DC Audio
-
Basshead Supply DC Audio Dual 15" Level 5 Ported Enclosure
Custom built enclosure specifically for the DC Audio Level 5 15" subwoofer. Specifications: 8.5 cubic feet net enclosure 31.0 hz tuning 122.4 sq inches of port 20.0" x 6.12" port dimensions 14.25" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 22.0" tall 47.625" wide 22.625" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio Level 5 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,653.99
-
Basshead Supply DC Audio Dual 15" Level 6 Ported Enclosure
Custom built enclosure specifically for the DC Audio Level 6 15" subwoofer. Specifications: 8.5 cubic feet net enclosure 31.0 hz tuning 122.4 sq inches of port 20.0" x 6.12" port dimensions 14.25" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 22.0" tall 47.625" wide 22.625" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio Level 6 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,653.99
-
Basshead Supply DC Audio Dual 12" NEO 3.5 Ported Enclosure
Custom built enclosure specifically for the DC Audio NEO 3.5 12" subwoofer. Specifications: 4.0 cubic feet net enclosure 32.0 hz tuning 58.125 sq inches of port 15.0" x 3.875" port dimensions 11.15" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 17.0" tall 36.818208" wide 20.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio NEO 3.5 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$839.99
-
Basshead Supply DC Audio Dual 15" NEO 3.5 Ported Enclosure
Custom built enclosure specifically for the DC Audio NEO 3.5 15" subwoofer. Specifications: 8.5 cubic feet net enclosure 31.0 hz tuning 122.4 sq inches of port 20.0" x 6.12" port dimensions 14.25" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 22.0" tall 47.625" wide 22.625" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio NEO 3.5 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,653.99
-
Basshead Supply DC Audio Dual 12" XL Elite Ported Enclosure
Custom built enclosure specifically for the DC Audio XL Elite 12" subwoofer. Specifications: 4.0 cubic feet net enclosure 32.0 hz tuning 58.12 sq inches of port 15.0" x 3.875" port dimensions 11.15" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 17.0" tall 36.875" wide 20.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio XL Elite 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$839.99
-
Basshead Supply DC Audio Dual 15" NEO 4.0 Ported Enclosure
Custom built enclosure specifically for the DC Audio NEO 4.0 15" subwoofer. Specifications: 8.5 cubic feet net enclosure 31.0 hz tuning 122.4 sq inches of port 20.0" x 6.12" port dimensions 14.25" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 22.0" tall 47.625" wide 22.625" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio NEO 4.0 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,653.99
-
Basshead Supply DC Audio Dual 12" Level 3 Ported Enclosure
Custom built enclosure specifically for the DC Audio Level 3 12" subwoofer. Specifications: 3.0 cubic feet net enclosure 33.0 hz tuning 43.2 sq inches of port 13.5" x 3.2" port dimensions 11.0" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 3/4" (18mm) center baffle brace 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 15.0" tall 33.625" wide 18.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio Level 3 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$661.99
