Car Audio
-
Sundown Audio SA-Series v.2 12" Subwoofer
1250 Watts RMS / 2500 Watts Peak Dual 2 or 4 ohm voice coils Vented magnetic gap & pole piece Aluminum 2.75” voice coil former for superior heat dissipation Innovative high velocity, cast aluminum vented frame spacer ring Magnet ID faraday ring for smooth acoustic response High-temperature copper voice coil wire Spring-loaded terminals Stitched-on double “XL” tinsel leads This SA-10/12/15 v.2 series is a top-down upgrade from the original SA series. The 2.75” coil punches way above its weight, outperforming many 3” coils without the adding weight & with the added advantage of a wider spider. We are able to perfectly balance the mass, motor force, and suspension stiffness for the intended power level.The motor also features a large magnet shorting ring (faraday ring) to reduce distortion and deliver smoother response across the entire acoustic spectrum. The motor & coil setup is mated to an extremely robust multi-layer spider with fully tied-on & doubled-up “XL” tinsel leads. A competition-grade paper cone, strong foam surround, and cast aluminum frame are used to complete this masterpiece. On top of the ~19mm of one-way linear excursion we have an x-mech limit of 37mm one-way before coil bottom making it nearly "bottomless."The 18" model features a larger diameter motor to drive the higher mass. Enclosure Designs .Zip File
$409.99
-
Sundown Audio Sundown Audio SDDN 18" Limited Edition Competition Subwoofer
3,500 watts RMS Available in 10 through 18-inch versions Dual 1 ohm coils Mega V2 Cone Aluminum 3.3” x 80mm coil Dual 8 AWG terminals with dual-layer tinsel leads Custom cross-cut pole piece with Neodymium cap for increased output and thermal control 5-layer spider 1,336 oz (83.5 lbs) magnet with integrated thermal ventilation Optimized for Ported & 6th order enclosures Carbon cone upgrade available Designed in-house by Sundown Founder Jacob Fuller, the 3,500-watt RMS SDDN is available in 10, 12, 15, and 18-inch models. Each unit boasts a massive 83-pound motor with integrated thermal ventilation, featuring a custom cross-cut pole piece with a Neodymium cap for increased output and thermal control. Sundown’s signature Mega V2 cone is paired with a five-layer spider, a 3.3” x 80mm aluminum voice coil (dual 1-ohm), and dual tinsel leads per eight-gauge terminal.
$1,499.99
-
Sundown Audio Sundown Audio ECX-6.5 6.5" 6-1/2 Pro Sound Coaxial Speakers
Features Sold Individually Power Handling: 50 Watts RMS Impedance: 4 ohms Frequency Range: 80Hz - 20kHz Sensitivity: 94dB
$59.99
-
Sundown Audio Sundown Audio SA-Series v.2 15" Subwoofer
1250 Watts RMS / 2500 Watts Peak Dual 2 or 4 ohm voice coils Vented magnetic gap & pole piece Aluminum 2.75” voice coil former for superior heat dissipation Innovative high velocity, cast aluminum vented frame spacer ring Magnet ID faraday ring for smooth acoustic response High-temperature copper voice coil wire Spring-loaded terminals Stitched-on double “XL” tinsel leads This SA-10/12/15 v.2 series is a top-down upgrade from the original SA series. The 2.75” coil punches way above its weight, outperforming many 3” coils without the adding weight & with the added advantage of a wider spider. We are able to perfectly balance the mass, motor force, and suspension stiffness for the intended power level.The motor also features a large magnet shorting ring (faraday ring) to reduce distortion and deliver smoother response across the entire acoustic spectrum. The motor & coil setup is mated to an extremely robust multi-layer spider with fully tied-on & doubled-up “XL” tinsel leads. A competition-grade paper cone, strong foam surround, and cast aluminum frame are used to complete this masterpiece. On top of the ~19mm of one-way linear excursion we have an x-mech limit of 37mm one-way before coil bottom making it nearly "bottomless."The 18" model features a larger diameter motor to drive the higher mass. Enclosure Designs .Zip File
$409.99
-
Sundown Audio SIA-5000D Full-Range Mono Amplifier
5,000 x 1 @ 1 ohm RMS 4,950 x 1 @ 2 ohms RM 3,400 x 1 @ 4 ohms RMS Variable 12dB low pass filter: 40Hz-20kHz Variable 12dB high pass filter: 10Hz-1kHz Variable 12dB Bass Boost @ 50Hz Power, protection & clipping indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Advanced 3-speed fan design Subsonic filter Intelligent full bridge design Wired remote control with clipping indicator included Delivering tremendous power at 1, 2, or 4 ohms, the Sundown SIA amps are built with power and stability at their core. These full-bridge amplifiers feature a heavy heatsink for outstanding thermal management, while the three-speed Smart Cooling fan and advanced power supply design protects the amplifier from overheating and distorted output. Made to bang all day long, by the world champions of bass!
