All Products Except Clearance
-
LAF Showtime Eco Bass Knobs
Hands down the highest sold US made bass knob in the market! The success of the LAF ECO bass knobs can be seen everywhere, trusted by MAJOR brands nation wide. The combination of our direct sales plus our white label brands has totaled nearly 10,000 units with warranty's remaining in the double digits! For V3 we have made some changes to the appearance. With costs going up everywhere on everything, we stripped the jacket off the cables and made them a tiny bit shorter. Instead of raising our price we have lowered the price while providing the exact same functionality that has been so extensively proven! 15" female/female RCA with injection molded barrels for unparalleled strain protection 22g copper conductor, twisted copper shielding and nylon pull string for added strength Comfortable Aluminum Handle 1 Year Warranty
$44.99
-
SMD SFR-GAL Sunflash Resin Gallon
SMD Sunflash UV-Activated Polyester Resin (1 Gallon) The SMD SFR-GAL is a professional-grade polyester resin designed for rapid curing via ultraviolet light. It eliminates the need for chemical catalysts, allowing for extended work time indoors and a fast set time once exposed to UV rays. Key Features: 100% UV Activated: Sets in as little as 1 minute when exposed to direct sunlight. Zero Catalyst Required: No mixing of hardeners is needed; the resin is ready to use directly from the gallon container. Indefinite Pot Life: Will not harden while working indoors, preventing wasted resin and "stuck" brushes. High Saturation: Engineered for excellent penetration into fiberglass mat and cloth. Post-Cure Finish: Leaves no lingering chemical odor once fully cured. Technical Specifications: Model: SFR-GAL Volume: 1 Gallon Activation Source: Direct Sunlight or UV Blacklight (385-410nm) Chemical Base: Polyester Resin
$119.99
-
SMD SFR-QT Sunflash Resin Quart
SMD Sunflash UV-Activated Polyester Resin (1 Quart) The SMD SFR-QT is a professional-grade polyester resin designed for rapid curing via ultraviolet light. It eliminates the need for chemical catalysts, allowing for extended indoor work time and a fast set time once exposed to UV rays. Key Features: 100% UV Activated: Sets in as fast as 1 minute when exposed to direct sunlight. Zero Catalyst Required: No mixing needed; the resin works directly out of the quart container. Indefinite Pot Life: Will not set up while working inside the shop, preventing wasted resin and stuck brushes. High Saturation: Engineered for excellent penetration and saturation into materials. Post-Cure Finish: Leaves no lingering odor once fully cured. Technical Specifications: Model: SFR-QT Volume: 1 Quart Activation Source: Direct Sunlight or UV Blacklight (385-410nm) Chemical Base: Polyester Resin
$39.99
-
SMD 300A Ceramic Fuse
SMD Heavy-Duty Ceramic ANL Fuses The SMD (Steve Meade Designs) Ceramic ANL fuse is a high-performance alternative to standard electrical protection. Designed for high-current environments, these fuses prioritize thermal stability and circuit safety. Product Advantages: High-Grade Ceramic Construction: Features a ceramic body that offers superior heat resistance compared to traditional plastic fuses. Warp-Resistant: The ceramic casing is designed to maintain its structural integrity under extreme temperatures, preventing the warping or melting common in standard plastic ANL fuses. High-Current Compatibility: Engineered to handle the rigorous demands of high-output electrical systems. Available Amperage Ratings: Available in pairs for the following ratings: 100A 150A 200A 250A 300A 500A 600A
$27.49
-
SMD 500A Ceramic Fuse
SMD Heavy-Duty Ceramic ANL Fuses The SMD (Steve Meade Designs) Ceramic ANL fuse is a high-performance alternative to standard electrical protection. Designed for high-current environments, these fuses prioritize thermal stability and circuit safety. Product Advantages: High-Grade Ceramic Construction: Features a ceramic body that offers superior heat resistance compared to traditional plastic fuses. Warp-Resistant: The ceramic casing is designed to maintain its structural integrity under extreme temperatures, preventing the warping or melting common in standard plastic ANL fuses. High-Current Compatibility: Engineered to handle the rigorous demands of high-output electrical systems. Available Amperage Ratings: Available in pairs for the following ratings: 100A 150A 200A 250A 300A 500A 600A
$27.49
-
SMD 150A Ceramic Fuse
<h2>SMD Heavy-Duty Ceramic ANL Fuses</h2><p>The SMD (Steve Meade Designs) Ceramic ANL fuse is a high-performance alternative to standard electrical protection. Designed for high-current environments, these fuses prioritize thermal stability and circuit safety.</p><h3>Product Advantages:</h3><ul><li><strong>High-Grade Ceramic Construction:</strong> Features a ceramic body that offers superior heat resistance compared to traditional plastic fuses.</li><li><strong>Warp-Resistant:</strong> The ceramic casing is designed to maintain its structural integrity under extreme temperatures, preventing the warping or melting common in standard plastic ANL fuses.</li><li><strong>High-Current Compatibility:</strong> Engineered to handle the rigorous demands of high-output electrical systems.</li></ul><h3>Available Amperage Ratings:</h3><p>Available in pairs for the following ratings:</p><ul><li>100A</li><li>150A</li><li>200A</li><li>250A</li><li>300A</li><li>500A</li><li>600A</li></ul>
$27.49
-
SMD QUADHSFBALM Quad Anl Fuse Block Black
SMD Quad ANL Fuse Block - High-Temp (Black) