Affordable 4-Channel and Mono Car Audio Amplifiers. Built For Competition.
Amplifiers
-
Sundown Audio Horizon HZ-900.5 900 Watt 5-Channel Amplifier
Sundown Audio HZ-900.5 | Horizon Series 5-Channel Amplifier (900W RMS)Everything You Need. Nothing You Don’t.The HZ-900.5 is Sundown’s all-in-one solution for full-system amplification. With four channels dedicated to mids and highs and a separate subwoofer channel, this 5-channel amp offers up to 150W x4 @ 2 ohms on CH1-4, and 500W @ 2 ohms on CH5. It’s perfect for anyone who wants a single, clean install that powers an entire soundstage — from vocals to the deepest bass.Advanced crossovers let you independently dial in your full-range and subwoofer sections. You get high-pass filters for CH1-4, and both low pass and subsonic filters on CH5. Add in DC Sense, high-level input capability, and Sundown's bulletproof 4-way protection, and you’ve got one of the most versatile and powerful compact amps in its class.Ideal for daily drivers, stealth builds, or any vehicle where space matters but sound can't be compromised, the HZ-900.5 is as smart as it is strong.Specs: RMS Power @ 14.4V• CH1-4: 100W x4 @ 4Ω / 150W x4 @ 2Ω• CH5 (Sub): 200W @ 4Ω / 500W @ 2Ω High Pass Filter (CH1-4): 27Hz – 250Hz Low Pass Filter (CH5): 50Hz – 250Hz Subsonic Filter (CH5): 10Hz – 50Hz Input Sensitivity: 6V Max Signal-to-Noise Ratio: 95dB Fuse Rating: 100A Dimensions: 11.25" x 4.63" x 2.2" Weight: 4.12 lbs (1.87 kg)
$449.99
-
Sundown Audio Horizon HZ-80.4 4-Channel Amplifier
Sundown Audio HZ-80.4 | Horizon Series 4-Channel Full-Range Amplifier (80W x4)Versatility Meets Clarity.The HZ-80.4 is your go-to solution for adding clean, controlled power across your mids and highs. With 80 watts RMS x 4 channels at 4 ohms, it’s the perfect amp for speaker upgrades, active component setups, or small subwoofers that need headroom without the distortion. This amp runs cool and clean — and with its compact chassis, it fits just about anywhere.The Horizon Series amps don’t cut corners. This model includes adjustable high and low pass filters on all four channels, a full-range passthrough option, and high-level input capability to simplify factory integration. Run it passive or active — bridge it for bigger loads — the HZ-80.4 gives you maximum control and Sundown-grade output from a surprisingly small form factor.Whether you’re upgrading a factory system or building something fresh, the HZ-80.4 gives your sound system the foundation it needs to shine. Clean mids, crisp highs, tight control. Specs: RMS Power @ 14.4V• 4 Ohm: 80W x4• 2 Ohm: 130W x4 High Pass Filter (CH1-4): 27Hz – 250Hz Low Pass Filter (CH1-4): 27Hz – 250Hz Input Sensitivity: Up to 6V Signal-to-Noise Ratio: 95dB Fuse Rating: 50A Dimensions: 7.4" x 4.63" x 2.2" Weight: 2.54 lbs (1.15 kg)
$259.99
-
Sundown Audio SPS-1500 Powersports AGM Battery
1,500 max amps 12-volt AGM Shock resistant Waterproof All-season Zero maintenance M6 terminal hardware included You’ve got the loudest stereo on the trail, enough lighting to give all your friends a tan at once, and a winch so powerful it can pull a small tank out of a tar pit. One thing’s for sure: your factory battery was never designed to withstand that kind of stress. We have your answer.The SPS-1500 is an immensely powerful AGM battery. Under eight inches square, this shock-resistant all-season battery is built to dole out up to 1,500 amps of current. Terminal hardware included.Specifications Max Amps: 1,500 Ah: 47 RC: 70 Weight: 33 lbs. Length: 7.79" Height: 6.69" Width: 6.54"
$219.99
-
Sundown Audio PSSB-8000 Amplified Bluetooth Powersports Soundbar Speaker
Integrated 300-watt amplifier 6 x 3” full range marine-grade poly cone speakers 2 x 1.25” SD mylar tweeters IPX67 rated (Submersible) Heavy duty extruded aluminum watertight housing LED-backlit control panel Visual notifications Audible power on/off notifications Built in dsp processor w/distortion limiter Bluetooth input Aux input & output (3.5mm) USB thumb drive input Waterproof wire loom connectors Universal l-bracket mounting system included Universal top or bottom mount clamp style brackets The 300-watt Sundown Audio PSSB-8000 soundbar blasts your music through six powerful marine-grade speakers and two crisp mylar tweeters. The rugged, IPX67-rated waterproof design and heavy-duty aluminum housing ensures it can withstand the toughest conditions. Mud, sand or water won’t stop the music!Stay connected and in control with the LED-backlit control panel, Bluetooth input, and multiple connectivity options, including 3.5mm AUX and USB inputs. Whether you're hitting the dunes, navigating rough trails, or cruising the waterways, the PSSB lets you focus on the thrill of the ride. It’s more than a soundbar; it’s your ticket to a lot more fun!
$799.99 $399.99
-
Sundown Audio Sundown Power Sports PSE-8 8" 250W Subwoofer
PSE-8Freq. range 20hz-150hzFS 43hzXmax 12mmD4250W RMSMounting depth 4.75”Cutout 7.5”
$179.99
-
Sundown Audio Sundown Power Sports SPS-950 35aH AGM Battery
950 max amps 12-volt AGM Shock resistant Waterproof All-season Zero maintenance M6 terminal hardware included You’ve got the loudest stereo on the trail, enough lighting to give all your friends a tan at once, and a winch so powerful it can pull a small tank out of a tar pit. One thing’s for sure: your factory battery was never designed to withstand that kind of stress. We have your answer.The SPS-950 is an immensely powerful AGM battery. Under eight inches square, this shock-resistant all-season battery is built to dole out up to 950 amps of current. Terminal hardware included.Specifications Max Amps 950A Ah: 35 RC: 50 Weight: 24.5 lbs. Length: 7.68" Height: 6.61" Width: 5.12"
$154.99
-
Sundown Audio Sundown Audio SAEv4-150.4 4-Channel Amplifier
450 x 2 @ 4 ohms RMS (Bridged) 225 x 4 @ 2 ohm RMS 150 x 4 @ 4 ohms RMS Hi-fidelity Class A/B design Variable 12dB low & high pass filters: 40Hz-5kHz Power and protection indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry The SAEv4 is engineered with high-fidelity Class A/B multi-channel architecture, providing an ideal balance between performance and affordability. Leveraging the latest half-bridge technology, these amplifiers deliver clean, powerful audio signals in a compact form factor. Featuring an all-new chassis and heatsink design with 33% more aluminum, this SAEv4 keeps your system cool even during intense listening sessions. The amp is packed with a variable subsonic, high pass and low pass filters, plus a 4-way protection circuit (thermal, voltage, speaker short, and DC offset). The variable crossover slope (LPF/HPF) and a high signal-to-noise ratio of 92dB further enhance audio quality, with an exceptionally low noise floor. With an input sensitivity of 6 volts and up to 900 watts of output, this amp is ready, willing, and more than able to drive your car audio system with a new level of precision and clarity.
$469.99
-
Down4Sound Down4Sound JP454 - 4000W RMS 4 Channel Amplifier
JP454 - 4-Channel 4000W RMS Amplifier Discover Unparalleled Audio Quality: Experience superior audio performance with the JP 454 4-channel amplifier, featuring a 10Hz-21KHz frequency response and a 94dB signal-to-noise ratio for an extraordinary listening experience. Impressive RMS Power Output: The JP 454 delivers 4000W RMS, offering 888W x 4 at 2 ohms, 454W x 4 at 4 ohms, and 1645W x 2 bridged at 4 ohms, making it the perfect choice for high-performance car audio setups. Clipping Indicators: The JP 454 is equipped with SIGNAL Clipping IN and CLIPPING OUT indicators, enabling you to optimize your music without any distortion. Tailor-Made & Adaptable Sound Options: Multiple Filters: Customize your audio experience with the JP 454 amplifier's High Pass Filters (20Hz-800Hz) and Low Pass Filters (50Hz-800Hz), complete with Multiply x1 and x10 options for each filter. Bandpass Capability: The amplifier also supports bandpass operation, allowing you to choose specific frequencies to amplify for a tailored sound experience. CH1/2 & Ch3/4: With CH1/2 & Ch3/4, the JP 454 provides versatile speaker options to run various speakers concurrently, ensuring top-notch sound quality. User-Friendly & Handy Features: Aluminum Remote Control: The JP 454 amplifier includes an aluminum remote control featuring Voltage and Temperature displays, as well as Thermal and Clipping indicators, providing total control over your audio experience. Working Voltage: The amplifier boasts a working voltage range of 9 to 15.5 volts, making it compatible with any vehicle. Damping Factor: With a damping factor of 170, the JP 454 ensures precise and controlled sound reproduction. JP 454 Specifications: Frequency Response: 10Hz – 21KHz Country of Origin: Korea Signal-to-Noise Ratio: 94dB Damping Factor: 170 Input Sensitivity: 6V – 0.2V CH1/2 & Ch3/4 High Pass Filter: 20Hz – 800Hz High Pass Multiply: x1, x10 (200Hz-8KHz) Low Pass Filter: 50Hz – 800Hz Low Pass Multiply: x1, x10 (500Hz-8KHz) Bandpass Capable SIGNAL Clipping IN & CLIPPING OUT Indicators Aluminum Remote Control with Voltage and Temperature Display, Thermal and Clipping Indicators Working Voltage: 9 to 15.5 Volts CLIP IN: Red CLIP OUT: 0.5% THD (Blue), 5% THD (Violet), 10% THD (Red) 4 - 0 gauge inputs RMS Power Ratings: 888W x 4 at 14.4V 2 Ohms 454W x 4 at 14.4V 4 Ohms 1645W RMS x 2 at 4 Ohms Dimensions: 15.74"L x 9.37"W x 2.71"H
$649.99
-
Down4Sound Down4Sound JP32.2 - 6000W RMS 2 Channel Amplifier
JP32.2 - 6000W RMS 2-Channel Amp Experience powerful, high-quality sound in your vehicle with the JP32.2 - 6000W RMS 2-Channel Amplifier. Featuring a high-speed MOSFET power supply and stable output for 1ohm stereo or 2ohm bridged, this car audio amp ensures your music is crystal clear and vibrant. Customize Your Audio with Advanced Features: The JP32.2 - 6000W RMS 2-Channel Amplifier boasts cutting-edge features that allow you to personalize your sound experience. Variable high-pass and low-pass filters, crossover multiply x10, and band-pass filter capabilities enable you to fine-tune your audio to suit your preferences. Plus, the adjustable bass boost and frequency let you enhance the bass to your desired level. Safe and Reliable Amplification: Designed with safety in mind, the JP32.2 - 6000W RMS 2-Channel Amplifier incorporates 4-way protection circuits to guard against overheating, voltage issues, speaker shorting, and DC damage. The high-purity copper printed circuit board ensures reliability and longevity, while the pair of 0-gauge power and ground terminals (2 power + 2 Grounds = 4 Total) make installation secure and straightforward. Additional Clipping and Distortion Features: The JP32.2 amplifier includes: CLIP IN: Red CLIP OUT: 0.5% THD (Blue), 5% THD (Violet), 10% THD (Red) Specifications: RMS Power 1 Ohm (3200W x 2) 2 Ohm (2000W x 2) 4 Ohm (1200W x 2) 2 Ohm Bridged (6000W x 1) 4 Ohm Bridged (4000W x 1) Frequency Response: 10 Hz - 23 kHz MADE IN KOREA High-Pass Filter: 20 (200) Hz - 800 (8K) Hz, x1, x10 Low-Pass Filter: 50 (500) Hz - 800 (8K) Hz, x1, x10 Bass Boost: 0 - 18dB Bass Frequency: 20Hz - 80Hz Input Sensitivity: 6V - 0.2V Signal to Noise Ratio: 80dB THD @ 4 Ohm: 0.1% Working Voltage: 9V - 15.5V Fuse Rating: 500A Dimensions (LxWxH): 19.68" x 9.37" x 2.71" 4 - 0 gauge inputs Included Wired Metal Bass Knob: Features Power, Clip, Protect, and Voltage indicators. Important Note: To support this amplifier's 6000W RMS output, a robust electrical system is required by law, not just a suggestion. Weak electrical systems are not covered under warranty.
$849.99
-
DC Audio DC Audio CS-1100X1 1100 Watt Mono Block Car Audio Class D Amplifier/Amp+Bass Knob
Amplifier Description The DC-CS 1000.1 is a compact series amplifier capable of making 1,100 watts. Its High power mono block. It has 4awg inputs and onboard clipping lights. It also comes with a bass knob and a clipping indicator. Designed to make more power in less space. Output Power (RMS) 4 ohm 500Wx1 @ 14.4 Volts 2 ohm 800Wx1 @ 14.4 Volts 1 ohm mono 1100x1 @ 14.4 Volts 1 ohm mono 1400x1 @ 16.0 Volts Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Wired Bass Knob remote control W/ Clip light • RCA Pass Thru • Onboard clip light AMP SPECS: DC Amp Model: CS 1100x1 Input Sensitivity 6V~0.2V Frequency Response 10Hz~250Hz 24dB / Octave Crossover YES Low Pass 35Hz ~ 250Hz Subsonic Filter 10Hz-50hz Bass Boost @45hz NO Phase Shift NO Remote Control Yes Clip Indicator Yes Signal to Noise Ratio dB92 Damping Factor 150< THD @ 4ohms Less than 0.1% Fuse Rating External 100 amp LED Status Lights Power/Protect/Clip Master/Slave NO Heatsink Length 8.27"/210mm Heatsink Width 4.72"/120mm Heatsink Height 1.96"/50.0mm
$349.99
-
DC Audio DC Audio A3 250.4K 1600 Watt 4-Channel Car Audio Amplifier/Amp 250x4 400x4
Amplifier Description The 250.4 competition series amplifier is a Monster Class D 4 Channel Amplifier Delivering 250 watts per channel @ 4 ohms / 400 watts x 4 @ 2 ohms per channel or 850 watts x2 @ 4 ohms bridged. It is not 1 ohm stable. Output Power (RMS) 4 ohm 250Wx4 @ 14.4 Volts 2 ohm 400Wx4 @ 14.4 Volts 4 ohm mono 850Wx2 @ 14.4 Volts 1700 watts total power Key Features Variable high pass filter with X10 option Variable low pass filter with X10 option Bandpass Filter Capable 8awg Speaker Connections 1/0 awg inputs Tiffany RCA Jacks Class D 8-16 Volts Operations Remote Control with Clipping LED’s Heatsink Clipping LED’s for Channels 1&2 / 3&4 AMP SPECS: DC Amp Model: 250.4 Input Sensitivity 6V~0.2V Working Voltage 8vdc-16vdc 12dB / Octave Crossover YES High Pass 20(200)Hz - 800(8K)Hz, x10 muliply Low Pass 50(500)Hz - 800(8K)Hz, x10 muliply Crossover Selector Switch HPF / FULL / LP / BP Remote Control Yes with Clipping Led Signal to Noise Ratio dB95 Damping Factor 130< THD @ 4ohms Less than 0.1% Fuse Rating External 200 amp LED Status Lights Power/Protect/Clipping Heatsink Length 13.78"/350mm Heatsink Width 9.38"/66mm Heatsink Heigth 2.35"/59.6mm
$899.99 $609.99
-
Sundown Audio Sundown Audio SAM-1500D Mono Powersports Amplifier
1,500 @ 1 ohm 1,130 @ 2 ohms 700 @ 4 ohms Variable 12dB low pass filter: 50Hz-250Hz Variable 18dB bass boost Power and protection indicators included Thermal, voltage, and speaker short protection circuitry Waterproof (IP67 rated) Sealed wire/signal bulkheads Gasketed audio control cover RCA line out Sundown SAMv.2 amplifiers are ideal for your boat, bike or UTV. Whether you play in the mud, sand, dirt or asphalt, this micro amplifier performs with all the power and acoustic control you need to bang out the bass! SAM amps are IP67 rated, certified to withstand full submersion when getting wild off-road, or when its time to clean up when the fun is done. Ready to go big? With the included line output, it’s easy to add additional amplifiers to the system. Time to ride!
$399.99
-
Sundown Audio Sundown Audio SAM-150.2 2-Channel Bluetooth Powersports Amplifier
540 x 1 @ 4 ohms 270 x 2 @ 2 ohms 150 x 2 @ 4 ohms Variable 12dB filter: 50Hz-500Hz Power and protection indicators included Thermal, voltage, and speaker short protection circuitry Waterproof (IP67 rated) Bluetooth receiver built-in Sealed wire/signal bulkheads Gasketed audio control cover RCA line out Our SAMv.2 amplifiers are ideal for your boat, bike or UTV. On the trail or on the road, this micro amplifier fits in tight spaces, but don’t let the size fool you - they pack some big power. SAM-series amps are rated IP67, certified to withstand full submersion when getting wild off-road, or when its time to clean up when the fun is done. Both of our multi-channel amps have built-in Bluetooth, so a source unit is not needed! Just sync to your phone and enjoy! Ready to go big? With the included line output, it’s easy to add additional amplifiers to the system.
$299.99
-
Incriminator Audio Incriminator Audio IX17.5 5-Channel 2000w Amplifier
Incriminator Audio IX17.5 Please Note- This amplifier ships directly from Incriminator Audio, please allow 1-2 day processing. · Features Full Range Class Digital Amplifier Dual MOS-FET Pulse Width Modulation Power Supply 2 Ohm Stable Stereo / 4 Ohm Mono for CH 1-4 1 Ohm Stable for CH5 12dB/octave - Variable State Subsonic Filter 12dB/octave - Variable State Low / High Pass Filter Heavy Duty Copper Layer Double Sided Epoxy PCB Mirror Technology (Channel 1/2, 3/4 & 5) with Individual Clipping Indicators Multi-Layer Protection Circuit (Thermal, Voltage, Speaker Short, DC) Wire Remote Control with Clipping Indicator Ships directly from Incriminator Audio · Specifications Rated Power ( 14.4V at 1% THD ) RMS Power - 4 Ohm Mono : 420W x 2CH RMS Power - 1 Ohm Mono : 1200W x 1 for CH5 Only RMS Power - 2 Ohm Stereo : 210W x 4CH + 850W x 1CH RMS Power - 4 Ohm Stereo : 125W x 4CH + 500W x 1CH Crossover Frequency ( 12dB/Oct. ) : 20Hz - 5000Hz Subsonic Filter ( 12dB/Oct. ) : 10Hz - 50Hz Low Pass Filter ( 12dB/Oct. ) : 50Hz - 5000Hz Bass Boost ( 45Hz ) : 0dB - 9dB Frequency Response ( +/-1dB ) : 10Hz - 28,000Hz for CH1-4, 100Hz - 500Hz for CH5 Channel Separation : 55dB Input Sensitivity ( Volt +/- 5% ) : 6.0V - 0.2V Signal / Noise Ratio : 90dB Dampening Factor ( 4 Ohm ) : 100 + Operation Mode : Mirror CH1/2, CH3/4, CH5 Power Efficiency ( 4 Ohm ) : 94% Fuse Rating ( 14.4V ) : 150A Power Input Connection : 0 Gauge Operation Voltage : 8.5V - 16.0V Speaker Output Connection : 8 Gauge Dimensions ( Inches ) : 7.48 W x 2.24 H x 15.74 L Dimensions ( Millimeters ) : 190 W x 57 H x 400 L
$649.00
-
Deaf Bonce Deaf Bonce MLA-1500 Monoblock 1500 Watt Amplifier
Specifications Model MLA-1500 Class D Number of the channels 1 Frequency response 10 - 180 Hz 1 Ohm RMS Power (14.4 V) 1480 W 2 Ohm RMS Power (14.4 V) 920 W 4 Ohm RMS Power (14.4 V) 540 W Minimum permissible load on the channel 1 Ohm Input SPL 0.2 - 6 V Low pass filter 40 - 180 Hz Crossover 12 dB/Oct Subsonic filter 0 - 50 Hz Input terminal 4 Ga Output terminal 8 Ga Working voltage 10 - 15 V Signal-to-noise ratio ≥ 99 dB Size (WxLxH) 14.76 x 8.50 x 1.96 inch
$239.90
-
Kicker Kicker 48KXMA400.2 2-Channel Marine Amplifier
KXMA400.2 Marine Amplifier KickEQ™ delivers as much as an 6dB of extra bump with a simple turn of the knob. A powerful 24dB crossover is also included, letting you quickly tune your system to perfection. A full-range RCA output allows you to easily add another amplifier without running new signal cable to your KICKER KMC Media Center. Class D Amplifier Gain Control With "Gain Match" LED Indicator FIT2™ (Fail-safe Integration Technology) Circuitry Variable 24dB Crossover DSP-Controlled Preamp KickEQ™ 6dB Variable Bass Boost ABYC/NMMA-Compliant Power Terminals Conformal-Coated Circuit Board to resist moisture Easy Access to Settings behind Gasket-Sealed Cover Panel Black Anodized Aluminum Chassis Top-Mounted, Teal LED Light Pipe Stainless-Steel Mounting Hardware Included Want setup help? Go to KICKER U for a free woofer-and-amp configuration app! This KXMA amplifier delivers as much as 200 watts into two full-range channels, or 400 watts into one bridged channel. See below for more details. Product highlights: 2-channel marine amplifier 100 watts RMS x 2 at 4 ohms 200 watts RMS x 2 at 2 ohms 400 watts RMS x 1 