Car Audio
-
Down4Sound Down4Sound JP84 | 400W 4-Channel Amplifier
JP 84 - 4 Channel Amplifier RMS POWER: 120W x 4 @ 14.4v - 2 ohms RMS POWER: 90W x 4 @ 14.4v - 4 ohms BRIDGE POWER: Range 180 - 284w x 2 FULL RANGE DIGITAL MULTI-CHANNEL AMPLIFIER STABLE INTO 2 OHM STEREO OR 4 OHM BRIDGED HIGH SPEED MOSFET POWER SUPPLY VARIABLE HIGH PASS FILTER VARIABLE LOW PASS FILTER CROSSOVER MULTIPLY X10 BAND PASS FILTER CAPABLE CLASS: D 4 WAY PROTECTION CIRCUITS Freq Response: 10Hz - 40KHz High Pass Filter: 20Hz - 800Hz High Pass Multipliers: 1x - x10 ( 200Hz - 8 kHz) Low Pass Filter: 50 Hz - 800 Hz Low Pass Multipliers : x1 - x10 ( 500Hz - 8kHz) Signal to Noise Ratio: 95dB < Fuse Rating: 60A 4 GA input on Power Wire 8 GA input for Speaker Wire 7.87" x 7.4" W x 2.24"H
$299.99 $199.99
-
Sundown Audio Sundown Audio SA-Classic 12" Subwoofer
1000 Watt RMS/ 2000 Watt Peak Dual 2 or 4 ohm voice coils Optimized for small ported, sealed, & band-pass enclosures Large aluminum Faraday ring for smooth acoustic response High strength cast aluminum frame Low distortion motor construction High-temperature voice coil wire Spring-loaded terminals Stitched-on “XL” tinsel lead wires The SA Classic sub is a stunning combination of value, power handling, and deep excursion. It features a cast aluminum frame that houses a bulletproof custom 2.5-inch voice coil, robust double-layered Nomex spider, and SPL competition-grade paper cone. These components are built into a flexible design that works well in any type of enclosure. Enclosure Designs .Zip File
$339.99
-
Sundown Audio Sundown Audio E-Series V.4 12” Subwoofer
750 Watts RMS / 1500 Watts Peak Dual 2 or 4 ohm voice coils Optimized for ported enclosures Class-leading 14mm Xmax Double-stacked magnet Vented magnetic gap & pole piece for superior cooling High strength stamped steel frame High temp 4-layer copper voice coil wire High-quality push terminals Stitched-on Mini-XL tinsel leads Through relentless research in our North Carolina Headquarters, Sundown optimized a 2.5” voice coil and a truly unique motor design to get the deepest possible bass response out of a 12” subwoofer. The subwoofer showcases a distinctive motor design, featuring a heavily vented magnetic gap and solid pole piece, enabling exceptional thermal power handling. The spider itself is a high strength poly-cotton blend designed to handle the full capacity of the motor. To provide an additional level of ruggedness the spider is bolted down and glued to the frame. Its motor geometry allows for a remarkable 14mm one-way linear Xmax, delivering excursion equivalent to far larger cones.
$244.99
-
Sundown Audio Sundown Audio E-Series V.4 10” Subwoofer
750 Watts RMS / 1500 Watts Peak Dual 2 or 4 ohm voice coils Optimized for ported enclosures Class-leading 14mm Xmax Double-stacked magnet Vented magnetic gap & pole piece for superior cooling High strength stamped steel frame High temp 4-layer copper voice coil wire High-quality push terminals Stitched-on Mini-XL tinsel leads Through relentless research in our North Carolina Headquarters, Sundown optimized a 2.5” voice coil and a truly unique motor design to get the deepest possible bass response out of a 10” subwoofer. The subwoofer showcases a distinctive motor design, featuring a heavily vented magnetic gap and solid pole piece, enabling exceptional thermal power handling. The spider itself is a high strength poly-cotton blend designed to handle the full capacity of the motor. To provide an additional level of ruggedness the spider is bolted down and glued to the frame. Its motor geometry allows for a remarkable 14mm one-way linear Xmax, delivering excursion equivalent to far larger cones.
