Resilient Sounds
-
RESILIENT SOUNDS GOLD V2 12" DUAL 2 OHM (D2) SUBWOOFER
Optimized Low-Impedance Bass Power The Resilient Sounds GOLD V2 12" D2 is the premier choice for maximizing output when paired with 1 Ohm-stable amplifiers. This 12-inch powerhouse maintains the conservative 1500W RMS rating and features the same high-performance components: a 3-inch 4-layer voice coil, a 220mm triple-stack motor, and a huge 31mm XMAX. The Dual 2 Ohm voice coil configuration is ideal for achieving a final load of 1 Ohm (single amplifier to multiple subs) or 4 Ohms (single subwoofer), making it a high-efficiency solution for competitive and daily driven systems alike. TECHNICAL SPECIFICATIONS Specification Detail Model Gold V2 12" Nominal Impedance Dual 2 Ohm (D2) RMS Power Handling (Conservative) 1500 Watts Maximum Excursion (XMAX) 31MM Voice Coil 3-inch 4 Layer (25% Longer than V1) Motor Structure Triple Stack 220mm Motor with Venting (15% Larger than V1), Engraved Bottom Plate, Molded Motor Boot Surround / Spider NEW High Roll Tooled Surround, 10" Spider Pack with Dual Sewn Leads Frame/Basket Cast Aluminum Frame Terminals 4 Ga Push Terminals Gasket Aluminum Gasket Shorting Ring Aluminum Available Sizes 10", 12", 15", and 18" RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 1.75 - 2.75 CU FT Tuning Frequency 29 - 33 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 9.125 INCHES Cutout Diameter 11.175 INCHES Displacement 0.20 CU FT Outside Diameter 12 5/32 INCHES
$449.99
-
RESILIENT SOUNDS GOLD V2 10" DUAL 2 OHM (D2) SUBWOOFER
Low Impedance, High Impact 10-Inch Bass The Resilient Sounds GOLD V2 10" D2 is engineered for high-efficiency systems where a low final impedance is critical. With a conservative 1500W RMS rating and a monumental 31mm of XMAX, this 10-inch subwoofer delivers uncompromising bass performance. Its core features—including the triple-stacked 220mm motor and the 3-inch 4-layer voice coil—ensure it handles extreme power reliably. The Dual 2 Ohm voice coil is optimized for achieving a 1 Ohm final load when wired in parallel (or 4 Ohms in series), making it the perfect match for high-current, 1 Ohm-stable mono amplifiers. TECHNICAL SPECIFICATIONS Specification Detail Model Gold V2 10" Nominal Impedance Dual 2 Ohm (D2) RMS Power Handling (Conservative) 1500 Watts Maximum Excursion (XMAX) 31MM Voice Coil 3-inch 4 Layer (25% Longer than V1) Motor Structure Triple Stack 220mm Motor with Venting (15% Larger than V1), Engraved Bottom Plate, Molded Motor Boot, Aluminum Shorting Ring Surround / Spider NEW High Roll Tooled Surround, 8.5" Spider Pack with Dual Sewn Leads Frame/Basket Cast Aluminum Frame Terminals 4 Ga Push Terminals Gasket Aluminum Gasket Available Sizes 10", 12", 15", and 18" RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 1.25 - 2 CU FT Tuning Frequency 28 - 32 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 8.25 INCHES Cutout Diameter 9 7/16 INCHES Displacement 0.17 CU FT Outside Diameter 10 23/32 INCHES
$429.99
-
RESILIENT SOUNDS PLATINUM V2 15" DUAL 2 OHM (D2) SUBWOOFER
Monumental Power and Excursion in a 15-Inch Chassis The Resilient Sounds PLATINUM V2 15" D2 is engineered to deliver competition-level output and fidelity, serving as a true powerhouse for any advanced audio system. Conservatively rated at a massive 2,500W RMS (5,000 Watts Peak), this 15-inch subwoofer boasts a 13% larger motor assembly and a 20% longer 3-inch 8-layer voice coil, which dramatically increases thermal handling and motor force (BL²/Re is up to 50% higher than the V1). The Dual 2 Ohm configuration provides flexible wiring options for 1 Ohm or 4 Ohm final loads. Featuring a huge 35mm XMAX, a 10-inch spider pack, and a stiff carbon fiber cone, the Platinum V2 15" is ready to produce deep, high-impact bass that will satisfy the most demanding audiophiles. TECHNICAL SPECIFICATIONS Specification Detail Model Platinum 15 V2 Nominal Impedance Dual 2 Ohm (D2) RMS Power Handling (Conservative) 2,500 Watts Peak Power Handling 5,000 Watts Maximum Excursion (XMAX) 35MM Voice Coil 3-inch 8 Layer (20% Longer than V1) Motor Structure 13% Larger Motor, XL Triple Stacked Cone / Dust Cap Carbon Fiber Surround New High Roll Tooled Surround Spider / Leads 10" Spider Pack with Insulated Dual Leads Frame/Basket Cast Aluminum Frame RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 2.5 - 3.5 CU FT Tuning Frequency 28 - 33 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 11.25 INCHES Cutout Diameter 14.2363 INCHES Displacement 0.28 CUBIC FT
$699.99
-