$674.99
-
Sundown Audio Sundown Audio SALT-12 Competition Class D Amplifier
12,000 x 1 @ 1 ohms RMS mono 6,000 x 1 @ 2 ohms RMS mono 3,000 x 1 @ 4 ohms RMS mono Frequency Response : 10 Hz – 250 HZ 24dB variable subsonic filter: 10HZ - 50HZ 24dB variable low pass filter: 35HZ - 250HZ Variable bass boost @ 45Hz 0-9dB Phase shift control 0-180 degrees Power, clipping & protection indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Included wired remote control displays voltage, temperature, and clipping Sundown's biggest powerhouse, the SALT-12 delivers a mind-twisting 12k at 1 ohm. The amp features both a 24dB variable subsonic and low pass filter, along with a bass boost at 45Hz, letting you dial in your personal, perfect sound. The phase shift control makes it easy to precisely adjust the output. With onboard indicators for power, clipping, and protection you’ll have full control over your setup. Use the included wired remote control to see voltage, temperature, and clipping at a glance.Producing optimum power at realistic voltages (the 12s, rather than needing 14+ volts), the SALT – Sundown Audio Low-Voltage Technology – is Sundown’s answer! SALT amplifiers represent the pinnacle of Korean Class-D amplifier technology. Whether you are a world-class SPL competitor or simply want to bang harder than absolutely anyone else, the SALT series will be right at home in your system.
$4,499.99
-
Sundown Audio Sundown Audio SALT-500.4 4-Channel Amplifier
1,400 x 2 @ 4 ohms RMS 700 x 4 @ 2 ohms RMS 500 x 4 @ 4 ohms RMS 4-channel full-range amplifier: 10Hz – 25 kHz Variable 12dB subsonic filter: 10HZ - 500HZ Variable 12dB high & low pass filters: 50HZ - 500HZ X1/X10 crossover multiplier Power, clipping & protection indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Optional wired remote control displays voltage, temperature, and clipping display Producing optimum power at realistic voltages (the 12s, rather than needing 14+ volts), the SALT – Sundown Audio Low-Voltage Technology – is Sundown’s answer! SALT amplifiers represent the pinnacle of Korean Class-D amplifier technology. Whether you are a world-class SPL competitor or a hardcore sound quality fan, the SALT series will be your go-to choice to bring your speakers to life! It's got easy-to-use 12dB subsonic and high/low pass filters to customize your sound exactly as you like it. Plus, it has power, clipping, and protection indicators to keep everything running smoothly. The optional remote control lets you see voltage, temperature, and clipping with ease. With SALT amps you get all the control you’d ever need, incredible dynamics and the kind of power only Sundown can deliver!