-
Basshead Supply DC Audio Dual 15" XL Elite Ported Enclosure
Custom built enclosure specifically for the DC Audio XL Elite 15" subwoofer. Specifications: 8.5 cubic feet net enclosure 31.0 hz tuning 122.4 sq inches of port 20.0" x 6.12" port dimensions 14.25" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 22.0" tall 47.625" wide 22.625" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio XL Elite 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,653.99
-
Basshead Supply DC Audio Dual 10" XL SPL Ported Enclosure
Custom built enclosure specifically for the DC Audio XL SPL 10" subwoofer. Specifications: 2.5 cubic feet net enclosure 34.0 hz tuning 36.0 sq inches of port 12.0" x 3.0" port dimensions 9.35" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 14.0" tall 29.875" wide 20.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio XL SPL 10" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$665.99
-
Basshead Supply DC Audio Dual 12" XL SPL Ported Enclosure
Custom built enclosure specifically for the DC Audio XL SPL 12" subwoofer. Specifications: 4.0 cubic feet net enclosure 32.0 hz tuning 58.125 sq inches of port 15.0" x 3.875" port dimensions 11.0" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 17.0" tall 36.810919" wide 20.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio XL SPL 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$839.99
-
DC Audio DC Audio 8M3 8" 600 Watt RMS/1200 Watt Peak Dual-2-Ohm Car Audio Subwoofer/Sub
The m3 8 is an 8" long X-Max subwoofer. Long hours in the R&D department is what it took to develop the newest version of our 8" subwoofer. We designed a tall roll stitched surround, oversized spiders, and a tall cast frame that allows for extreme amounts of cone travel. All of these newly designed parts allow for lower frequency reproduction. The bolted down spaced spider design keeps it all linear. The m3 8 uses a gap cooled design to allow the 2" copper coil to thermally take more power than other 2" coil motors with the traditional pole venting. Key Features • Extremely rigid non-pressed paper cone assembly • High Roll Stitched Multilayered reinforced polymer foam surround • Rigid propylene dust cover with White DC logo • Bolted down & spaced Linear roll spiders • Sewn flat heavy duty tinsel lead wire • Custom Cast aluminum black frame • FEA analyzed and optimized motor assembly – Fully CNC machined • Rubber mounting gasket and custom tooled motor boot. • DVC 2.0” Copper voice coil. Size 8" Mounting Depth 5.75" Mounting Hole Diameter 7.25" Outside Driver Diameter 8.5" Weight 18 lbs VC Diameter 2" Displacement .1³ ft Magnet Weight 15 lbs Power Handling RMS/Peak 600/1200 Impedance (Ohm) D2 Sd 201.93cm² Vas 7.3L Cms 0.135 mm/n Mms 150.66 g Fs 35.3Hz BL 17.9 N/A Re 6.28 Ohm Le 5 mH Qms 6.68 Qes 0.66 Qts 0.601 Xmax 18mm Ref SPL @ 1 watt 78.7 Suggested Ported .75^3 ft
$224.99
-
DC Audio DC Audio Level 4 15" Dual-2-Ohm 1500W RMS / 3000W Peak Car Audio Subwoofer/Sub
