ALL Products Minus B-Stock
-
Mechman Alternators Mechman 240 Amp High Output Alternator For 91-05 Ford Explorer/Ranger/Bronco
*Most alternators are custom built to order. Standard build time is 10-14 days.* Based on late model, large case hairpin stator technology, the tried-and-true E series of alternators have incredible output at idle. Reasonably priced and very durable, these units feature twin custom rectifiers and 12 huge diodes for great durability, and use the stock length belt in most applications. You won't find a better T-mount Ford alternator anywhere!! This unit includes the necessary adapter harness so the stock alternator harness plugs right in. Fitment Guide: Name Model Engine Year(s) Amperage FORD Bronco 5.0 or 5.8 93-96 240a FORD E-Series Van 4.2 97-03 240a FORD Explorer 4.0 OHV 91-01 240a FORD F-151 4.2 97-04 240a FORD F-159 5.0 93-96 240a FORD F-164 5.8 93-96 240a FORD Ranger 2.3 92-97 240a FORD Ranger 2.5 98-01 240a FORD Ranger 3.0 94-05 240a MAZDA B2500 2.5 98-01 240a MAZDA B3000 3.0 94-05 240a
$419.00
-
Mechman Alternators Mechman 250A Alternator For 05-13 Volkswagen Rabbit/Jetta/Beetle 2.5L
*Most alternators are custom built to order. Standard build time is 10-14 days.* The 250 amp Elite series alternator offers the highest possible durability available in a large case alternator. 6 phase technology combined with massive twin rectifier assemblies and 12 diodes makes these alternators totally durable for daily use, while still maintaining 160+ amps at engine idle speeds. MechMan alternators for advertised VW applications use the stock length drive belt. NOTE: The technical drawing for this alternator shows a 6 groove pulley. This part number will ship with a 5 groove pulley so that it fits the applications it is advertised for. This is also the reason why a 370 amp version is not offered- a 5 rib belt starts to slip on the alternator pulley at anything above about 275 amps output. Name Model Engine Year(s) Amperage VOLKSWAGEN Beetle 2.5 06-13 250a VOLKSWAGEN Jetta 2.5 05-13 250a VOLKSWAGEN Rabbit 2.5 06-09 250a
$499.00
-
Mechman Alternators Mechman 240 Amp Alternator For 98-05 Lexus GS / IS300 3.0
*Most alternators are custom built to order. Standard build time is 10-14 days.* The S series of 6 phase alternators offers incredible output in a compact and durable package. Highly efficient, these units use less horsepower per Kw of power produced than conventional 3 phase alternators. 12 diodes, twin rectifier plates and outstanding airflow ensure long service life, even in severe conditions. The 240 amp model offers the best balance between peak output, and output at engine idle RPM. Fitment Guide: Make Model Engine Size Year Lexus GS300 3.0L 1998 - 2005 Lexus IS300 3.0L 2001 - 2005
$419.00
-
Mechman Alternators Mechman 370 Amp Alternator For 99-07 Ford Powerstroke 6.0/7.3
E Series The Elite series offers the highest possible amperage and durability available in a large case alternator. 6 phase technology combined with massive twin rectifier assemblies and 12 diodes makes these alternators totally durable for daily use, while still maintaining 200+ amps at engine idle speeds. Installation Notes: Fitment Guide: Make Model Engine Size Year Ford Excursion 6.0L Diesel 2003 - 2005 Ford Excursion 7.3L Diesel 2000 - 2003 Ford Super Duty 6.0 Diesel 2003 - 2007 Ford Super Duty 7.3L Diesel 1999 - 2003
$599.00
-
DC Audio DC Audio DC61-2 300W 6.5" Component SQ Speakers w/ Mids+Tweeters+Wave Guides
