Active Items
-
Sundown Audio Sundown Audio SA-Classic 12" Subwoofer
1000 Watt RMS/ 2000 Watt Peak Dual 2 or 4 ohm voice coils Optimized for small ported, sealed, & band-pass enclosures Large aluminum Faraday ring for smooth acoustic response High strength cast aluminum frame Low distortion motor construction High-temperature voice coil wire Spring-loaded terminals Stitched-on “XL” tinsel lead wires The SA Classic sub is a stunning combination of value, power handling, and deep excursion. It features a cast aluminum frame that houses a bulletproof custom 2.5-inch voice coil, robust double-layered Nomex spider, and SPL competition-grade paper cone. These components are built into a flexible design that works well in any type of enclosure. Enclosure Designs .Zip File
$339.99
-
Sundown Audio Sundown Audio E-Series V.4 12” Subwoofer
750 Watts RMS / 1500 Watts Peak Dual 2 or 4 ohm voice coils Optimized for ported enclosures Class-leading 14mm Xmax Double-stacked magnet Vented magnetic gap & pole piece for superior cooling High strength stamped steel frame High temp 4-layer copper voice coil wire High-quality push terminals Stitched-on Mini-XL tinsel leads Through relentless research in our North Carolina Headquarters, Sundown optimized a 2.5” voice coil and a truly unique motor design to get the deepest possible bass response out of a 12” subwoofer. The subwoofer showcases a distinctive motor design, featuring a heavily vented magnetic gap and solid pole piece, enabling exceptional thermal power handling. The spider itself is a high strength poly-cotton blend designed to handle the full capacity of the motor. To provide an additional level of ruggedness the spider is bolted down and glued to the frame. Its motor geometry allows for a remarkable 14mm one-way linear Xmax, delivering excursion equivalent to far larger cones.
$244.99
-
Sundown Audio SML-Series 12” Thin Subwoofer
600 Watts RMS/1200 Watts Peak Dual 2 or 4 ohm voice coils Black Aluminum 2.5” voice coil former for superior heat dissipation High temperature 4-layer copper voice coil wire Stitched-on “Mini-XL” tinsel leads to prevent fatigue and failure Vented pole-piece and multi-vented magnetic gap Dual-magnet design for smooth acoustic response Custom tooled cone shape for reduced mechanical noise over high excursion Bolt-through motor design to ensure maximum longevity and ruggedness Introducing the SML series: a revolutionary line of subwoofers by Sundown Audio. This series is an inch shallower than the SLD line, yet delivers nearly the same excursion, making it the ultimate choice for customers in search of an extremely shallow driver with deep bass. Specifically designed to fit under or behind your seat, the SML series excels in performance, especially within small enclosures.
$249.99
-
Sundown Audio Sundown Audio X-Series v.2 6.5" Subwoofer
The X-6.5SW is Sundown Audio's first true sub-woofer smaller than 8 inches in diameter. It features a voice coil identical in winding dimensions to their SA-8 v.3 subwoofer (a massive 2” diameter coil with a 1.4” winding height) so thermal power handling is absolutely massive. Specifications: Xmax: 16mm one-way by 70% BL RMS Power: 400-watts Large noise-free pole vent design Specially designed spiral-cut basket venting technique (unique to this model in our line) 2” diameter 4-Layer CCAW wire voice coil wound on thick Kapton former Copper Pole-Cap For Reduced Inductive Distortion Integrated Tinsel Leads to prevent lead slapping Proprietary flat aluminum diaphragm Note on Power Handling: This woofer is mechanically limited. It requires a SMALL ported enclosure. Placing it in a large or sealed enclosure will reduce mechanical power handling substantially. Ported: 0.25-0.33 ft^3 volume Box Recommendations: Sealed: .15 ft^3 Ported: 0.3 ft^3 Displacement: .05 ft^3 Depth: 4.00" Outside Diameter: 6.75" Cut-Out: 5.52" Recommended Tuning: 32hz Recommended Port Area: 4 in^2
