15" Subwoofers
-
Sundown Audio Ampere Audio AA-2.75 Series 2000W Car Subwoofer
1000W RMS DVC Premium Subwoofer 1000W RMS - Conservatively Rated Available in 10"-18" 10" and 12" include carbon fiber dustcap 15" and 18" include printed dustcap Dual 2 or 4 ohm voice coils Aluminum 2.75” Voice Coil Spring-loaded terminals Vented magnetic gap High-velocity vented frame spacer ring Large aluminum Faraday ring for smooth acoustic response Patented high-strength cast aluminum frame High-temperature voice coil wire Spring-loaded terminals Stitched-on double “XL” tinsel lead wires The AA-2.75 is the first offering of our new and improved lineup and is a high-performance subwoofer, engineered for superior audio precision and durability, designed to meet the demands of professional and enthusiast-level builds. Featuring a robust design and advanced materials, it guarantees exceptional thermal and acoustic performance. 1000W RMS Power Rating: Conservatively rated to deliver sustained high output with minimal thermal compression. Dual 2 or 4 Ohm Voice Coils: Impedance options enable optimized integration with various amplifier setups for maximum efficiency and output. 2.75” Aluminum Voice Coil: Large-diameter coil wound on a lightweight, high-temperature aluminum former ensures excellent thermal dissipation and linear performance under heavy load. Spring-Loaded Terminals: High-tension spring contacts ensure reliable connections and streamline installation processes. Vented Magnetic Gap: Incorporates a precision-machined gap with cooling vents to prevent power compression and maintain consistent magnetic flux density. Advanced Structural and Acoustic Features High-Velocity Vented Frame Spacer Ring: Facilitates enhanced airflow around the voice coil for superior cooling, reducing thermal fatigue. Aluminum Faraday Ring: A large, low-inductance ring minimizes electromagnetic distortion, achieving a flatter impedance curve and smoother frequency response. Patented Cast Aluminum Frame: High-strength, non-resonant structure optimizes rigidity while minimizing weight for reduced mechanical losses. High-Temperature Voice Coil Wire: Coated with advanced heat-resistant materials, the voice coil withstands prolonged high-power operation without degradation. Double "XL" Tinsel Lead Wires: Stitched directly into the spider, these oversized leads enhance current handling capacity and resist fatigue under high excursion conditions. With meticulous attention to thermal management and mechanical stability, this subwoofer is designed to be an everyday performance monster. Its innovative construction ensures long-term reliability and precise acoustic output, making it ideal for professional-grade installations and high-performance audio systems.
$199.99 - $249.99
-
Ampere Audio Ampere Audio AA-3.0 Series Car Subwoofer Recone
Recone for AA-3.0 Series subwoofers — AA-3.0 10", AA-3.0 12", AA-3.0 15", and AA-3.0 18" (Dual 1Ω and Dual 2Ω).
$169.99 - $259.99
-
Ampere Audio Ampere Audio AA-2.0 Series 1000W Car Subwoofer
AA 2.0 SERIES SUBWOOFERS The AA 2.0 Series was designed for listeners who want real aftermarket bass performance without sacrificing sound quality, efficiency, or everyday usability. Engineered for clean low-frequency response and dependable output, the 2.0 platform delivers the kind of impact that transforms a factory audio system into something far more capable and engaging. Every AA 2.0 subwoofer is built around a strong steel basket, paper and foam cone assembly, carbon fiber dust cap, and a 2-inch 4-layer copper voice coil. This combination gives the 2.0 platform the balance needed for strong daily output, musical response, and long-term reliability in real-world installations. The dual magnet motor structure and 14 mm of XMAX allow the AA 2.0 Series to deliver clean, controlled bass with the output and authority expected from a serious aftermarket subwoofer. Whether installed in a compact daily system or a stronger low-frequency setup, the 2.0 platform was built to provide balanced performance, musical response, and long-term durability. The AA 2.0 Series serves as the foundation of the AA subwoofer lineup, combining clean design, proven construction, and dependable low-frequency performance into a platform built for enthusiasts who want more from their everyday system. FEATURES 500 Watts RMS power handling Steel basket construction Paper and foam cone assembly Carbon fiber dust cap Progressive cotton spider 2” 4-layer copper voice coil 33mm winding height Dual 40 oz magnet motor structure 14 mm Xmax Designed for daily-driven audio systems Built for clean, dependable low-frequency output Available in Dual 2 Ohm and Dual 4 Ohm configurations ENGINEERED FOR EVERYDAY PERFORMANCE The AA 2.0 Series was engineered to deliver stronger low-frequency performance than factory and entry-level aftermarket systems while maintaining the responsiveness and musical accuracy needed for everyday listening. Its lightweight cone assembly, copper voice coil, and balanced motor structure work together to produce clean bass across a wide range of music styles. From compact 8-inch enclosures to stronger 10-inch and 12-inch systems, the AA 2.0 platform delivers the output, control, and reliability needed for enthusiasts building a well-rounded daily audio system.
