Car Audio
-
Sundown Audio Sundown Audio X-Series v.3 15" Subwoofer
2500 Watts RMS / 5000 Watts Peak Dual 1 or 2 ohm voice coil Made for extremely deep bass Triple-stacked magnet 3” voice coil Hyper-extended pole Built to order Designed with an extended pole piece and an incredible four inches of peak-to-peak excursion, the X v.3 is engineered for ultra-deep bass and high power handling. Engineered to set a new standard in the low-frequency/small-ported-box subwoofer category, the X Series can also work in up to a 50% larger enclosure if you desire even more low-end extension. The X v.3 series differentiates itself with its incredibly linear suspension, ensuring the lowest level of bass extension in a small enclosure while maintaining extremely low levels of distortion. Notably, the v.3 series features a much larger motor structure (220mm vs. 190mm on the V.1 series), improved motor ventilation, and an all-new Mega-Roll v.2 surround, providing a more linear and rugged update to the world-famous Mega-Roll v.1 surround design. Specifications T/S SPECS X V.3 15″ D1 X V.3 15″ D2 RE (Ohms) 1.4 3.2 FS (Hz) 31.418 31.423 VAS (L) 45.907 45.924 Qes 0.486 0.561 Qms 2.562 2.801 Qts 0.409 0.468 Le (mH) BL (NA) 15.518 21.831 Mms (Grams) 423.721 423.436 Cms (uM/N) 60.563 60.585 Sens (dB @ 1w/1m) 86.5dB 85.9dB Xmax 30mm 30mm Enclosure Specifications X v.3 15 Sealed Enclosure N/A Ported Enclosure 4.25 cu ft Recommended Tuning 32hz Recommended Port Area 68 sq in Displacement 0.22 cu ft Depth 11.6" Outside Diam. 15.51" Cutout 13.83" Physical Dimensions Download Enclosure Designs .Zip File
$749.99
-
Sundown Audio SML-Series 12” Thin Subwoofer
600 Watts RMS/1200 Watts Peak Dual 2 or 4 ohm voice coils Black Aluminum 2.5” voice coil former for superior heat dissipation High temperature 4-layer copper voice coil wire Stitched-on “Mini-XL” tinsel leads to prevent fatigue and failure Vented pole-piece and multi-vented magnetic gap Dual-magnet design for smooth acoustic response Custom tooled cone shape for reduced mechanical noise over high excursion Bolt-through motor design to ensure maximum longevity and ruggedness Introducing the SML series: a revolutionary line of subwoofers by Sundown Audio. This series is an inch shallower than the SLD line, yet delivers nearly the same excursion, making it the ultimate choice for customers in search of an extremely shallow driver with deep bass. Specifically designed to fit under or behind your seat, the SML series excels in performance, especially within small enclosures.
$249.99
-
Kicker Kicker CXA1200.1T 1200W Monoblock Amplifier 46CXA1200.1T
Specifications Performance RMS Power Output (Watts x Channels) 600 x 1 Peak Power Output (Watts x Channels) 2400 x 1 Power at 2 Ohms (Watts x Channels) 1200 x 1 Bridged Power (Watts x Channels) N/A Minimum Impedance Bridged N/A Minimum Impedance Unbridged 1 Minimum Impedance 1 Best Frequency Response 25-200 Hz THD at Rated RMS Power 1% Signal to Noise Ratio 70 dB Input Voltage 14.4v Features Amplifier Class D Low-Pass Crossover Frequency 50-200 Hz Low-Pass Slope (dB/octave) 12 dB/octave High-Pass Crossover Frequency N/A High-Pass Slope (dB/octave) N/A Bass Boost 0-6 dB Bass Boost Frequency 40 Hz Fan Cooled No Fuse Rating 100 Speaker Level Inputs Yes Preamp Outputs 1 pair Width (inches) 12-5/8 Height (inches) 2-3/8 Depth (inches) 6-3/4 Parts Warranty 2 Years Labor Warranty 2 Years
$399.99
-
Sundown Audio Sundown Audio BT-1R Super Tweeter
100 Watts RMS Impedance: 4 or 8 Ohms Frequency range: 4kHz - 20kHz Sensitivity 100dB Sold individually Handling 100 watts and only 1.6 inches deep, the BT-R1 is the choice when you want to cut through bass like a hot knife through butter. With an incredible 100dB sensitivity and a wide frequency range, this super tweeter makes the most out of every watt you give it.Enclosure SpecificationsDownload
$49.99
-
Sundown Audio Sundown Audio LCS v.2 12" Subwoofer
• 500 Watts RMS / 1000 Watts Peak• Dual 4-ohm voice coils• Optimized for small, ported enclosures• Class-leading 14mm Xmax• Double-stacked magnet• Vented coil gap & pole for superior cooling• Extra thick stamped steel frame• High temp 4-layer copper voice coil• High-quality push terminals• Stitched-on flat tinsel leads• Extremely low resonant frequency (Fs)Find the ideal balance of power, deep bass, and affordability with Sundown LCS subs. Sundown LCS woofers are known for their impressive bass response and high dependability. Typical entry-level woofers are limited in terms of excursion, mechanical ruggedness, and thermal performance. The v.2 update added an all-new, custom-tooled frame, push terminals, a rubber mounting gasket, and upgraded tinsel leads.
$174.99
-
Sundown Audio Sundown Audio SALT-4 Class D Amplifier
8,000 x 1 @ 2 ohms RMS (when linked) 4,000 x 1 @ 1 ohms RMS mono 2,000 x 1 @ 2 ohms RMS mono 1,000 x 1 @ 4 ohms RMS mono 24dB variable subsonic filter: 10HZ - 50HZ 24dB variable low pass filter: 35HZ - 250HZ Variable bass boost @ 45Hz 0-9dB Phase shift control 0-180 degrees Power, clipping & protection indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Included wired remote control displays voltage, temperature, and clipping Producing optimum power at realistic voltages (the 12s, rather than needing 14+ volts), the SALT – Sundown Audio Low-Voltage Technology – is Sundown’s answer! SALT amplifiers represent the pinnacle of Korean Class-D amplifier technology. Whether you are a world-class SPL competitor or simply want to bang harder than absolutely anyone else, the SALT series will be right at home in your system.
$1,499.99
-
Sundown Audio Sundown Audio SA-6.5CX 6.5" Coaxial Speakers
120 watts RMS Silk dome tweeter Hybrid fiber cone Adjustable crossover - midrange and tweeter Cast aluminum frame Magnet ID shorting ring (midrange) Machined aluminum tweeter housing High-compliance rubber surround 2.75" DEPTH Sundown’s premiere sound quality separates, the SA-6.5CS is a marvel of design and top-tier components. The midrange features a high-quality cast aluminum basket, housing a cone with a carefully selected blend of paper and wool fibers. This design dampens any unwanted resonances for an incredibly smooth, detailed response. The surround is a high-compliance rubber, engineered to tame edge resonances within the cone. An FEA-optimized motor was designed in-house, and features a full 6mm one-way linear excursion - thanks to a carefully designed motor and extended pole piece. To increase thermal performance, the SA midrange features a vented magnetic gap and vented voice coil collar. The SA series silk dome tweeter matches the smooth sound of the midrange. A result of extensive testing, Sundown optimized the tweeter’s gap, dome material, lens, and chamber damping material. The results speak for themselves. The separates feature a 12 dB network centered at 3800 Hz, with high quality air core inductors and Mylar capacitors. Change the midrange low pass filter to your acoustic tastes from a 12dB, to 6dB, to a bypassed slope. The tweeter's response is also customizable, ranging from 0, to -3, to -6 dB levels. The SA separates were engineered for one, simple goal: to let you completely immerse yourself in the music. At any volume. For as long as you want.