DC Audio’s New Convertible, High-performance Speaker Line. These New Speakers from DC Audio can be mounted as a coaxial speaker in most standard 6.5” speaker holes OR you can remove the tweeter and pole from the center of the speaker, install the wave guide and mount the tweeter anywhere you want using the supplied flush or angle tweeter cups making them a versatile speaker system that will do just about anything you need. Speakers are considered SQ Speakers, when you’re looking for a speaker capable of extreme sound quality as well as output look no further than the DC Audio 61-2 Sets include 2 Mids / 2 Tweeters / 2 Wave Guides / 2 Flush Tweeter Mounts / 2 Angle Tweeter mounts. 20mm soft-dome tweeters. High performance polypropylene tweeter crossover capacitors. Tweeter Protection. Specifications ⦁ POWER HANDLING RMS 75 watts ⦁ POWER HANDLING PEAK 150 watts ⦁ IMPEDANCE 4 Ohm ⦁ CROSSOVER POINT 65 Hz ⦁ FREQUENCY RESPONSE +/- 10DB 55Hz - 22,000Hz ⦁ Diameter 6.5” speaker size ⦁ Mounting Depth 2.50" Speaker Features ⦁ Rubber inverted Surround ⦁ Silk Dome Tweeter ⦁ Water Resistant Paper Cones ⦁ Coaxil or Component installtions ⦁ lots of mounting options ⦁ built in tweeter crossover cap ⦁ built in wattage tweeter protection
$239.99
-
Power Acoustik Power Acoustik MCD-51B Single DIN Marine CD/MP3/USB/Bluetooth Stereo/Receiver
MCD-51B Single DIN Marine CD Player w/ 32GB USB Playback & Bluetooth 2.0 Bluetooth 2.0 Phone Calling & A2DP Audio Streaming Media Playback from CD, USB/SD & Aux Theft Deterrent Detachable Faceplate Remote Control & Faceplate Case Included
$61.95
-
Kicker Kicker 45KM124 12" 350W 4-Ohm Marine/Powersports/Boat Subwoofer/Sub KM12
12" 4Ω Marine Subwoofer The KICKER® KM 12-inch Marine Subwoofer makes serious bass in a sealed or ported enclosure. Made to take the power and the weather, this sub is custom made to bump in your boat. SHOCK WAVES Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KM Series of subs. FEATURES Four-Ohm Voice Coil Injection-Molded Polypropylene Cone Co-molded Santoprene® Surround UniPlate™ Back Plate And Pole Piece Thick Tinsel Leads Large Ceramic Magnet Polymer Basket Resists Corrosion Protective Terminal Cap Stainless Mounting Hardware Included Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure (ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test) Want setup help? Go to KICKERU for a free woofer and amplifier configuration app! *The KM 12-inch Subwoofer works best with a sealed or ported enclosure and 175 watts of recommended power. See below for more details. Specifications Thiele/Small Parameters Woofer(in,mm) 12, 30 Impedance (OHMS) 4 SVC Peak Power (watts, per ANSI/CTA-2031-A) 350 Recommended Amplifier Power (watts RMS) 175 Sealed Enclosure Volume Min-Max(ft³, L) 1.25-3.5, 25.4-99.1 Vented Enclosure Volume Min-Max(ft³, L) 1.75-2.25, 49.6-63.7 Frequency Response(Hz) 30-500 Mounting Depth(in, cm) 5.5, 13.9 Hole Diameter(in, cm) 11, 27.9 Outer Diameter(in, cm) 13, 32.95 What's in the Box: 1 - 12" Woofer 1 - Back gasket 8 - Mounting screws 8 - Mounting screw clips 1 - Manual
$279.99 $249.99
-
Kicker Kicker 45KM104 10" 350W 4-Ohm Marine/Powersports/Boat Subwoofer/Sub KM10