$79.99 - $99.99
-
Ampere Audio Ampere Audio AA-2.75 Series 10"/12" Car Subwoofer Recone
Recone for AA-2.75 Series subwoofers — AA-2.75 10" and AA-2.75 12" (Dual 2Ω and Dual 4Ω).
$119.99 - $124.99
-
Ampere Audio Ampere Audio AA-3.0 Series 4000W Car Subwoofer
AA 3.0 SERIES SUBWOOFERS The AA 3.0 Series was built for enthusiasts who demand more from their equipment. More output. More control. More durability under real-world abuse. Designed around a competition-inspired motor and suspension platform, the 3.0 Series delivers deep, authoritative low-frequency response with the composure required for high-power daily systems and demo-focused builds alike. At the core of every AA 3.0 subwoofer is a high-force 4-stack ferrite motor paired with a 3-inch flat-wound 4-layer CCA voice coil featuring an extended 65mm winding height. This combination was engineered to improve thermal stability, maintain motor strength throughout excursion, and deliver consistent performance during long demo sessions and sustained high-output use. The reinforced cast aluminum basket and triple-layer progressive suspension system work together to keep the moving assembly controlled under heavy excursion while maintaining the mechanical precision needed for clean and repeatable low-frequency reproduction. Combined with the lightweight carbon fiber cone assembly and oversized foam surround, the AA 3.0 is capable of moving serious air while remaining responsive and composed at full tilt. From daily-driven systems to competition-inspired builds, the AA 3.0 platform was designed to perform under pressure. The deep mechanical structure, oversized motor assembly, and high-excursion suspension give the 3.0 Series the ability to deliver aggressive low-end output without sacrificing reliability or control. This is a purpose-built high-output platform engineered for enthusiasts who expect their equipment to stay composed under abuse, deliver authority at every volume level, and perform every time the system is pushed to its limits. FEATURES • 2000 Watts RMS power handling • High-strength cast aluminum basket • Carbon fiber reinforced cone assembly • Carbon fiber dust cap • Triple-layer progressive suspension • 3” flat-wound 4-layer CCA voice coil • Extended 65mm winding height • High-force 4-stack ferrite motor assembly • Oversized chrome top and back plates • High-excursion foam surround • Competition-inspired mechanical architecture • Engineered for high-output daily and demo systems • Available in Dual 1 Ohm and Dual 2 Ohm configurations ENGINEERED FOR REAL-WORLD OUTPUT The AA 3.0 platform was developed for enthusiasts building systems that are expected to perform consistently under real power. Whether installed in a daily-driven demo vehicle or a dedicated high-output build, the 3.0 Series was engineered to maintain control, stability, and reliability when pushed hard. Every component was selected with long-term durability and sustained performance in mind — from the oversized motor assembly and reinforced suspension to the high-temperature flat-wound voice coil architecture. The result is a subwoofer platform capable of delivering commanding low-frequency response with the confidence and consistency serious bass enthusiasts expect.
$399.99 - $489.99
-
Ampere Audio Ampere Audio AA-2.0 Series Car Subwoofer Recone
Recone for AA-2.0 Series subwoofers — AA-2.0 8", AA-2.0 10", and AA-2.0 12" (Dual 2Ω and Dual 4Ω).
$39.99 - $49.99
-
Ampere Audio Ampere Audio AA-2.75 Series 8" 1600W Car Subwoofer
The AA 2.75 8” was built for enthusiasts who want serious low-frequency performance in a compact platform. Designed to deliver strong output, clean response, and dependable control, this driver gives smaller systems the authority and impact normally expected from larger subwoofers. Built around a cast aluminum basket, paper and foam cone assembly, carbon fiber dust cap, and upgraded suspension system, the AA 2.75 8” brings a more serious level of construction to compact bass applications. Its 2.5-inch 4-layer copper voice coil and dual 80 oz motor structure provide the strength, thermal capacity, and control needed for high-output daily systems. With 19mm of XMAX and a reinforced suspension package using three layer progressive spiders, the AA 2.75 8” is designed to move with authority while maintaining stability under excursion. Whether used in a space-limited daily build, truck enclosure, or compact high-output system, this driver delivers the kind of low-end performance that proves an 8-inch subwoofer can still be serious. The AA 2.75 8” is the compact powerhouse of the AA lineup — small enough for tight installs, strong enough for real bass, and built with the same attention to control and durability that defines the 2.75 platform. FEATURES800 Watts RMS power handlingCast aluminum basketPaper and foam cone assemblyCarbon fiber dust capThree layer progressive spider pack2.5” 4-layer copper voice coil45mm winding heightDual 80 oz magnet motor structureChrome top and back plates19mm XMAXDesigned for compact high-output systemsBuilt for clean, controlled daily bassAvailable in Dual 2 Ohm and Dual 4 Ohm configurations ENGINEERED FOR COMPACT OUTPUT The AA 2.75 8” is ideal for systems where space is limited but performance still matters. Its compact frame, upgraded motor structure, and high-excursion suspension allow it to deliver strong low-frequency output without requiring the enclosure space of a larger subwoofer. From under-seat truck applications to compact daily builds, the AA 2.75 8” gives installers and enthusiasts a serious small-format driver with the control, durability, and output needed for real aftermarket bass.
