All Products
-
Kicker Kicker 43VC124 300 Watt 4-Ohm Single 12" Loaded Subwoofer+Enclosure/Box Comp VC
Vented 12" Comp Enclosure KICKER® Comp sub boxes deliver the goods with three models made to fit any car or truck. Comp 12-Inch Subwoofer Enclosure The 2016 Comp 12-Inch Subwoofer Enclosure comes loaded with a single 4-Ohm terminal.With a custom-made port plus updated subwoofer and box design, this ultra-efficient enclosure doles out a new level of bass in a very small space.The Comp 12-Inch Loaded Enclosure works best with 150 watts of recommended power. Pair this amp with a Kicker CXA800.1, which will do 300 watts at 4 ohm! Installing this yourself? Check out our wiring kits for a complete solution! Specifications Subwoofer (in, cm) 12, 30 Impedance (Ohms) 4 Power Watts (peak/RMS) 300/150 Dimensions
$239.99 $219.99
-
DC Audio DC Audio Level 3 15" Dual-2-Ohm 1000W RMS / 2000W Peak Car Audio Subwoofer/Sub
The level 3 sub is the ultimate daily driver sub. It puts out the low lows with lots of output designed for sealed or ported enclosures. The Level 3 sub is a triple stacked FEA optimized motor wrapped in a magnet boot, chrome top plate and T yoke. The deep gap offers more X-max for a total of 22.5mm. This sub also comes with dual upgraded progressive spiders, cone, surround, 3" voice coil, cast basket, push terminals, and upgraded sewn down lead wire. We give the Level 3 a power rating of 1000w RMS/2000w peak. Sub Size 10" 12" 15" 18" Mounting Depth 6.25" 6.75" 8" 9.5" Mounting Hole Diameter 9.35" 11" 14" 16.75" Outside Driver Diameter 11" 12.5" 15.7" 18.5" Motor Width 7" 7" 7" 7" Weight 20lbs 20.5lbs 21.5lbs 22lbs VC Diameter 3" 3" 3" 3" Displacement .15³ ft .16³ ft .18³ ft .22³ ft Magnet Weight 18lbs 18lbs 18lbs 18lbs Power Handling RMS/Peak 1000 / 2000 1000 / 2000 1000 / 2000 1000 / 2000 Impedance (Ohm) D1/D2/D4 D1/D2/D4 D1/D2/D4 D1/D2/D4 Sd 324cm² 481cm² 823cm² 1217cm² Vas 13.16 liters 28.99 liters 84.88 liters 185.6 liters Cms 0.09 mm/N 0.09 mm/N 0.09 mm/N 0.09 mm/N Mms 190 g 225 g 295 g 305 g Fs 38.5 35.4 30.9 30.4 BL 17.2 N/A 17.2 N/A 17.2 N/A 17.2 N/A Re 3.6 Ohm 3.6 Ohm 3.6 Ohm 3.6 Ohm Le 3.5 mH 3.5 mH 3.5 mH 3.5 mH Qms 7.66 8.33 8.18 8.32 Qes 0.567 0.617 0.706 0.718 Qts 0.528 0.574 0.65 0.661 Xmax 23 mm 23 mm 23 mm 23 mm Ref SPL @ 1 watt 83.1 dB (86.6@2.83V) 85 dB (88.5@2.83V) 87.3 dB (90.8@2.83V) 90.4 dB (93.9@2.83V) Suggested Sealed .65³ ft 1³ ft 2³ ft 4³ ft Suggested Ported 1.0³ ft 1.25³ ft 3.0³ ft 5.5³ ft Key Features • Extremely rigid non-pressed paper cone assembly • Multilayered polymer foam surround • Polypropylene dust cover with DC logo • Dual 8” OD semi cup progressive roll spider • Extra heavy duty interweaved tinsel lead wire sewn to spider • Cast aluminum black frame • FEA analyzed and optimized motor assembly – Fully CNC machined • Rubber mounting gasket • Chrome spring loaded push terminals • Dual 4 ohm 3” Hi-temp Aluminum voice coil wound on black anodized voice coil former
$329.99
-
DC Audio DC Audio A3 5.0K 5000 Watt Mono Block Car Audio Class D Amplifier/Amp+Bass Knob
The 5.0kw competition series amplifier is a 5,000 watt mono block. It is capable of running up to 18 volts for up to 7,300 watts. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped. It comes with a bass knob and a clipping indicator. For power inputs it will accept dual 0 awg for power and dual 0 awg for ground. Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Variable bass boost • Wired remote control • Clipping indicator • Dual 0 awg power and ground inputs (both must be used) We recommend for installation • 1 upgraded battery under the hood • 1 extra 800ci battery in the rear • Minimum of two 0 awg ran from the front battery to the rear battery • Both 0 awg power and ground inputs on amp must have 0 awg ran to them for a total of 4 runs into the amp • Upgraded aftermarket alternator • Dash mounted voltage meter Specifications Features Voltage 5.0kw Output Power (RMS) 4 ohm 14.4V 900W x 1 2 ohm 2,300W x 1 1 ohm 5,000W x 1 1 ohm 16V 6,000W x 1 1 ohm 18V 7,300W x 1 Input Sensitivity 6V~0.2V Low Pass Filter Switchable ( @ 24 dB Slope) Variable Hz 35~250 Subsonic Filter Switchable ( @ 24dB slope ) Variable Hz 10~50 Bass Boost Variable dB 0-9dB Frequency Response Hz 15-270 Signal to Noise Ratio dB 100 Damping factor 150< Efficiency @ 4ohm % Over 90% THD @ 4ohms Less than 0.1% Fuse Rating 500 Amps Linked Fuse Rating 1000 Amps Indicator Power Yes Protection Yes Clip Yes Speaker & Power terminal Mold Type Yes Power Gauge 0Ga Heatsink Length inch/mm 25.59"/650mm Heatsink Width inch/mm 9.38"/66mm Heatsink Height inch/mm 2.35"/59.6mm Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Variable bass boost • Wired remote control • Clipping indicator • Dual 0 awg power and ground inputs (both must be used)