The Level 4 m3 was designed to take even more power and get even louder than the m2. With fantastic power handling and smashing lows its hard to beat. The Level 4 sub is a large triple stacked motor with a chrome top plate and T yoke yielding 23.5mm of X-Max. Furthermore, you get the upgraded triple progressive spiders, cone, surround, 3" coil, cast basket, push terminals and upgraded lead wire sewn to the spider. This sub is rated at 1500w RMS and 3000w peak. Sub Size 10" 12" 15" 18" Mounting Depth 6.25" 6.75" 8" 9.5" Mounting Hole Diameter 9.25" 11" 14" 16.75" Outside Driver Diameter 11.0" 12.5" 15.7" 18.5" Motor Width 7.75" 7.75" 7.75" 7.75" Weight 32lbs 33lbs 33.5lbs 36lbs VC Diameter 3" 3" 3" 3" Displacement .16³ ft .18³ ft .21³ ft .26³ ft Magnet Weight 29lbs 29lbs 29lbs 29lbs Power Handling RMS/Peak 1500 / 3000 1500 / 3000 1500 / 3000 1500 / 3000 Impedance (Ohm) D1 or D2 D1 or D2 D1 or D2 D1 or D2 Sd 324cm² 481cm² 823cm² 1217cm² Vas 12.42 liters 27.38 liters 80.16 liters 175.29 liters Cms .085 mm/N .085 mm/N .085 mm/N .085 mm/N Mms 184.5 g 207.53 g 318.5 g 427.53 g Fs 40.2 Hz 37.9 Hz 30.6 Hz 26.4 Hz BL 19.18 NA 19.18 NA 19.18 NA 19.18 NA Re 3.82 Ohm 3.82 Ohm 3.82 Ohm 3.82 Ohm Le 3.78 mH 3.78 mH 3.78 mH 3.78 mH Qms 7.77 8.24 10.2 11.82 Qes .49 .52 .644 .746 Qts .461 .489 .60 .701 Xmax 23.5 mm 23.5 mm 23.5 mm 23.5 mm Ref SPL @ 1 watt 84 dB 86.4 dB 87.4 dB 88.2 dB Suggested Sealed .75³ ft 1³ ft 2.75³ ft 4³ ft Suggested Ported 1.0³ ft 1.5³ ft 3.0³ ft 5.5³ ft Key Features • Extremely rigid non-pressed paper cone assembly • Multilayered polymer foam surround • Polypropylene dust cover with DC logo • Triple 8” OD semi cup progressive roll spider • Extra heavy duty interweaved tinsel lead wire sewn to spider • Cast aluminum black frame • FEA analyzed and optimized motor assembly – Fully CNC machined • Rubber mounting gasket • Chrome spring loaded push terminals • 3” Hi-temp Aluminum voice coil wound on black anodized voice coil former
$409.99
-
DC Audio DC Audio A3 1.2K 1200 Watt Mono Block Car Audio Class D Amplifier/Amp+Bass Knob
The 1.2kw competition series amplifier is a 1,200 watt mono block. It is capable of running up to 16 volts for up to1,450 watts. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped. It comes with a bass knob. For power inputs it will accept 4 awg for power and 4 awg for ground. Features Voltage 1.2kw Output Power (RMS) 4 ohm 14.4V 350Wx1 2 ohm 14.4V 700Wx1 1 ohm 14.4V 1,200Wx1 1 ohm 16V 1,450Wx1 1 ohm 18V No Input Sensitivity 6V~0.2V Low high Filter Switchable ( @ 24 dB Slope) Variable Hz 35~250 Subsonic Filter Switchable ( @ 24 dB Slope) Variable Hz 10~50 Bass Boost Variable dB 0-9dB Frequency Response Hz 15-270 Signal to Noise Ratio dB 100 Damping factor 100< Efficiency @ 4ohm % 81% THD @ 4ohms Less than 0.1% Fuse Rating 120 Amps Indicator Power Yes Protection Yes Clip No Speaker & Power terminal Mold Type Yes Power Gauge 4Ga Heatsink Length 16.5" (419mm) Heatsink Width 9.38" (238mm) Heatsink Height 2.35" (59.6mm) Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Variable bass boost • Wired remote control
$449.99 $314.99
-
DC Audio DC Audio A3 2.0K 2000 Watt Mono Block Car Audio Class D Amplifier/Amp+Bass Knob