$169.00
-
Sparked Innovations Sparked Innovations 15" SQL-2000 Car Audio Subwoofer 2000W DVC
Built upon the proven, World-Class, performance of The Bass Blaster, the SQL-2000 sets itself among some of the best sounding, most versatile, and durable woofers in it's class.  The four (4) inch copper coil comes immersed in a Jacob Fuller designed motor assembly complete with aluminum shorting pole cap, flared velocity heat-vents, and plenty of ferrite in it's dual 9.25"" diameter slugs which gives it one of the highest motor forces in a woofer of it's size.  New styling gives the SQL-2000 a sleek look. A molded rubber magnet boot, laser engraved and polished backplate, and heavy aluminum dust cap add to the modern aesthetics and a classy style that's sure to blend well with almost any install.  General Specifications Power handling 2000W RMS Dual voice coil D2 or D4 Xmax (mm one way) 25 Xmech (mm one way)  50 Heat-treated 4-layer 4-inch coil Quad braided tinsel leads Multi-layer foam surround in Sparked Blue Aluminum dust cap Cast aluminum frame High-velocity motor cooling Measurements Parameter Metric (mm) Imperial (in) Outer Diameter 389.90 15.35 Mounting Diameter 355.60 14.00 Overall Depth 273.80 10.78 Mounting Depth 243.84 9.60 T/S Parameters Parameter D2 D4 RE (Ohms) 3.88 5.97 Fs (Hz) 28.52 29.72 VAS (L) 33.36 32.02 Qes 0.61 0.69 Qms 6.50 6.97 Qts 0.56 0.63 BL 30.74 35.98 Mms (Grams) 830.92 797.52 Cms (uM/N) 37.50 35.95 Sensitivity (dB @2.83Vrms/1m) 85.91 @ 1 kHz 83.90 @ 1 kHz
$469.99
-
AUDIO ACE WILD 15" DUAL 4 OHM SUBWOOFER
Product Overview: The Reborn Crowd Favorite The Audio Ace Wild 15" D4 is the reborn crowd favorite, perfectly balancing performance between the Joker and Jester subwoofer models. Conservatively rated at 2,000W RMS, the Wild is built for durability and high output, featuring a heavy-duty bolted spider ring, a tried-and-true 6-spoke basket, a high-temperature 3-inch coil, and a durable ribbed surround. Its large 252 oz motor ensures excellent control. The Dual 4 Ohm impedance provides flexible wiring for a 2 Ohm or 8 Ohm final load. Designed to be Sealed, Ported, 4th order, and 6th order friendly, the Wild 15 is a versatile choice for any powerful bass system. AUDIO ACE WILD 15" DUAL 4 OHM SPECIFICATIONS Model Wild 15" RMS Power Handling (Conservative) 2,000 Watts Nominal Impedance Dual 4 Ohm (D4) Voice Coil 3" High Temp Coil Motor Weight 252 oz Basket Tried and True 6 Spoke Suspension Heavy Duty Bolted Spider Ring, Durable Ribbed Surround Outer Diameter 15.551 in Cutout Diameter 14.17 in Mounting Depth 8.98 in LOSS FACTORS & MISC PARAMETERS Total Q (Qts) 0.482 Mechanical Q (Qms) 4.370 Electrical Q (Qes) 0.541 Free Air Resonance (Fs) 28.5 Hz Sensitivity (Lm) 86.18 dB Equivalent Volume (Vas) 60.4938 L Moving Mass (Mms) 488.548 g BL Factor (Bl) 32.413 DC Resistance (Re) 6.49 Ohms Effective Piston Area (Sd) 819.40
$399.00
-
AUDIO ACE REBELLION 15" DUAL 1 OHM SUBWOOFER
Product Overview: Audio Ace's Versatile 4,000W 15-Inch Driver The Audio Ace Rebellion 15" D1 is a high-power subwoofer designed to excel in both Sound Quality (SQ) and sheer output (SPL). Rated at a massive 4,000W RMS, this 15-inch driver is built with a low Free Air Resonance (Fs) of 27 Hz and a strong 498 oz motor structure, making it highly versatile for great sound across various music styles. It features a 4-inch voice coil and a substantial linear excursion (Xmax) of 25mm each way. The Dual 1 Ohm impedance is perfect for high-current amplifier setups, allowing for an ultra-low 0.5 Ohm final impedance when wired in parallel. Choose the Rebellion for EXTREME sound levels whether you are competing or enjoying powerful daily bass. AUDIO ACE REBELLION 15" DUAL 1 OHM SPECIFICATIONS Model Rebellion 15" Nominal Impedance Dual 1 Ohm (D1) RMS Power Handling 4,000 Watts Voice Coil 4 Inch D1 Motor Weight 498 oz Maximum Excursion (Xmax) 25mm Each Way THIELE-SMALL PARAMETERS Sensitivity (SPL) 87 dB Electrical Q (Qes) 0.591 Mechanical Q (Qms) 7.124 Total Q (Qts) 0.546 Resonance Frequency (Fs) 27 Hz Effective Piston Area (SD) 730.62 DC Resistance (Re) 1 + 1 Ohms BL Factor (BL) 28.471
$949.99 $849.00
-
RESILIENT SOUNDS PLATINUM V2 15" DUAL 1 OHM (D1) SUBWOOFER