$2,063.60 $1,649.99
-
Kicker Kicker 45L7R122 1200W Dual 2 Ohm 12" Subwoofer/Sub Solobaric L7R L7 L7R122
The 12-inch L7R Square Sub moves more air and delivers bigger bass, so you get more bump out of every watt! The engineers at KICKER invented the original square sub right here in Stillwater, Oklahaoma. Designed to give you more bass, yet take up no more air space than a standard round sub. Welcome to the incredible world of the L7R! Dual Two-Ohm Voice Coil Wrap Around Gasketing Patented Ribbed Corners Injection-Molded SoloKon™ Woofer 360-Degree Back Bracing UniPlate™ Back Plate And Pole Piece Bumped Back Plate Thick Tinsel Leads Large Ceramic Magnet Steel Basket With Spoke Design Nickel Plated Speaker Terminals The L7R 12-Inch Subwoofer works best with 600 watts of recommended power in a sealed or ported enclosure. See below for more details. Specifications SIZE [in, cm]:12, 30 IMPEDANCE [Ohms]:4 DVC POWER WATTS [peak/RMS]:1200/600 SENSITIVITY [dB 1w/1m]:86.7 MOUNTING DEPTH [in, cm]:6-7/8, 17.4 MOUNTING DIAMETER [in, cm]:11-1/16, 28.1 MIN SEALED BOX VOL [cu. ft, L]:.88, 24.92 MAX SEALED BOX VOL [cu. ft, L]:2, 56.64 MIN VENTED BOX VOL [cu. ft, L]:1.75, 49.6 MAX VENTED BOX VOL [cu. ft, L]:3.25, 92 What's in the Box:1 - 12" Subwoofer, 1 - install manual, 2 - Kicker stickers
$299.99 $269.99
-
Kicker Kicker 45L7R124 1200W Dual 4 Ohm 12" Subwoofer/Sub Solobaric L7R L7 L7R124
The 12-inch L7R Square Sub moves more air and delivers bigger bass, so you get more bump out of every watt! The Original Originator, n. (əˈrijəˌnādər): see KICKER The engineers at KICKER invented the original square sub right here in Stillwater, Oklahaoma. Designed to give you more bass, yet take up no more air space than a standard round sub. Welcome to the incredible world of the L7R! Dual Four-Ohm Voice Coil Wrap Around Gasketing Patented Ribbed Corners Injection-Molded SoloKon™ Woofer 360-Degree Back Bracing UniPlate™ Back Plate And Pole Piece Bumped Back Plate Thick Tinsel Leads Large Ceramic Magnet Steel Basket With Spoke Design Nickel Plated Speaker Terminals The L7R 12-Inch Subwoofer works best with 600 watts of recommended power in a sealed or ported enclosure. See below for more details. Specifications SIZE [in, cm]:12, 30 IMPEDANCE [Ohms]:4 DVC p>POWER WATTS [peak/RMS]:1200/600 SENSITIVITY [dB 1w/1m]:86.7 MOUNTING DEPTH [in, cm]:6-7/8, 17.4 MOUNTING DIAMETER [in, cm]:11-1/16, 28.1 MIN SEALED BOX VOL [cu. ft, L]:.88, 24.92 MAX SEALED BOX VOL [cu. ft, L]:2, 56.64 MIN VENTED BOX VOL [cu. ft, L]:1.75, 49.6 MAX VENTED BOX VOL [cu. ft, L]:3.25, 92 What's in the Box:1 - 12" Subwoofer, 1 - install manual, 2 - Kicker stickers
$299.99 $269.99
-
Colossal Sounds Ultra U-15 15" 2500w Car Audio Subwoofer
The Colossal Sounds Ultra 15" subwoofer combines high-output SPL performance with accurate daily-driver sound. This 15-inch ground-pounder is designed for strong, efficient output across a wide range of music.Its cooling-focused motor assembly, non-pressed paper cone, carbon-fiber dust cap, Nomex spider pack, heavy-duty sewn-in lead wires, and cast-aluminum basket are engineered for durability, cone control, and consistent daily output.
$599.99
-
Basshead Supply Sundown Audio Single 10" SAV3 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio SAV3 10" subwoofer. Specifications: 0.988121 cubic feet net enclosure 35.0 hz tuning 14.38 sq inches of port 11.5" x 1.235151" port dimensions 9.5" subwoofer cut out 3/4" triple refined MDF construction Solid 1" baffle for ultimate strength Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 13.0" tall 20.5" wide 13.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio SAV3 10" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 3/4" triple refined MDF — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 3/4" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$246.59