The 2.0kw competition series amplifier is a 2,000 watt mono block. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped. It comes with a bass knob and a clipping indicator. For power inputs it will accept 0 awg for power and 0 awg for ground. Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Variable bass boost • Wired remote control • Clipping indicator We recommend for installation • 1 upgraded battery under the hood • 1 extra battery in the rear • Minimum of one 0 awg ran from the front battery to the rear battery • Upgraded aftermarket alternator • Dash mounted voltage meter Specifications Features Voltage 2.0kw Output Power (RMS) 4 ohm 14.4V 600W x 1 2 ohm 1,200W x 1 1 ohm 2,000W x 1 1 ohm 16V No 1 ohm 18V No Input Sensitivity 6V~0.2V Low Pass Filter Switchable ( @ 24 dB Slope) Variable Hz 35~250 Subsonic Filter Switchable ( @ 24dB slope ) Variable Hz 10~50 Bass Boost Variable dB 0-9dB Frequency Response Hz 15-270 Signal to Noise Ratio dB 100 Damping factor 150< Efficiency @ 4ohm % Over 90% THD @ 4ohms Less than 0.1% Fuse Rating 200 Amps Linked Fuse Rating 400 Amps Indicator Power Yes Protection Yes Clip Yes Speaker & Power terminal Mold Type Yes Power Gauge 0Ga Heatsink Length inch/mm 17.72" / 450mm Heatsink Width inch/mm 9.38"/238mm Heatsink Height inch/mm 2.35"/59.6mm Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Variable bass boost • Wired remote control • Clipping indicator
$858.00 $674.99
-
DC Audio DC Audio A3 3.5K 3500 Watt Mono Block Car Audio Class D Amplifier/Amp+Bass Knob
The 3.5kw competition series amplifier is a 3,500 watt mono block. It is capable of running up to 18 volts for up to 5,100 watts. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped. It comes with a bass knob and a clipping indicator. For power inputs it will accept 0 awg for power and 0 awg for ground. Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Variable bass boost • Wired remote control • Clipping indicator We recommend for installation • 1 upgraded battery under the hood • 1 extra battery in the rear • Minimum of one 0 awg ran from the front battery to the rear battery • Upgraded aftermarket alternator • Dash mounted voltage meter Specifications Features Voltage 3.5kw Output Power (RMS) 4 ohm 14.4V 750W x 1 2 ohm 1,800W x 1 1 ohm 3,500W x 1 1 ohm 16V 4,000W x 1 1 ohm 18V 5,100Wx1 Input Sensitivity 6V~0.2V Low Pass Filter Switchable ( @ 24 dB Slope) Variable Hz 35~250 Subsonic Filter Switchable ( @ 24dB slope ) Variable Hz 10~50 Bass Boost Variable dB 0-9dB Frequency Response Hz 15-270 Signal to Noise Ratio dB 100 Damping factor 150< Efficiency @ 4ohm % Over 90% THD @ 4ohms Less than 0.1% Fuse Rating 300 Amps Linked Fuse Rating 600 Amps Indicator Power Yes Protection Yes Clip Yes Speaker & Power terminal Mold Type Yes Power Gauge 0Ga Heatsink Length inch/mm 21.26"/540mm Heatsink Width inch/mm 9.38"/238mm Heatsink Height inch/mm 2.35"/59.6mm Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Variable bass boost • Wired remote control • Clipping indicator
$1,386.00 $1,099.99
-
DC Audio DC Audio CS1000X4 960 Watt 4-Channel Car Audio Amplifier/Amp 150x4 240x4
Amplifier Description The DC-SF1000x4 is a compact series amplifier capable of making 1,000 watts. Its High power 4 Channel amplifier. It has 4awg inputs and onboard clipping lights. Designed to make more power in less space. Output Power (RMS) 4 ohm 150Wx4 @ 14.4 Volts 2 ohm 240Wx4 @ 14.4 Volts 4ohm rms bridged power : 500W x 2 Key Features • 2 ohm stable • Variable low pass filter • Variable High pass filter • Full Range Output • 9-16 Volts Capable • Onboard clip light
$499.99 $349.99
-
DC Audio DC Audio DC61-2 300W 6.5" Component SQ Speakers w/ Mids+Tweeters+Wave Guides