$199.99
-
Sundown Audio SIA-1250D Full-Range Mono Amplifier
1,250 x 1 @ 1 ohm RMS 1,250 x 1 @ 2 ohms RMS 800 x 1 @ 4 ohms RMS Variable 12dB low pass filter: 40Hz-20kHz Variable 12dB high pass filter: 10Hz-1kHz Variable 12dB Bass Boost @ 50Hz Power, protection & clipping indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Advanced 3-speed fan design Subsonic filter Intelligent full bridge design Wired remote control with clipping indicator included Delivering the same power at 1 or 2 ohms, Sundown SIA Smart amplifiers are built with power and stability at their core. These full-bridge amplifiers feature a heavy heatsink for outstanding thermal management, while the three-speed Smart Cooling fan and advanced power supply design protects the amplifier from overheating and distorted output.
$299.99
-
Sundown Audio Sundown Audio SD-Series v.4 12" Neo Subwoofer
RMS 600 watts Dual 2 or 4 ohm voice coils Optimized for small, sealed enclosures Lightweight Neodymium motor Computer-optimized foam “w” surround Two-inch 8-layer copper voice coil Large aluminum Faraday ring for smooth acoustic response Patented high strength cast aluminum frame Low distortion motor construction High-temperature voice coil wire Spring-loaded terminals Stitched-on tinsel lead wires The SD-4 series truly is a world-class sound quality woofer with low mounting depth, small box requirements, yet extraordinarily high power handling. It's the ideal choice for anyone seeking a high-quality, low-mounting-depth subwoofer that performs hammers in small enclosures. With enhanced mechanical durability and superb sound quality, you get the perfect marriage of form and function.
$329.99
-
Sundown Audio Sundown Audio LCS v.2 10" Subwoofer
• 500 Watts RMS / 1000 Watts Peak• Dual 4-ohm voice coils• Optimized for small, ported enclosures• Class-leading 14mm Xmax• Double-stacked magnet• Vented coil gap & pole for superior cooling• Extra thick stamped steel frame• High temp 4-layer copper voice coil• High-quality push terminals• Stitched-on flat tinsel leads• Extremely low resonant frequency (Fs)Find the ideal balance of power, deep bass, and affordability with Sundown LCS subs. Sundown LCS woofers are known for their impressive bass response and high dependability. Typical entry-level woofers are limited in terms of excursion, mechanical ruggedness, and thermal performance. The v.2 update added an all-new, custom-tooled frame, push terminals, a rubber mounting gasket, and upgraded tinsel leads.
$149.99
-
Sundown Audio Sundown Audio SAEv4-100.4 4-Channel Amplifier
250 x 2 @ 4 ohms RMS (Bridged) 125 x 4 @ 2 ohm RMS 100 x 4 @ 4 ohms RMS Hi-fidelity Class A/B design Variable 12dB low & high pass filters: 40Hz-5kHz Power and protection indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry The SAEv4 is engineered with high-fidelity Class A/B multi-channel architecture, providing an ideal balance between performance and affordability. Leveraging the latest half-bridge technology, these amplifiers deliver clean, powerful audio signals in a compact form factor. Featuring an all-new chassis and heatsink design with 33% more aluminum, this SAEv4 keeps your system cool even during intense listening sessions. The amp is packed with a variable subsonic, high pass and low pass filters, plus a 4-way protection circuit (thermal, voltage, speaker short, and DC offset). With an input sensitivity of 6V max and RMS power output of 125W x 4 at 2 ohms and 100W x 4 at 4 ohms, the SAEv4-100.4 is designed to drive your car audio system with precision and clarity. The variable crossover slope (LPF/HPF) and a high signal-to-noise ratio of 92dB further enhance audio quality, with an exceptionally low noise floor.
