Description
The 1.2kw competition series amplifier is a 1,200 watt mono block. It is capable of running up to 16 volts for up to1,450 watts. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped.
It comes with a bass knob. For power inputs it will accept 4 awg for power and 4 awg for ground.
Features | Voltage | 1.2kw |
| Output Power (RMS) | 4 ohm | 14.4V | 350Wx1 |
| | 2 ohm | 14.4V | 700Wx1 |
| | 1 ohm | 14.4V | 1,200Wx1 |
| | 1 ohm | 16V | 1,450Wx1 |
| | 1 ohm | 18V | No |
| Input Sensitivity | 6V~0.2V | | |
| Low high Filter | Switchable | | |
| ( @ 24 dB Slope) | Variable | Hz | 35~250 |
| Subsonic Filter | Switchable | | |
| ( @ 24 dB Slope) | Variable | Hz | 10~50 |
| Bass Boost | Variable | dB | 0-9dB |
| Frequency Response | | Hz | 15-270 |
| Signal to Noise Ratio | | dB | 100 |
| Damping factor | | | 100< |
| Efficiency @ 4ohm | | % | 81% |
| THD @ 4ohms | Less than 0.1% |
| Fuse Rating | 120 Amps |
| Indicator | Power | | Yes |
| | Protection | | Yes |
| | Clip | | No |
| Speaker & Power terminal | Mold Type
| | Yes |
| | Power | Gauge | 4Ga |
| Heatsink Length | 16.5" (419mm) |
| Heatsink Width | 9.38" (238mm) |
| Heatsink Height | 2.35" (59.6mm) |
Key Features
• 1 ohm stable
• Variable low pass filter
• Variable subsonic filter
• Variable bass boost
• Wired remote control