$999.99
-
Sundown Audio Z-Series ZV6 12" 3250W Subwoofer Z v.6
The Z v.6 is the second step up in Sundown's "ultra-high excursion" subwoofer lineup after the X v.3 series and replaces the world-famous Z v.5 series. All models (10,12,15,18) feature our custom tooled and patented frames (US Patent Numbers D691596, D691597, D691598, and D741841).Sundown mates these new platform frames to a quad stacked 240mm (9.45”) diameter motor structure with a total magnet stack height of 100mm (3.94”) featuring a hyper-extended pole and extreme clearances (allowing over 4" p-p travel before mechanical bottom effectively making it bottomless). Compared to the X v.3 motor both the top & back plates are thicker allowing for even more magnetic strength and excursion potential. For the Z v.6 the top plate is another 5mm thicker than even the outgoing Z v.5 series!This motor drives a 3" diameter 8-Layer Flat Wire Aluminum Voice Coil wound on a thick aluminum former to incredible levels of excursion. The Z v.6 now uses the same voice coil as the NS v.5 series. The Z v.5 utilized a 4-layer voice coil – the change to an 8-layer was to answer our customers desire for higher motor force (more output) and it does just that!Based on Sundown's years of experience with the Z v.4 and Z v.5 series we've also improved the voice coil ventilation to be even more effective. The Z v.6 features a high-velocity pole vent, a heavily vented magnetic gap, and (all new for the v.6) machined channels in four places around the pole piece itself.The Z v.6 series was designed from the ground-up to become the new standard in the low-frequency / small ported box subwoofer category in this price range. They will work in the same small enclosures that are commonly used for for Sundown Audio's subwoofers, although, they can be used with enclosures up to about 50% larger than those if you desire even more low-end extension.The Z v.6 series is really a different kind of woofer due to its incredibly linear suspension. They are designed for the LOWEST level of bass extension possible in a small enclosure while maintaining extremely low levels of distortion. Features Power Handling:3250 Watts RMS / 6500 Watts Peak Xmax = 35mm one-way by 70% BL Heavily vented magnetic gap Spring Loaded Terminals Optimized high-velocity pole vent Innovative high-velocity cast-aluminum vented frame spacer ring Black aluminum 3 inch 8-layer voice coil Mega-Roll v.2 surround Custom tooled basket Large aluminum Faraday (shorting) Ring Stitched-On XL Tinsel Leads to prevent fatigue and failure Custom-tooled ultra-linear spider packs Enclosure Designs .Zip File
$979.99
-
Sundown Audio Sundown Audio SDDN 12" Limited Edition Competition Subwoofer
3,500 watts RMS Available in 10 through 18-inch versions Dual 1 ohm coils Mega V2 Cone Aluminum 3.3” x 80mm coil Dual 8 AWG terminals with dual-layer tinsel leads Custom cross-cut pole piece with Neodymium cap for increased output and thermal control 5-layer spider 1,336 oz (83.5 lbs) magnet with integrated thermal ventilation Optimized for Ported & 6th order enclosures Carbon cone upgrade available Designed in-house by Sundown Founder Jacob Fuller, the 3,500-watt RMS SDDN is available in 10, 12, 15, and 18-inch models. Each unit boasts a massive 83-pound motor with integrated thermal ventilation, featuring a custom cross-cut pole piece with a Neodymium cap for increased output and thermal control. Sundown’s signature Mega V2 cone is paired with a five-layer spider, a 3.3” x 80mm aluminum voice coil (dual 1-ohm), and dual tinsel leads per eight-gauge terminal.
$1,349.99
-
Sundown Audio Sundown Audio E-5.25CX 5.25" Coaxial Speakers
50W RMS Black polypropylene cone UV-resistant rubber surround High-performance titanium dome tweeter Rubber tweeter stalk ring for weather and dust resistance Black stamped steel basket with perimeter venting Sold as pairs Grilles included 2.5" Mounting depth Sundown’s constant innovation continues in the affordable E-Series coaxial speakers. Designed for audiophiles and enthusiasts alike, these speakers give you crisp highs, rich mids, and deep, impactful bass as only the kings of the SPL lanes can deliver.Using a titanium tweeter and tough polypropylene cone, the E-Series drivers use a damped titanium tweeter for smooth response, without the harshness of most metal drivers. An ultra smooth sounding polypropylene cone is mated to the cone with a rubber surround, helping to provide extremely linear excursion. A rubber sealing ring was added to the tweeter stalk, preventing dust and moisture from interfering with motor movement. The steel frame is custom tooled and vented for outstanding thermal control, so you can play it long and play it loud!