$224.99
-
Down4Sound Down4Sound JP34AB | 590 WATT RMS Class AB 4CH Amplifier
JP 34 CLASS AB Amplifier The long-awaited return of the JP34AB is finally here, and it's better than ever. This amp is a rare piece of class AB greatness, and it's packed with features that will take your audio to the next level. The accurate channel clip indicator is a great tool for keeping your sound in check, and the thermal stabilization of internal high flow fans will keep your amp running at its best. With its 90's Purple color, this amp is sure to turn heads, so don't wait – order now and be one of the first to experience the JP34AB. RMS power, 2ohm : 200W x 4 RMS at 14.4V RMS power, 4ohms : 134W x 4 RMS at 14.4v RMS power, 4ohms Bridged: 450W x 2 (manual has typo) Frequency Response: 10 Hz - 45KHz High Pass Filter: 20Hz - 800Hz High Pass Filter Multiply: x1 - x10 (200Hz -8KHz) Low Pass Filter: 50Hz - 800Hz Low Pass Filter Multiply:x1, x10 ( 500Hz - 8KHz ) Input sensitivity: 6V - 0.2V Signal to Noise Ratio: 100Db T.H.D @ 4ohm: less than 0.1% Fuse rating: 100A Length (inches): 19.68" Width x Height (inches): 7.4" W x 2.24" H 9-16V Operating Range
$279.99
-
Sundown Audio Sundown Audio SA-Classic 10" Subwoofer
1000 Watt RMS/ 2000 Watt Peak Dual 2 or 4 ohm voice coils Optimized for small ported, sealed, & band-pass enclosures Large aluminum Faraday ring for smooth acoustic response High strength cast aluminum frame Low distortion motor construction High-temperature voice coil wire Spring-loaded terminals Stitched-on “XL” tinsel lead wires The SA Classic sub is the perfect combination of power handling and deep excursion. A cast aluminum frame houses a bulletproof custom 2.5-inch voice coil, robust double-layered Nomex spider, and SPL competition-grade paper cone, all built into a flexible design that works in any kind of enclosure. Enclosure Designs .Zip File
$319.99
-
Kicker Kicker 46CXA8001T 800 Watt Mono Block Car Audio Amplifier/Amp
CX800.1 Mono Amplifier The CXA800.1 Mono Amplifier is built for affordable power and performance, thanks to optimized circuit layout and high-grade internal components. About That Power This CX-Series Mono Amp is now one-ohm stable, giving you even more power and wiring options for your system! Using a Class-D power plant, the CXA800.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump with a simple turn of the optional CXARC Remote Bass Controller. A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. Use the full-range outputs to expand your system with other bass amps, or a full-range amp to complete your system. CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time! Expand your system with full-range, RCA pass-through outputs, then choose a “standard” mount or a cool vertical mount with the included hardware. This CX.1 amplifier delivers as much as 800 watts into one bass channel. See below for more details. Efficient Class-D amplifier Three-second turn-on/off delay to eliminate unwanted interference Variable 12dB crossovers provides control to dial in perfect sound KickEQ™ 6dB variable bass boost for those additional low frequencies 24dB subsonic filter for protection from potentially damaging frequencies FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio Accepts up to 40-volt input signal Small footprint for easier installation Compatible with CXARC Remote Bass Control Vertical mounting hardware included for another unique look Specifications MODEL CXA800.1 Power (watts/ch) 4 Ohm 300x1 Power (watts/ch) 2 Ohm 600x1 Power (watts/ch) 1 Ohm 800x1 CXRC Remote Bass Capable (sold sep.) yes Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) 8-1/8, 20.6 Frequency Response (Hz): 25-200, +0/-1dB Input Sensitivity: 250mV-10V (Low Level)1V-40V (High Level) Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave Subsonic Filter: 25Hz @24dB/octave KickEQ™ Boost Variable 0-6dB @40Hz
$299.99
-
Kicker Kicker 46CXA18001T 1800W CX Series Mono Block Class D Car Audio Amplifier/Amp CX