-
Basshead Supply Sundown Audio Single 12" XV4 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio XV4 12" subwoofer. Specifications: 2.464435 cubic feet net enclosure 31.0 hz tuning 36.68 sq inches of port 14.0" x 2.582728" port dimensions 11.19" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 16.0" tall 26.875" wide 19.75" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio XV4 12" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$399.59
-
Basshead Supply Sundown Audio Dual 15" SAV3 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio SAV3 15" subwoofer. Specifications: 6.966247 cubic feet net enclosure 32.0 hz tuning 101.75 sq inches of port 18.5" x 5.473479" port dimensions 14.01" subwoofer cut out 3/4" triple refined MDF construction Solid 1" baffle for ultimate strength 3/4" center baffle brace Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 23.375" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio SAV3 15" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 3/4" triple refined MDF — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 3/4" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$638.39
-
Basshead Supply Sundown Audio Single 18" NSV6 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio NSV6 18" subwoofer. Specifications: 7.0 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.625" port dimensions 16.69" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio NSV6 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$803.39
-
Ampere Audio Ampere Audio AA-3K 3,000W Mono Block Car Amplifier – High Power Car Audio Amp
Unleash Serious Performance with the Ampere Audio AA-3K Car Amplifier When it comes to building a powerful bass system, having the right amplifier can make all the difference. Many enthusiasts struggle with amplifiers that promise big numbers but fail to deliver consistent performance when it matters most. Whether you're upgrading your daily driver, building a weekend demo vehicle, or simply looking for reliable power for your subwoofers, you need an amplifier that combines output, efficiency, and control. The Ampere Audio AA-3K was designed to do exactly that. Why Reliable Power Matters An amplifier is the foundation of any subwoofer system. When an amplifier runs out of power, overheats, or clips excessively, performance suffers and your equipment is put at risk. Weak amplifiers can leave subwoofers underpowered, while poorly designed amplifiers often struggle to maintain clean output during demanding listening sessions. The AA-3K eliminates those concerns by delivering a true balance of power and reliability. Built around a high-efficiency Class D platform and engineered with a robust Dual MOSFET PWM power supply, it provides the current your subwoofers need while maintaining stable operation under heavy loads. Built for Bass Enthusiasts The AA-3K is designed to produce up to 3,000 watts RMS at 1 ohm and can be strapped with a second amplifier for an incredible 6,000 watts RMS of combined output. Whether you're powering a single high-performance subwoofer or multiple drivers in a larger system, the AA-3K delivers the authority needed to bring your music to life. Key features include: Dual MOSFET PWM power supply for stable, efficient power delivery Advanced Class D technology for high output with minimal heat Strapping capability for 6,000W performance Wired remote with real-time voltage, temperature, and clipping display Independent crossovers and adjustable phase for precision tuning Control That Lets You Fine-Tune Your System Every vehicle, enclosure, and subwoofer combination is different. That's why the AA-3K includes a complete suite of tuning controls designed to help you get the most from your system. Variable crossover controls allow you to tailor your frequency response, while adjustable phase and bass boost controls help maximize performance based on your installation. The included wired remote gives you real-time access to critical system information, including amplifier voltage, operating temperature, and clipping status. This allows you to monitor performance and make adjustments without leaving the driver's seat. Built to Perform Day After Day The AA-3K was