$149.99
-
Sundown Audio Sundown Audio SA-Classic 10" Subwoofer
1000 Watt RMS/ 2000 Watt Peak Dual 2 or 4 ohm voice coils Optimized for small ported, sealed, & band-pass enclosures Large aluminum Faraday ring for smooth acoustic response High strength cast aluminum frame Low distortion motor construction High-temperature voice coil wire Spring-loaded terminals Stitched-on “XL” tinsel lead wires The SA Classic sub is the perfect combination of power handling and deep excursion. A cast aluminum frame houses a bulletproof custom 2.5-inch voice coil, robust double-layered Nomex spider, and SPL competition-grade paper cone, all built into a flexible design that works in any kind of enclosure. Enclosure Designs .Zip File
$319.99
-
Sundown Audio Sundown Audio VEX-10 500 Watt Pro Audio Midrange Speaker
Power Handling: 500 Watts RMS Impedance: 4/8-ohm SVC Vented cast frame 3-inch voice coil X-Max: 9mm Carbon fiber cone Excellent for Mid-bass High strength ferrite motor Dual shorting rings for smooth response Mounting depth : 5.2" Rear Vented Spring Loaded Terminals With an enormous 2.5” voice coil and a super-efficient cooling system, the VEX handles 300 watts of power with ease. We went with real carbon-fiber cone to handle high SPL systems without breakup, and achieved a 94.3dB sensitivity by combining a large diameter, high strength ferrite motor with a neodymium pole-cap magnet! A sturdy cast-aluminum frame features extensive spider cavity vents to further increase thermal power handling. The Sundown Audio VEX is one of the loudest, best sounding high-efficiency midrange drivers in existence. Frequency Response
$319.99 $199.99
-
Sundown Audio Sundown Audio LCS v.2 12" Subwoofer
• 500 Watts RMS / 1000 Watts Peak• Dual 4-ohm voice coils• Optimized for small, ported enclosures• Class-leading 14mm Xmax• Double-stacked magnet• Vented coil gap & pole for superior cooling• Extra thick stamped steel frame• High temp 4-layer copper voice coil• High-quality push terminals• Stitched-on flat tinsel leads• Extremely low resonant frequency (Fs) Find the ideal balance of power, deep bass, and affordability with Sundown LCS subs. Sundown LCS woofers are known for their impressive bass response and high dependability. Typical entry-level woofers are limited in terms of excursion, mechanical ruggedness, and thermal performance. The v.2 update added an all-new, custom-tooled frame, push terminals, a rubber mounting gasket, and upgraded tinsel leads.
$174.99
-
Sundown Audio Sundown Audio Nightshade NS-Series NS6 15" 3000W Subwoofer NS v.6
3500 Watt RMS / 7000 Watt Peak Dual 1 or 2 ohm voice coils Optional carbon cone/dustcap available Custom tooled basket Custom-tooled ultra-linear spider packs Extended shorting ring Eight-layer voice coil Custom tooled basket Cast aluminum cooling ring Ultra-linear spider pack Unique air exchanging system forces hot air out and cool air in Aluminum vent ring Ultra-linear Mega Roll V2 surround Features: The Nightshade 3,000-watt Neodymium sub is engineered to deliver incredibly powerful low end, with an extremely linear excursion and next-level thermal management. It features an eight-layer voice coil for excellent power handling and an extended shorting ring to minimize distortion and deliver a smooth, highly accurate sound at extreme SPL levels.
$1,049.99
-
Sundown Audio Sundown Audio GT-1R Super Tweeter
Power Handling: 100 Watts RMS Impedance: 4 or 8 Ohms Frequency range: 4kHz - 20kHz Sensitivity 100dB Sold Individually Handling 100 watts and sporting a slender mounting ring, the GT-R1 is the choice when you want the tweeter to take up a smaller footprint on your door, but want to hear those highs no matter how loud the bass is. With an incredible 100dB sensitivity and a wide frequency range, this super tweeter makes the most out of every watt you give it.