$99.99
-
Sundown Audio Sundown Audio X-Series v.3 10" Subwoofer
2500 Watts RMS / 5000 Watts Peak Dual 1 or 2 ohm voice coil Made for extremely deep bass Triple-stacked magnet 3” voice coil Hyper-extended pole Built to order Designed with an extended pole piece and an incredible four inches of peak-to-peak excursion, the X v.3 is engineered for ultra-deep bass and high power handling. Engineered to set a new standard in the low-frequency/small-ported-box subwoofer category, the X Series can also work in up to a 50% larger enclosure if you desire even more low-end extension.The X v.3 series differentiates itself with its incredibly linear suspension, ensuring the lowest level of bass extension in a small enclosure while maintaining extremely low levels of distortion. Notably, the v.3 series features a much larger motor structure (220mm vs. 190mm on the v.1 series), improved motor ventilation, and an all-new Mega-Roll v.2 surround, providing a more linear and rugged update to the world-famous Mega-Roll v.1 surround design.
$649.99
-
Sundown Audio Ampere Audio AA-2.75 Series 15"/18" Car Subwoofer Recone
1000W RMS DVC Premium Subwoofer ReconePlease note: Includes a Blank Dustcap Built for serious SPL setups and bass heads who demand more, the Ampere Audio AA-2.75 RVE Series car subwoofer delivers powerful, clean low-end with up to 1000W RMS of relentless output. As one of the most rugged car audio components on the market, this sub is available in both 15 inch car subwoofers and 18″ sizes, featuring dual 2Ω or 4Ω voice coils for flexible wiring. Its massive 2.75″ high-temp aluminum voice coil, stitched XL tinsel leads, and vented motor structure make it a go-to car audio solution for SPL competitors and high-output daily drivers. A cast aluminum frame ensures strength under pressure, while a large Faraday ring minimizes distortion during heavy bass drops. Whether you're upgrading your system or building a wall, the AA-2.75 is a high-performance car subwoofer designed to dominate. Push limits, hit harder, and feel every beat—this is next-level bass.
$134.99 - $149.99
-
Sundown Audio Compact Neo V3 18" Subwoofer
Neodymium motor creates Sundown's highest motor force - as strong as a 2,000 oz. ferrite motor! 3,500-watt recommended amplifier power Large shorting rings for extremely smooth response Megaroll technology for extremely linear cone travel and low-end extension Cross-cut pole for lowered distortion, improved thermal control, and higher efficiency Heavy-duty cast basket Spring-loaded terminals accept up to 4-gauge wire Stitched-on heavy-duty tinsel leads Solid pole with vent channels and aluminum shorting ring cap Top-plate cooling channels THREE OPTIONS AVAILABLE MUSIC All-around performance Patented Sundown frame Increased airflow for additional cooling Larger, highly linear spider Most Throw/X-Max MUSICAL SPL Higher musical output U-series frame Direct compression cooling Higher Efficiency SPL Extreme output (burp) U-series frame Direct compression cooling Custom cone, coil and progressive suspension configurations available. Standard 3,500-watt rating. RMS may change with custom configuration. Lightweight and incredibly powerful, the Compact Neo V.3 is the perfect combination of musicality and sheer, unrelenting motor force. Using Sundown's patented platform, the Compact features an extended pole piece with a thick shorting ring, plus a custom cross-cut pole piece with a Neodymium cap for increased output and thermal control. The solid, high-velocity pole piece uses CNC cross-cut channel cooling, a series of 16 direct air-gap vents in the back plate to keep the motor even cooler, and a vented top plate/gap.
