Kicker Amps

CX1800.1 Mono Amplifier CX-Series Amps reach massive power levels thanks to an optimized circuit layout and the highest-grade internal components. Highly efficient heat sinks keep the amp cool with a sophisticated new look. Mono amps offer an optional remote level control to adjust your bass right from the dash. Power Station The CXA1800.1 Mono Amplifier is built for big bass in a sleek, yet affordable package. Using a Class-D power plant and FIT+™ (Fail-safe Integration Technology-PLUS) for superior dependability, this amp features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump with a simple turn of the optional CXARC Remote Bass Controller. CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time! A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. Use the full range outputs to expand your system with other bass amps, or add a full range amp to complete your system. This CX-Series Amplifier delivers as much as 1,800 watts into one bass channel. See below for more details.   Efficient Class-D amplifier Three-second turn-on/off delay to eliminate unwanted interference Variable 12dB crossovers provides control to dial in perfect sound KickEQ™ 6dB variable bass boost for those additional low frequencies 24dB subsonic filter for protection from potentially damaging frequencies FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio Accepts up to 40-volt input signal Small footprint for easier installation Compatible with CXARC Remote Bass Control Vertical mounting hardware included for another unique look Specifications MODEL CXA1800.1 Power (watts/ch) 4 Ohm 900x1 Power (watts/ch) 2 Ohm 1800x1 Power (watts/ch) 1 Ohm 1800x1 +/-10% CXRC Remote Bass Capable (sold sep.) yes Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) 14-3/8, 36.4 Frequency Response (Hz): 25-200Hz Input Sensitivity: 250mV-10V (Low Level)1V-40V (High Level) Signal-to-Noise Ratio: 95dB Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave Subsonic Filter: 25Hz @24dB/octave KickEQ™ Boost Variable 0-6dB @40Hz

Read more less

KICKER® complete amp kits feature top-quality Hyper-Flex power, ground and turn-on cables. K Series speaker wire and interconnects are also included, as is a heavy-duty AFS fuse holder and fusing. Insulated crimp connectors and zip ties come in the kit as well. One additional year of amplifier warranty is included if purchased with a KICKER amp. C-Series CK4 4AWG 2-Channel This Complete Four Gauge Amp Kit comes complete with Full Spec wire, hardware, fusing and signal cable. Hooking up your amplifier is easy with this complete amp kit. The best hardware, signal and power cable comes in one convenient package, plus get an additional year of warranty when you buy a Kicker amp with this kit. Wire Kit Includes 17 ft. (5.2m) Frost Blue power wire Frost-black terminated ground wire (2 ft) Clear remote turn-on lead wire (18AWG – 17 ft) K-Series speaker wire 16AWG, parallel (round/frost clear and square/frost blue – 40 ft) K-Series interconnect cable (2-channel/5m) AFS single-fuse holder ([2] 1/0  4AWG in and out) 2 nickel-plated crimp-ring terminals (blue and black) Blue vinyl butt splice (22-18AWG) Nickel-plated black spade lug (22-18AWG) 4 nickel-plated spade lugs #8 (blue and black – 16-14AWG) 6 black zip ties Black snap bushing Self-tapping ground lug with washer

Read more less

LX Amplifiers LX-Series Amplifiers is KICKER’s premium amp line designed in-house from the ground up, featuring up to 3,800 watts of dynamic power. What You Can Expect Engineered in the USA, LX can effortlessly serve the needs of car-audio systems that require premium amplification, high power, system design flexibility, DSP-powered features, and the ability to monitor and control it all remotely. It’s the perfect marriage of SQL design and high-powered output. Eliminate Unwanted Noise All seven models utilize FIT+™ (Fail-safe Integration Technology-PLUS), accepting low- and high-level signals up to 40V, with full differential inputs created to eliminate noise that would ruin your sound. All feature the choice of turn-on mode and comprehensive protections for thermal, circuit, and voltage stability, ensuring reliable performance. For the Bass LX features a choice of four very efficient, compact, high-power monoblock amps ranging from 850 to 3000 watts all 1-Ohm stable, with a chassis less than nine inches deep and about a foot or less wide. They’re very easy to install in any application. All-In-One Power Tool We got those too! A full-range, 4-channel amplifier, a 5-channel multi-channel hybrid with subwoofer section, and an innovative 7-channel multi-channel hybrid with sub section complete the lineup. LXRC with Models that Make Bass Six amps with mono channels come with the LXRC (LX Remote Control), giving you dynamic fingertip dash direction of bass level. It features SHOCwave2.0™ (Sub-Harmonic Octave Creation), KICKER’s 2nd-gen digital bass restoration algorithm that recovers lost, low-bass frequencies vital to your music selections. It also displays battery voltage in a fuel-gauge-style readout, control of its RGB LED brightness, and output clipping indication. Specifications LX 3000.1 white paper 51LX30001 Whitepaper PDF RMS Power [Watts Channel] @ 14.4V 1Ω mono: 3000W2Ω mono: 2000W4Ω mono: 1100W Dynamic Power [Watts] 3800 Frequency Response [Hz] 10–160, +0/–1dB Signal-to-Noise Ratio(a-weighted, re: rated power) >95dB Signal-to-Noise Ratio(ref: 1W output) >75dB Dimensions [in, cm] Height: 2-3/8 (6 cm)    Width: 8-7/16 (21.4 cm)Length: 12-5/8 (32 cm) Input Sensitivity High level 1V–40VLow level 125mV–5V Variable Electronic Crossover LP; 24dB/octave Linkwitz-Riley,variable 40–160Hz Variable Subsonic Filter 24dB/octave Linkwitz-Riley,variable hi-pass @ 10–80Hz KickEQ+™ Parametric Bass Boost 0–6dB, variable center 20–80Hz,variable bandwidth 1–5 Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.  

Read more less

KXMA Amps are built for the outdoors. Gain, crossover and bass-boost controls are protected behind a gasket-sealed panel, as is the control cover hiding the settings, creating a water-resistant barrier to key controls. Real Marine™ The KICKER Real Marine standard means your amplifier is purpose-built for your boat. Every KXMA (and KMA)-Series amp comes complete with anti-corrosive speaker, power and RCA terminals, stainless-steel screws, conformal-coated circuit boards and ABYC/NMMA-compliant power connections. KICKER products also undergo rigorous testing to ensure they meet or exceed marine industry standards for UV, humidity and saltwater exposure. This unparalleled commitment to engineering quality and maritime safety is why our products truly are "Real Marine." KickEQ™ delivers as much as an 6dB of extra bump with a simple turn of the knob. A powerful 24dB crossover is also included, letting you quickly tune your system to perfection. A full-range RCA output allows you to easily add another amplifier without running new signal cable to your KICKER KMC Media Center. Class D Amplifier Gain Control With "Gain Match" LED Indicator FIT2™ (Fail-safe Integration Technology) Circuitry Variable 24dB Crossover DSP-Controlled Preamp KickEQ™ 6dB Variable Bass Boost ABYC/NMMA-Compliant Power Terminals Conformal-Coated Circuit Boards Easy Access to Settings behind Gasket-Sealed Cover Panel Black Anodized Aluminum Chassis Top-Mounted, Teal LED Light Pipe Stainless-Steel Mounting Hardware Included Want setup help? Go to KICKER U for a free woofer-and-amp configuration app! This KXMA amplifier delivers as much as 125 watts into four full-range channels, or 250 watts into two sets of bridged channels. See below for more details. Specifications POWER [watts/ch], 2 OHM STEREO 125 x 4 POWER [watts/ch], 4 OHM STEREO 75 x 4 POWER [watts/ch], 4 OHM BRIDGED MONO: 250 x 2 DYNAMIC POWER [watts]: 700 DIMENSIONS [in] all models 2-1/8H x 8-5/16W x ___L 11-3/16 DIMENSIONS [cm] all models 5.4H x 21.0W x ___L 28.4 FREQUENCY RESPONSE [Hz] 10-20k, +0/-1dB INPUT SENSITIVITY High Level 250mV-10V, Low Level 125mV-5V SIGNAL-TO-NOISE RATIO >95dB, a-weighted, re: rated power ACTIVE CROSSOVER (amp 1) 24dB/octave, variable 10-5kHz w/ 10x switch, selectable high pass, low pass or all pass (amp 2) 24dB/octave, variable high pass 10-500Hz, variable low pass 40-5kHz w/10x switch, selectable high pass, low pass, all pass or band pass KickEQ™ BOOST Variable 0-6dB, centered @ 40Hz (Only on amp 2) COMES WITH WIRED REMOTE No

Read more less

Experience the perfect way to get bass on your boat! A mighty Class-D power plant, 12dB crossover and subsonic filter all help you dial in the best sound. Use the remote level control to adjust the bass right from the dash and connect the full-range RCA outputs to expand your system! Ultra-Efficient Class D Design 800 Watts of Dynamic Power Mono Amplifier Conformal-Coated Circuit Board KMBLC Remote Level Control Included Variable 12dB Crossover KickEQ™ Variable 6dB Bass Boost Fixed 25Hz Subsonic Filter RCA Pass Through Output Real Marine™ ABYC/NMMA-Compliant Power Connections 316L Stainless-Steel Hardware Included Want setup help? Go to KICKER U for a free woofer-and-amp configuration app! This KM-Series marine amplifier delivers 800 watts into one channel. See below for more details. Product highlights: Mono Marine Amplifier 300 watts RMS x 1 at 4 ohms 600 watts RMS x 1 at 2 ohms 800 watts RMS x 1 at 1 ohm CEA-2006 compliant Class A/B design Variable low-pass filter (50-200 Hz, 12 dB/octave) Subsonic filter (25 Hz, 24 dB/octave) Variable bass boost (0-6 dB at 40 Hz) Other Features: Weather-resistant conformal-coated circuit boards Stainless-steel no-rust hardware Remote control included Wiring and hardware not included with amplifier 4-gauge power and ground leads and a 100-amp fuse recommended Frequency response: 25-200 Hz Dimensions: 8"W x 2-1/4"H x 6-5/8"D MFR # 48KMA8001   What's in the box: Kicker KMA800.1 owner's manual Mono marine amplifier KMBLC Remote bass level control 19.5' Remote cable (RJ-11 connectors on both ends) Two 3/8" screws Four 3/4" screws Allen key Quickstart guide (Eng/Span/Fren/Other) Power chart Kicker power certification

Read more less

KXM Amplifiers are built for fun, no matter where you go. Power, speaker and input connections are gasket-sealed, as is the control cover hiding the settings, creating a water-resistant barrier to key components. KXMA1200.1 Amplifier The KXM 1200-watt mono amplifier uses Class D technology for huge power in a small chassis. KickEQ+™ provides an enormous 18dB of variable bass boost, while a powerful 24dB crossover and subsonic filter to give you the acoustic control to quickly perfect your sound. A wireless controller is also included for perfecting your sound on the fly. Monitor and adjust gain, bass boost, clipping and more without leaving the driver's seat! Features: Class D Power Plant One-Ohm Stable SHOCwave™ Bass Restoration Processor KXARC Wireless Remote Included Gain Control With "Optimal Input" Indicator Variable 24dB Subsonic Filter FIT2™ (Fail-Safe Integration Technology) Circuitry Variable 24dB Crossover DSP-Controlled Preamp KickEQ+™ 18dB Variable Bass Boost ABYC/NMMA Compliant Power Terminals Conformal-Coated Circuit Boards Easy Access to Settings behind Gasket-Sealed Cover Panel Black Anodized Aluminum Chassis Top-Mounted Teal LED Light Pipe Stainless Steel Mounting Hardware Included Want setup help? Go to KICKER U for a free woofer & amplifier configuration app! This KXM amplifier delivers as much as 1200 watts into one channel. See below for more details. Specifications RMS Power [Watts] @ 14.4V, 4Ω mono, ≤ 1% THD+N : 600 x 1 @ 14.4V, 2Ω mono, ≤ 1% THD+N : 1200 x 1 @ 14.4V, 1Ω mono, ≤ 1% THD+N : +/- 10% Length [in, cm] 9-9∕16 , 24.4 Height [in, cm] 2-⅛, 5.5 Width [in, cm] 8-5⁄16 , 21 Frequency Response ± 1dB 10Hz–160Hz Signal-to-Noise Ratio 95dB Input Sensitivity 250mV–10V Selectable Electronic Crossover Variable Lo-pass 40Hz–160Hz, 24dB/octave Subsonic Filter Variable 10–80Hz, 24dB/octave KickEQ+™ Parametric Bass Boost (Remote Control Adjustable) Boost - Variable 0-18db Center Frequency - 20Hz-80Hz Bandwidth 1-5 Remote Bass Yes CEA Power 600 x 1 @ 4 ohms, 14.4VDC, 1% THD, CEA-2006B (Watts) CEA Signal-to-Noise Ratio -75dB CEA-2006B (ref: 1W, A-weighted)

Read more less

LX1300.7: The Masterpiece of Complete System Integration The KICKER LX1300.7 is the crown jewel of the LX-Series, offering an unprecedented 7-channel solution designed to power an entire high-fidelity ecosystem from a single, sophisticated chassis. Engineered for "Sound Quality Loud" (SQL) performance, this powerhouse features four high-output channels for your primary stage (125W x 4), two additional channels perfect for rear fill or smaller drivers (65W x 2), and a dedicated mono-block section pushing up to 700W to your subwoofers. Utilizing an elite Class-D design, the LX1300.7 delivers massive multi-channel authority while maintaining the thermal stability and efficiency required for high-end automotive installs. Precision is at the heart of the LX1300.7 experience. The included LX Control Center (LXCC) provides a wired diagnostic and tuning hub directly at the amplifier, allowing you to monitor battery voltage, temperature, and clipping in real time while incrementally dialing in gain trim and time delay. For the driver, the LX Remote Control (LXRC) provides fingertip command over bass levels and features SHOCwave 2.0™—KICKER’s advanced digital restoration algorithm that breathes life back into low-frequency signals. Whether you are running a complex 3-way active front stage or a full cabin surround system, this amplifier provides the flexibility and power to handle it all. Built to withstand the rigors of high-performance audio, the LX1300.7 features FIT+™ technology to ensure a crystal-clear signal even in vehicles with complex factory electrical systems. The aesthetic is completely customizable, featuring a reversible center panel and 11 selectable RGB LED accent colors to match your custom build. With comprehensive protection circuitry and precision-engineered Linkwitz-Riley crossovers, the LX1300.7 isn't just an amplifier—it's the definitive command center for a world-class mobile audio experience. 51LX13007 Whitepaper PDF TECHNICAL SPECIFICATIONS LX1300.7 MULTI-CHANNEL SYSTEM PERFORMANCE RMS Power (Amp 1 & 2) 125W x 4 @ 4Ω / 150W x 4 @ 2Ω RMS Power (Amp 3 Pair) 65W x 2 @ 4Ω or 2Ω RMS Power (Sub Channel) 700W x 1 @ 1Ω / 550W x 1 @ 2Ω Bridged Power (Ch 1-4) 250W x 2 @ 4Ω Dynamic Power 1500 Watts Frequency Response 20Hz–20kHz (Stereo) / 10Hz–160Hz (Sub) Signal-to-Noise Ratio >95 dB (a-weighted)   DUAL COMMAND INTERFACE (LXCC & LXRC) DIAGNOSTICS & TUNING FEATURES Bass Restoration SHOCwave 2.0™ (Sub-Harmonic Octave Creation) Real-Time Monitoring Voltage, Temperature, & Protection Status Precision Controls Gain Trim, Time Delay, & Selectable Crossover Slopes Crossover Types HP / LP / BP (High, Low, and Bandpass) Remote Cable Length 19.75 feet (6m) RJ45 for LXRC   DESIGN & DIMENSIONS PHYSICAL SPECIFICATIONS Height 2-3/8 in (6 cm) Width 8-7/16 in (21.4 cm) Length 12-5/8 in (32 cm) Accent Lighting 11 Selectable RGB LED Colors Warranty 2 Years (Authorized Dealer)