$39.99
-
Sundown Audio SA-Series SA-3M 3" Speaker
The all-new 2025 Sundown SA speaker series has been designed to make a statement. What statement, you may ask? That Sundown Audio can be just as serious about SQ as we are about SPL. Many people already know this but our subwoofers – even the ones used for crushing demos – have some of the lowest distortion on the market. We are now bringing our unique approach to the more dedicated Sound Quality market.Starting at the upper end of the frequency spectrum we have the SA-1T Tweeter. The SA-1T features a 25.5mm silk dome (total 38mm including surround) driven by a powerful neodymium motor structure. The dome features a compact, tuned back chamber which helps it to achieve its extremely low FS around 700hz. This gives you an enormous amount of flexibility in choosing the crossover. The tweeter can be used as a 2-way with the 6.5M or the 8M models or as part of a three way with either and the 3M model. In addition to the low FS and smooth response the SA-1T has a very high 92dB sensitivity so it doesn't take much power to get loud enough for just about anyone. The SA-1T is the 4th generation SA tweeter building on the success of the tweeter found in the SA Component sets over three generations.Headed down the spectrum to the midrange we have the SA-3M. This "little" unit is something incredibly special and is a favorite project of lead product designer / founder Jacob Fuller. We really went all-out on this unit to address the "big 3" drivers of distortion. The SA-3M features 4.5mm of one-way linear excursion by 70% BL (with 8mm x-mech thanks to the custom tooled frame – so no bottoming out even on powerful dynamics) and over 6mm by CMS and LE definitions on Klippel. There is essentially NO risk of the driver reaching linearity limits in most applications. The beefy motor structure is a combination of ferrite and a neodymium pole cap magnet to help us reach 84.5dB sensitivity at 1-watt. There is a double LE treatment internal to the motor via both a copper pole sleeve and an aluminum magnet ID shorting ring allowing the SA-3M to play full-range to beyond 20khz (although, for several reasons, we do suggest using a tweeter for the top-end). On the bottom end they can be high-pass crossed over at 300hz effortlessly with 150-watts of power handling (thanks to the 28mm diameter, extra-long voice coil) or even lower if needed, with less power, due to the incredibly high linear stroke. The suspension system, surround and spider, of the SA-3M took over a year of FEA simulations and testing to reach perfection and is just as important as the motor to the resulting low distortion. We gave the suspension just as much attention as we would for a full blown high-stroke subwoofer. To finish off this masterpiece we tested several different types of woven carbon fiber cones & dust caps to achieve the best FR possible.To finish off the 2025 SA speaker line we created the SA-6.5M and the SA-8M. Both of which can be used as a mid-bass or mid-range speaker depending on your application. Both drivers feature the same attention to detail as the 3M regarding the carbon cone and dust cap, surround, and spider. All of these parts were fully FEA simulated and Klippel verified.The SA-6.5M features 5.9mm one-way linear excursion by 70% BL, 7mm by CMS, and 6.28mm by LE on Klippel. Thanks to the efficient motor venting and ample voice coil the power handling is rated for 110-watts full range / 200-watts with a 70hz HPF filter with a respectable 89dB sensitivity. As with the SA-1T this is a 4th generation SA speaker due to the SA component set from prior generations. For this iteration we optimized it further and also created a new custom-tooled frame. The revised frame is more aerodynamics and also allows for superior coil ventilation. As with most Sundown products you will find a thick magnet-ID Faraday ring as well. Last, but absolutely not least, we have the SA-8M which takes linear stroke to yet another level. We were able to achieve 9mm one-way linear by 70% BL and nearly 10mm by CMS and LE standards. As with the 3M, the 8M features a pole sleeve and magnet ID faraday ring for LE treatment. This unit is an absolute powerhouse for mid-bass, and we believe it will make big waves in the SQ world. On the output side it has a 91.5dB sensitivity and will handle 130-watts full-range / 250-watts with a 70Hz HPF thanks to the efficient motor venting and huge 2" coil. The SA-8M is all-in on SQ and output potential – the Sundown way! Sold As A Pair Includes Metal Grille Built as Full Range with lot of low end extension 30W RMS 150W RMS @HPF 300hz+ Cutout: 3.1" Outer Diameter: 3.6" Depth: 1.91"
$199.99
-
Sundown Audio Sundown Audio SA-69CX 6"x9" Coaxial Speakers
125 W RMS Silk dome tweeter Hybrid fiber cone Integrated crossover Cast aluminum frame Premium spring-loaded speaker terminals SPL: 91 Db Frequency range: 45Hz - 20KHz Sundown’s premiere sound quality separates, the SA-6.5CS is a marvel of design and top-tier components. The midrange features a high-quality cast aluminum basket, housing a cone with a carefully selected blend of paper and wool fibers. This design dampens any unwanted resonances for an incredibly smooth, detailed response. The surround is a high-compliance rubber, engineered to tame edge resonances within the cone. An FEA-optimized motor was designed in-house and features a full 6mm one-way linear excursion - thanks to a carefully designed motor and extended pole piece. To increase thermal performance, the SA midrange features a vented magnetic gap and vented voice coil collar. The SA series silk dome tweeter matches the smooth sound of the midrange. After extensive testing, Sundown optimized the tweeter’s gap, dome material, lens, and chamber damping material. The results speak for themselves. The SA separates were engineered for one, simple goal: to let you completely immerse yourself in the music. At any volume. For as long as you want.