designed for enthusiasts who demand more than just peak numbers. With advanced protection circuitry guarding against thermal overload, voltage fluctuations, speaker shorts, and DC offset, this amplifier is built to withstand the demands of real-world use. Whether you're chasing higher output, upgrading your current setup, or building a system that simply gets loud and stays reliable, the Ampere Audio AA-3K delivers the performance, control, and durability needed to take your bass to the next level. Technical Specifications: Power Output (RMS @ 14.4V): 1 Ohm Mono: 3,000W 2 Ohm Mono: 2,000W 4 Ohm Mono: 1,000W 2 Ohm Strapped (Linked): 6,000W General: Class D Digital Monoblock Design Dual MOSFET PWM Power Supply Efficiency: >94% Input Sensitivity: 6V – 0.2V Frequency Response: 14Hz – 266Hz Signal-to-Noise Ratio: 99dB Damping Factor: >400 THD: <0.1% Working Voltage: 9V – 16.5V Controls & Filters: Low Pass Filter: 35Hz – 250Hz (24dB/Octave) Subsonic Filter: 10Hz – 50Hz (24dB/Octave) Bass Boost: 0 – 9dB @ 45Hz Phase Shift: 0° – 180° Connectivity & Extras: RCA Inputs / Outputs Master / Slave Linking Capability Wired Remote Control with: Voltage Display Temperature Display Clipping Indicator Protection Features: Thermal Protection Voltage Protection Speaker Short Protection DC Offset Protection Fuse Rating: 300A (External – not built-in) Dimensions: 11.81” (L) x 11.82” (W) x 3.06” (H)
$689.99
-
$21.99
-
XS Power RSV-S6-30Q
14 Volt LTO Battery Equivalent AGM Amp Hours: 60 Cranking Amps: 500 Max Amps: 1,000 Wattage: 5,000 Amp Hours: 20 M6 Terminal Hardware Included 9.25 lbs. This Lithium Titanate Oxide (LTO) RSV Series battery uses a high-power lithium cell, designed for high-burst output (12,000 watts for five seconds) and enhanced reserve capacity. The built-in 2/0 AWG bussing allows up to four positive and four negative hidden direct connections to each module without the need for any externally exposed bussing, while still leaving two easily accessible top terminals and four series or parallel expansion terminals to easily build a bank of batteries of nearly any size imaginable.XS Power Titan8 lithium batteries are also offered in BCI direct fit models that are fully insulated with temperature monitoring built in and are suitable for use in the factory under-hood position.See specifications below.Lithium Titanate Battery- Designed for Peak Capacity
$869.99
-
SMD 250A Ceramic Fuse
SMD Heavy-Duty Ceramic ANL Fuses The SMD (Steve Meade Designs) Ceramic ANL fuse is a high-performance alternative to standard electrical protection. Designed for high-current environments, these fuses prioritize thermal stability and circuit safety. Product Advantages: High-Grade Ceramic Construction: Features a ceramic body that offers superior heat resistance compared to traditional plastic fuses. Warp-Resistant: The ceramic casing is designed to maintain its structural integrity under extreme temperatures, preventing the warping or melting common in standard plastic ANL fuses. High-Current Compatibility: Engineered to handle the rigorous demands of high-output electrical systems. Available Amperage Ratings: Available in pairs for the following ratings: 100A 150A 200A 250A 300A 500A 600A
$27.49
-
SMD UB2ALM Ub-2 (2 Post Bar) Distro Black
SMD UB-2 (2 Post Bar) Power/Ground Distribution Block (Black) Clean up your vehicle's wiring and reduce the risk of engine noise with the SMD UB2ALM distribution block. Designed to centralize your wiring for multiple amplifiers or 12v devices, this versatile 2-post block can be configured for either positive distribution or as a centralized grounding point. Key Features: Versatile Application: Can be utilized as either a power distribution block or a grounding block. Heavy-Duty Construction: Built with a durable 3/4" HDPE base and a protective 3/16" clear acrylic cover. Premium Hardware: Utilizes all stainless steel (or optional copper) hardware for reliable conductivity and corrosion resistance. Universal Compatibility: Accepts any ring terminal with a 5/16" hole. Technical Specifications: Model: UB2ALM (Black) Posts: 2 Terminal Size: Fits 5/16" Ring Terminals Dimensions: 2.65" x 3" x 2" (LxWxH) Origin: Made in California, USA Note: Available in several different colors (select your option below).