DC Audio’s New Convertible, High-performance Speaker Line. These New Speakers from DC Audio can be mounted as a coaxial speaker in most standard 6.5” speaker holes OR you can remove the tweeter and pole from the center of the speaker, install the wave guide and mount the tweeter anywhere you want using the supplied flush or angle tweeter cups making them a versatile speaker system that will do just about anything you need. Speakers are considered SQ Speakers, when you’re looking for a speaker capable of extreme sound quality as well as output look no further than the DC Audio 61-2 Sets include 2 Mids / 2 Tweeters / 2 Wave Guides / 2 Flush Tweeter Mounts / 2 Angle Tweeter mounts. 20mm soft-dome tweeters. High performance polypropylene tweeter crossover capacitors. Tweeter Protection. Specifications ⦁ POWER HANDLING RMS 75 watts ⦁ POWER HANDLING PEAK 150 watts ⦁ IMPEDANCE 4 Ohm ⦁ CROSSOVER POINT 65 Hz ⦁ FREQUENCY RESPONSE +/- 10DB 55Hz - 22,000Hz ⦁ Diameter 6.5” speaker size ⦁ Mounting Depth 2.50" Speaker Features ⦁ Rubber inverted Surround ⦁ Silk Dome Tweeter ⦁ Water Resistant Paper Cones ⦁ Coaxil or Component installtions ⦁ lots of mounting options ⦁ built in tweeter crossover cap ⦁ built in wattage tweeter protection
$239.99
-
DC Audio DC Audio Level 3 15" Dual-2-Ohm 1000W RMS / 2000W Peak Car Audio Subwoofer/Sub
The level 3 sub is the ultimate daily driver sub. It puts out the low lows with lots of output designed for sealed or ported enclosures. The Level 3 sub is a triple stacked FEA optimized motor wrapped in a magnet boot, chrome top plate and T yoke. The deep gap offers more X-max for a total of 22.5mm. This sub also comes with dual upgraded progressive spiders, cone, surround, 3" voice coil, cast basket, push terminals, and upgraded sewn down lead wire. We give the Level 3 a power rating of 1000w RMS/2000w peak. Sub Size 10" 12" 15" 18" Mounting Depth 6.25" 6.75" 8" 9.5" Mounting Hole Diameter 9.35" 11" 14" 16.75" Outside Driver Diameter 11" 12.5" 15.7" 18.5" Motor Width 7" 7" 7" 7" Weight 20lbs 20.5lbs 21.5lbs 22lbs VC Diameter 3" 3" 3" 3" Displacement .15³ ft .16³ ft .18³ ft .22³ ft Magnet Weight 18lbs 18lbs 18lbs 18lbs Power Handling RMS/Peak 1000 / 2000 1000 / 2000 1000 / 2000 1000 / 2000 Impedance (Ohm) D1/D2/D4 D1/D2/D4 D1/D2/D4 D1/D2/D4 Sd 324cm² 481cm² 823cm² 1217cm² Vas 13.16 liters 28.99 liters 84.88 liters 185.6 liters Cms 0.09 mm/N 0.09 mm/N 0.09 mm/N 0.09 mm/N Mms 190 g 225 g 295 g 305 g Fs 38.5 35.4 30.9 30.4 BL 17.2 N/A 17.2 N/A 17.2 N/A 17.2 N/A Re 3.6 Ohm 3.6 Ohm 3.6 Ohm 3.6 Ohm Le 3.5 mH 3.5 mH 3.5 mH 3.5 mH Qms 7.66 8.33 8.18 8.32 Qes 0.567 0.617 0.706 0.718 Qts 0.528 0.574 0.65 0.661 Xmax 23 mm 23 mm 23 mm 23 mm Ref SPL @ 1 watt 83.1 dB (86.6@2.83V) 85 dB (88.5@2.83V) 87.3 dB (90.8@2.83V) 90.4 dB (93.9@2.83V) Suggested Sealed .65³ ft 1³ ft 2³ ft 4³ ft Suggested Ported 1.0³ ft 1.25³ ft 3.0³ ft 5.5³ ft Key Features • Extremely rigid non-pressed paper cone assembly • Multilayered polymer foam surround • Polypropylene dust cover with DC logo • Dual 8” OD semi cup progressive roll spider • Extra heavy duty interweaved tinsel lead wire sewn to spider • Cast aluminum black frame • FEA analyzed and optimized motor assembly – Fully CNC machined • Rubber mounting gasket • Chrome spring loaded push terminals • Dual 4 ohm 3” Hi-temp Aluminum voice coil wound on black anodized voice coil former
$329.99
-
DC Audio DC Audio A3 5.0K 5000 Watt Mono Block Car Audio Class D Amplifier/Amp+Bass Knob