$259.99
-
Sundown Audio SIA-1250D Full-Range Mono Amplifier
1,250 x 1 @ 1 ohm RMS 1,250 x 1 @ 2 ohms RMS 800 x 1 @ 4 ohms RMS Variable 12dB low pass filter: 40Hz-20kHz Variable 12dB high pass filter: 10Hz-1kHz Variable 12dB Bass Boost @ 50Hz Power, protection & clipping indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Advanced 3-speed fan design Subsonic filter Intelligent full bridge design Wired remote control with clipping indicator included Delivering the same power at 1 or 2 ohms, Sundown SIA Smart amplifiers are built with power and stability at their core. These full-bridge amplifiers feature a heavy heatsink for outstanding thermal management, while the three-speed Smart Cooling fan and advanced power supply design protects the amplifier from overheating and distorted output.
$299.99
-
Sundown Audio SFB-600D 600W Full Range Mono Amplifier
600 @ 1 ohms RMS 350 @ 2 ohms RMS 250 @ 4 ohms RMS Variable 12dB low pass filter: 80HZ – 20kHZ Variable 12dB high pass filter: 15HZ – 1kHZ Variable 12dB Bass Boost @ 50Hz 0-9dB Power, protection & clipping indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Wired remote control with clipping indicator The flexible SFB (Sundown Full Bridge) amplifiers pack a powerful punch in a compact size! Stable down to 1 ohm, the full-range SFB can be used as a subwoofer amp, or as an ideal power source for an array of P.A. speakers. If you are looking for raw power on a budget, look no further than the SFB Series from Sundown Audio.
$174.99
-
Sundown Audio Sundown Audio Nightshade NS-Series NS6 18" 3000W Subwoofer NS v.6
3500 Watt RMS / 7000 Watt Peak Dual 1 or 2 ohm voice coils Optional carbon cone/dustcap available Custom tooled basket Custom-tooled ultra-linear spider packs Extended shorting ring Eight-layer voice coil Custom tooled basket Cast aluminum cooling ring Ultra-linear spider pack Unique air exchanging system forces hot air out and cool air in Aluminum vent ring Ultra-linear Mega Roll V2 surround The Nightshade 3,000-watt Neodymium sub is engineered to deliver incredibly powerful low end, with an extremely linear excursion and next-level thermal management. It features an eight-layer voice coil for excellent power handling and an extended shorting ring to minimize distortion and deliver a smooth, highly accurate sound at extreme SPL levels.