10" 4Ω Marine Subwoofer The KICKER® KM 10-inch Marine Subwoofer makes serious bass in a sealed or ported enclosure. Made to take the power and the weather, this sub is custom made to bump in your boat. SHOCK WAVES Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KM Series of subs. FEATURES Four-Ohm Voice Coil Injection-Molded Polypropylene Cone Co-molded Santoprene® Surround UniPlate™ Back Plate And Pole Piece Thick Tinsel Leads Large Ceramic Magnet Polymer Basket Resists Corrosion Protective Terminal Cap Stainless Mounting Hardware Included Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure (ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test) Want setup help? Go to KICKERU for a free woofer and amplifier configuration app! *The KM 10-inch Subwoofer works best with a sealed or ported enclosure and 175 watts of recommended power. See below for more details. Specifications Woofer(in,mm) 10, 25 Impedance (OHMS) 4 SVC Peak Power (watts, per ANSI/CTA-2031-A) 350 Recommended Amplifier Power (watts RMS) 175 Sealed Enclosure Volume Min-Max(ft³, L) 1-2.4, 28.3-68 Vented Enclosure Volume Min-Max(ft³, L) 1.25-1.75, 35.4-49.6 Frequency Response(Hz) 30-500 Mounting Depth(in, cm) 5, 12.7 Hole Diameter(in, cm) 9-3/16, 23.2 Outer Diameter(in, cm) 10-11/16, 27.1 What's in the Box: 1 - 10" Woofer 1 - Back gasket 8 - Mounting screws 8 - Mounting screw clips 1 - Manual -->
$219.99 $199.99
-
Clearance Deals McLaren Audio M8-15D4 15" 800 Watt Dual 4 Ohm Car Audio Subwoofer/Sub M815D4
McLaren Sound M8-15D2 15″ Car Audio Subwoofer Hear the Difference, Feel the Difference 800W/1600W Dual 4 Ohm Subwoofer 15" Subwoofer Authorized Dealer Description D2 D4 FS (Hz) 26.97 29.27 Re (ohm) 4 7 Sensitivity (dB) 87.49 87.13 Vas (L) 108.62 93.44 Qes 0.61 0.73 Qms 3.24 2.86 Qts 0.51 0.58 MMs (grams) 308.1 303.99 Cms (mm/N) 0.113 0.097 Bl 18.58 23.27 Sd (cm2) 830 830 Cutout Diameter (in) 14.75 14.75 Mounting Depth (in) 7.875 7.875
$299.95 $199.99
-
Kicker Kicker 45KM84L 8" 300W Seven-Color-LED Marine/Powersports Speakers KM KM84
KM 8" 4Ω LED Coaxial Loud and clear, the KM Coaxial Marine Speakers are built to pump out the tunes – and the fun - for years to come! Whether you mount your speakers in the hull or in KICKER® tower enclosures, you also get a pair of stout marine-grade grilles! LIGHT IT UP Our speakers are made to thrive in the water. UV treatments on injection-molded cones, Santoprene® surrounds, baskets and grilles all help maintain top-shelf performance. KM speakers will endure almost any weather conditions with splash-and-spray-resistant sealed motors, cones and Locking/Sealed Terminal Covers. Speaker hardware is forged from rustproof, 316L stainless-steel. Four-Ohm Voice Coil One-Inch Titanium Tweeter UV-Treated Polypropylene Woofer With Santoprene® Surround UV-Resistant Polymer Basket Locking/Sealed Terminal Cover Sealed Motor Structure 316L Stainless Mounting Hardware Included White and Charcoal Grilles With Seven-Color LED System Included* Meets or Exceeds ASTM Standards for UV** and Salt/Fog Exposure*** **ASTM B117 200 hr. Salt Fog Test ***ASTM G154 400 hr. Accelerated UV Test *Upgradable to 20 Colors and 19 Lighting Modes with KMLC This KM Eight-Inch Coaxial Speaker works best with 150 watts of recommended power. Specifications Woofer(in,mm) 8, 200 Tweeter(in,mm) 1, 25 Tweeter Dome Material Titanium Rated Impedance(Ω) 4 Peak Power Handling(Watts) 300 Continuous Power Handling(Watts RMS) 150 Sensitivity(1W,1m) 92 Frequency Response(Hz) 30-21k Mounting Hole Diameter(in,mm) 6-9/16, 170 Mounting Depth(in,mm) 3-5/16, 82.9 LED Lighting Yes Grilles Charcoal and White What's in the Box: 2 - 8" 4Ω Coaxials 8 - Mounting Screws 8 - Mounting Screw Clips 2 - Wire Connection Cover 2 Zip Ties
$289.99 $259.99
-
Kicker Kicker 45KM654L 390W 4-Ohm 6.5" 6-1/2 Coaxial Marine Speakers w/ LED Lights