The Ultimate Low-Impedance Subwoofer for Extreme Systems The Resilient Sounds PLATINUM V2 15" D1 is the choice for serious bass enthusiasts and competitors seeking to run ultra-low impedance loads. Built to handle a conservative 2,500W RMS, this 15-inch driver is optimized for maximum thermal and magnetic performance with its 13% larger motor and 20% longer 3-inch 8-layer voice coil. The Dual 1 Ohm impedance allows for wiring in parallel to achieve an extremely low 0.5 Ohm final load, unlocking the full potential of 0.5 Ohm-stable competition-grade amplifiers. The combination of 35mm XMAX, carbon fiber cone, and heavy-duty suspension ensures this subwoofer moves huge amounts of air with unmatched authority and control. TECHNICAL SPECIFICATIONS Specification Detail Model Platinum 15 V2 Nominal Impedance Dual 1 Ohm (D1) RMS Power Handling (Conservative) 2,500 Watts Peak Power Handling 5,000 Watts Maximum Excursion (XMAX) 35MM Voice Coil 3-inch 8 Layer (20% Longer than V1) Motor Structure 13% Larger Motor, XL Triple Stacked Cone / Dust Cap Carbon Fiber Surround New High Roll Tooled Surround Spider / Leads 10" Spider Pack with Insulated Dual Leads Frame/Basket Cast Aluminum Frame RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 2.5 - 3.5 CU FT Tuning Frequency 28 - 33 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 11.25 INCHES Cutout Diameter 14.2363 INCHES Displacement 0.28 CUBIC FT
$699.99
-
RESILIENT SOUNDS GOLD V2 15" DUAL 2 OHM (D2) SUBWOOFER
Unleash Deep Bass Power with the Resilient Sounds The Resilient Sounds GOLD V2 15" D2 is designed to maximize output from amplifiers rated for 1 Ohm stability. Sharing the robust foundation of the GOLD V2 line, it handles a conservative 1500W RMS and features an advanced motor assembly, including a 3-inch 4-layer voice coil and 31mm of linear excursion (XMAX). This subwoofer is engineered for those who prioritize massive bass output and require a low-impedance setup. The Dual 2 Ohm voice coil configuration makes it perfectly suited for wiring two woofers to a 1 Ohm final load or a single woofer to a 4 Ohm load, offering unparalleled flexibility in high-power car audio systems. TECHNICAL SPECIFICATIONS Specification Detail Model Gold V2 15" Nominal Impedance Dual 2 Ohm (D2) RMS Power Handling (Conservative) 1500 Watts Maximum Excursion (XMAX) 31MM Voice Coil 3-inch 4 Layer (25% Longer than V1) Motor Structure Triple Stack 220mm Motor with Venting (15% Larger than V1), Engraved Bottom Plate, Molded Motor Boot Surround / Spider NEW High Roll Tooled Surround, 10" Spider Pack with Dual Sewn Leads Frame/Basket Cast Aluminum Frame Terminals 4 Ga Push Terminals Gasket Aluminum Gasket Shorting Ring Aluminum Available Sizes 10", 12", 15", and 18" RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 2.25 - 3.25 CU FT Tuning Frequency 28 - 32 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 10.375 INCHES Cutout Diameter 14.2363 INCHES Displacement 0.24 CU FT Outside Diameter 15 7/32 INCHES
$459.99
-
RESILIENT SOUNDS GOLD V2 15" DUAL 4 OHM (D4) SUBWOOFER
Compact Power with Uncompromised Performance The Resilient Sounds GOLD V2 15" D4 subwoofer delivers the same legendary power handling and excursion capabilities of its larger sibling in a more compact size, making it perfect for tighter installations. Conservatively rated at 1500W RMS, this woofer features a robust, triple-stacked 220mm motor structure and an extended 3-inch 4-layer voice coil, ensuring durability and high output under extreme demand. The Dual 4 Ohm voice coil allows for versatile system wiring to achieve a final 2 Ohm or 8 Ohm load, providing excellent flexibility for high-current mono amplifiers. With 31mm of XMAX and a high-roll surround, the GOLD V2 15" is built to move massive amounts of air with precision. TECHNICAL SPECIFICATIONS Specification Detail Model Gold V2 15" Nominal Impedance Dual 4 Ohm (D4) RMS Power Handling (Conservative) 1500 Watts Maximum Excursion (XMAX) 31MM Voice Coil 3-inch 4 Layer (25% Longer than V1) Motor Structure Triple Stack 220mm Motor with Venting (15% Larger than V1), Engraved Bottom Plate, Molded Motor Boot Surround / Spider NEW High Roll Tooled Surround, 10" Spider Pack with Dual Sewn Leads Frame/Basket Cast Aluminum Frame Terminals 4 Ga Push Terminals Gasket Aluminum Gasket Shorting Ring Aluminum Available Sizes 10", 12", 15", and 18" RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 2.25 - 3.25 CU FT Tuning Frequency 28 - 32 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 10.375 INCHES Cutout Diameter 14.2363 INCHES Displacement 0.24 CU FT Outside Diameter 15 7/32 INCHES