$1,099.99
-
Sundown Audio Sundown Audio SALT-3 3000W Class D Amplifier
6,000 x 1 @ 2 ohms RMS (when linked) 3,000 x 1 @ 1 ohms RMS mono 1,500 x 1 @ 2 ohms RMS mono 750 x 1 @ 4 ohms RMS mono 24dB variable subsonic filter: 10HZ - 50HZ 24dB variable low pass filter: 35HZ - 250HZ Frequency Response : 10 Hz – 250 HZ Variable bass boost @ 45Hz 0-9dB Phase shift control 0-180 degrees Power, clipping and protection indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Included wired remote control displays voltage, temperature, and clipping Feel the power of the Sundown SALT-3! This strappable amp delivers a massive 6,000 watts at 2 ohms when attached to another SALT-3, or pump out 3,000 watts at 1 ohm on its own. The amp features both a 24dB variable subsonic and low pass filter, along with a bass boost at 45Hz, letting you dial in your personal, perfect sound. The phase shift control makes it easy to precisely adjust the output. With onboard indicators for power, clipping, and protection you’ll have full control over your setup. Use the included wired remote control to see voltage, temperature, and clipping at a glance. Producing optimum power at realistic voltages (the 12s, rather than needing 14+ volts), the SALT – Sundown Audio Low-Voltage Technology – is Sundown’s answer! SALT amplifiers represent the pinnacle of Korean Class-D amplifier technology. Whether you are a world-class SPL competitor or simply want to bang harder than absolutely anyone else, the SALT series will be right at home in your system. Specifications Input Sensitivity : 6V - 0.2V Efficiency : 90% < Signal / Noise Ratio : 90DB < Damping Factor : 400 < Tested Voltage & THD : 12.8V & Less Than 1% THD Operation Voltage : DC 9V - 15.5V Power Input Recommended Fuse : 300 Amps Dimensions : 19.68” L x 8.67” W x 2.80” H
$1,199.99
-
Sundown Audio Z-Series ZV7 15" Subwoofer
The Z v.7 is the third step up in Sundown's 2025 "ultra-high excursion" sub-woofer lineup after the M and X v.4 series. All models (12,15,18) feature our custom tooled and patented frames (US Patent Numbers D691597, D691598, and D741841) – the Sundown “mega-platform.” Please note – the Z v.7 is not available, aside from special orders, in 10s due to the motor size. We mate these new platform frames to a quad stacked 265mm (10.43”) diameter motor structure with a total magnet stack height of 100mm (3.94”) featuring a hyper-extended pole and extreme clearances (allowing over 4" p-p travel before mechanical bottom effectively making it bottomless). This is, by far, the largest motor we have ever produced on a Z series sub-woofer. The motor force factor (BL^2/RE) is ~50% higher than the previous generation Z v.6 series. This motor drives a 3.3" diameter 4-Layer Round Wire Aluminum Voice Coil wound on a thick aluminum former. These new round wire coils use a special Sundown designed “fat wire” winding method to handle significant amounts of power and abuse. Based on Sundown's years of experience with the Z v.4, 5, and 6 series we've also improved the voice coil ventilation yet again. The Z v.7 features an entirely new and patent-pending airflow directing pole cap, six pole OD channels, SIXTEEN gap vents, and a cross-drilled / slotted top plate to keep the voice coil running cool under extreme conditions.The Z v.7 motor also features a 9mm thick magnet ID Faraday ring which is locked into both the top and back plates. This ring combined with an all-new pole-extension inductance sleeve gives the Z v.7 the most linear inductive performance of any mega-platform sub-woofer to date. As if all of this were not enough to cement the Z v.7as a legend... we were also able to achieve 42mm of one-way linear excursion by 70% BL with an extremely uniform curve via our extensively FEA optimized motor and 95mm long voice-coil winding length. The Z v.7 series was designed from the ground-up to become the new standard in the low-frequency / small, ported box sub-woofer category in this price range. They will work in the same enclosures that are commonly used for Sundown Audio's mega-platform sub-woofers. The Z v.7 series, like its other mega-platform brethren, is really a different kind of woofer due to its incredibly linear suspension. They are designed for the LOWEST level of bass extension possible in a small enclosure while maintaining extremely low levels of distortion.Physical Dimensions: Click Here
$1,364.99
-
Sundown Audio Z-Series Z8 8" 4000W Subwoofer Z-8