Kicker 45KM654L Loud and clear, the KM Coaxial Marine Speakers are built to pump out the tunes – and the fun - for years to come! Whether you mount your speakers in the hull or in KICKER® tower enclosures, you also get a pair of stout marine-grade grilles! LIGHT IT UP Our speakers are made to thrive in the water. UV treatments on injection-molded cones, Santoprene® surrounds, baskets and grilles all help maintain top-shelf performance. KM speakers will endure almost any weather conditions with splash-and-spray-resistant sealed motors, cones and Locking/Sealed Terminal Covers. Speaker hardware is forged from rustproof, 316L stainless-steel. Four-Ohm Voice Coil 3/4-Inch Titanium Tweeter UV-Treated Polypropylene Woofer With Santoprene® Surround UV-Resistant Polymer Basket Locking/Sealed Terminal Cover Sealed Motor Structure 316L Stainless Mounting Hardware Included White and Charcoal Grilles With Seven-Color LED System Included* Meets or Exceeds ASTM Standards for UV** and Salt/Fog Exposure*****ASTM B117 200 hr. Salt Fog Test***ASTM G154 400 hr. Accelerated UV Test *Upgradable to 20 Colors and 19 Lighting Modes with KMLC This KM 6.5-Inch Coaxial Speaker works best with 65 watts of recommended power. Specifications Woofer(in,mm) 6-1/2, 165 Tweeter(in,mm) 3/4, 20 Tweeter Dome Material Titanium Rated Impedance(Ω) 4 Peak Power Handling(Watts) 195 Continuous Power Handling(Watts RMS) 65 Sensitivity(1W,1m) 90 Frequency Response(Hz) 35-21k Mounting Hole Diameter(in,mm) 5-1/16, 128 Mounting Depth(in,mm) 2-3/8, 59.9 LED Lighting Yes Grilles Charcoal and White What's in the Box: 2 - 6.5" 4Ω Coaxials8 - Mounting Screws8 - Mounting Screw Clips2 - Wire Connection Cover2 Zip Ties
$249.99 $229.99
-
Kicker Kicker 44L7S152 15" 2000W Dual-2-Ohm Car Audio Subwoofer/Sub Solobaric L7S
15" Solo-Baric L7 2 Ohm The KICKER® Solo-Baric® L7S™ boasts massive power handling and more cone area than any circular sub. You move more air, so you get more bass. Square Matters The heavy-duty motor structure includes a large-diameter spider for less flex, longer life and superior accuracy. High-temp voice coil wire winding completes a powerful Comp motor that makes the most of every watt you give it. Features: Dual Two-Ohm Voice Coils Injection-Molded Polypropylene Cone Patented Corner Ribs Minimize Distortion SoloKon™ 360-Degree Back Bracing Ribbed Santoprene Surround With Blue Surround Stitching UniPlate™ Back Plate And Pole Piece, Plus Perimeter Venting For Excellent Thermal Management Thick Tinsel Leads Large Ceramic Magnet Cast Aluminum Basket Satin-Nickel Plated, Spring-Loaded Speaker Terminals Fresh Water Bump The materials used in the L7S series makes them a perfect choice for adding some bass to your boat.* *Extreme durability in fresh-water applications only (not recommended for salt water) Specifications Thiele/Small Parameters 44L7S152 T/S Parameters PDF Size (IN.,CM) 15, 38.1 Impedance (OHMS) 2 DVC Max Rec Amplifier Power (WATTS PEAK/RMS)* 2000/1000 Sensitivity (dB 1w/1m) 89.4 Frequency Response (Hz) 18-100 Mounting Depth (IN.,CM) 8-11/16, 22.1 Mounting Cutout, Square (IN.,CM) 13-3/4, 34.9 Min Rec Sealed Box Volume (CU. FT., Liters) 2.0, 56.64 Max Rec Sealed Box Volume (CU. FT., Liters) 6.0, 169.9 Min Rec Vented Box Volume (CU. Ft., Liters)** 3.0, 85.0 Max Rec Vented Box Volume (CU. Ft., Liters)** 6.0, 169.9 What's in the box? one 15-inch subwoofer, one owner's manual, two stickers *Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details. **Port Volume Excluded. Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.