CX1800.1 Mono Amplifier CX-Series Amps reach massive power levels thanks to an optimized circuit layout and the highest-grade internal components. Highly efficient heat sinks keep the amp cool with a sophisticated new look. Mono amps offer an optional remote level control to adjust your bass right from the dash. Power Station The CXA1800.1 Mono Amplifier is built for big bass in a sleek, yet affordable package. Using a Class-D power plant and FIT+™ (Fail-safe Integration Technology-PLUS) for superior dependability, this amp features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump with a simple turn of the optional CXARC Remote Bass Controller. CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time! A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. Use the full range outputs to expand your system with other bass amps, or add a full range amp to complete your system. This CX-Series Amplifier delivers as much as 1,800 watts into one bass channel. See below for more details. Efficient Class-D amplifier Three-second turn-on/off delay to eliminate unwanted interference Variable 12dB crossovers provides control to dial in perfect sound KickEQ™ 6dB variable bass boost for those additional low frequencies 24dB subsonic filter for protection from potentially damaging frequencies FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio Accepts up to 40-volt input signal Small footprint for easier installation Compatible with CXARC Remote Bass Control Vertical mounting hardware included for another unique look Specifications MODEL CXA1800.1 Power (watts/ch) 4 Ohm 900x1 Power (watts/ch) 2 Ohm 1800x1 Power (watts/ch) 1 Ohm 1800x1 +/-10% CXRC Remote Bass Capable (sold sep.) yes Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) 14-3/8, 36.4 Frequency Response (Hz): 25-200Hz Input Sensitivity: 250mV-10V (Low Level)1V-40V (High Level) Signal-to-Noise Ratio: 95dB Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave Subsonic Filter: 25Hz @24dB/octave KickEQ™ Boost Variable 0-6dB @40Hz
$549.99 $499.99
-
Down4Sound Down4Sound JP8 | 800W RMS Monoblock Amplifier
JP8 AMP: 800W PLUS RMS MONOBLOCK Amplifier RMS power, 1ohm : 700W x 1 @ 12v | 850W x 1 @ 14.4v RMS power, 2ohms: 500W x 1 @ 12v |650W x 1 @ 14.4v RMS power, 4ohms : 490W x 1 @ 12v RMS power, 2ohm Linked: 2300W x 1 - 14.4v Frequency Response: 10 Hz - 270 Hz Low Pass Filter: 35 Hz - 250 Hz Subsonic Filter: 10 Hz - 50 Hz Bass Boost: 0 - 9 Db Input sensitivity: 6V - 0.2V signal to Noise Ratio: 97dB < T.H.D @ 4ohm: less than 0.1% Single unit fuse rating: 120A Strapped fuse rating 220A Length (inches) Width x height (inches):11.81" x 7.4"W 2.24" H Damping Factor: 100 8 GA input for Speaker Wire 4 GA input on Power Wire
$199.99
-
Kicker Kicker 47KSC6904 6x9 6" x 9" 150W 2-Way Coaxial Car Audio Speakers KSC KS
KICKER’s elite KS-Series Coaxial Speakers upgrade your audio to new levels of accuracy with extended frequency response and the smoothest highs. Potent Performance KICKER KS-Series Speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. Internally dampened polypropylene cones and durable rubber surrounds assist the woofers in creating precise midrange and midbass, while high-quality silk-dome tweeters deliver natural, detailed highs. With less than a 3-inch mounting depth and just three millimeters of tweeter protrusion, the KSC690 is a perfect fit in almost every vehicle on the road today. They work best with 15 to 150 watts of recommended power. See below for more details. High power handling Silk-dome tweeters for a smooth sound Polypropylene woofer and tough rubber surrounds Thin-mount design easily fits behind factory grilles Grilles included Specifications Speaker Design 2-Way Woofer [in, mm] 6 x 9, 160 x 230 Tweeter [in, mm] 1, 25 Rated Impedance [Ω] 4 Recommended Amplifier Power [Watts RMS] 15-150 Sensitivity [1W, 1m] 92 Frequency Response [Hz] 30-21k Mounting Hole Diameter [in, mm] 5-11/16 x 8-7/16, 144 x 215 Top Mount Depth [in, mm] 3-3/16, 81 Bottom Mount Depth [in,mm] 3-11/16, 93 Tweeter Protrusion [in,mm] 1/16, 1 Grilles Yes Tweeter Magnet Material Neodymium Tweeter Dome Material Silk Woofer Cone Material Polypropylene Woofer Surround Material Rubber
$159.99 $109.99
-
Sundown Audio Sundown Audio GT-1R Super Tweeter
Power Handling: 100 Watts RMS Impedance: 4 or 8 Ohms Frequency range: 4kHz - 20kHz Sensitivity 100dB Sold Individually Handling 100 watts and sporting a slender mounting ring, the GT-R1 is the choice when you want the tweeter to take up a smaller footprint on your door, but want to hear those highs no matter how loud the bass is. With an incredible 100dB sensitivity and a wide frequency range, this super tweeter makes the most out of every watt you give it.