$349.99
-
Sundown Audio M-Series M12 2000W Subwoofer
2000 Watts RMS / 4000 Watts Peak Available in Dual 1 and Dual 2 Ohm Configurations Mega Roll Surround and Frame Etched All Black Backplate Quad Stack Magnet Structure The Sundown M-Series is an all-new "entry-level" subwoofer in our Mega series - all Mega series subwoofers (10,12,15,18) feature our custom tooled and patented frames (US Patent Numbers D691596, D691597, D691598, and D741841) and our Mega-Roll surround.When we say "entry-level" this is only by comparison to its big brothers in our own Mega line - X,Z,NS series and higher. The M series was built for intense bass with stellar low-frequency performance at industry-leading levels of low-distortion. It does this while looking amazing - with a new laser-etched back-plate design and special M-series magnet boot design.For the M-series we mate out Mega series frames to a quad stacked 200mm (7.87”) diameter motor structure with a total magnet stack height of 88mm (3.46”) featuring a hyper-extended pole and extreme clearances (allowing 59.5mm to mechanical bottom effectively making it bottomless - this is 4.68" peak-to-peak). At Sundown we always do things to the extreme so even our "entry" level M-series features a full 20mm thick top-plate to finish the efficient magnetic circuit. We did all of this while still optimizing the cost to offer the absolute best-value to our customers.This motor drives a 3" diameter 4-Layer Round Wire Aluminum Voice Coil wound on a thick aluminum former to incredible levels of excursion. The new coil in the M-series was developed for both the M and X v.4 series and features a very special winding (invented by Sundown for the X-8 series originally) that allows the best winding packing density in the gap for both the D1 and D2 options. This coil is so massive that it allows even our M-series to achieve a full 35mm one-way linear excursion. We are truly setting a new industry standard with the M-series.Based on Sundown's years of experience we've included our highly efficient high-stroke coil ventilation system developed for the X and Z series originally. The M-series features a high-velocity pole vent, a heavily vented magnetic gap through the back-plate, and our proprietary high-velocity cast-aluminum frame-base venting system.The M-series was designed from the ground-up to become the new standard in the low-frequency / small, ported box subwoofer category in this price range. Never before have we been able to offer such an incredible value in the Mega series. They will work in the same enclosure as our other Mega platform subwoofers, but the M-series also opens up the possibility for sealed and IB applications. This is something that was not well suited to any other previous Mega platform subwoofer.The M-series is really a different kind of woofer due to its incredibly linear suspension. They are designed for the LOWEST level of bass extension possible in a small enclosure while maintaining extremely low levels of distortion. This is all thanks to the Sundown Mega-Roll surround & proprietary Sundown PG linear suspension (fully computer optimized). As with most subwoofers from Sundown the M-series features a magnet inner-diameter aluminum shorting ring for superior inductive distortion performance as well.We are quite certain that the M-series will go down in car audio history as one of the best low-distortion subwoofers per-dollar of its time.
