amplifier from overheating and distorted output. Made to bang all day long, by the world champions of bass!
$424.99