The 5.0kw competition series amplifier is a 5,000 watt mono block. It is capable of running up to 18 volts for up to 7,300 watts. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped. It comes with a bass knob and a clipping indicator. For power inputs it will accept dual 0 awg for power and dual 0 awg for ground. Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Variable bass boost • Wired remote control • Clipping indicator • Dual 0 awg power and ground inputs (both must be used) We recommend for installation • 1 upgraded battery under the hood • 1 extra 800ci battery in the rear • Minimum of two 0 awg ran from the front battery to the rear battery • Both 0 awg power and ground inputs on amp must have 0 awg ran to them for a total of 4 runs into the amp • Upgraded aftermarket alternator • Dash mounted voltage meter Specifications Features Voltage 5.0kw Output Power (RMS) 4 ohm 14.4V 900W x 1 2 ohm 2,300W x 1 1 ohm 5,000W x 1 1 ohm 16V 6,000W x 1 1 ohm 18V 7,300W x 1 Input Sensitivity 6V~0.2V Low Pass Filter Switchable ( @ 24 dB Slope) Variable Hz 35~250 Subsonic Filter Switchable ( @ 24dB slope ) Variable Hz 10~50 Bass Boost Variable dB 0-9dB Frequency Response Hz 15-270 Signal to Noise Ratio dB 100 Damping factor 150< Efficiency @ 4ohm % Over 90% THD @ 4ohms Less than 0.1% Fuse Rating 500 Amps Linked Fuse Rating 1000 Amps Indicator Power Yes Protection Yes Clip Yes Speaker & Power terminal Mold Type Yes Power Gauge 0Ga Heatsink Length inch/mm 25.59"/650mm Heatsink Width inch/mm 9.38"/66mm Heatsink Height inch/mm 2.35"/59.6mm Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Variable bass boost • Wired remote control • Clipping indicator • Dual 0 awg power and ground inputs (both must be used)
$2,063.60 $1,649.99
-
DC Audio DC Audio CS-2100X1 1100 Watt Mono Block Car Audio Class D Amplifier/Amp+Bass Knob
Amplifier Description The DC-CS2100x1 is a compact series amplifier capable of making 2,500 watts. Its High power mono block. It has 1/0 inputs and onboard clipping lights. It also comes with a bass knob and a clipping indicator. Designed to make more power in less space. Output Power (RMS) 4 ohm 1000Wx1 @ 14.4 Volts 2 ohm 1500Wx1 @ 14.4 Volts 1 ohm mono 2100x1 @ 14.4 Volts 1 ohm mono 2450x1 @ 16.0 Volts Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Wired Bass Knob remote control W/ Clip light • RCA Pass Thru • Onboard clip light AMP SPECS: DC Amp Model: CS 2100x1 Input Sensitivity 6V~0.2V Frequency Response 10Hz~250KHz 24dB / Octave Crossover YES Low Pass 35Hz ~ 250Hz Subsonic Filter 10Hz-50hz Bass Boost @45hz NO Phase Shift NO Remote Control Yes Clip Indicator Yes Signal to Noise Ratio dB90 Damping Factor 150< THD @ 4ohms Less than 0.1% Fuse Rating External 250 amp LED Status Lights Power/Protect/Clip Master/Slave NO Heatsink Length 12.99"/330mm Heatsink Width 4.72"/120mm Heatsink Height 1.96"/50.0mm
$399.99
-
DC Audio DC Audio Level 4 15" Dual-1-Ohm 1500W RMS / 3000W Peak Car Audio Subwoofer/Sub