$509.99 $479.99
-
Kicker Kicker 43VC124 300 Watt 4-Ohm Single 12" Loaded Subwoofer+Enclosure/Box Comp VC
Vented 12" Comp Enclosure KICKER® Comp sub boxes deliver the goods with three models made to fit any car or truck. Comp 12-Inch Subwoofer Enclosure The 2016 Comp 12-Inch Subwoofer Enclosure comes loaded with a single 4-Ohm terminal.With a custom-made port plus updated subwoofer and box design, this ultra-efficient enclosure doles out a new level of bass in a very small space.The Comp 12-Inch Loaded Enclosure works best with 150 watts of recommended power. Pair this amp with a Kicker CXA800.1, which will do 300 watts at 4 ohm! Installing this yourself? Check out our wiring kits for a complete solution! Specifications Subwoofer (in, cm) 12, 30 Impedance (Ohms) 4 Power Watts (peak/RMS) 300/150 Dimensions
$239.99 $219.99
-
DC Audio DC Audio Level 3 15" Dual-2-Ohm 1000W RMS / 2000W Peak Car Audio Subwoofer/Sub
The level 3 sub is the ultimate daily driver sub. It puts out the low lows with lots of output designed for sealed or ported enclosures. The Level 3 sub is a triple stacked FEA optimized motor wrapped in a magnet boot, chrome top plate and T yoke. The deep gap offers more X-max for a total of 22.5mm. This sub also comes with dual upgraded progressive spiders, cone, surround, 3" voice coil, cast basket, push terminals, and upgraded sewn down lead wire. We give the Level 3 a power rating of 1000w RMS/2000w peak. Sub Size 10" 12" 15" 18" Mounting Depth 6.25" 6.75" 8" 9.5" Mounting Hole Diameter 9.35" 11" 14" 16.75" Outside Driver Diameter 11" 12.5" 15.7" 18.5" Motor Width 7" 7" 7" 7" Weight 20lbs 20.5lbs 21.5lbs 22lbs VC Diameter 3" 3" 3" 3" Displacement .15³ ft .16³ ft .18³ ft .22³ ft Magnet Weight 18lbs 18lbs 18lbs 18lbs Power Handling RMS/Peak 1000 / 2000 1000 / 2000 1000 / 2000 1000 / 2000 Impedance (Ohm) D1/D2/D4 D1/D2/D4 D1/D2/D4 D1/D2/D4 Sd 324cm² 481cm² 823cm² 1217cm² Vas 13.16 liters 28.99 liters 84.88 liters 185.6 liters Cms 0.09 mm/N 0.09 mm/N 0.09 mm/N 0.09 mm/N Mms 190 g 225 g 295 g 305 g Fs 38.5 35.4 30.9 30.4 BL 17.2 N/A 17.2 N/A 17.2 N/A 17.2 N/A Re 3.6 Ohm 3.6 Ohm 3.6 Ohm 3.6 Ohm Le 3.5 mH 3.5 mH 3.5 mH 3.5 mH Qms 7.66 8.33 8.18 8.32 Qes 0.567 0.617 0.706 0.718 Qts 0.528 0.574 0.65 0.661 Xmax 23 mm 23 mm 23 mm 23 mm Ref SPL @ 1 watt 83.1 dB (86.6@2.83V) 85 dB (88.5@2.83V) 87.3 dB (90.8@2.83V) 90.4 dB (93.9@2.83V) Suggested Sealed .65³ ft 1³ ft 2³ ft 4³ ft Suggested Ported 1.0³ ft 1.25³ ft 3.0³ ft 5.5³ ft Key Features • Extremely rigid non-pressed paper cone assembly • Multilayered polymer foam surround • Polypropylene dust cover with DC logo • Dual 8” OD semi cup progressive roll spider • Extra heavy duty interweaved tinsel lead wire sewn to spider • Cast aluminum black frame • FEA analyzed and optimized motor assembly – Fully CNC machined • Rubber mounting gasket • Chrome spring loaded push terminals • Dual 4 ohm 3” Hi-temp Aluminum voice coil wound on black anodized voice coil former
$329.99
-
DC Audio DC Audio A3 5.0K 5000 Watt Mono Block Car Audio Class D Amplifier/Amp+Bass Knob