Read more less

LX1250.1: Unrivaled Bass Authority and Digital Restoration The KICKER LX1250.1 is a heavyweight monoblock amplifier engineered for those who demand uncompromising low-end power and sophisticated control. As a centerpiece of the premium LX-Series, this amplifier delivers a massive 1250W RMS at 1Ω, providing the raw energy needed to drive the industry’s most demanding subwoofers with absolute composure. Built on a high-efficiency Class-D platform, the LX1250.1 maximizes output while maintaining lower operating temperatures and current draw, ensuring your system hits harder and plays longer without fatigue. True to its "Sound Quality Loud" (SQL) heritage, the LX1250.1 includes the advanced LX Remote Control (LXRC), a multi-functional dash remote that goes far beyond simple volume adjustment. It features SHOCwave 2.0™, KICKER’s second-generation digital restoration algorithm that breathes life back into low frequencies lost in digital compression. The LXRC also provides a real-time "fuel-gauge" style battery voltage readout and a critical output clipping indicator, allowing you to fine-tune your bass response safely from the driver's seat. Designed for the ultimate custom install, the LX1250.1 features a reversible center panel and 11 selectable RGB LED accent colors to match your vehicle's aesthetic. Integration is seamless thanks to FIT+™ technology, which accepts high-level signals up to 40V while utilizing differential inputs to eliminate ground loop noise. With precision tuning tools like the KickEQ+™ parametric bass boost and a 24dB/octave subsonic filter, the LX1250.1 offers the perfect marriage of brute force and surgical accuracy. 51LX12501 Whitepaper PDF TECHNICAL SPECIFICATIONS LX1250.1 MONO AMPLIFIER PERFORMANCE RMS Power @ 1 ohm Mono 1250W x 1 RMS Power @ 2 ohms Mono 750W x 1 RMS Power @ 4 ohms Mono 400W x 1 Dynamic Power 1600 Watts Frequency Response 10 Hz – 160 Hz (+0/-1dB) Signal-to-Noise Ratio >95 dB (a-weighted) Input Sensitivity High Level: 1V–40V / Low Level: 125mV–5V Crossover Slope 24 dB/octave Linkwitz-Riley   LX REMOTE CONTROL (LXRC) FEATURES DASH-MOUNTED COMMAND CENTER Bass Restoration SHOCwave 2.0™ Digital Algorithm System Monitoring Battery Voltage (Fuel-Gauge Style) Protection Output Clipping Indicator RGB Control LED Brightness Adjustment Cable Length 19.75 feet (6m) RJ45 Cable   TUNING & DIMENSIONS PHYSICAL & PROCESSING SPECS Variable Subsonic Filter 24dB/oct, 10–80Hz KickEQ+™ Parametric Boost 0–6dB (Variable Center 20–80Hz) Dimensions (H x W x L) 2-3/8" x 8-7/16" x 9-7/16" Accent Lighting 11 Selectable RGB LED Colors Warranty 2 Years (Authorized Dealer)