$36.29
-
SMD DOUBLEHSFBALM Double Anl Fuse Block Black
SMD Double ANL Fuse Block - High-Temp (Black) Protect your vehicle's electrical system from short circuits and catastrophic damage with the SMD Double ANL Fuse Block. Designed for demanding aftermarket sound systems and heavy-draw accessories like winches and lighting, this industrial-strength 2-spot fuse holder ensures safe and reliable power distribution. Key Features: High-Temperature Design: Engineered to withstand harsh environments. Suitable for under-hood engine compartment mounting, as well as cabin, trunk, or marine applications due to its corrosion-resistant materials. Heavy-Duty Construction: The base is precision-milled from durable HDPE. Premium Hardware: Built utilizing a combination of Aluminum, Stainless Steel, and Copper components for optimal conductivity and longevity. Safety Cover: Includes a 3/16" clear acrylic cover to protect against accidental contact with live terminals. Optimal Placement: Designed to be mounted within 18" of your power source (front battery, alternator, or auxiliary battery bank) for maximum protection. Technical Specifications: Model: DOUBLEHSFBALM (Black) Capacity: 2-Spot (Double) ANL Fuse Holder Base Material: Milled HDPE Cover Material: 3/16" Clear Acrylic Dimensions: 5" x 2.812" x 2" (LxWxH) Origin: Made in the USA
$57.19
-
SMD SINGLEFBALMMOLD Single Anl Fb Fuse Block Black
SMD FB-1 Single ANL Fuse Block (Black) The SMD FB-1 is a professional-grade single ANL fuse holder designed to protect your vehicle’s electrical system from short circuits and fire. This unit is specifically engineered for high-demand applications such as aftermarket audio, winches, lighting, and auxiliary accessories. Key Features: Durable Construction: Features a high-temperature injection-molded body designed to withstand the harsh conditions of an engine bay. Premium Materials: Utilizes an aluminum busbar and landings with stainless steel hardware for long-lasting conductivity and corrosion resistance. Safety Cover: Includes a 3/16" CNC and laser-cut clear acrylic cover to prevent accidental contact with live terminals. Engine Bay & Marine Ready: Built to withstand the elements; suitable for under-hood installations and marine applications. Optimal Placement: For maximum safety, it is recommended to mount this unit within 18" of the power source (battery, alternator, or auxiliary bank). Technical Specifications: Model: SINGLEFBALMMOLD (FB-1) Fuse Type: Single ANL Body Material: High-Temp Injection Molded Hardware: Aluminum and Stainless Steel Cover: 3/16" Clear Acrylic Dimensions: TBD
$32.99
-
SMD 1CHCOP 1 Channel Terminal Cup Copper Black
SMD 1-Channel Heavy Duty Terminal Cup (Copper Black) The SMD 1CHCOP is a high-strength alternative to standard injection-molded plastic terminals. Precision-milled from 3/4" HDPE, this single-channel unit is engineered to remain airtight and structurally sound under extreme subwoofer enclosure pressure. Key Features: Durable Material: Milled from 3/4" HDPE, offering a high strength-to-weight ratio that will not break or leak under grueling box pressure. Premium Hardware: This specific model is equipped with high-quality copper hardware to ensure maximum conductivity and long-term durability. Heavy-Duty Terminals: Features 5/16" bolt terminals designed for a secure electrical connection with standard ring terminals. Reusable Design: Built to withstand multiple installations, allowing the unit to be safely transferred between enclosures when upgrading. Technical Specifications: Model: 1CHCOP Color/Hardware: Black HDPE / Copper Hardware Material: 3/4" Milled HDPE Terminal Size: 5/16" Bolt Cutout Diameter: 2.75" Flange Diameter: 3.75" Dimensions: 3.75" x 3.75" x 1.5" (LxWxH) Origin: Made in the USA
$46.19