$599.99
-
Sundown Audio Sundown Audio ET-1R Super Tweeter
Power handling: 100 Watts RMS Impedance: 4 or 8 ohms Frequency range: 4kHz - 20kHz Sensitivity: 105dB Sold Individually Handling 100 watts and only 1.67 inches deep, the BT-R1 is the choice when you want to cut through bass like a hot knife through butter. We incorporated our highest sensitivity (105dB) and biggest diaphragm (33.5mm) into this super tweeter to make the most out of every watt you give it. Measurements Download
$44.99
-
Clearance Deals Jensen JS69T 6x9" 350W Coaxial Speakers
Specifications Features: 6″ x 9″ TRIAX design Injection-molded polypropylene woofer cone Nitrile butadiene rubber surround 58mm Mylar® balanced dome midrange 20mm piezo tweeter Grilles included Magnet weight: 26.8 oz Specifications: Sensitivity: 89dB Frequency response: 50Hz – 20kHz Nominal impedance: 4 Ohm RMS power: 75 Watts Peak power: 375 Watts Dimensions: Top-mount depth: 3.11″ Bottom-mount depth: 3.56″ Cut-out diameter: 5.59″ x 8.70″ Mounting height: 0.87″
$89.99 $54.99
-
Sundown Audio SA-Series v.3 12" Subwoofer
1500 Watts RMS / 3000 Watts Peak Dual 2 or 4 ohm voice coils Vented magnetic gap & solid pole piece with vent channels Aluminum 2.75” voice coil former for superior heat dissipation Innovative high velocity, cast aluminum vented frame spacer ring Magnet ID faraday ring & pole cap faraday ring for smooth acoustic response High-temperature copper voice coil wire Spring-loaded terminals Stitched-on double “XL” tinsel leads This SA-10/12 v.3 series is the next generation upgrade to the v.2 series. We stuck with the 2.75” coil diameter and added another 5mm of length for additional linear x-max (22mm now). We are able to perfectly balance the mass, motor force, and suspension stiffness for the intended power level. Compared to the v.2 the v.3 features taller cones and wider spiders to enhanced linearity and coil stability to the next level. We also utilized full 3D FEA to further optimize the spider packs for this generation. The motor also features a large magnet shorting ring (faraday ring) & pole cap faraday ring to reduce distortion and deliver smoother response across the entire acoustic spectrum. With the v.3 upgrade we integrated a completely "locked-in" faraday ring that is physically held in place by the T-Yoke. The motor & coil setup is mated to an extremely robust multi-layer spider with fully tied-on & doubled-up “XL” tinsel leads. A competition-grade paper cone, strong foam surround, and custom-tooled aluminum frame (same frame as the bigger brother U v.2 series) are used to complete this masterpiece. On top of the ~22mm of one-way linear excursion we have an x-mech limit of 41mm one-way before coil bottom making it nearly "bottomless." The new motor was designed as a "little brother" to the U v.2 series so you will also note the updated venting system with a solid pole piece from the back and channeled pole on the inside. Enclosure Designs .Zip File
$429.99
-
Deaf Bonce Deaf Bonce Apocalypse DB-3015R D1/D2 15" 2800W Subwoofer
Specifications Model DB-3015R D1 / DB-3015R D2 Type Subwoofer Size 15 inch Voice coil size 3.00 inch Cone Paper Magnet Ferrite Voice coil wire None Surround Foam RMS Power 2800 W MAX Power 5600 W Frame Alu Impedance 1+1 / 2+2 Ohm SPL 88.00 / 88.30 dB Fs 32.00 / 32.50 Hz Qts 0.45 / 0.47 BL 23.00 / 26.10 Vas 68.00 / 69.70 L Xmeh 38.00 / 38.00 mm Xmax 19.00 / 19.00 mm Mounting depth 10.18 inch (258.5 mm) Cut-out dimension 13.98 inch (355.0 mm) Gross weight 68.34 lb (31.00 kg)
$649.90
-
Sundown Audio Sundown Audio LCMR-6.5 100 Watt Pro Audio Midrange Speaker
Features Sold Individually Power Handling: 100 Watts RMS Impedance: 4/8 Ohm Frequency Range: 120Hz - 6kHz Phase Plug Outer Diameter: 6.51" Cutout Diameter: 5.82" Mounting Depth: 3.50" VC Diamete: 1.51" Magnet Material: Ferrite Effective surface area,Sd: 12.469*
$59.99
-
Sundown Audio Sundown Audio U-Series v.1 10" Subwoofer