Read more less

LX1200.5: The Ultimate All-in-One SQL Powerhouse The KICKER LX1200.5 is the definitive solution for audiophiles seeking a complete, high-performance system overhaul from a single chassis. This 5-channel titan combines the surgical precision of the LX-Series full-range channels with a dedicated, high-current mono subwoofer section. Delivering 125W x 4 + 700W x 1 (at 4Ω/1Ω), it provides the "Sound Quality Loud" (SQL) performance KICKER is famous for. Built with advanced Class-D technology, this amplifier ensures massive output with a smaller footprint, lower operating temperatures, and reduced current draw from your vehicle's charging system. Total system command is achieved through a dual-interface approach. The included LX Control Center (LXCC) provides real-time diagnostic readouts and precision tuning—including time delay and complex crossover configurations—directly at the amplifier. For the driver, the LX Remote Control (LXRC) dash unit offers fingertip access to subwoofer levels and the legendary SHOCwave 2.0™ bass restoration. Whether you’re recovering lost low-end frequencies from digital files or monitoring your battery voltage via the fuel-gauge display, the LX1200.5 keeps you in total control of your acoustic environment. Designed for seamless integration into complex modern vehicles, the LX1200.5 features FIT+™ technology, accepting signals up to 40V while maintaining a noise-free floor. Its aesthetic is as customizable as its sound, featuring a reversible center panel and 11 selectable RGB LED accent colors. From its comprehensive thermal and circuit protections to the variable KickEQ+™ parametric boost, every inch of this amplifier is built to deliver a lifetime of elite, concert-level audio. 51LX12005 Whitepaper PDF TECHNICAL SPECIFICATIONS LX1200.5 5-CHANNEL SYSTEM PERFORMANCE RMS Power (Channels 1-4) 125W x 4 @ 4Ω / 175W x 4 @ 2Ω RMS Power (Sub Channel) 700W x 1 @ 1Ω / 550W x 1 @ 2Ω / 300W x 1 @ 4Ω Bridged Power (Ch 1-4) 350W x 2 @ 4Ω Dynamic Power 1500 Watts Frequency Response 20Hz–20kHz (Stereo) / 10Hz–160Hz (Sub) Signal-to-Noise Ratio >95 dB (a-weighted) Input Sensitivity High Level: 1V–40V / Low Level: 125mV–5V   CONTROL & BASS RESTORATION LXCC & LXRC DUAL INTERFACE FEATURES Bass Restoration SHOCwave 2.0™ (Sub-Harmonic Octave Creation) Precision Tuning Time Delay, Gain Trim, & Selectable Crossover Slope Real-Time Monitoring Battery Voltage, Temperature, & Clipping LEDs Crossover Types HP / LP / BP (High, Low, and Bandpass) Subsonic Filter 24dB/oct, Variable 10–80Hz (Sub Channel)   DIMENSIONS & DESIGN PHYSICAL SPECIFICATIONS Height 2-3/8 in (6 cm) Width 8-7/16 in (21.4 cm) Length 12-5/8 in (32 cm) Accent Lighting 11 Selectable RGB LED Colors Warranty 2 Years (Authorized Dealer)

Read more less

LX850.1: Precision Sub-Harmonic Power and SQL Mastery The KICKER LX850.1 is a high-performance mono-block powerhouse designed to deliver earth-shaking bass with audiophile-grade precision. Engineered from the ground up as part of KICKER's premium SQL line, this amplifier pushes a true 850W RMS at 1Ω, providing the massive current needed to drive high-excursion subwoofers. Utilizing an advanced Class-D topology, the LX850.1 operates with maximum efficiency and minimal heat, ensuring your low-end stays tight and authoritative even during the most demanding listening sessions. Control is the core of the LX850.1 experience, featuring the innovative LX Remote Control (LXRC). This isn't just a volume knob; it’s a command center that puts SHOCwave 2.0™—KICKER’s second-generation digital bass restoration—at your fingertips to recover lost low-bass frequencies. The LXRC also provides real-time monitoring of battery voltage through a fuel-gauge style readout and an output clipping indicator, allowing you to push your system to the limit without risking distortion or equipment damage. Built for the modern installer, the LX850.1 features FIT+™ technology, capable of accepting high-level signals up to 40V while filtering out alternator whine and electrical noise. With a customizable aesthetic featuring 11 RGB LED accent colors and a parametric KickEQ+™ bass boost, this amplifier doesn't just power your music—it defines your entire acoustic environment with unmatched flexibility and legendary KICKER durability. 51LX8501 Whitepaper PDF TECHNICAL SPECIFICATIONS LX850.1 MONO AMPLIFIER PERFORMANCE RMS Power @ 1 ohm Mono 850W x 1 RMS Power @ 2 ohms Mono 500W x 1 RMS Power @ 4 ohms Mono 300W x 1 Dynamic Power 1100 Watts Frequency Response 10 Hz – 160 Hz (+0/-1dB) Signal-to-Noise Ratio >95 dB (a-weighted) Input Sensitivity High Level: 1V–40V / Low Level: 125mV–5V Crossover Slope 24 dB/octave Linkwitz-Riley   LX REMOTE CONTROL (LXRC) FEATURES DASH-MOUNTED COMMAND CENTER Bass Restoration SHOCwave 2.0™ Digital Algorithm System Monitoring Battery Voltage (Fuel-Gauge Style) Protection Output Clipping Indicator RGB Control LED Brightness Adjustment Cable Length 19.75 feet (6m) RJ45 Cable   TUNING & DIMENSIONS PHYSICAL & PROCESSING SPECS Variable Subsonic Filter 24dB/oct, 10–80Hz KickEQ+™ Parametric Boost 0–6dB (Variable Center 20–80Hz) Dimensions (H x W x L) 2-3/8" x 8-7/16" x 9-7/16" Accent Lighting 11 Selectable RGB LED Colors Warranty 2 Years (Authorized Dealer)