$459.99
-
Sundown Audio U-Series v.2 15" Subwoofer
2000 Watts RMS / 4000 Watts Peak Dual 2 or 4 ohm voice coils Optimized for small ported or bandpass enclosures Aluminum 3” voice coil former for superior heat dissipation High-temperature copper voice coil Double stitched surround Heavy-duty cast basket Spring-loaded terminals accept up to 8-gauge wire Stitched-on heavy-duty tinsel leads Solid pole with vent channels and aluminum shorting ring cap Rear gap-venting Top-Plate Cooling Channels Designed to be at home in the competition lanes or playing your favorite music, the U Series is the premier “standard suspension” woofer in the Sundown lineup. A double-stacked 9.4-inch wide ferrite magnet system is coupled to a thick top plate. A thick set of shorting rings are used inside the magnets and on the pole cap, smoothing out frequency response while doubling as a heat sink and airflow guide. A custom aluminum frame was designed specifically for the U Series. It’s substantially thicker and equipped with heat dissipation ribs at the bottom of the frame. The U v.2 motor also features an extended pole piece to keep the coil under perfect control under high stress. The coil temperature is controlled with machined, high-velocity pole channels and a series of 16 direct air-gap vents in the back plate. Dimensions
$669.99
-
Clearance Deals McLaren Audio M8-15D2 15" 800 Watt Dual 2 Ohm Car Audio Subwoofer/Sub M815D2
McLaren Sound M8-15D2 15″ Car Audio Subwoofer Hear the Difference, Feel the Difference 800W/1600W Dual 2 Ohm Subwoofer 15" Subwoofer Authorized Dealer Description D2 D4 FS (Hz) 26.97 29.27 Re (ohm) 4 7 Sensitivity (dB) 87.49 87.13 Vas (L) 108.62 93.44 Qes 0.61 0.73 Qms 3.24 2.86 Qts 0.51 0.58 MMs (grams) 308.1 303.99 Cms (mm/N) 0.113 0.097 Bl 18.58 23.27 Sd (cm2) 830 830 Cutout Diameter (in) 14.75 14.75 Mounting Depth (in) 7.875 7.875
$299.95 $199.99
-
Kicker Kicker 44L7S154 15" 2000W Dual-4-Ohm L7 Car Audio Subwoofer/Sub Solobaric L7S
15" Solo-Baric L7 4 Ohm The KICKER® Solo-Baric® L7S™ boasts massive power handling and more cone area than any circular sub. You move more air, so you get more bass. Square Matters The heavy-duty motor structure includes a large-diameter spider for less flex, longer life and superior accuracy. High-temp voice coil wire winding completes a powerful Comp motor that makes the most of every watt you give it. Features: Dual Four-Ohm Voice Coils Injection-Molded Polypropylene Cone Patented Corner Ribs Minimize Distortion SoloKon™ 360-Degree Back Bracing Ribbed Santoprene Surround With Blue Surround Stitching UniPlate™ Back Plate And Pole Piece, Plus Perimeter Venting For Excellent Thermal Management Thick Tinsel Leads Large Ceramic Magnet Cast Aluminum Basket Satin-Nickel Plated, Spring-Loaded Speaker Terminals Fresh Water Bump The materials used in the L7S series makes them a perfect choice for adding some bass to your boat.* *Extreme durability in fresh-water applications only (not recommended for salt water) Specifications Thiele/Small Parameters 44L7S154 T/S Parameters PDF Size (IN.,CM) 15, 38.1 Impedance (OHMS) 4 DVC Max Rec Amplifier Power (WATTS PEAK/RMS)* 2000/1000 Sensitivity (dB 1w/1m) 89.4 Frequency Response (Hz) 18-100 Mounting Depth (IN.,CM) 8-11/16, 22.1 Mounting Cutout, Square (IN.,CM) 13-3/4, 34.9 Min Rec Sealed Box Volume (CU. FT., Liters) 2.0, 56.64 Max Rec Sealed Box Volume (CU. FT., Liters) 6.0, 169.9 Min Rec Vented Box Volume (CU. Ft., Liters)** 3.0, 85.0 Max Rec Vented Box Volume (CU. Ft., Liters)** 6.0, 169.9 What's in the box? one 15-inch subwoofer, one owner's manual, two stickers *Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details. **Port Volume Excluded. Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.