$39.99
-
Sundown Audio Sundown Audio Nightshade NS-Series NS6 15" 3000W Subwoofer NS v.6
3500 Watt RMS / 7000 Watt Peak Dual 1 or 2 ohm voice coils Optional carbon cone/dustcap available Custom tooled basket Custom-tooled ultra-linear spider packs Extended shorting ring Eight-layer voice coil Custom tooled basket Cast aluminum cooling ring Ultra-linear spider pack Unique air exchanging system forces hot air out and cool air in Aluminum vent ring Ultra-linear Mega Roll V2 surround Features: The Nightshade 3,000-watt Neodymium sub is engineered to deliver incredibly powerful low end, with an extremely linear excursion and next-level thermal management. It features an eight-layer voice coil for excellent power handling and an extended shorting ring to minimize distortion and deliver a smooth, highly accurate sound at extreme SPL levels.
$1,049.99
-
Clarion Clarion FZ309 Single-DIN Multimedia Receiver USB, AUX, Bluetooth
Features Built-in Bluetooth® Hands-free and Audio Streaming Superior iPod® and iPhone® Connectivity Front AUX Input Lets You Easily Connect to External Sources Beat EQ for Customizable Sound 4-Channel / 2 Volt RCA Output Low Pass Filter for Subwoofer
$199.99 $89.99
-
Sundown Audio X-Series XV4 12" 3000W RMS Subwoofer
The Sundown Audio Xv4 12" Subwoofer is built for those who demand real power and precision in their sound system. Designed with premium Xv4 coils, this subwoofer delivers a massive 3000W RMS and 6000W peak power while maintaining outstanding clarity and control. With a durable, heavy-duty motor and optimized cooling system, the Xv4 ensures consistent performance even during extended play. Whether you’re upgrading your car audio or building a competition-level system, this subwoofer delivers thunderous low frequencies that stay tight and accurate. The precision-engineered cone and suspension system provide minimal distortion and maximum output. Pair it with a well-tuned ported enclosure for deep, room-shaking bass that brings your music to life. Built to handle extreme sound pressure, the Xv4 series continues Sundown Audio’s legacy of reliability, innovation, and unmatched performance. Key Features 12-inch subwoofer with Xv4 voice coils RMS Power: 3000W, Peak Power: 6000W Available in Dual 1Ω and Dual 2Ω versions High-efficiency motor structure with strong BL factor Optimized for ported enclosures (2.5 cu. ft @ 32Hz) Xmax: 30mm for deep excursion and accurate bass Reinforced cone for durability under extreme pressure Designed for audiophiles and SPL enthusiasts
$799.99
-
Sundown Audio Stereo Integrity SIQ 200.2 High-Fidelity 2-Channel Amplifier
Stereo Integrity SIQ 200.2 Amplifier: Purity and Power in Two ChannelsThe Stereo Integrity SIQ 200.2 brings true high-fidelity audio engineering back to mobile sound systems. Built by audiophiles for the most discerning listeners, this powerful 2-Channel Class A/B amplifier prioritizes signal integrity above all else. Its design features zero filters, zero crossovers, and zero EQ, delivering a full bandwidth signal (5 Hz to 150,000 Hz) that is clean, precise, and uncompromised. This is the foundation for an accurate soundstage and breathtaking sonic detail.Uncompromised Audiophile ConstructionEvery component in the SIQ 200.2 was selected based on its acoustic performance and long-term durability: Output Transistors: Utilizes audiophile-grade TO-3 output transistors for clean, linear power delivery. Internal Circuitry: Features high-quality UPC4570 op-amps, IRFPO64N power supply transistors, and sand cast resistors throughout the construction. Aesthetics: Protected by a thick extruded aluminum chassis with a copper anodized shielded transformer cover to minimize electromagnetic interference, all visible through a large plexiglass viewing window. High Power, Ultra-Low Distortion PerformanceThe SIQ 200.2 delivers robust power with unmatched fidelity, validated by Audio Precision measurements: Rated RMS Power Output (2 Channels): 200W RMS x2 @ 4Ω High Current Output: 400W RMS x2 @ 2Ω Bridged Monoblock Power: 800W RMS x1 @ 4Ω Total Harmonic Distortion (THD): 0.03 % (Exceptional clarity) Signal-to-Noise Ratio (SNR): 92 dB Installation and Specifications Purity Control: Features a discrete gain knob per channel for precise level matching. Connections: Premium Tiffany-style RCA