$1,499.99 - $1,799.99
-
Sundown Audio Compact Neo V3 15" Subwoofer
Neodymium motor creates Sundown's highest motor force - as strong as a 2,000 oz. ferrite motor! 3,500-watt recommended amplifier power Large shorting rings for extremely smooth response Megaroll technology for extremely linear cone travel and low-end extension Cross-cut pole for lowered distortion, improved thermal control, and higher efficiency Heavy-duty cast basket Spring-loaded terminals accept up to 4-gauge wire Stitched-on heavy-duty tinsel leads Solid pole with vent channels and aluminum shorting ring cap Top-plate cooling channels THREE OPTIONS AVAILABLE MUSIC All-around performance Patented Sundown frame Increased airflow for additional cooling Larger, highly linear spider Most Throw/X-Max MUSICAL SPL Higher musical output U-series frame Direct compression cooling Higher Efficiency SPL Extreme output (burp) U-series frame Direct compression cooling Custom cone, coil and progressive suspension configurations available. Standard 3,500-watt rating. RMS may change with custom configuration. Lightweight and incredibly powerful, the Compact Neo V.3 is the perfect combination of musicality and sheer, unrelenting motor force. Using Sundown's patented platform, the Compact features an extended pole piece with a thick shorting ring, plus a custom cross-cut pole piece with a Neodymium cap for increased output and thermal control. The solid, high-velocity pole piece uses CNC cross-cut channel cooling, a series of 16 direct air-gap vents in the back plate to keep the motor even cooler, and a vented top plate/gap.
$1,499.99 - $1,799.99
-
Sundown Audio Compact Neo V3 12" Subwoofer
Neodymium motor creates Sundown's highest motor force - as strong as a 2,000 oz. ferrite motor! 3,500-watt recommended amplifier power Large shorting rings for extremely smooth response Megaroll technology for extremely linear cone travel and low-end extension Cross-cut pole for lowered distortion, improved thermal control, and higher efficiency Heavy-duty cast basket Spring-loaded terminals accept up to 4-gauge wire Stitched-on heavy-duty tinsel leads Solid pole with vent channels and aluminum shorting ring cap Top-plate cooling channels THREE OPTIONS AVAILABLE MUSIC All-around performance Patented Sundown frame Increased airflow for additional cooling Larger, highly linear spider Most Throw/X-Max MUSICAL SPL Higher musical output U-series frame Direct compression cooling Higher Efficiency SPL Extreme output (burp) U-series frame Direct compression cooling Custom cone, coil and progressive suspension configurations available. Standard 3,500-watt rating. RMS may change with custom configuration. Lightweight and incredibly powerful, the Compact Neo V.3 is the perfect combination of musicality and sheer, unrelenting motor force. Using Sundown's patented platform, the Compact features an extended pole piece with a thick shorting ring, plus a custom cross-cut pole piece with a Neodymium cap for increased output and thermal control. The solid, high-velocity pole piece uses CNC cross-cut channel cooling, a series of 16 direct air-gap vents in the back plate to keep the motor even cooler, and a vented top plate/gap.
$1,499.99 - $1,799.99
-
Sundown Audio Compact Neo V3 10" Subwoofer
Neodymium motor creates Sundown's highest motor force - as strong as a 2,000 oz. ferrite motor! 3,500-watt recommended amplifier power Large shorting rings for extremely smooth response Megaroll technology for extremely linear cone travel and low-end extension Cross-cut pole for lowered distortion, improved thermal control, and higher efficiency Heavy-duty cast basket Spring-loaded terminals accept up to 4-gauge wire Stitched-on heavy-duty tinsel leads Solid pole with vent channels and aluminum shorting ring cap Top-plate cooling channels THREE OPTIONS AVAILABLE MUSIC All-around performance Patented Sundown frame Increased airflow for additional cooling Larger, highly linear spider Most Throw/X-Max MUSICAL SPL Higher musical output U-series frame Direct compression cooling Higher Efficiency SPL Extreme output (burp) U-series frame Direct compression cooling Custom cone, coil and progressive suspension configurations available. Standard 3,500-watt rating. RMS may change with custom configuration. Lightweight and incredibly powerful, the Compact Neo V.3 is the perfect combination of musicality and sheer, unrelenting motor force. Using Sundown's patented platform, the Compact features an extended pole piece with a thick shorting ring, plus a custom cross-cut pole piece with a Neodymium cap for increased output and thermal control. The solid, high-velocity pole piece uses CNC cross-cut channel cooling, a series of 16 direct air-gap vents in the back plate to keep the motor even cooler, and a vented top plate/gap.