-
SMD 2CHG8 2 Channel Terminal Cup Grade 8 Black
SMD 2-Channel Heavy Duty Terminal Cup (Grade 8 Black) The SMD 2CHG8 is a high-strength 2-channel terminal cup designed for high-pressure subwoofer enclosures. Precision-milled from 3/4" HDPE, this unit provides a rigid, airtight alternative to standard plastic terminal cups that often crack or leak under heavy excursion. Key Features: High-Pressure Performance: Milled from solid 3/4" HDPE with a 1/2" body and 1/4" flange to ensure structural integrity in the most demanding enclosures. Grade 8 Hardware: Equipped with high-strength Grade 8 hardware for maximum durability and secure electrical contact. 2-Channel Configuration: Allows for independent wiring of multiple voice coils or drivers through a single terminal location. Industrial Terminals: Features 5/16" bolt terminals compatible with heavy-duty ring terminals. Reusable Design: Built to last a lifetime, this terminal cup can be moved and reinstalled in new enclosures as you upgrade your system. Technical Specifications: Model: 2CHG8 Material: 3/4" Milled HDPE Hardware Type: Grade 8 Steel Terminal Size: 5/16" Bolt Dimensions: 4.625" x 5.857" x 1.5" (LxWxH) Origin: Made in the USA
$31.89
-
Sparked Innovations Sparked Innovations TTB-HS4 Tweet Tweet Blaster 3" Tweeter 4ohm 100W
A mini horn super tweeter; have you ever seen such a thing? Now you have. We call it the Tweet Tweet Blaster, a fun name for a tweeter that does a serious job at delivering loud and clear music. Here at Sparked Innovations, we take our high frequencies very seriously. The Tweet Tweet Blaster was designed for clarity and wide dispersion in a small package. The neodymium motor helps deliver high-power sound with tight control over the lightweight diaphragm. The flared horn might be the smallest in the industry, but it accurately delivers a wide range of high frequencies, even when mounted off-axis from the listener, such as door panel mounting in most vehicles. 3" Tweeter Feature Specification Frequency Response 4,000hz - 20,000hz Sensitivity 101dB RMS Power Handling 100W Motor Material Neodymium Horn Material Cast Aluminum
$32.99
-
Sundown Audio X-Series XV4 10" 3000W RMS Subwoofer
The Sundown Audio 10" 3000W XV4 Subwoofer is engineered for true bass lovers who demand precision and power. Designed with advanced X v.4 coil technology, this subwoofer pushes boundaries with exceptional low-frequency performance and high durability. Whether you’re upgrading your car audio system or building a competition setup, the XV4 delivers massive power handling up to 6000W peak while maintaining clarity and control. It's 30mm Xmax ensures deep, punchy bass notes without distortion, even at high output levels. Built with a strong motor and optimized cone structure, the XV4 offers superior thermal management and consistent performance under pressure. Its 10-inch design fits perfectly into ported enclosures, providing the ideal balance between output and sound quality. Upgrade your ride with the Sundown XV4 — where craftsmanship meets unmatched sound performance. Key Features: Powerful 3000W RMS / 6000W Peak output Advanced X v.4 coil design for improved efficiency 10" subwoofer with deep, accurate bass response Optimized for ported enclosures (1.5 cu ft / 32Hz tuning) 30mm Xmax for maximum excursion and clean bass Heavy-duty motor with 9.25" diameter Durable build for competition-level use Dual 1-Ohm and Dual 2-Ohm impedance options
$749.99
-
Sundown Audio M-Series Drop-In Kit
These are standard drop-in recone kits ONLY. If you need a custom recone kit, you will still need to call us to place your order.There are no refunds or exchanges with drop-in re-cone kits. Please make sure you are ordering the correct model, version and impedance prior to ordering.