connections accepting inputs up to 16 Volts. Dimensions: Compact size at 14 x 8 x 2 Inches. Current Draw: Maximum current draw of 85.6 amps. The SIQ 200.2 is the ultimate 2-channel solution for audiophiles seeking true, powerful sound reproduction in their vehicle. Amplifiers Specifications Frequency Response Minimum 5 Hz Frequency Response Maximum 150,000 Hz Signal-to-Noise Ratio (SNR) 92 dB Total Harmonic Distortion (THD) 0.03 % Dimensions (W x H x D) 14 x 8 x 2 Inches Rated RMS power output into all 4 channels at 4 ohm 200 Watts Rated RMS power output into all 4 channels at 2 ohm 400 Watts Bridged RMS power into 2 channels at 4 ohm 800 Watts Power Idle Current Draw 1.3 amps Maximum Current Draw 85.6 amps Connections RCA Input Maximum 16 Volts
$359.00
-
Sundown Audio X-Series XV4 15" 3000W RMS Subwoofer
The Sundown Audio XV4 15″ Subwoofer delivers the ultimate low-frequency experience for serious bass lovers. Built with the advanced X v.4 coil design, this subwoofer offers extreme power handling and consistent performance under heavy loads. With up to 3000W RMS and 6000W peak power, it ensures clean, distortion-free sound even at the highest volumes. The durable motor structure and optimized cone area (72.58 in²) provide deeper lows and better air displacement for maximum sound pressure. Engineered for flexibility, the XV4 15″ works best in ported enclosures (4.25 cu ft, tuned to 32 Hz) but can also be customized for complex box designs like 4th order setups. Every element — from the high-grade magnet to the precision voice coil — is crafted to deliver unmatched performance and reliability. Perfect for audiophiles and competitors seeking solid bass impact, this subwoofer combines engineering excellence and raw power in one package. Key Features 15″ high-performance subwoofer with X v.4 coils 3000W RMS / 6000W peak power handling 30mm Xmax for strong linear excursion Optimized motor design (9.25″ diameter) Recommended ported box: 4.25 cu ft @ 32 Hz Robust cone design for high SPL output Ideal for competitive and high-end car audio systems
$849.99
-
Sundown Audio Stereo Integrity SIQ 200.4 High-Fidelity 4-Channel Amplifier
Stereo Integrity SIQ 200.4 Amplifier: Purity and Power in Two Channels The Stereo Integrity SIQ 200.4 brings true high-fidelity audio engineering back to mobile sound systems. Built by audiophiles for the most discerning listeners, this powerful 2-Channel Class A/B amplifier prioritizes signal integrity above all else. Its design features zero filters, zero crossovers, and zero EQ, delivering a full bandwidth signal (5 Hz to 150,000 Hz) that is clean, precise, and uncompromised. This is the foundation for an accurate soundstage and breathtaking sonic detail.Uncompromised Audiophile ConstructionEvery component in the SIQ 200.4 was selected based on its acoustic performance and long-term durability: Output Transistors: Utilizes audiophile-grade TO-3 output transistors for clean, linear power delivery. Internal Circuitry: Features high-quality UPC4570 op-amps, IRFPO64N power supply transistors, and sand cast resistors throughout the construction. Aesthetics: Protected by a thick extruded aluminum chassis with a copper anodized shielded transformer cover to minimize electromagnetic interference, all visible through a large plexiglass viewing window. High Power, Ultra-Low Distortion PerformanceThe SIQ 200.4 delivers robust power with unmatched fidelity, validated by Audio Precision measurements: Rated RMS Power Output (2 Channels): 200W RMS x2 @ 4Ω High Current Output: 400W RMS x2 @ 2Ω Bridged Monoblock Power: 800W RMS x1 @ 4Ω Total Harmonic Distortion (THD): 0.03 % (Exceptional clarity) Signal-to-Noise Ratio (SNR): 92 dB Installation and Specifications Purity Control: Features a discrete gain knob per channel for precise level matching. Connections: Premium Tiffany-style RCA connections accepting inputs up to 16 Volts. Dimensions: Compact size at 14 x 8 x 2 Inches. Current Draw: Maximum current draw of 85.6 amps. The SIQ 200.4 is the ultimate 2-channel solution for audiophiles seeking true, powerful sound reproduction in their vehicle. Amplifiers Specifications Frequency Response Minimum 5 Hz Frequency Response Maximum 150,000 Hz Signal-to-Noise Ratio (SNR) 92 dB Total Harmonic Distortion (THD) 0.03 % Dimensions (W x H x D) 27.25 x 8 x 2 Inches Rated RMS power output into all 4 channels at 4 ohm 200 Watts Rated RMS power output into all 4 channels at 2 ohm 425 Watts Bridged RMS power into 2 channels at 4 ohm 875 Watts Power Idle Current Draw 2.6 amps Maximum Current Draw 176 amps Connections RCA Input Maximum 16 Volts