The Level 4 m3 was designed to take even more power and get even louder than the m2. With fantastic power handling and smashing lows its hard to beat. The Level 4 sub is a large triple stacked motor with a chrome top plate and T yoke yielding 23.5mm of X-Max. Furthermore, you get the upgraded triple progressive spiders, cone, surround, 3" coil, cast basket, push terminals and upgraded lead wire sewn to the spider. This sub is rated at 1500w RMS and 3000w peak. Sub Size 10" 12" 15" 18" Mounting Depth 6.25" 6.75" 8" 9.5" Mounting Hole Diameter 9.25" 11" 14" 16.75" Outside Driver Diameter 11.0" 12.5" 15.7" 18.5" Motor Width 7.75" 7.75" 7.75" 7.75" Weight 32lbs 33lbs 33.5lbs 36lbs VC Diameter 3" 3" 3" 3" Displacement .16³ ft .18³ ft .21³ ft .26³ ft Magnet Weight 29lbs 29lbs 29lbs 29lbs Power Handling RMS/Peak 1500 / 3000 1500 / 3000 1500 / 3000 1500 / 3000 Impedance (Ohm) D1 or D2 D1 or D2 D1 or D2 D1 or D2 Sd 324cm² 481cm² 823cm² 1217cm² Vas 12.42 liters 27.38 liters 80.16 liters 175.29 liters Cms .085 mm/N .085 mm/N .085 mm/N .085 mm/N Mms 184.5 g 207.53 g 318.5 g 427.53 g Fs 40.2 Hz 37.9 Hz 30.6 Hz 26.4 Hz BL 19.18 NA 19.18 NA 19.18 NA 19.18 NA Re 3.82 Ohm 3.82 Ohm 3.82 Ohm 3.82 Ohm Le 3.78 mH 3.78 mH 3.78 mH 3.78 mH Qms 7.77 8.24 10.2 11.82 Qes .49 .52 .644 .746 Qts .461 .489 .60 .701 Xmax 23.5 mm 23.5 mm 23.5 mm 23.5 mm Ref SPL @ 1 watt 84 dB 86.4 dB 87.4 dB 88.2 dB Suggested Sealed .75³ ft 1³ ft 2.75³ ft 4³ ft Suggested Ported 1.0³ ft 1.5³ ft 3.0³ ft 5.5³ ft Key Features • Extremely rigid non-pressed paper cone assembly • Multilayered polymer foam surround • Polypropylene dust cover with DC logo • Triple 8” OD semi cup progressive roll spider • Extra heavy duty interweaved tinsel lead wire sewn to spider • Cast aluminum black frame • FEA analyzed and optimized motor assembly – Fully CNC machined • Rubber mounting gasket • Chrome spring loaded push terminals • 3” Hi-temp Aluminum voice coil wound on black anodized voice coil former
$409.99
-
DC Audio DC Audio Level 3 15" Dual-4-Ohm 1000W RMS / 2000W Peak Car Audio Subwoofer/Sub
The level 3 sub is the ultimate daily driver sub. It puts out the low lows with lots of output designed for sealed or ported enclosures. The Level 3 sub is a triple stacked FEA optimized motor wrapped in a magnet boot, chrome top plate and T yoke. The deep gap offers more X-max for a total of 22.5mm. This sub also comes with dual upgraded progressive spiders, cone, surround, 3" voice coil, cast basket, push terminals, and upgraded sewn down lead wire. We give the Level 3 a power rating of 1000w RMS/2000w peak. Sub Size 10" 12" 15" 18" Mounting Depth 6.25" 6.75" 8" 9.5" Mounting Hole Diameter 9.35" 11" 14" 16.75" Outside Driver Diameter 11" 12.5" 15.7" 18.5" Motor Width 7" 7" 7" 7" Weight 20lbs 20.5lbs 21.5lbs 22lbs VC Diameter 3" 3" 3" 3" Displacement .15³ ft .16³ ft .18³ ft .22³ ft Magnet Weight 18lbs 18lbs 18lbs 18lbs Power Handling RMS/Peak 1000 / 2000 1000 / 2000 1000 / 2000 1000 / 2000 Impedance (Ohm) D1/D2/D4 D1/D2/D4 D1/D2/D4 D1/D2/D4 Sd 324cm² 481cm² 823cm² 1217cm² Vas 13.16 liters 28.99 liters 84.88 liters 185.6 liters Cms 0.09 mm/N 0.09 mm/N 0.09 mm/N 0.09 mm/N Mms 190 g 225 g 295 g 305 g Fs 38.5 35.4 30.9 30.4 BL 17.2 N/A 17.2 N/A 17.2 N/A 17.2 N/A Re 3.6 Ohm 3.6 Ohm 3.6 Ohm 3.6 Ohm Le 3.5 mH 3.5 mH 3.5 mH 3.5 mH Qms 7.66 8.33 8.18 8.32 Qes 0.567 0.617 0.706 0.718 Qts 0.528 0.574 0.65 0.661 Xmax 23 mm 23 mm 23 mm 23 mm Ref SPL @ 1 watt 83.1 dB (86.6@2.83V) 85 dB (88.5@2.83V) 87.3 dB (90.8@2.83V) 90.4 dB (93.9@2.83V) Suggested Sealed .65³ ft 1³ ft 2³ ft 4³ ft Suggested Ported 1.0³ ft 1.25³ ft 3.0³ ft 5.5³ ft Key Features • Extremely rigid non-pressed paper cone assembly • Multilayered polymer foam surround • Polypropylene dust cover with DC logo • Dual 8” OD semi cup progressive roll spider • Extra heavy duty interweaved tinsel lead wire sewn to spider • Cast aluminum black frame • FEA analyzed and optimized motor assembly – Fully CNC machined • Rubber mounting gasket • Chrome spring loaded push terminals • Dual 4 ohm 3” Hi-temp Aluminum voice coil wound on black anodized voice coil former