Read more less

KICKER LX500.4: The Pinnacle of High-Power SQL Design The KICKER LX-Series 500.4 represents a masterclass in "Sound Quality Loud" (SQL) engineering, designed from the ground up to satisfy the most demanding audiophiles. This 4-channel powerhouse delivers a staggering 125W x 4 at 4Ω, ensuring your mids and highs pierce through with clinical precision and breathtaking authority. Built with a high-efficiency Class-D design, the LX500.4 runs cooler and draws less current, allowing for extended high-volume listening sessions without the risk of thermal shutdown or excessive battery drain. What sets the LX500.4 apart is the revolutionary LX Control Center (LXCC). This wired command module puts real-time diagnostics and precision tuning at your fingertips, featuring battery voltage monitoring, temperature readouts, and clipping indicators. Beyond just power, this amplifier offers unmatched flexibility with FIT+™ technology, which rejects electrical noise and accepts up to 40V signals, making it compatible with virtually any factory or aftermarket head unit. Aesthetic customization meets rugged performance with a reversible center panel and 11 selectable RGB LED accent colors to match your vehicle's interior. Whether you are running a high-end active front stage or bridging the unit to push 450W x 2 into a pair of heavy-duty woofers, the LX500.4 provides the stability and protection features—including gain-match LEDs—needed for a lifetime of premium performance. 51LX5004 Whitepaper PDF TECHNICAL SPECIFICATIONS LX500.4 4-CHANNEL AMPLIFIER PERFORMANCE RMS Power @ 2 ohms Stereo 225W x 4 RMS Power @ 4 ohms Stereo 125W x 4 RMS Power @ 4 ohms Bridged 450W x 2 Dynamic Power 1100 Watts Frequency Response 20 Hz – 20k Hz Signal-to-Noise Ratio >95 dB (a-weighted) Input Sensitivity High Level: 1V–40V / Low Level: 125mV–5V Crossover Slope Variable 12, 18, or 24 dB/octave   LX CONTROL CENTER (LXCC) FEATURES DIAGNOSTICS & TUNING INTERFACE Real-Time Monitoring Voltage, Temperature, Protection Status Signal Indicators LED Output Clip Indication Precision Adjustments Gain Trim, Time Delay, Crossover Frequency Crossover Types HP / LP / BP (High, Low, and Bandpass) Cable Length 3.28 feet (1m) integrated   DIMENSIONS & DESIGN PHYSICAL SPECIFICATIONS Height 2-3/8 in (6 cm) Width 8-7/16 in (21.4 cm) Length 9-7/16 in (24 cm) Accent Lighting 11 Selectable RGB LED Colors Warranty 2 Years (Authorized Dealer)