$679.00
-
Sparked Innovations Sparked Innovations 12" Bass Blaster Car Audio Subwoofer 2000W DVC
The Bass Blaster subwoofer series is a truly unique blend of car audio nostalgia and modern technology. Designed and built as a product of love for car audio, this subwoofer will look as good in your installation as it will sound. As lifelong enthusiasts ourselves, we knew the demands this subwoofer would need to meet. The engineering expertise of Jacob Fuller, founder of Sundown Audio, has led to a subwoofer that can take the abuse of high-powered systems that the modern-day enthusiast likes to throw at everything. Advanced cooling techniques, high-excursion linear suspension, and classically inspired aesthetics mean The Bass Blaster will give you the best-sounding bass, for a long time, as you turn the heads of anyone that takes a look. Design Our philosophy with The Bass Blaster was to recreate the feel of car audio from our youth. The blue surround is not just our branding color, it is an homage to woofers of the 1990s that used brightly colored surrounds as a signature look. The balance of the blue to the grey/silver basket and cone harkens back to the early 2000s when some of our favorite woofer models sported a distinct style. The aluminum dust cap gives depth and texture to the woofer as a whole and adds rigid reinforcement to the cone body. The genesis of the design was the motor itself, the large vent for the four-inch coil caught our eye in car audio shops in the 1990s. Jacob Fuller captured that look while tapering the vent and adding a pole cap so as to not compromise modern cooling techniques for the best performance-to-aesthetics ratio possible. Topped off with the metal mesh over the magnet slugs, The Bass Blaster is the 90s/2000s woofer we all wish we had in our teens, but even better that we have it in our 40s. General Specifications Power handling 2000W RMS Dual voice coil D2 or D4 Xmax (mm one way) 25 Xmech (mm one way) 50 Heat-treated 4-layer 4-inch coil Quad braided tinsel leads Multi-layer foam surround in Sparked Blue Aluminum dust cap Cast aluminum frame High-velocity motor cooling Measurements Parameter Metric (mm) Imperial (in) Outer Diameter 313.7 12.35 Mounting Diameter 283.0 11.14 Overall Depth 250.2 9.85 Mounting Depth 220.2 8.67 T/S Parameters Parameter D2 D4 RE (Ohms) 3.97 5.99 Fs (Hz) 29.44 30.82 VAS (L) 13.35 12.28 Qes 0.53 0.61 Qms 5.82 6.46 Qts 0.48 0.55 BL 30.12 35.19 Mms (Grams) 650.19 645.01 Cms (uM/N) 44.95 41.34 Sensitivity (dB @2.83Vrms/1m) 82.90 @ 1 kHz 80.74 @ 1 kHz ENCLOSURE RECOMMENDATIONS Size Enclosure Type Volume (ft³) Port Tuning (Hz) Details Type Dia. (in) Length (in) 12" QB3 - Flat Response 0.90-1.15 Round 3 36" @ 0.95ft³29" @ 1.15ft³ 23 Details 12" QB3 - Low-Frequency Peak 1.25-2.00 Round 3 20" @ 1.25ft³11" @ 2.00ft³ 26 Details 12" SBB4 - Flat Response 0.50-0.75 Round 3 35" @ 0.50ft³22" @ 0.75ft³ 32 Details 12" SBB4 - Loud Bass Response 1.25-2.00 Round 4 23" @ 1.25ft³14" @ 2.00ft³ 32 Details ×
$425.99
-
Power Acoustik Power Acoustik PL-51B Single Din MP3/USB/SD/Bluetooth Car Audio Stereo/Receiver
PL-51B Single DIN Digital Media Receiver w/ SD/USB Playback & AM/FM Receiver Bluetooth 2.0 Hands-Free Calling & Music Streaming Playback from USB, SD & Aux Inputs Theft Deterrent Detachable Face Faceplate Carrying Case Included
$39.99
-
Sundown Audio SFB-600D 600W Full Range Mono Amplifier
600 @ 1 ohms RMS 350 @ 2 ohms RMS 250 @ 4 ohms RMS Variable 12dB low pass filter: 80HZ – 20kHZ Variable 12dB high pass filter: 15HZ – 1kHZ Variable 12dB Bass Boost @ 50Hz 0-9dB Power, protection & clipping indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Wired remote control with clipping indicator The flexible SFB (Sundown Full Bridge) amplifiers pack a powerful punch in a compact size! Stable down to 1 ohm, the full-range SFB can be used as a subwoofer amp, or as an ideal power source for an array of P.A. speakers. If you are looking for raw power on a budget, look no further than the SFB Series from Sundown Audio.