$1,499.99 - $1,799.99
-
Sundown Audio U-Series v.2 15" Subwoofer
2000 Watts RMS / 4000 Watts Peak Dual 2 or 4 ohm voice coils Optimized for small ported or bandpass enclosures Aluminum 3” voice coil former for superior heat dissipation High-temperature copper voice coil Double stitched surround Heavy-duty cast basket Spring-loaded terminals accept up to 8-gauge wire Stitched-on heavy-duty tinsel leads Solid pole with vent channels and aluminum shorting ring cap Rear gap-venting Top-Plate Cooling Channels Designed to be at home in the competition lanes or playing your favorite music, the U Series is the premier “standard suspension” woofer in the Sundown lineup. A double-stacked 9.4-inch wide ferrite magnet system is coupled to a thick top plate. A thick set of shorting rings are used inside the magnets and on the pole cap, smoothing out frequency response while doubling as a heat sink and airflow guide. A custom aluminum frame was designed specifically for the U Series. It’s substantially thicker and equipped with heat dissipation ribs at the bottom of the frame. The U v.2 motor also features an extended pole piece to keep the coil under perfect control under high stress. The coil temperature is controlled with machined, high-velocity pole channels and a series of 16 direct air-gap vents in the back plate. Dimensions
$669.99
-
Sundown Audio U-Series v.2 12" Subwoofer
2000 Watts RMS / 4000 Watts Peak Dual 2 or 4 ohm voice coils Optimized for small ported or bandpass enclosures Aluminum 3” voice coil former for superior heat dissipation High-temperature copper voice coil Double stitched surround Heavy-duty cast basket Spring-loaded terminals accept up to 8-gauge wire Stitched-on heavy-duty tinsel leads Solid pole with vent channels and aluminum shorting ring cap Rear gap-venting Top-Plate Cooling Channels Designed to be at home in the competition lanes or playing your favorite music, the U Series is the premier “standard suspension” woofer in the Sundown lineup. A double-stacked 9.4-inch wide ferrite magnet system is coupled to a thick top plate. A thick set of shorting rings are used inside the magnets and on the pole cap, smoothing out frequency response while doubling as a heat sink and airflow guide. A custom, substantially thicker aluminum frame was designed specifically for the U Series, equipped with heat dissipation ribs. The U v.2 motor also features an extended pole piece to keep the coil under perfect control under high stress. The coil temperature is kept in check via a high-velocity solid pole / machined pole channels arrangement and a series of 16 direct air-gap vents in the back plate. Dimensions
$549.99
-
Sundown Audio SLD-Series SD-2 12" Shallow Subwoofer
600 Watts RMS/1200 Watts Peak Dual 2 or 4 ohm voice coils Black Aluminum 2.5” voice coil for superior heat dissipation High-temperature 4-layer copper voice coil wire Stitched-on “Mini-XL” tinsel leads to prevent fatigue and failure Solid pole-piece and multi-vent magnetic gap Dual-magnet design for smooth acoustic response Custom tooled cone shape for reduced mechanical noise over high excursion Bolt-through motor design to ensure maximum longevity and ruggedness Sundown's SLD slim subwoofers deliver incredibly high volume through several important upgrades. These include pole-piece channels to reduce air noise and improve cooling, top-plate "slits" for better cooling and less distortion and a magnet shorting ring. Sundown has also secured the spider, motor, and aluminum pole cap with bolts, and added "mini-XL" lead wires for years of reliable service.
$259.99
-
Sundown Audio SLD-Series SD-2 10” Shallow Subwoofer
600 Watts RMS/1200 Watts Peak Dual 2 or 4 ohm voice coils Black Aluminum 2.5” voice coil for superior heat dissipation High-temperature 4-layer copper voice coil wire Stitched-on “Mini-XL” tinsel leads to prevent fatigue and failure Solid pole-piece and multi-vent magnetic gap Dual-magnet design for smooth acoustic response Custom tooled cone shape for reduced mechanical noise over high excursion Bolt-through motor design to ensure maximum longevity and ruggedness Sundown’s highest-power slim subwoofers, the SLD takes incredibly high volume by introducing numerous important upgrades: pole-piece channels for reduced air noise & increased cooling, top-plate “slits” for better cooling and less distortion, and a magnet shorting ring. Sundown also bolted down the spider, bolted the motor together, bolted on the aluminum pole cap, and added “mini-XL” lead wires for years of flawless service.