The 5.0kw competition series amplifier is a 5,000 watt mono block. It is capable of running up to 18 volts for up to 7,300 watts. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped. It comes with a bass knob and a clipping indicator. For power inputs it will accept dual 0 awg for power and dual 0 awg for ground. Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Variable bass boost • Wired remote control • Clipping indicator • Dual 0 awg power and ground inputs (both must be used) We recommend for installation • 1 upgraded battery under the hood • 1 extra 800ci battery in the rear • Minimum of two 0 awg ran from the front battery to the rear battery • Both 0 awg power and ground inputs on amp must have 0 awg ran to them for a total of 4 runs into the amp • Upgraded aftermarket alternator • Dash mounted voltage meter Specifications Features Voltage 5.0kw Output Power (RMS) 4 ohm 14.4V 900W x 1 2 ohm 2,300W x 1 1 ohm 5,000W x 1 1 ohm 16V 6,000W x 1 1 ohm 18V 7,300W x 1 Input Sensitivity 6V~0.2V Low Pass Filter Switchable ( @ 24 dB Slope) Variable Hz 35~250 Subsonic Filter Switchable ( @ 24dB slope ) Variable Hz 10~50 Bass Boost Variable dB 0-9dB Frequency Response Hz 15-270 Signal to Noise Ratio dB 100 Damping factor 150< Efficiency @ 4ohm % Over 90% THD @ 4ohms Less than 0.1% Fuse Rating 500 Amps Linked Fuse Rating 1000 Amps Indicator Power Yes Protection Yes Clip Yes Speaker & Power terminal Mold Type Yes Power Gauge 0Ga Heatsink Length inch/mm 25.59"/650mm Heatsink Width inch/mm 9.38"/66mm Heatsink Height inch/mm 2.35"/59.6mm Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Variable bass boost • Wired remote control • Clipping indicator • Dual 0 awg power and ground inputs (both must be used)
$2,063.60 $1,649.99
-
Kicker Kicker 45L7R122 1200W Dual 2 Ohm 12" Subwoofer/Sub Solobaric L7R L7 L7R122
The 12-inch L7R Square Sub moves more air and delivers bigger bass, so you get more bump out of every watt! The engineers at KICKER invented the original square sub right here in Stillwater, Oklahaoma. Designed to give you more bass, yet take up no more air space than a standard round sub. Welcome to the incredible world of the L7R! Dual Two-Ohm Voice Coil Wrap Around Gasketing Patented Ribbed Corners Injection-Molded SoloKon™ Woofer 360-Degree Back Bracing UniPlate™ Back Plate And Pole Piece Bumped Back Plate Thick Tinsel Leads Large Ceramic Magnet Steel Basket With Spoke Design Nickel Plated Speaker Terminals The L7R 12-Inch Subwoofer works best with 600 watts of recommended power in a sealed or ported enclosure. See below for more details. Specifications SIZE [in, cm]:12, 30 IMPEDANCE [Ohms]:4 DVC POWER WATTS [peak/RMS]:1200/600 SENSITIVITY [dB 1w/1m]:86.7 MOUNTING DEPTH [in, cm]:6-7/8, 17.4 MOUNTING DIAMETER [in, cm]:11-1/16, 28.1 MIN SEALED BOX VOL [cu. ft, L]:.88, 24.92 MAX SEALED BOX VOL [cu. ft, L]:2, 56.64 MIN VENTED BOX VOL [cu. ft, L]:1.75, 49.6 MAX VENTED BOX VOL [cu. ft, L]:3.25, 92 What's in the Box:1 - 12" Subwoofer, 1 - install manual, 2 - Kicker stickers
$299.99 $269.99
-
Kicker Kicker 45L7R124 1200W Dual 4 Ohm 12" Subwoofer/Sub Solobaric L7R L7 L7R124
The 12-inch L7R Square Sub moves more air and delivers bigger bass, so you get more bump out of every watt! The Original Originator, n. (əˈrijəˌnādər): see KICKER The engineers at KICKER invented the original square sub right here in Stillwater, Oklahaoma. Designed to give you more bass, yet take up no more air space than a standard round sub. Welcome to the incredible world of the L7R! Dual Four-Ohm Voice Coil Wrap Around Gasketing Patented Ribbed Corners Injection-Molded SoloKon™ Woofer 360-Degree Back Bracing UniPlate™ Back Plate And Pole Piece Bumped Back Plate Thick Tinsel Leads Large Ceramic Magnet Steel Basket With Spoke Design Nickel Plated Speaker Terminals The L7R 12-Inch Subwoofer works best with 600 watts of recommended power in a sealed or ported enclosure. See below for more details. Specifications SIZE [in, cm]:12, 30 IMPEDANCE [Ohms]:4 DVC p>POWER WATTS [peak/RMS]:1200/600 SENSITIVITY [dB 1w/1m]:86.7 MOUNTING DEPTH [in, cm]:6-7/8, 17.4 MOUNTING DIAMETER [in, cm]:11-1/16, 28.1 MIN SEALED BOX VOL [cu. ft, L]:.88, 24.92 MAX SEALED BOX VOL [cu. ft, L]:2, 56.64 MIN VENTED BOX VOL [cu. ft, L]:1.75, 49.6 MAX VENTED BOX VOL [cu. ft, L]:3.25, 92 What's in the Box:1 - 12" Subwoofer, 1 - install manual, 2 - Kicker stickers