$174.99
-
Sundown Audio Sundown Audio Nightshade NS-Series NS6 18" 3000W Subwoofer NS v.6
3500 Watt RMS / 7000 Watt Peak Dual 1 or 2 ohm voice coils Optional carbon cone/dustcap available Custom tooled basket Custom-tooled ultra-linear spider packs Extended shorting ring Eight-layer voice coil Custom tooled basket Cast aluminum cooling ring Ultra-linear spider pack Unique air exchanging system forces hot air out and cool air in Aluminum vent ring Ultra-linear Mega Roll V2 surround The Nightshade 3,000-watt Neodymium sub is engineered to deliver incredibly powerful low end, with an extremely linear excursion and next-level thermal management. It features an eight-layer voice coil for excellent power handling and an extended shorting ring to minimize distortion and deliver a smooth, highly accurate sound at extreme SPL levels.
$1,099.99
-
Kicker Kicker 46CXA360.4T 360W 90x4 Watt 4-Channel Car Audio Amplifier/Amp CXA360.4T CXA
CX360.4T 4-Channel Amplifier The CXA360.4T Four-Channel Amplifier is built to power all your door speakers in a single, powerful package. Flexible and Fun Using Class A/B power, this amp features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump. A powerful 12dB crossover is also included, letting you quickly tune your system to perfection. CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time! Highly efficient heat sinks keep the amp cool with a sophisticated new look, while KICKER’s FIT+™ (Fail-safe Integration Technology-PLUS), gives you outstanding noise rejection - even with premium factory audio systems. This CX-Series Amplifier delivers as much as 90 watts into four full-range channels, or 180 watts into two bridged channels. See below for more details. Class A/B full-range channels Three-second turn-on/off delay to eliminate unwanted interference Variable 12dB crossovers provides control to dial in perfect sound KickEQ™ 6dB variable bass boost for those additional low frequencies FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio Accepts up to 40-volt input signal Small footprint for easier installation Vertical mounting hardware included for another unique look Compatible with CXARC Remote Bass Control Specifications MODEL CXA360.4 Power (watts/ch) 4 Ohm Stereo 65x4 Power (watts/ch) 2 Ohm Stereo 90x4 Power (watts/ch) 4 Ohm Mono 180x2 CXRC Remote Bass Capable (sold sep.) yes Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) 12-1/2, 31.7 Frequency Response (Hz): 10Hz-20kHz Input Sensitivity: 250mV-10V (Low Level)1V-40V (High Level) Signal-to-Noise Ratio: 95dB Active Crossover: HI, LO or OFF; Variable 50–200Hz @ 12dB/Octave Subsonic Filter: n/a KickEQ™ Boost Variable 0-6dB @40Hz
$229.99
-
Sundown Audio Sundown Audio U-Series v.1 12" Subwoofer
The Sundown U Series is our premier “standard suspension” woofer series. It is the most direct replacement for the world famous Z v.3 woofer line which we produced from 2011 to 2016 before launching the “new platform” Z v.4 series. Due to numerous advancements in our design process the U Series is able to deliver performance on-par with the Z v.3 series but at a much lower cost. We start with a double-stacked / 8.66” wide Y35 grade ferrite magnet system coupled to a one-piece, bumped T-Yoke and a 0.6” thick top-plate. Just as with the Z v.3 before it and our other high-end subwoofers we also add a very thick (5mm thickness) aluminum shorting ring inside the magnets to reduce static inductance and level out inductance over stroke. The U series motor also features a 0.6” long pole-extension to keep the coil under control at high levels of excursion. The voice coil is a 2.36” long / 3” diameter 4-layer aluminum winding / aluminum former unit – which is the same coil we use in our X v.2 series and, thus, the U series has the same 1500-watt RMS ratings. The coil temperature is kept in check by a heavily smoothed / high-velocity pole-vent and a series of ten direct air-gap vents in the back plate. The