RESILIENT SOUNDS ENTRY V2 12" DUAL 4 OHM SUBWOOFER
Premium Entry-Level Power and Authority The Resilient Sounds Entry V2 12" represents the peak of the new entry-level lineup, designed to maximize performance with a substantial 750W RMS power rating. This 12-inch subwoofer features significant enhancements in its motor and soft parts, including a robust 3-inch voice coil. This design yields massive increases in motor force (up to 43% in BL factor) over previous models, ensuring powerful and controlled bass. The Dual 4 Ohm impedance allows for wiring to a 2 Ohm or 8 Ohm final load, offering ideal flexibility for high-current mono amplifiers. Built to handle abuse, the RS V2 12" provides lasting, daily resilient bass performance. TECHNICAL SPECIFICATIONS Specification Detail Model RS 12 V2 RMS Power Handling 750 Watts Voice Coil 3" Nominal Impedance Dual 4 Ohm THIELE-SMALL PARAMETERS Sensitivity (SPL) 85.7 dB Resonance Frequency (Fs) 31.140 Hz BL Factor (BL) 28.793 DC Resistance (RE) 7.6 Ohms Mechanical Q (QMS) 3.023 Electrical Q (QES) 0.483 Total Q (QTS) 0.416 Compliance (CMS) 0.097 uM/N Moving Mass (MMS) 269.274 g Equivalent Volume (VAS) 38.831 L RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 1.5 - 2.25 CU FT Tuning Frequency 28 - 32 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 6.75 INCHES Cutout Diameter 11.14 INCHES
$239.99
-
RESILIENT SOUNDS ENTRY V2 10" DUAL 4 OHM SUBWOOFER
New and Improved Entry-Level Performance The Resilient Sounds Entry V2 10" is part of the new and improved entry-level model lineup, boasting significant upgrades in its soft parts and motor design. This 10-inch subwoofer is rated at a solid 600W RMS and features a 2.5-inch voice coil, contributing to notable performance increases, including a large jump in BL factor and motor strength. It is engineered for a lasting daily resilient performance with a focus on clean signal handling, making it an excellent balance of power, sound quality, and value. With a nominal impedance of Dual 4 Ohm, it can be wired for a final 2 Ohm or 8 Ohm load. TECHNICAL SPECIFICATIONS Specification Detail Model RS 10 V2 RMS Power Handling 600 Watts Voice Coil 2.5" Nominal Impedance Dual 4 Ohm THIELE-SMALL PARAMETERS Sensitivity (SPL) 84.9 dB Resonance Frequency (Fs) 36.940 Hz BL Factor (BL) 27.336 DC Resistance (RE) 8 Ohms Mechanical Q (QMS) 2.736 Electrical Q (QES) 0.426 Total Q (QTS) 0.368 Compliance (CMS) 0.17 uM/N Moving Mass (MMS) 171.257 g Equivalent Volume (VAS) 16.767 L RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 1.0 - 1.6 CU FT Tuning Frequency 32 - 36 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 5.75 INCHES Cutout Diameter 9.17 INCHES
$189.99
-
RESILIENT SOUNDS ENTRY V2 8" DUAL 4 OHM SUBWOOFER
Impressive Performance in a Compact 8-Inch Design The Resilient Sounds Entry V2 8" is a versatile and high-performing entry-level subwoofer designed to deliver outstanding low-end response while maintaining a compact form factor. This 8-inch woofer is conservatively rated at 500W RMS and features a double-stacked, FEA-optimized motor and a 2-inch voice coil. Its sturdy construction and optimized design ensure reliable performance and a remarkably resilient daily listening experience. With a nominal impedance of Dual 4 Ohm, it offers system flexibility, allowing for a final 2 Ohm or 8 Ohm load. TECHNICAL SPECIFICATIONS Specification Detail Model RS 8 V2 RMS Power Handling 500 Watts Voice Coil 2" Nominal Impedance Dual 4 Ohm THIELE-SMALL PARAMETERS Sensitivity (SPL) 80.9 dB Resonance Frequency (Fs) 35.728 Hz BL Factor (BL) 21.323 DC Resistance (RE) 8 Ohms Mechanical Q (QMS) 2.674 Electrical Q (QES) 0.488 Total Q (QTS) 0.413 Compliance (CMS) 0.16 uM/N Moving Mass (MMS) 123.556 g Equivalent Volume (VAS) 8.547 L RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 0.5 - 0.75 CU FT Tuning Frequency 30 - 34 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 5 INCHES Cutout Diameter 7.25 INCHES
$149.99
-
Basshead Supply Resilient Sounds Single 10" Gold Ported Enclosure
Custom built enclosure specifically for the Resilient Sounds Gold 10" subwoofer. Specifications: 1.25 cubic feet net enclosure 34.0 hz tuning 18.05 sq inches of port 11.5" x 1.57" port dimensions 9.3" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 13.0" tall 23.5" wide 14.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Resilient Sounds Gold 10" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$441.99
-
Basshead Supply Resilient Sounds Single 12" Gold Ported Enclosure