$299.99 $269.99
-
Colossal Sounds Ultra U-15 15" 2500w Car Audio Subwoofer
The Colossal Sounds Ultra 15" subwoofer combines high-output SPL performance with accurate daily-driver sound. This 15-inch ground-pounder is designed for strong, efficient output across a wide range of music.Its cooling-focused motor assembly, non-pressed paper cone, carbon-fiber dust cap, Nomex spider pack, heavy-duty sewn-in lead wires, and cast-aluminum basket are engineered for durability, cone control, and consistent daily output.
$599.99
-
Basshead Supply Sundown Audio Single 10" SAV3 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio SAV3 10" subwoofer. Specifications: 0.988121 cubic feet net enclosure 35.0 hz tuning 14.38 sq inches of port 11.5" x 1.235151" port dimensions 9.5" subwoofer cut out 3/4" triple refined MDF construction Solid 1" baffle for ultimate strength Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 13.0" tall 20.5" wide 13.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio SAV3 10" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 3/4" triple refined MDF — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 3/4" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$246.59
-
Basshead Supply Sundown Audio Single 12" XV4 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio XV4 12" subwoofer. Specifications: 2.464435 cubic feet net enclosure 31.0 hz tuning 36.68 sq inches of port 14.0" x 2.582728" port dimensions 11.19" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 16.0" tall 26.875" wide 19.75" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio XV4 12" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$399.59
-
Basshead Supply Sundown Audio Dual 15" SAV3 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio SAV3 15" subwoofer. Specifications: 6.966247 cubic feet net enclosure 32.0 hz tuning 101.75 sq inches of port 18.5" x 5.473479" port dimensions 14.01" subwoofer cut out 3/4" triple refined MDF construction Solid 1" baffle for ultimate strength 3/4" center baffle brace Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 23.375" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio SAV3 15" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 3/4" triple refined MDF — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 3/4" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$638.39
-
Basshead Supply Sundown Audio Single 18" NSV6 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio NSV6 18" subwoofer. Specifications: 7.0 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.625" port dimensions 16.69" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio NSV6 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$803.39
-
Ampere Audio Ampere Audio AA-3K 3,000W Mono Block Car Amplifier – High Power Car Audio Amp