$509.99 $479.99
-
Kicker Kicker 10CVX154 15" 2000W Dual 4 Ohm Car Subwoofer/Sub CVX154 CVX CompVX
Subwoofer Features: 15" Dual 4 Ohm CompVX (CVX) Subwoofer The most advanced and powerful round subwoofer from Kicker! The round equivalent of the Kicker Solo-Baric L7 subwoofer Power Handling: Peak: 2000 watts RMS: 1000 watts Recommended power range: 600 - 1000 watts RMS Impedance: Dual 4 Ohm Improved injection-molded SoloKon cone Ribbed Santoprene surround Ultra strong adhesive and a stitched surround ensure the cone and surround do not separate 360-Degree back bracing, along with the SoloKon cone produce zero distortion Cast aluminum basket is designed with perimeter venting around the voice coil T-cut top plate along the motor structure results in stronger bass, as well as better sound Excellent heat dissipation from the solid pole piece and the aluminum basket Solid pole piece also assists in the playing of a larger range of low frequencies Aluminum basket is non-ferrous and does not effect the strength of the magnet Poly-cotton, semi-progressive-roll spider Spiralead tinsel leads woven into the spider Spring loaded push terminals are compatible with up to 10 AWG wire High temperature voice coil Large, powerful magnet Frequency response: 18-500 Hz Sensitivity: 91.6 dB Mounting depth: 8-1/2"
$249.99
-
Kicker Kicker 44CVX152 15" 1500W Dual-2-Ohm CompVX CVX Subwoofer/Sub CVX15
15" CompVX 2 Ohm The KICKER® CompVX™ features cutting-edge technology for truly musical, distortion-free bass. 15" CompVX 2 Ohm High-temp dual voice coils deliver the power, while a solid pole piece provides more mass to subdue additional heat. A T-cut top plate creates a wider magnetic field for stronger bass response, and better sound. It all comes together to form a super-reliable motor structure found only in a KICKER subwoofer. Features: Dual Two-Ohm Voice Coils Thick Polypropylene Cone Signature Double Blue Surround Stitching Ribbed Santoprene® Surround SoloKon™ Cone Reinforcement Oversized Suspension System High-Strength Insulated Tinsel Leads High Temp Voice Coil Perimeter Venting for Thermal Management Massive Ceramic Magnet UniPlate™ Extended Pole Piece & Backplate For Superior Heat Dissipation Cast Aluminum Basket Satin Nickel Spring-Loaded Speaker Terminals Want setup help? Go to KICKERU for a free woofer & amplifier configuration app! *The CompVX 15-Inch Subwoofer works best with a sealed or ported enclosure and 1000 watts of recommended power. See below for more details. Specifications Thiele/Small Parameters 44CVX152 T/S Parameters PDF Size (IN.,CM) 15, 38 Impedance (OHMS) 2 DVC Max Rec Amplifier Power (WATTS PEAK/RMS)* 2000/1000 Sensitivity (dB 1w/1m) 91.6 Frequency Response (Hz) 18-500 Mounting Depth (in, cm) 8-1/2, 21.5 Mounting Cutout (in, cm) 13-13/16, 35 Min Sealed Box Vol (cu. ft, L) 1.8, 51.0 Max Sealed Box Vol (cu. ft, L) 5.2, 147.0 Min Vented Box Vol (cu. ft, L) 3.0, 85.0 Max Vented Box Vol (cu. ft, L) 5.0, 142.0 What's in the box? one 15-inch subwoofer, one owner's manual, two stickers *Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details. **Port Volume Excluded. Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.