$239.99
-
Sundown Audio SAZ-1500 15th Anniversary Edition 1500W Class-D Amplifier
After 15yrs in business, We decided to bring back the amplifier that started it all, The SAZ-1500D. With its stunning glossy finish, this amp will take you back to simpler times. Still bosting a powerful 1500W Class D Korean board, you’ll have all the power you need without having to make major electrical system upgrades. Only 1500 of these have been made and each one is numberedFeatures Digital class-D linkable/dual mono block amplifier Dual MOS-FET PWM power supply Stable into 1 ohm load 24 dB/oct, variable low pass filter 24 dB/oct, variable subsonic filter 9 dB/oct, variable bass boost 180 Variable phase shift 4 ways protection circuit(thermal, voltage, speaker short and DC) Wired remote control included Product Manual
$489.99
-
Sundown Audio Sundown Audio SDDN 10" Limited Edition Competition Subwoofer
3,500 watts RMS Available in 10 through 18-inch versions Dual 1 ohm coils Mega V2 Cone Aluminum 3.3” x 80mm coil Dual 8 AWG terminals with dual-layer tinsel leads Custom cross-cut pole piece with Neodymium cap for increased output and thermal control 5-layer spider 1,336 oz (83.5 lbs) magnet with integrated thermal ventilation Optimized for Ported & 6th order enclosures Carbon cone upgrade available Designed in-house by Sundown Founder Jacob Fuller, the 3,500-watt RMS SDDN is available in 10, 12, 15, and 18-inch models. Each unit boasts a massive 83-pound motor with integrated thermal ventilation, featuring a custom cross-cut pole piece with a Neodymium cap for increased output and thermal control. Sundown’s signature Mega V2 cone is paired with a five-layer spider, a 3.3” x 80mm aluminum voice coil (dual 1-ohm), and dual tinsel leads per eight-gauge terminal.
$1,299.99
-
Sundown Audio Sundown Audio SDDN 15" Limited Edition Competition Subwoofer
3,500 watts RMS Available in 10 through 18-inch versions Dual 1 ohm coils Mega V2 Cone Aluminum 3.3” x 80mm coil Dual 8 AWG terminals with dual-layer tinsel leads Custom cross-cut pole piece with Neodymium cap for increased output and thermal control 5-layer spider 1,336 oz (83.5 lbs) magnet with integrated thermal ventilation Optimized for Ported & 6th order enclosures Carbon cone upgrade available Designed in-house by Sundown Founder Jacob Fuller, the 3,500-watt RMS SDDN is available in 10, 12, 15, and 18-inch models. Each unit boasts a massive 83-pound motor with integrated thermal ventilation, featuring a custom cross-cut pole piece with a Neodymium cap for increased output and thermal control. Sundown’s signature Mega V2 cone is paired with a five-layer spider, a 3.3” x 80mm aluminum voice coil (dual 1-ohm), and dual tinsel leads per eight-gauge terminal.
$1,399.99
-
Sundown Audio SIA-3500D v2 Full-Range Mono Amplifier
3,500 x 1 @ 1 ohm RMS 3,300 x 1 @ 2 ohms RMS 2,600 x 1 @ 4 ohms RMS Variable 12dB low pass filter: 40Hz-20kHz Variable 12dB high pass filter: 10Hz-1kHz Power, protection & clipping indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Advanced 3-speed fan design Subsonic filter Intelligent full bridge design Wired remote control with clipping indicator included Delivering tremendous power at 1, 2, or 4 ohms, the Sundown SIA amps are built with power and stability at their core. These full-bridge amplifiers feature a heavy heatsink for outstanding thermal management, while the three-speed Smart Cooling fan and advanced power supply design protects the amplifier from overheating and distorted output. Made to bang all day long, by the world champions of bass!
$424.99