Unleash Serious Performance with the Ampere Audio AA-3K Car Amplifier When it comes to building a powerful bass system, having the right amplifier can make all the difference. Many enthusiasts struggle with amplifiers that promise big numbers but fail to deliver consistent performance when it matters most. Whether you're upgrading your daily driver, building a weekend demo vehicle, or simply looking for reliable power for your subwoofers, you need an amplifier that combines output, efficiency, and control. The Ampere Audio AA-3K was designed to do exactly that. Why Reliable Power Matters An amplifier is the foundation of any subwoofer system. When an amplifier runs out of power, overheats, or clips excessively, performance suffers and your equipment is put at risk. Weak amplifiers can leave subwoofers underpowered, while poorly designed amplifiers often struggle to maintain clean output during demanding listening sessions. The AA-3K eliminates those concerns by delivering a true balance of power and reliability. Built around a high-efficiency Class D platform and engineered with a robust Dual MOSFET PWM power supply, it provides the current your subwoofers need while maintaining stable operation under heavy loads. Built for Bass Enthusiasts The AA-3K is designed to produce up to 3,000 watts RMS at 1 ohm and can be strapped with a second amplifier for an incredible 6,000 watts RMS of combined output. Whether you're powering a single high-performance subwoofer or multiple drivers in a larger system, the AA-3K delivers the authority needed to bring your music to life. Key features include: Dual MOSFET PWM power supply for stable, efficient power delivery Advanced Class D technology for high output with minimal heat Strapping capability for 6,000W performance Wired remote with real-time voltage, temperature, and clipping display Independent crossovers and adjustable phase for precision tuning Control That Lets You Fine-Tune Your System Every vehicle, enclosure, and subwoofer combination is different. That's why the AA-3K includes a complete suite of tuning controls designed to help you get the most from your system. Variable crossover controls allow you to tailor your frequency response, while adjustable phase and bass boost controls help maximize performance based on your installation. The included wired remote gives you real-time access to critical system information, including amplifier voltage, operating temperature, and clipping status. This allows you to monitor performance and make adjustments without leaving the driver's seat. Built to Perform Day After Day The AA-3K was designed for enthusiasts who demand more than just peak numbers. With advanced protection circuitry guarding against thermal overload, voltage fluctuations, speaker shorts, and DC offset, this amplifier is built to withstand the demands of real-world use. Whether you're chasing higher output, upgrading your current setup, or building a system that simply gets loud and stays reliable, the Ampere Audio AA-3K delivers the performance, control, and durability needed to take your bass to the next level. Technical Specifications: Power Output (RMS @ 14.4V): 1 Ohm Mono: 3,000W 2 Ohm Mono: 2,000W 4 Ohm Mono: 1,000W 2 Ohm Strapped (Linked): 6,000W General: Class D Digital Monoblock Design Dual MOSFET PWM Power Supply Efficiency: >94% Input Sensitivity: 6V – 0.2V Frequency Response: 14Hz – 266Hz Signal-to-Noise Ratio: 99dB Damping Factor: >400 THD: <0.1% Working Voltage: 9V – 16.5V Controls & Filters: Low Pass Filter: 35Hz – 250Hz (24dB/Octave) Subsonic Filter: 10Hz – 50Hz (24dB/Octave) Bass Boost: 0 – 9dB @ 45Hz Phase Shift: 0° – 180° Connectivity & Extras: RCA Inputs / Outputs Master / Slave Linking Capability Wired Remote Control with: Voltage Display Temperature Display Clipping Indicator Protection Features: Thermal Protection Voltage Protection Speaker Short Protection DC Offset Protection Fuse Rating: 300A (External – not built-in) Dimensions: 11.81” (L) x 11.82” (W) x 3.06” (H)
$689.99
-
$21.99