Small Size. Serious Power. Unmatched Engineering. Don’t let the size fool you — the Z8 Series 8” subwoofer is built to perform well beyond expectations. With an incredible 2000 watts RMS and 4000 watts peak power handling, this compact beast is ready to drop low, hit hard, and take a beating — all while maintaining control and clarity. Designed for high-output systems with limited space, the Z8 offers the same elite-level engineering found in our larger Z Series drivers, packed into an 8-inch frame. This sub is built around a black aluminum 2.75" 4-layer round-winding voice coil with a massive 30mm Xmax, giving it incredible excursion and power handling for its size. Every component is engineered for airflow and cooling: from the optimized high-velocity pole vent to the cast-aluminum vented frame spacer ring and heavily vented magnetic gap. Add in stitched XL tinsel leads, a Mega-Roll v.2 surround, custom spider packs, and a large aluminum Faraday ring, and you’ve got a sub that’s made for real-world abuse and long-term performance. Designed specifically for ported enclosures (sealed not recommended), the Z8 thrives in a 1.0 cu. ft. net enclosure tuned to 32Hz. Whether you’re building a powerhouse daily driver or squeezing competition-level performance into a tight space, the Z8 delivers big bass in a small footprint — no compromises. Features Power Handling:2000 Watts RMS / 4000 Watts Peak Xmax = 30mm Heavily vented magnetic gap Spring Loaded Terminals Optimized high-velocity pole vent Innovative high-velocity cast-aluminum vented frame spacer ring Black aluminum 2.75 inch 4-layer round-winding voice coil sing our proprietary ultra-thick winding method Mega-Roll v.2 surround Custom tooled basket Large aluminum Faraday (shorting) Ring Stitched-On XL Tinsel Leads to prevent fatigue and failure Custom-tooled ultra-linear spider packs
$699.99
-
Sundown Audio SA-1T Tweeter
The all-new 2025 Sundown SA speaker series has been designed to make a statement. What statement, you may ask? That Sundown Audio can be just as serious about SQ as we are about SPL. Many people already know this but our subwoofers – even the ones used for crushing demos – have some of the lowest distortion on the market. We are now bringing our unique approach to the more dedicated Sound Quality market.Starting at the upper end of the frequency spectrum we have the SA-1T Tweeter. The SA-1T features a 25.5mm silk dome (total 38mm including surround) driven by a powerful neodymium motor structure. The dome features a compact, tuned back chamber which helps it to achieve its extremely low FS around 700hz. This gives you an enormous amount of flexibility in choosing the crossover. The tweeter can be used as a 2-way with the 6.5M or the 8M models or as part of a three way with either and the 3M model. In addition to the low FS and smooth response the SA-1T has a very high 92dB sensitivity so it doesn't take much power to get loud enough for just about anyone. The SA-1T is the 4th generation SA tweeter building on the success of the tweeter found in the SA Component sets over three generations.Headed down the spectrum to the midrange we have the SA-3M. This "little" unit is something incredibly special and is a favorite project of lead product designer / founder Jacob Fuller. We really went all-out on this unit to address the "big 3" drivers of distortion. The SA-3M features 4.5mm of one-way linear excursion by 70% BL (with 8mm x-mech thanks to the custom tooled frame – so no bottoming out even on powerful dynamics) and over 6mm by CMS and LE definitions on Klippel. There is essentially NO risk of the driver reaching linearity limits in most applications. The beefy motor structure is a combination of ferrite and a neodymium pole cap magnet to help us reach 84.5dB sensitivity at 1-watt. There is a double LE treatment internal to the motor via both a copper pole sleeve and an aluminum magnet ID shorting ring allowing the SA-3M to play full-range to beyond 20khz (although, for several reasons, we do suggest using a tweeter for the top-end). On the bottom end they can be high-pass crossed over at 300hz effortlessly with 150-watts of power handling (thanks to the 28mm diameter, extra-long voice coil) or even lower if needed, with less power, due to the incredibly high linear stroke. The suspension system, surround and spider, of the SA-3M took over a year of FEA simulations and testing to reach perfection and is just as important as the motor to the resulting low distortion. We gave the suspension just as much attention as we would for a