Custom built enclosure specifically for the Resilient Sounds Gold 12" subwoofer. Specifications: 2.0 cubic feet net enclosure 33.0 hz tuning 28.69 sq inches of port 13.5" x 2.125" port dimensions 11.2" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 15.0" tall 24.625" wide 17.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Resilient Sounds Gold 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$535.99
-
Basshead Supply Resilient Sounds Single 8" Gold Ported Enclosure
Custom built enclosure specifically for the Resilient Sounds Gold 8" subwoofer. Specifications: 1.0 cubic feet net enclosure 35.0 hz tuning 14.4 sq inches of port 10.0" x 1.44" port dimensions 7.3" subwoofer cut out 3/4" (18mm) plywood construction 13 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 11.5" tall 23.0" wide 13.25" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Resilient Sounds Gold 8" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our strong baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 1000W RMS (dual enclosures - 2000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$356.99
-
Basshead Supply Resilient Sounds Single 10" Gold v2 Ported Enclosure
Custom built enclosure specifically for the Resilient Sounds Gold v2 10" subwoofer. Specifications: 1.25 cubic feet net enclosure 34.0 hz tuning 18.05 sq inches of port 11.5" x 1.57" port dimensions 9.4375" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 13.0" tall 23.375" wide 14.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Resilient Sounds Gold v2 10" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$441.99
-
Basshead Supply Resilient Sounds Single 12" Gold v2 Ported Enclosure
Custom built enclosure specifically for the Resilient Sounds Gold v2 12" subwoofer. Specifications: 2.0 cubic feet net enclosure 33.0 hz tuning 28.69 sq inches of port 13.5" x 2.125" port dimensions 11.175" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 15.0" tall 24.625" wide 17.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Resilient Sounds Gold v2 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$535.99
-
Basshead Supply Resilient Sounds Single 15" Gold v2 Ported Enclosure
Custom built enclosure specifically for the Resilient Sounds Gold v2 15" subwoofer. Specifications: 3.5 cubic feet net enclosure 32.0 hz tuning 50.38 sq inches of port 15.5" x 3.25" port dimensions 14.2363" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 17.0" tall 29.875" wide 20.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Resilient Sounds Gold v2 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$708.99
-
Basshead Supply Resilient Sounds Single 12" Platinum Ported Enclosure
Custom built enclosure specifically for the Resilient Sounds Platinum 12" subwoofer. Specifications: 2.25 cubic feet net enclosure 32.0 hz tuning 32.2 sq inches of port 14.0" x 2.3" port dimensions 11.2" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 16.0" tall 24.0" wide 19.75" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Resilient Sounds Platinum 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$629.99
-
Basshead Supply Resilient Sounds Single 15" Platinum Ported Enclosure
Custom built enclosure specifically for the Resilient Sounds Platinum 15" subwoofer. Specifications: 3.5 cubic feet net enclosure 32.0 hz tuning 50.4 sq inches of port 16.0" x 3.15" port dimensions 13.7" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 18.0" tall 30.125" wide 20.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Resilient Sounds Platinum 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$787.99
-
Basshead Supply Resilient Sounds Single 12" Platinum v2 Ported Enclosure
Custom built enclosure specifically for the Resilient Sounds Platinum v2 12" subwoofer. Specifications: 2.25 cubic feet net enclosure 32.0 hz tuning 32.2 sq inches of port 14.0" x 2.3" port dimensions 11.175" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 16.0" tall 24.25" wide 19.75" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Resilient Sounds Platinum v2 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$629.99
-
Basshead Supply Resilient Sounds Single 15" Gold Ported Enclosure
Custom built enclosure specifically for the Resilient Sounds Gold 15" subwoofer. Specifications: 3.25 cubic feet net enclosure 32.0 hz tuning 46.5 sq inches of port 15.5" x 3.0" port dimensions 13.7" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 17.0" tall 27.875" wide 20.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Resilient Sounds Gold 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$685.99
-