$399.95 $249.99
-
Kicker Kicker 44CVX154 15" 1500W Dual-4-Ohm CompVX CVX Subwoofer/Sub CVX15
15" CompVX 4 Ohm The KICKER® CompVX™ features next-level materials and heat management technology for clear, pounding bass that lasts. 15" CompVX 4 Ohm The CompVX stands alone among round subwoofers, using technologies found in the Solo-Baric® L7S like the one-piece SoloKon™ cone with vented back bracing for ultra-rigidity and a cool motor. Features: Dual Four-Ohm Voice Coils Thick Polypropylene Cone Signature Double Blue Surround Stitching Ribbed Santoprene® Surround SoloKon™ Cone Reinforcement Oversized Suspension System High-Strength Insulated Tinsel Leads High Temp Voice Coil Perimeter Venting for Thermal Management Massive Ceramic Magnet UniPlate™ Extended Pole Piece & Backplate For Superior Heat Dissipation Cast Aluminum Basket Satin Nickel Spring-Loaded Speaker Terminals Want setup help? Go to KICKERU for a free woofer & amplifier configuration app! *The CompVX 15-Inch Subwoofer works best with a sealed or ported enclosure and 1000 watts of recommended power. See below for more details. Specifications Thiele/Small Parameters 44CVX154 T/S Parameters PDF Size (IN.,CM) 15, 38 Impedance (OHMS) 4 DVC Max Rec Amplifier Power (WATTS PEAK/RMS)* 2000/1000 Sensitivity (dB 1w/1m) 91.6 Frequency Response (Hz) 18-500 Mounting Depth (in, cm) 8-1/2, 21.5 Mounting Cutout (in, cm) 13-13/16, 35 Min Sealed Box Vol (cu. ft, L) 1.8, 51.0 Max Sealed Box Vol (cu. ft, L) 5.2, 147.0 Min Vented Box Vol (cu. ft, L) 3.0, 85.0 Max Vented Box Vol (cu. ft, L) 5.0, 142.0 What's in the box? one 15-inch subwoofer, one owner's manual, two stickers *Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details. **Port Volume Excluded. Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.
$399.95 $249.99
-
Sundown Audio M-Series M15 2000W Subwoofer
2000 Watts RMS / 4000 Watts Peak Available in Dual 1 and Dual 2 Ohm Configurations Mega Roll Surround and Frame Etched All Black Backplate Quad Stack Magnet Structure The Sundown M-Series is an all-new "entry-level" subwoofer in our Mega series - all Mega series subwoofers (10,12,15,18) feature our custom tooled and patented frames (US Patent Numbers D691596, D691597, D691598, and D741841) and our Mega-Roll surround.When we say "entry-level" this is only by comparison to its big brothers in our own Mega line - X,Z,NS series and higher. The M series was built for intense bass with stellar low-frequency performance at industry-leading levels of low-distortion. It does this while looking amazing - with a new laser-etched back-plate design and special M-series magnet boot design.For the M-series we mate out Mega series frames to a quad stacked 200mm (7.87”) diameter motor structure with a total magnet stack height of 88mm (3.46”) featuring a hyper-extended pole and extreme clearances (allowing 59.5mm to mechanical bottom effectively making it bottomless - this is 4.68" peak-to-peak). At Sundown we always do things to the extreme so even our "entry" level M-series features a full 20mm thick top-plate to finish the efficient magnetic circuit. We did all of this while still optimizing the cost to offer the absolute best-value to our customers.This motor drives a 3" diameter 4-Layer Round Wire Aluminum Voice Coil wound on a thick aluminum former to incredible levels of excursion. The new coil in the M-series was developed for both the M and X v.4 series and features a very special winding (invented by Sundown for the X-8 series originally) that allows the best winding packing density in the gap for both the D1 and D2 options. This coil is so massive that it allows even our M-series to achieve a full 35mm one-way linear excursion. We are truly setting a new industry standard with the M-series.Based on Sundown's years of experience we've included our highly efficient high-stroke coil ventilation system developed for the X and Z series originally. The M-series features a high-velocity pole vent, a heavily vented magnetic gap through the back-plate, and our proprietary high-velocity cast-aluminum frame-base venting system.The M-series was designed from the ground-up to become the new standard in the low-frequency / small, ported box subwoofer category in this price range. Never before have we been able to offer such an incredible value in the Mega series. They will work in the same enclosure as our other Mega platform subwoofers, but the M-series also opens up the possibility for sealed and IB applications. This is something that was not well suited to any other previous Mega platform subwoofer.The M-series is really a different kind of woofer due to its incredibly linear suspension. They are designed for the LOWEST level of bass extension possible in a small enclosure while maintaining extremely low levels of distortion. This is all thanks to the Sundown Mega-Roll surround & proprietary Sundown PG linear suspension (fully computer optimized). As with most subwoofers from Sundown the M-series features a magnet inner-diameter aluminum shorting ring for superior inductive distortion performance as well.We are quite certain that the M-series will go down in car audio history as one of the best low-distortion subwoofers per-dollar of its time.