bridged at 4 ohms (4-ohm stable in bridged mode) CEA-2006 compliant Class D amp technology Gain knob also functions as clip light Variable high-pass filter (10-500 Hz, 24 dB/octave) Variable low-pass filter (40-500 Hz, 24 dB/octave) with 10x switch Bandpass engages both high- and low-pass filters Variable bass boost (0-6 dB at 40 Hz) Other Features: Weather-resistant conformal-coated circuit boards Front-mounted controls protected behind gasket-sealed fold-down door Fail-Safe Integration Technology eliminates noise from your vehicle's electrical system Preamp and speaker-level inputs (speaker wire to RCA adapter required for speaker-level input)) Preamp outputs Wiring and hardware not included with amplifier 8-gauge power and ground leads and a 60-amp fuse recommended for multiple amplifiers, an additional 60-amp in-line fuse between the distribution block and this amplifier is recommended Dimensions: 9-9/16"W x 2-3/16"H x 8-5/16"D
$409.99 $379.99
-
Deaf Bonce Deaf Bonce Machete MMA-2200.1D 300x2 Car Audio 2-Channel Class D Amplifier/Amp
Specifications Model MMA-2200D Class D Number of the channels 2 Frequency response 10-22000 Hz 2 Ohm RMS Power (14.4 V) 300 W x 2 4 Ohm RMS Power (14.4 V) 200 W x 2 4 Ohm RMS Power (Bridge) 600 W x 1 Minimum permissible load on the channel 0 Ohm Input SPL 0.2 - 6 V Low pass filter 50-500 Hz High pass filter 50-500 Hz Crossover 12 dB/Oct Bass frequency adjustment 45 Hz Damping factor ≥ 150 Working voltage 9 - 15 V Signal-to-noise ratio ≥ 90 dB Size (WxLxH) 5.20 x 9.25 x 1.85 inch Gross weight 4.67 lb (2.12 kg)
$249.90
-
Incriminator Audio Incriminator Audio I501 500 Watt Mono 1-Channel Car Audio Amplifier/Amp
Features Digital Class-D Linkable Mono Block Amplifier MOS-FET Pulse Width Modulation Power Supply 1 Ohm Stable Topology / 16 Volt Stable Heavy Duty 2 Oz Copper Layer Double Sided Epoxy PCB Extremely High Precision Electrical Components For Reliability Proprietary Custom Tooled Heatsink Black Molded Oversized 4 AWG Power and Ground Inputs Advanced Strapping / Linking Multi-Layer Bullet Proof Protection Circuit Remote Bass Specifications Rated Power ( 14.4V at 1% THD ) RMS Power - 2 Ohm Linked : 1000W RMS Power - 1 Ohm Mono : 500W RMS Power - 2 Ohm Mono : 375W RMS Power - 4 Ohm Mono : 250W Low Pass Filter ( 24dB/Oct. ) : 35Hz - 250Hz Subsonic Filter ( 24dB/Oct. ) : 10Hz - 50Hz Frequency Response ( +/-3dB ) : 15Hz - 250Hz Bass Boost ( 45Hz ) : 0 – 9dB Input Sensitivity ( Volt +/- 5% ) : 6.0V - 0.2V Signal / Noise Ratio : 95dB Dampening Factor ( 1 Ohm ) : >200 Operation Mode : Master/Slave Power Efficiency ( 4 Ohm ) : 85% Fuse Rating ( 14.4V ) : 50A Fuse Rating ( 14.4V Linked ) : 100A Power Input Connection : 4 Gauge Operation Voltage : 10V - 16.0V Speaker Output Connection : 8 Gauge Dimensions ( Inches ) : 6.85 W x 2.36 H x 10.24 L Dimensions ( Millimeters ) : 174 W x 60 H x 260 L
$219.00
-
DC Audio DC Audio A3 7.5K 7500 Watt Mono Block Car Audio Class D Amplifier/Amp+Bass Knob