Basshead Supply Resilient Sounds Single 10" Platinum v2 Ported Enclosure
Custom built enclosure specifically for the Resilient Sounds Platinum v2 10" subwoofer. Specifications: 1.5 cubic feet net enclosure 32.0 hz tuning 21.72 sq inches of port 12.0" x 1.81" port dimensions 9.4375" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 14.0" tall 23.75" wide 17.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Resilient Sounds Platinum v2 10" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$524.99
-
Basshead Supply Resilient Sounds Single 15" Platinum v2 Ported Enclosure
Custom built enclosure specifically for the Resilient Sounds Platinum v2 15" subwoofer. Specifications: 3.5 cubic feet net enclosure 32.0 hz tuning 50.4 sq inches of port 16.0" x 3.15" port dimensions 14.2363" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 18.0" tall 30.375" wide 20.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Resilient Sounds Platinum v2 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$787.99
-
Basshead Supply Resilient Sounds Dual 10" Gold Ported Enclosure
Custom built enclosure specifically for the Resilient Sounds Gold 10" subwoofer. Specifications: 2.5 cubic feet net enclosure 34.0 hz tuning 35.94 sq inches of port 11.5" x 3.125" port dimensions 9.3" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 3/4" (18mm) center baffle brace 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 13.0" tall 29.75" wide 20.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Resilient Sounds Gold 10" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$599.99
-
Basshead Supply Resilient Sounds Dual 12" Gold Ported Enclosure
Custom built enclosure specifically for the Resilient Sounds Gold 12" subwoofer. Specifications: 4.0 cubic feet net enclosure 33.0 hz tuning 57.38 sq inches of port 13.5" x 4.25" port dimensions 11.2" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 3/4" (18mm) center baffle brace 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 15.0" tall 34.875" wide 22.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Resilient Sounds Gold 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$755.99
-
Basshead Supply Resilient Sounds Dual 15" Gold Ported Enclosure
Custom built enclosure specifically for the Resilient Sounds Gold 15" subwoofer. Specifications: 6.5 cubic feet net enclosure 32.0 hz tuning 93.66 sq inches of port 18.5" x 5.0625" port dimensions 13.7" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 3/4" (18mm) center baffle brace 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 22.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Resilient Sounds Gold 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,015.99
-
Basshead Supply Resilient Sounds Dual 8" Gold Ported Enclosure
Custom built enclosure specifically for the Resilient Sounds Gold 8" subwoofer. Specifications: 2.0 cubic feet net enclosure 34.0 hz tuning 26.45 sq inches of port 11.5" x 2.3" port dimensions 7.3" subwoofer cut out 3/4" (18mm) plywood construction 3/4" (18mm) center baffle brace 13 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 13.0" tall 26.375" wide 18.25" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Resilient Sounds Gold 8" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our strong baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 1000W RMS (dual enclosures - 2000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$503.99
-
Basshead Supply Resilient Sounds Dual 10" Gold v2 Ported Enclosure
Custom built enclosure specifically for the Resilient Sounds Gold v2 10" subwoofer. Specifications: 2.5 cubic feet net enclosure 34.0 hz tuning 35.94 sq inches of port 11.5" x 3.125" port dimensions 9.4375" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 3/4" (18mm) center baffle brace 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 13.0" tall 29.625" wide 20.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Resilient Sounds Gold v2 10" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$599.99
-
Basshead Supply Resilient Sounds Dual 12" Gold v2 Ported Enclosure
Custom built enclosure specifically for the Resilient Sounds Gold v2 12" subwoofer. Specifications: 4.0 cubic feet net enclosure 33.0 hz tuning 57.38 sq inches of port 13.5" x 4.25" port dimensions 11.175" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 3/4" (18mm) center baffle brace 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 15.0" tall 34.875" wide 22.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Resilient Sounds Gold v2 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$755.99