$659.99
-
Sundown Audio Sundown Audio SA-Series v.2 15" Subwoofer
1250 Watts RMS / 2500 Watts Peak Dual 2 or 4 ohm voice coils Vented magnetic gap & pole piece Aluminum 2.75” voice coil former for superior heat dissipation Innovative high velocity, cast aluminum vented frame spacer ring Magnet ID faraday ring for smooth acoustic response High-temperature copper voice coil wire Spring-loaded terminals Stitched-on double “XL” tinsel leads This SA-10/12/15 v.2 series is a top-down upgrade from the original SA series. The 2.75” coil punches way above its weight, outperforming many 3” coils without the adding weight & with the added advantage of a wider spider. We are able to perfectly balance the mass, motor force, and suspension stiffness for the intended power level.The motor also features a large magnet shorting ring (faraday ring) to reduce distortion and deliver smoother response across the entire acoustic spectrum. The motor & coil setup is mated to an extremely robust multi-layer spider with fully tied-on & doubled-up “XL” tinsel leads. A competition-grade paper cone, strong foam surround, and cast aluminum frame are used to complete this masterpiece. On top of the ~19mm of one-way linear excursion we have an x-mech limit of 37mm one-way before coil bottom making it nearly "bottomless."The 18" model features a larger diameter motor to drive the higher mass. Enclosure Designs .Zip File
$409.99
-
Sundown Audio Ampere Audio AA-2.75 Series 15"/18" Car Subwoofer Recone
1000W RMS DVC Premium Subwoofer ReconePlease note: Includes a Blank Dustcap Built for serious SPL setups and bass heads who demand more, the Ampere Audio AA-2.75 RVE Series car subwoofer delivers powerful, clean low-end with up to 1000W RMS of relentless output. As one of the most rugged car audio components on the market, this sub is available in both 15 inch car subwoofers and 18″ sizes, featuring dual 2Ω or 4Ω voice coils for flexible wiring. Its massive 2.75″ high-temp aluminum voice coil, stitched XL tinsel leads, and vented motor structure make it a go-to car audio solution for SPL competitors and high-output daily drivers. A cast aluminum frame ensures strength under pressure, while a large Faraday ring minimizes distortion during heavy bass drops. Whether you're upgrading your system or building a wall, the AA-2.75 is a high-performance car subwoofer designed to dominate. Push limits, hit harder, and feel every beat—this is next-level bass.
$134.99 - $149.99
-
Sundown Audio Compact Neo V3 15" Subwoofer
Neodymium motor creates Sundown's highest motor force - as strong as a 2,000 oz. ferrite motor! 3,500-watt recommended amplifier power Large shorting rings for extremely smooth response Megaroll technology for extremely linear cone travel and low-end extension Cross-cut pole for lowered distortion, improved thermal control, and higher efficiency Heavy-duty cast basket Spring-loaded terminals accept up to 4-gauge wire Stitched-on heavy-duty tinsel leads Solid pole with vent channels and aluminum shorting ring cap Top-plate cooling channels THREE OPTIONS AVAILABLE MUSIC All-around performance Patented Sundown frame Increased airflow for additional cooling Larger, highly linear spider Most Throw/X-Max MUSICAL SPL Higher musical output U-series frame Direct compression cooling Higher Efficiency SPL Extreme output (burp) U-series frame Direct compression cooling Custom cone, coil and progressive suspension configurations available. Standard 3,500-watt rating. RMS may change with custom configuration. Lightweight and incredibly powerful, the Compact Neo V.3 is the perfect combination of musicality and sheer, unrelenting motor force. Using Sundown's patented platform, the Compact features an extended pole piece with a thick shorting ring, plus a custom cross-cut pole piece with a Neodymium cap for increased output and thermal control. The solid, high-velocity pole piece uses CNC cross-cut channel cooling, a series of 16 direct air-gap vents in the back plate to keep the motor even cooler, and a vented top plate/gap.
$1,499.99 - $1,799.99
-
Sundown Audio Sundown Audio SDDN 15" Limited Edition Competition Subwoofer
3,500 watts RMS Available in 10 through 18-inch versions Dual 1 ohm coils Mega V2 Cone Aluminum 3.3” x 80mm coil Dual 8 AWG terminals with dual-layer tinsel leads Custom cross-cut pole piece with Neodymium cap for increased output and thermal control 5-layer spider 1,336 oz (83.5 lbs) magnet with integrated thermal ventilation Optimized for Ported & 6th order enclosures Carbon cone upgrade available Designed in-house by Sundown Founder Jacob Fuller, the 3,500-watt RMS SDDN is available in 10, 12, 15, and 18-inch models. Each unit boasts a massive 83-pound motor with integrated thermal ventilation, featuring a custom cross-cut pole piece with a Neodymium cap for increased output and thermal control. Sundown’s signature Mega V2 cone is paired with a five-layer spider, a 3.3” x 80mm aluminum voice coil (dual 1-ohm), and dual tinsel leads per eight-gauge terminal.
$1,399.99