The Sundown U Series is our premier “standard suspension” woofer series. It is the most direct replacement for the world famous Z v.3 woofer line which we produced from 2011 to 2016 before launching the “new platform” Z v.4 series. Due to numerous advancements in our design process the U Series is able to deliver performance on-par with the Z v.3 series but at a much lower cost. We start with a double-stacked / 8.66” wide Y35 grade ferrite magnet system coupled to a one-piece, bumped T-Yoke and a 0.6” thick top-plate. Just as with the Z v.3 before it and our other high-end subwoofers we also add a very thick (5mm thickness) aluminum shorting ring inside the magnets to reduce static inductance and level out inductance over stroke. The U series motor also features a 0.6” long pole-extension to keep the coil under control at high levels of excursion. The voice coil is a 2.36” long / 3” diameter 4-layer aluminum winding / aluminum former unit – which is the same coil we use in our X v.2 series and, thus, the U series has the same 1500-watt RMS ratings. The coil temperature is kept in check by a heavily smoothed / high-velocity pole-vent and a series of ten direct air-gap vents in the back plate. The U series also features newly tooled cast aluminum vent rings in between the frame and top plate to effectively exchange air at a high velocity over the voice coil beneath the spider landing. The U series features an all-new cast aluminum frame series to the Sundown line which allows for taller cones than the older frames used on the Z v.3 series. The taller cones provide enhanced coil stability and increased mechanical excursion capability. We also tooled matching cast-aluminum surround clamps for the U series to ensure durability in the most demanding situations. The surrounds and cone bodies have been fully custom tooled especially for the U series and are stronger / support more excursion than the Z v.3 series cones and surrounds. The new cone bodies also feature an indentation for the same wide-flange, ultra-strong dust caps as our new platform subwoofers. If you are looking for a woofer that sounds similar to the SA series but handles significantly more power… the U series is exactly what you need. It has been designed to live up to the reputation earned by our Z v.3 series both in terms of every-day music enjoyment and SPL competition. Black Aluminum 3” voice coil former for superior heat dissipation High Temperature Round-Wire CCAW voice coil with high-temp black adhesive Double stitched surround Heavy duty cast basket Spring loaded terminals accept up to 8 gauge Stitched-on double-XL tinsel leads Rear vented pole piece Rear drilled gap-venting Innovative high-velocity cast aluminum vented frame spacer ring Magnet ID shorting ring Top-Plate Cooling Channels Cast Aluminum surround bolt-on rings Optimized for small ported or bandpass enclosures
$529.99 $339.99
-
Sundown Audio Sundown Audio SA-6.5CS v.3 6.5" 6-1/2 Component Car Audio Speakers+Tweeters
When Sundown set out to design the "SA" series component they knew it had to be something special; something to uphold the reputation of the SA series subwoofer line. But at the same time the price had to remain reasonable; something that almost anyone can afford.The SA component set starts out with its custom designed midrange driver. The mid features a high quality cast aluminum basket as its starting point; where many speakers in this category go with cheaper stamped steel frames. The cone is a carefully selected blend of paper and wool fibers designed to damp any unwanted resonances. The dust cap is a soft poly whose size, shape, and material were all chosen to create the least amount of breakup and distortion as possible. The surround is a very compliant rubber that helps to tame any remaining edge resonances within the cone. With any midrange the cone, surround, and dust cap are CRITICAL to the sound. When designing the SA set we had no concern for fancy