U series also features newly tooled cast aluminum vent rings in between the frame and top plate to effectively exchange air at a high velocity over the voice coil beneath the spider landing. The U series features an all-new cast aluminum frame series to the Sundown line which allows for taller cones than the older frames used on the Z v.3 series. The taller cones provide enhanced coil stability and increased mechanical excursion capability. We also tooled matching cast-aluminum surround clamps for the U series to ensure durability in the most demanding situations. The surrounds and cone bodies have been fully custom tooled especially for the U series and are stronger / support more excursion than the Z v.3 series cones and surrounds. The new cone bodies also feature an indentation for the same wide-flange, ultra-strong dust caps as our new platform subwoofers. If you are looking for a woofer that sounds similar to the SA series but handles significantly more power… the U series is exactly what you need. It has been designed to live up to the reputation earned by our Z v.3 series both in terms of every-day music enjoyment and SPL competition. Specifications Black Aluminum 3” voice coil former for superior heat dissipation High Temperature Round-Wire CCAW voice coil with high-temp black adhesive Double stitched surround Heavy duty cast basket Spring loaded terminals accept up to 8 gauge Stitched-on double-XL tinsel leads Rear vented pole piece Rear drilled gap-venting Innovative high-velocity cast aluminum vented frame spacer ring Magnet ID shorting ring Top-Plate Cooling Channels Cast Aluminum surround bolt-on rings Optimized for small ported or bandpass enclosures Specifications T/S SPECS U 12" D2 U 12" D4 RE (Ohms) 3.8 6.1 FS (Hz) 42.2 40.0 VAS (L) 17.9 12.3 Qes 0.30 0.38 Qms 2.67 2.93 Qts 0.27 0.34 Le (mH) 2.41 3.67 BL (NA) 31.2 33.7 Mms (Grams) 290.2 284.5 Cms (uM/N) 0.05 0.06 Sens (dB @ 1w/1m) 88.4db 85.0db Suggested SD-2 10" Sealed 0.5 ft^3 Ported 1.0 ft^3 Displacement 0.11 ft^3 Depth 4.75" Outside Diameter 10 1/2" Cut-Out 9 1/4" Recommended Tuning 32hz Recommended Port Area 16 in^2
$549.99 $349.99
-
Sundown Audio Sundown Audio SALT-3 3000W Class D Amplifier
6,000 x 1 @ 2 ohms RMS (when linked) 3,000 x 1 @ 1 ohms RMS mono 1,500 x 1 @ 2 ohms RMS mono 750 x 1 @ 4 ohms RMS mono 24dB variable subsonic filter: 10HZ - 50HZ 24dB variable low pass filter: 35HZ - 250HZ Frequency Response : 10 Hz – 250 HZ Variable bass boost @ 45Hz 0-9dB Phase shift control 0-180 degrees Power, clipping and protection indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Included wired remote control displays voltage, temperature, and clipping Feel the power of the Sundown SALT-3! This strappable amp delivers a massive 6,000 watts at 2 ohms when attached to another SALT-3, or pump out 3,000 watts at 1 ohm on its own. The amp features both a 24dB variable subsonic and low pass filter, along with a bass boost at 45Hz, letting you dial in your personal, perfect sound. The phase shift control makes it easy to precisely adjust the output. With onboard indicators for power, clipping, and protection you’ll have full control over your setup. Use the included wired remote control to see voltage, temperature, and clipping at a glance.Producing optimum power at realistic voltages (the 12s, rather than needing 14+ volts), the SALT – Sundown Audio Low-Voltage Technology – is Sundown’s answer! SALT amplifiers represent the pinnacle of Korean Class-D amplifier technology. Whether you are a world-class SPL competitor or simply want to bang harder than absolutely anyone else, the SALT series will be right at home in your system. Specifications Input Sensitivity : 6V - 0.2V Efficiency : 90% < Signal / Noise Ratio : 90DB < Damping Factor : 400 < Tested Voltage & THD : 12.8V & Less Than 1% THD Operation Voltage : DC 9V - 15.5V Power Input Recommended Fuse : 300 Amps Dimensions : 19.68” L x 8.67” W x 2.80” H
$1,199.99