The 7.5kw competition series amplifier is a 7,500 watt mono block. It is capable of running up to 18 volts for up to 9,200 watts. It is a linkable amp and designed to run at 1 ohm per amp or 2 ohms when strapped. It comes with a bass knob and a clipping indicator. For power inputs it will accept dual 0 awg for power and dual 0 awg for ground. Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Variable bass boost • Wired remote control • Dual 0 awg power and ground inputs (both must be used) We recommend for installation • 1 upgraded battery under the hood • 3 extra 800ci battery in the rear • Minimum of two 0 awg ran from the front battery to the rear batterys • Both 0 awg power and ground inputs on amp must have 0 awg ran to them for a total of 4 runs into the amp • 2 upgraded aftermarket alternators • Dash mounted voltage meter Specifications Features Voltage 7.5kw Output Power (RMS) 4 ohm 14.4V 2,000W x 1 2 ohm 4,400W x 1 1 ohm 7,500W x 1 1 ohm 16V 8,600W x 1 1 ohm 18V 9,200W x 1 Input Sensitivity 6V~0.2V Low Pass Filter Switchable ( @ 24 dB Slope) Variable Hz 35~250 Subsonic Filter Switchable ( @ 24dB slope ) Variable Hz 10~50 Bass Boost Variable dB 0-9dB Frequency Response Hz 15-270 Signal to Noise Ratio dB 100 Damping factor 150< Efficiency @ 4ohm % Over 90% THD @ 4ohms Less than 0.1% Fuse Rating 750 Amps Linked Fuse Rating 1500 Amps Indicator Power Yes Protection Yes Clip No Speaker & Power terminal Mold Type Yes Power Gauge 0Ga x 2 Heatsink Length inch/mm 32.28"/820mm Heatsink Width inch/mm 9.38"/66mm Heatsink Height inch/mm 2.35"/59.6mm Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Variable bass boost • Wired remote control • Dual 0 awg power and ground inputs (both must be used)
$2,326.50 $1,899.99
-
Kicker Kicker CXA1200.1T 1200W Monoblock Amplifier 46CXA1200.1T
Specifications Performance RMS Power Output (Watts x Channels) 600 x 1 Peak Power Output (Watts x Channels) 2400 x 1 Power at 2 Ohms (Watts x Channels) 1200 x 1 Bridged Power (Watts x Channels) N/A Minimum Impedance Bridged N/A Minimum Impedance Unbridged 1 Minimum Impedance 1 Best Frequency Response 25-200 Hz THD at Rated RMS Power 1% Signal to Noise Ratio 70 dB Input Voltage 14.4v Features Amplifier Class D Low-Pass Crossover Frequency 50-200 Hz Low-Pass Slope (dB/octave) 12 dB/octave High-Pass Crossover Frequency N/A High-Pass Slope (dB/octave) N/A Bass Boost 0-6 dB Bass Boost Frequency 40 Hz Fan Cooled No Fuse Rating 100 Speaker Level Inputs Yes Preamp Outputs 1 pair Width (inches) 12-5/8 Height (inches) 2-3/8 Depth (inches) 6-3/4 Parts Warranty 2 Years Labor Warranty 2 Years
$399.99
-
Sundown Audio Sundown Audio SAEv4-100.4 4-Channel Amplifier
250 x 2 @ 4 ohms RMS (Bridged) 125 x 4 @ 2 ohm RMS 100 x 4 @ 4 ohms RMS Hi-fidelity Class A/B design Variable 12dB low & high pass filters: 40Hz-5kHz Power and protection indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry The SAEv4 is engineered with high-fidelity Class A/B multi-channel architecture, providing an ideal balance between performance and affordability. Leveraging the latest half-bridge technology, these amplifiers deliver clean, powerful audio signals in a compact form factor. Featuring an all-new chassis and heatsink design with 33% more aluminum, this SAEv4 keeps your system cool even during intense listening sessions. The amp is packed with a variable subsonic, high pass and low pass filters, plus a 4-way protection circuit (thermal, voltage, speaker short, and DC offset). With an input sensitivity of 6V max and RMS power output of 125W x 4 at 2 ohms and 100W x 4 at 4 ohms, the SAEv4-100.4 is designed to drive your car audio system with precision and clarity. The variable crossover slope (LPF/HPF) and a high signal-to-noise ratio of 92dB further enhance audio quality, with an exceptionally low noise floor.