cosmetics or other "audio jewelry" The motor was FEA optimized in-house to increase linear excursion and features a full 6mm one-way linear excursion thanks to a carefully designed motor and extended pole piece. We also thoroughly considered thermal performance in the design with the SA mid featuring a vented magnetic gap and a vented voice coil collar. The 60-watt per side power rating on the SA mid is derived from a full 8-hour test on pink noise (full bandwidth down to 20 Hz) -- so when crossed over on the bottom-end this figure ends up being VERY conservative. Most customers use 100+ watt RMS amplifiers on the SA sets. The SA series tweeter had to match the smooth sound of the midrange so we went with a silk dome. We tested numerous versions, tweaked the gap, dome material, tested various lenses, various chamber damping materials, so on and so forth until arriving at the final design. As the response graph is proof of the result is an incredibly smooth sounding tweeter. Don't be fooled by the simple housing -- as we are all taught not to judge a book by its cover and you will find this tweeter performs as good or better than many fancier looking counterparts. We stuck with the Sundown mentality of not spending money where it doesn't increase performance. The crossover is also relatively simple looking at first glance but it does the job perfectly. It is a 12 dB network centered at 3800 Hz with high quality air core inductors and Mylar capacitors. It also features the ability to change the LPF on the mid from a 12dB, to 6dB, to a bypassed slope as well as to adjust the tweeter from 0, to -3, to -6 dB levels. We are confident that anyone who is after a smooth sounding set will be incredibly pleased with the SA component line. Reviews have been overwhelmingly positive on them from all over the globe. If you are a metal or hard dome tweeter fan it may not be your set but we will develop a "sharper" sounding set down the line! Features & Specifications 6.5" Component Speakers System 125 Watts / Side Silk Dome Tweeter Machine Aluminum Tweeter Housing Case Aluminum Frame Magnet ID Shorting Ring (Midrange) Carbon Fiber Cone Rubber Surround 24dB/Octave Crossover Adjustable Tweeter Level (-3, 0, +3) Mounting Depth: 2.87" Cutout: 5.63"
$399.99
-
Sundown Audio SML-Series 10” Thin Subwoofer
600 Watts RMS/1200 Watts Peak Dual 2 or 4 ohm voice coils Black Aluminum 2.5” voice coil former for superior heat dissipation High temperature 4-layer copper voice coil wire Stitched-on “Mini-XL” tinsel Leads to prevent fatigue and failure Vented pole-piece and vented magnetic gap Dual-magnet design for smooth acoustic response Custom tooled cone shape for reduced mechanical noise over high excursion Bolt-through motor design to ensure maximum longevity and ruggedness The SML series is a revolutionary line of subwoofers offered by Sundown Audio. An inch shallower than our SLD series, it delivers nearly the excursion, making it an ideal choice for customers seeking an extremely shallow driver with deep bass. Designed to fit under or behind your seat, the SML series performs exceptionally well in small enclosures.
$239.99
-
Sundown Audio Sundown Audio SFB-200.4 4-Channel Amplifier
200 x 4 @ 1 ohm RMS 125 x 4 @ 2 ohms RMS 75 x 4 @ 4 ohms RMS 4-channel full-range amplifier Variable 12dB low pass filter: 50Hz – 6kHz Variable 12dB high pass filter: 15Hz – 6kHz Variable 12dB Bass Boost @ 50Hz Power, protection & clipping indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Optional wired remote control with clipping indicator Introducing the Sundown Full Bridge line of amplifiers! The “Brazilian Style” SFB packs a powerful punch in a compact size, stable down to 1 ohm per channel. Use the SFB to wire several speakers together on every channel - an ideal amp for a PA mid/high speaker array, a large marine system, or your favorite set of separates. If you are looking for raw power on a budget – look no further!