full blown high-stroke subwoofer. To finish off this masterpiece we tested several different types of woven carbon fiber cones & dust caps to achieve the best FR possible.To finish off the 2025 SA speaker line we created the SA-6.5M and the SA-8M. Both of which can be used as a mid-bass or mid-range speaker depending on your application. Both drivers feature the same attention to detail as the 3M regarding the carbon cone and dust cap, surround, and spider. All of these parts were fully FEA simulated and Klippel verified.The SA-6.5M features 5.9mm one-way linear excursion by 70% BL, 7mm by CMS, and 6.28mm by LE on Klippel. Thanks to the efficient motor venting and ample voice coil the power handling is rated for 110-watts full range / 200-watts with a 70hz HPF filter with a respectable 89dB sensitivity. As with the SA-1T this is a 4th generation SA speaker due to the SA component set from prior generations. For this iteration we optimized it further and also created a new custom-tooled frame. The revised frame is more aerodynamics and also allows for superior coil ventilation. As with most Sundown products you will find a thick magnet-ID Faraday ring as well. Last, but absolutely not least, we have the SA-8M which takes linear stroke to yet another level. We were able to achieve 9mm one-way linear by 70% BL and nearly 10mm by CMS and LE standards. As with the 3M, the 8M features a pole sleeve and magnet ID faraday ring for LE treatment. This unit is an absolute powerhouse for mid-bass, and we believe it will make big waves in the SQ world. On the output side it has a 91.5dB sensitivity and will handle 130-watts full-range / 250-watts with a 70Hz HPF thanks to the efficient motor venting and huge 2" coil. The SA-8M is all-in on SQ and output potential – the Sundown way! SA Series, Version 4 1" Soft Dome Tweeter Pair Sensitivity – 92dB50W RMS @ 3000hz 6dB Crossover50W RMS @ 3000hz 12dB Crossover65W RMS @ 5000hz 12dB Crossover
$149.99
-
Sundown Audio Sundown Audio SAEv4-1500.1D Amplifier
1,500 x 1 @ 1 ohms RMS 800 x 1 @ 2 ohms RMS 450 x 1 @ 4 ohms RMS Class D amplifier 12dB variable low pass filter: 40Hz - 180Hz 12dB subsonic filter: 10Hz – 40Hz Phase shift control 0-180 degrees Power, clipping & protection indicators included Heavy aluminum heat sink for improved thermal control Thermal, voltage, speaker short, and dc-offset protection circuitry Wired remote control with clipping indicator The Sundown Audio SAEv4-1500D amp more than just big bass - it's a powerful upgrade for any car audio enthusiast wanting superior sound quality and reliability. This high-performance half-bridge class D amplifier ensures powerful, detailed output. The variable phase, lowpass and subsonic filters provide the control you need - for the sound you love. Featuring robust protection circuitry against thermal, voltage, speaker short, and DC-offset issues, along with power and protection indicators, this amplifier guarantees long-lasting durability, while the heavy aluminum heat sink enhances thermal control, preventing overheating during extended use. The included wired remote with clipping indicator provides real-time monitoring and output control!
$429.99
-
Sundown Audio Sundown Audio NeoPro-6.5 v.4 6.5" Pro Audio Midrange Speaker
Power Handling: 125W-300W Watts RMS 4 or 8 Ohms Carbon fiber cone Neodymium motor Spring loaded terminals Sold Individually Neo motors and carbon fiber cones – there’s nothing better! Made specifically for car audio PA systems, we chose a carbon-fiber cone to handle high SPL systems without breakup, then joined it with a vented, high strength neodymium motor to deliver amazing volume and clarity.
$189.99
-
Sundown Audio Sundown Audio Nightshade NS-Series NS6 12" 3000W Subwoofer NS v.6
3500 Watt RMS / 7000 Watt Peak Dual 1 or 2 ohm voice coils Optional carbon cone/dustcap available Custom tooled basket Custom-tooled ultra-linear spider packs Extended shorting ring Eight-layer voice coil Custom tooled basket Cast aluminum cooling ring Ultra-linear spider pack Unique air exchanging system forces hot air out and cool air in Aluminum vent ring Ultra-linear Mega Roll V2 surround Features: The Nightshade 3,000-watt Neodymium sub is engineered to deliver incredibly powerful low end, with an extremely linear excursion and next-level thermal management. It features an eight-layer voice coil for excellent power handling and an extended shorting ring to minimize distortion and deliver a smooth, highly accurate sound at extreme SPL levels.