$329.99
-
DC Audio DC Audio A3 90.4K 520 Watt 4-Channel Car Audio Amplifier/Amp 90x4 130x4 250x2
The 90.4 Competition series amplifer is a 90 watts per channel @ 4 ohms or 130 watts per channel @ 2 ohms. This amp has a fully active crossover and lots of clean power for the SQ minded builds. Its also fits installs where you may want to amplify your front stage and bridge the rear 2 channels to your sub stage and have a bass knob to control it. Versatility is what this amp is all about. Key Features • Variable high pass filter • Variable Band pass filter • 8awg Speaker Connections • 4awg inputs • Input mode Switch • Dual power Transformers • Double Sided Printed Circuit Board • Class A/B • Fully Active Crossover Features Voltage 90.4 Output Power (RMS) 4 ohm 14.4V 90Wx4 2 ohm 130Wx4 1 ohm n/a 4 ohm mono 14.4V 250Wx2 1 ohm 18V n/a Input Sensitivity 6V~0.2V Frequency Response Hz 20Hz~20KHz 12dB / Octave Crossover CH1/2 Subsonic Filter : 10Hz ~ 100Hz Crossover : 50Hz(500Hz) ~ 5ooHz(5KHZ ) Multiply : x1, x10 Crossover Selector Switch : HPF / FULL / LP-BP Bass Boost : 0~18dB CH3/4 Subsonic Filter : 10Hz ~ 100Hz Crossover : 50Hz(500Hz) ~ 5ooHz(5KHZ ) Multiply : x1, x10 Crossover Selector Switch : HPF / FULL / LP-BP Bass Boost : 0~18dB Remote Control Frequency Response Hz 20-20Khs Signal to Noise Ratio dB 105 Damping Factor 200< THD @ 4ohms Less than 0.1% Fuse Rating On Board Yes 80 Amps Indicator Power Yes Protection Yes Speaker & Power terminal Mold Type Yes Power Gauge 4Ga Heatsink Length inch/mm 14.00"/350mm Heatsink Width inch/mm 9.38"/66mm Heatsink Height inch/mm 2.35"/59.6mm Key Features • Variable high pass filter • Variable Band pass filter • 8awg Speaker Connections • 4awg inputs • 4awg inputs • Input mode Switch • Dual power Transformers • Double Sided Printed Circuit Board • Class A/B • Fully Active Crossover
$621.50 $314.99
-
DC Audio DC Audio CS-1100X1 1100 Watt Mono Block Car Audio Class D Amplifier/Amp+Bass Knob
Amplifier Description The DC-CS 1000.1 is a compact series amplifier capable of making 1,100 watts. Its High power mono block. It has 4awg inputs and onboard clipping lights. It also comes with a bass knob and a clipping indicator. Designed to make more power in less space. Output Power (RMS) 4 ohm 500Wx1 @ 14.4 Volts 2 ohm 800Wx1 @ 14.4 Volts 1 ohm mono 1100x1 @ 14.4 Volts 1 ohm mono 1400x1 @ 16.0 Volts Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Wired Bass Knob remote control W/ Clip light • RCA Pass Thru • Onboard clip light AMP SPECS: DC Amp Model: CS 1100x1 Input Sensitivity 6V~0.2V Frequency Response 10Hz~250Hz 24dB / Octave Crossover YES Low Pass 35Hz ~ 250Hz Subsonic Filter 10Hz-50hz Bass Boost @45hz NO Phase Shift NO Remote Control Yes Clip Indicator Yes Signal to Noise Ratio dB92 Damping Factor 150< THD @ 4ohms Less than 0.1% Fuse Rating External 100 amp LED Status Lights Power/Protect/Clip Master/Slave NO Heatsink Length 8.27"/210mm Heatsink Width 4.72"/120mm Heatsink Height 1.96"/50.0mm
$349.99