$289.99
-
Sundown Audio M-Series M15 2000W Subwoofer
2000 Watts RMS / 4000 Watts Peak Available in Dual 1 and Dual 2 Ohm Configurations Mega Roll Surround and Frame Etched All Black Backplate Quad Stack Magnet Structure The Sundown M-Series is an all-new "entry-level" subwoofer in our Mega series - all Mega series subwoofers (10,12,15,18) feature our custom tooled and patented frames (US Patent Numbers D691596, D691597, D691598, and D741841) and our Mega-Roll surround.When we say "entry-level" this is only by comparison to its big brothers in our own Mega line - X,Z,NS series and higher. The M series was built for intense bass with stellar low-frequency performance at industry-leading levels of low-distortion. It does this while looking amazing - with a new laser-etched back-plate design and special M-series magnet boot design.For the M-series we mate out Mega series frames to a quad stacked 200mm (7.87”) diameter motor structure with a total magnet stack height of 88mm (3.46”) featuring a hyper-extended pole and extreme clearances (allowing 59.5mm to mechanical bottom effectively making it bottomless - this is 4.68" peak-to-peak). At Sundown we always do things to the extreme so even our "entry" level M-series features a full 20mm thick top-plate to finish the efficient magnetic circuit. We did all of this while still optimizing the cost to offer the absolute best-value to our customers.This motor drives a 3" diameter 4-Layer Round Wire Aluminum Voice Coil wound on a thick aluminum former to incredible levels of excursion. The new coil in the M-series was developed for both the M and X v.4 series and features a very special winding (invented by Sundown for the X-8 series originally) that allows the best winding packing density in the gap for both the D1 and D2 options. This coil is so massive that it allows even our M-series to achieve a full 35mm one-way linear excursion. We are truly setting a new industry standard with the M-series.Based on Sundown's years of experience we've included our highly efficient high-stroke coil ventilation system developed for the X and Z series originally. The M-series features a high-velocity pole vent, a heavily vented magnetic gap through the back-plate, and our proprietary high-velocity cast-aluminum frame-base venting system.The M-series was designed from the ground-up to become the new standard in the low-frequency / small, ported box subwoofer category in this price range. Never before have we been able to offer such an incredible value in the Mega series. They will work in the same enclosure as our other Mega platform subwoofers, but the M-series also opens up the possibility for sealed and IB applications. This is something that was not well suited to any other previous Mega platform subwoofer.The M-series is really a different kind of woofer due to its incredibly linear suspension. They are designed for the LOWEST level of bass extension possible in a small enclosure while maintaining extremely low levels of distortion. This is all thanks to the Sundown Mega-Roll surround & proprietary Sundown PG linear suspension (fully computer optimized). As with most subwoofers from Sundown the M-series features a magnet inner-diameter aluminum shorting ring for superior inductive distortion performance as well.We are quite certain that the M-series will go down in car audio history as one of the best low-distortion subwoofers per-dollar of its time.
$659.99
-
Sundown Audio U-Series v.2 10" Subwoofer
2000 Watts RMS / 4000 Watts Peak Dual 2 or 4 ohm voice coils Optimized for small ported enclosures Aluminum 3” voice coil former for superior heat dissipation High-temperature copper voice coil Double stitched surround Heavy-duty cast basket Spring-loaded terminals accept up to 8-gauge wire Stitched-on heavy-duty tinsel leads Solid pole with vent channels and aluminum shorting ring cap Rear gap-venting Top-Plate Cooling Channels Designed to be at home in the competition lanes or playing your favorite music, the U Series is the premier “standard suspension” woofer in the Sundown lineup. A double-stacked 9.4-inch wide ferrite magnet system is coupled to a thick top plate. A thick set of shorting rings are used inside the magnets and on the pole cap, smoothing out frequency response while doubling as a heat sink and airflow guide. A custom, substantially thicker aluminum frame was designed specifically for the U Series, equipped with heat dissipation ribs. The U v.2 motor also features an extended pole piece to keep the coil under perfect control under high stress. The coil temperature is kept in check via a high-velocity solid pole / machined pole channels arrangement and a series of 16 direct air-gap vents in the back plate. Dimensions
$529.99
-
Sundown Audio Sundown Audio SALT-200.4 4-Channel Amplifier
700 x 2 @ 4 ohms RMS 325 x 4 @ 2 ohms RMS 200 x 4 @ 4 ohms RMS bridged 4-channel full-range amplifier: 10Hz – 25 kHz Variable 12dB high & low pass filters: 50HZ - 500HZ Variable 12dB subsonic filter: 10HZ - 500HZ X1/X10 crossover multiplier Power, clipping & protection indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Optional wired remote control displays voltage, temperature, and clipping display Producing optimum power at realistic voltages (the 12s, rather than needing 14+ volts), the SALT – Sundown Audio Low-Voltage Technology – is Sundown’s answer! SALT amplifiers represent the pinnacle of Korean Class-D amplifier technology. Whether you are a world-class SPL competitor or a hardcore sound quality fan, the SALT series will be right at home in your system.
$799.99