Read more less

The KICKER LX-Series is a perfect marriage of SQL design and high-powered output, utilizing feedback from the industry to deliver the most requested features while maintaining the highest performance possible. All monoblock amplifiers come with a robust remote level control (LXRC) featuring SHOCwave2.0™. From the Ground Up The LX-Series represents KICKER’s high-power premium amplifier line designed in-house from the ground up. Precision control, next-level flexibility, designed for performance, built to last. Monitor and adjust with the included LXRC Dash Remote Class-D design for lower current draw, longer playing times, and lower operating temperatures Gain-match LEDs show you perfect gain setting KickEQ+™ parametric bass boost 0–6dB Customize the appearance with reversible center panel and choice of 11 RGB LED accent colors Equipped with FIT+™ technology, accepting low- and high-level signals up to 40V, with differential inputs designed to eliminate unwanted noise for crystal-clear sound LX features choice of turn-on modes and comprehensive protections for thermal, circuit, and voltage stability, ensuring reliable performance Comes with the LX REMOTE CONTROL (LXRC) Dynamic fingertip dash remote of bass level adjustment Features SHOCwave2.0™ (Sub-Harmonic Octave Creation), KICKER’s 2nd-gen digital bass restoration algorithm that recovers lost, low-bass frequencies vital to your music selections Displays battery voltage in fuel-gauge-style readout Control of its RGB LED brightness Output clipping indicator to prevent distortion and protect your system Cable Length – 19.75 feet (6m) RJ45 cable LX 1650.1 white paper 51LX16501 Whitepaper PDF RMS Power [Watts Channel] @ 14.4V 1Ω mono: 1650W2Ω mono: 1000W4Ω mono: 550W Dynamic Power [Watts] 2200 Frequency Response [Hz] 10–160, +0/–1dB Signal-to-Noise Ratio(a-weighted, re: rated power) >95dB Signal-to-Noise Ratio(ref: 1W output) >75dB Dimensions [in, cm] Height: 2-3/8 (6 cm)    Width: 8-7/16 (21.4 cm)Length: 9-7/16 (24 cm) Input Sensitivity High level 1V–40VLow level 125mV–5V Variable Electronic Crossover LP; 24dB/octave Linkwitz-Riley,variable 40–160Hz Variable Subsonic Filter 24dB/octave Linkwitz-Riley,variable hi-pass @ 10–80Hz KickEQ+™ Parametric Bass Boost 0–6dB, variable center 20–80Hz,variable bandwidth 1–5 Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

Read more less

KXMA400.2 Marine Amplifier KickEQ™ delivers as much as an 6dB of extra bump with a simple turn of the knob. A powerful 24dB crossover is also included, letting you quickly tune your system to perfection. A full-range RCA output allows you to easily add another amplifier without running new signal cable to your KICKER KMC Media Center. Class D Amplifier Gain Control With "Gain Match" LED Indicator FIT2™ (Fail-safe Integration Technology) Circuitry Variable 24dB Crossover DSP-Controlled Preamp KickEQ™ 6dB Variable Bass Boost ABYC/NMMA-Compliant Power Terminals Conformal-Coated Circuit Board to resist moisture Easy Access to Settings behind Gasket-Sealed Cover Panel Black Anodized Aluminum Chassis Top-Mounted, Teal LED Light Pipe Stainless-Steel Mounting Hardware Included Want setup help? Go to KICKER U for a free woofer-and-amp configuration app! This KXMA amplifier delivers as much as 200 watts into two full-range channels, or 400 watts into one bridged channel. See below for more details. Product highlights: 2-channel marine amplifier 100 watts RMS x 2 at 4 ohms 200 watts RMS x 2 at 2 ohms 400 watts RMS x 1 bridged at 4 ohms (4-ohm stable in bridged mode) CEA-2006 compliant Class D amp technology Gain knob also functions as clip light Variable high-pass filter (10-500 Hz, 24 dB/octave) Variable low-pass filter (40-500 Hz, 24 dB/octave) with 10x switch Bandpass engages both high- and low-pass filters Variable bass boost (0-6 dB at 40 Hz) Other Features: Weather-resistant conformal-coated circuit boards Front-mounted controls protected behind gasket-sealed fold-down door Fail-Safe Integration Technology eliminates noise from your vehicle's electrical system Preamp and speaker-level inputs (speaker wire to RCA adapter required for speaker-level input)) Preamp outputs Wiring and hardware not included with amplifier 8-gauge power and ground leads and a 60-amp fuse recommended for multiple amplifiers, an additional 60-amp in-line fuse between the distribution block and this amplifier is recommended Dimensions: 9-9/16"W x 2-3/16"H x 8-5/16"D

Read more less