$199.99 - $289.99
-
Ciare PW257 Professional 10" Low Frequency Driver
Ciare PW257 Professional 10" Low Frequency Driver: Precision Meets Power The PW257 is a professional-grade 10-inch low-frequency driver engineered for high-impact sonic performance without compromising clarity. Designed for high-output mid-bass arrays or compact low-frequency systems, it is rated at 400 W AES continuous power handling with 800 W program capability. With a sensitivity of 96 dB, the PW257 efficiently converts power into clean, undistorted output, making it well suited for touring rigs, club installs, and demanding pro-audio environments. At its core is a massive 3-inch (75 mm) voice coil wound on an aluminum former for efficient heat dissipation. Combined with a Nomex fabric surround and a rigid aluminum basket, this construction ensures excellent thermal control, mechanical stability, and tight, punchy low-end performance defined by an Fs of 57 Hz and an Xmax of 5.5 mm. Optimized for vented enclosures, the PW257 delivers a wide frequency range from 50 Hz to 3000 Hz, making it an excellent choice for high-performance 2-way systems or dedicated mid-bass applications with a distinctly professional sound signature. Data Sheet PW257 PROFESSIONAL 10" DRIVER SPECIFICATIONS Nominal Diameter 250 mm (10 in) Nominal Power Handling (AES) 400 W Program Power 800 W Sensitivity (2.83V/1m) 96 dB Frequency Range 50 Hz – 3000 Hz Nominal Impedance 8 ohms Voice Coil Diameter 75 mm (3 in) Winding Material / Former Aluminum Basket Material Aluminum Net Weight 5 kg (11.01 lb) THIELE-SMALL PARAMETERS ELECTRO-ACOUSTIC PARAMETERS Fs (Resonant Frequency) 57 Hz Qes / Qms / Qts 0.33 / 3.2 / 0.3 Vas (Equivalent Volume) 31 dm³ (1.09 ft³) Xmax (Linear Excursion) 5.5 mm (0.22 in) Bl (Force Factor) 15.86 Tm Sd (Effective Cone Area) 353 cm² (54.72 in²) EBP (Efficiency Bandwidth Product) 173 MOUNTING & ENCLOSURE MOUNTING & ENCLOSURE INFO Overall Diameter 268 mm (10.55 in) Baffle Cutout Diameter 235 mm (9.25 in) Depth 120 mm (4.72 in) Recommended Enclosure Vented Box / 14 dm³ (0.494 ft³) Surround Material Nomex Fabric
$252.61
-
AUDIO ACE JESTER 15" DUAL 2 OHM SUBWOOFER
Product Overview: Audio Ace’s Powerful and Versatile 15-Inch Driver The Audio Ace Jester 15" D2 is designed to achieve a high level of both Sound Quality (SQ) and Sound Pressure Level (SPL), rated at a formidable 3, 000W RMS. Its design includes a fairly low Free Air Resonance (Fs) and a powerful 300 oz motor structure, making it highly versatile for great sound across a wide range of music. Whether you're aiming for extreme sound levels or just wanting to enjoy powerful bass in your daily driver, the Jester is an excellent choice. It features a heavy-duty die-cast aluminum basket, a 3-inch BACCAW 4-layer voice coil, and a 4-layer 10-inch spider suspension. The Dual 2 Ohm impedance provides a flexible path to a 1 Ohm or 4 Ohm final load. AUDIO ACE JESTER 15" DUAL 2 OHM SPECIFICATIONS Model Jester 15" RMS Power Handling 3,000 Watts Voice Coil 3" BACCAW 4 Layer Coil Magnet Structure 300 oz Suspension 4 Layer 10" Spider Basket Heavy Duty Die Cast Aluminum Nominal Impedance Dual 2 Ohm (D2) Cutout Diameter 14.331 in Mounting Depth 10.07 in LOSS FACTORS & MISC PARAMETERS Total Q (Qts) 0.464 Mechanical Q (Qms) 5.368 Electrical Q (Qes) 0.508 Free Air Resonance (Fs) 33.7 Hz Sensitivity (Lm) 86.10 dB Equivalent Volume (Vas) 33.8589 L Moving Mass (Mms) 551.552 g BL Factor (Bl) 28.449 DC Resistance (Re) 3.52 Ohms Effective Piston Area (Sd) 769.45
$599.99