$349.99
-
Sundown Audio Sundown Audio SFB-200.4 4-Channel Amplifier
200 x 4 @ 1 ohm RMS 125 x 4 @ 2 ohms RMS 75 x 4 @ 4 ohms RMS 4-channel full-range amplifier Variable 12dB low pass filter: 50Hz – 6kHz Variable 12dB high pass filter: 15Hz – 6kHz Variable 12dB Bass Boost @ 50Hz Power, protection & clipping indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Optional wired remote control with clipping indicator Introducing the Sundown Full Bridge line of amplifiers! The “Brazilian Style” SFB packs a powerful punch in a compact size, stable down to 1 ohm per channel. Use the SFB to wire several speakers together on every channel - an ideal amp for a PA mid/high speaker array, a large marine system, or your favorite set of separates. If you are looking for raw power on a budget – look no further!
$289.99
-
Sundown Audio Sundown Audio SALT-500.4 4-Channel Amplifier
1,400 x 2 @ 4 ohms RMS 700 x 4 @ 2 ohms RMS 500 x 4 @ 4 ohms RMS 4-channel full-range amplifier: 10Hz – 25 kHz Variable 12dB subsonic filter: 10HZ - 500HZ Variable 12dB high & low pass filters: 50HZ - 500HZ X1/X10 crossover multiplier Power, clipping & protection indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Optional wired remote control displays voltage, temperature, and clipping display Producing optimum power at realistic voltages (the 12s, rather than needing 14+ volts), the SALT – Sundown Audio Low-Voltage Technology – is Sundown’s answer! SALT amplifiers represent the pinnacle of Korean Class-D amplifier technology. Whether you are a world-class SPL competitor or a hardcore sound quality fan, the SALT series will be your go-to choice to bring your speakers to life! It's got easy-to-use 12dB subsonic and high/low pass filters to customize your sound exactly as you like it. Plus, it has power, clipping, and protection indicators to keep everything running smoothly. The optional remote control lets you see voltage, temperature, and clipping with ease. With SALT amps you get all the control you’d ever need, incredible dynamics and the kind of power only Sundown can deliver!
$999.99
-
Taramps Taramps HD800 HD Compact 800 Watt 1-Ohm Mono Class-D Car Audio Amplifier/Amp
The launch of Taramp's comes down to a sophisticated amplifier with modern design, able to run a complete sound system with top quality sound and high definition, giving the user the perception of minute details present in the music.The HD 800 has 1 crossover that provides the freedom to work independently adjustments High Pass (HPF) ranging from 10 to 50 Hz and low pass (LPF) with a range of 50 Hz to 22 KHz, providing more quality acute and high frequencies, and keeps the Bass Boost function, highlighting the frequency of severe sub 0-10 dB at 50 KHz. The new model amplifier Taramp's can be found in versions 1 ohm and 2 ohms, both with 1 channel LED monitor with clip indicators and distortion, and security systems that act as output protection (short) and low and high strain.Using digital technology (Class D) and all the features of the HD line, while running the sound system, the HD 800 model demonstrates its efficiency with less heat, taking much of the energy to achieve superior performance and sonic performance. Number of Channels: 1Power 13.8 VDC - 2 ohm: 959W RMSPower 13.8 VDC - 4 ohm: 547W RMSPower 13.8 VDC - 8 ohm: 297W RMSPower 12.6 VDC - 2 ohm: 800W RMSPower 12.6 VDC - 4 ohm: 456W RMSPower 12.6 VDC - 8 ohm: 248W RMSInput Sensitivity: 250mV @ (-9.78 dBm)Total Harmonic Distortion ( THD): 0.3%Frequency Response: 10Hz to 15KHzCrossover: -HPF (High Pass Filter): 10Hz to 50Hz (-12dB / 8th) VariableLPF (Low Pass Filter): 50Hz to 15KHz (-12dB / 8th) VariableBass Boost:0-10 dB (50Hz)Input Impedance: 18K OHMSSystem Protection: Short on Output Voltage / High Power / LowVoltage Low Power: 10.5 VDCVoltage Maximum Supply: 16VDCConsumption at Rest: 1.10 AmpMaximal Musical @ 12.6 VDC: 38.5 AmpMaximum Consumption in sinusoidal signal (1kHz) @ 12.6 VDC: 77 AmpDimensions (WxHxD): 226 X 55 X 187mmWeight: 1.46 kg
$299.95