$1,029.99
-
Sundown Audio Sundown Audio LCMR-8 100 Watt Pro Audio Midrange Speaker
Features Sold Individually Power Handling: 100 Watts RMS Impedance: 4/8 Ohm Frequency Range: 120Hz - 6kHz Phase Plug Outside Diameter: 8.25" Cutout Diameter: 7.125" Mounting Depth: 3.50" Effective surface area,Sd: 12.469Mm*
$69.99
-
Sundown Audio SIA-1750D Full-Range Mono Amplifier
1,750 x 1 @ 1 ohm RMS 1,750 x 1 @ 2 ohms RMS 1,250 x 1 @ 4 ohms RMS Variable 12dB low pass filter: 40Hz-20kHz Variable 12dB high pass filter: 10Hz-1kHz Variable 12dB Bass Boost @ 50Hz Power, protection & clipping indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Advanced 3-speed fan design Subsonic filter Intelligent full bridge design Wired remote control with clipping indicator included Delivering the same power at 1 or 2 ohms, Sundown SIA Smart amplifiers are built with power and stability at their core. These full-bridge amplifiers feature a heavy heatsink for outstanding thermal management, while the three-speed Smart Cooling fan and advanced power supply design protects the amplifier from overheating and distorted output.
$369.99
-
Sundown Audio Refurbished Sundown Audio SFB-5000D 5000W Full Range Car Audio Amplifier/Amp
Going along with the budget friendly trends in the industry, We decided it was time to play along. Introducing the “Sundown Full Bridge” line of amplifiers, “SFB” for short. These amps pack a huge punch in a fairly small footprint. Due to the full bridge technology, these amplifiers are not strappable however you can line up multiple amps together to create a massive powerhouse in the same, if not smaller, footprint of your standard half bridge predecessors for a fraction of the cost. All of the SFB 4ch amp’s power ratings are listed at the 1ohm rating. For instance, the SFB-500.4 is 500Wrms at 1ohm per channel. This allows you to run many more speakers together in a multitude of different wiring configurations than using a standard Class A/B/D half bridge design. These are the perfect amplifiers for large systems where you have a plethora of pro drivers in multiple doors or line arrays. All SFB mono amplifiers are full range. This not only allows you to run subwoofers as you would most mono amps, but you can also run a large arrays of mids/highs on these amps as well. The crossovers on the mono SFB amps can attenuate from 15hz all the way up to 20khz. This allows you to set bandpass crossover points and dial in whatever frequency you desire for your setup no matter the type of speaker you are using. The SFB series amps are considered to be a “Brazilian Style” of amplifier. This technology is not new and has been around for quite a while however, the use of them has surged dramatically in the past few years. These little amplifiers are known to be the best bang for your buck. If you are looking for raw power on a budget, look no further than the SFB Series from Sundown Audio. Product Manual Features Digital Class-D Mono Block Amplifier Dual MOS-FET PWM Power Supply 1 Ohm Stable Load 12 dB/Octave – Variable Low Pass Filter 12 dB/Octave – Variable High Pass Filter 9 dB/Octave – Variable Bass Boost 4 Way Protection Ciruit (Thermal, Voltage, Speaker Short, DC Offset) Specifications 1 ohm Mono RMS 5000W 2 ohm Mono RMS 3200W 4 ohm Mono RMS 2200W Recommended Fuse Rating 220A x 2 Low Pass Filter (Variable) 80Hz-20kHz High Pass Filter (Variable) 15Hz-80Hz Bass Boost @ 50Hz 0-12dB Input Sensitivity 5V Max S/N Ratio 100dB Working Voltage 10.5v-15.5v Dimensions 9.00" x 11.50" x 2.75"
$379.99 $319.99
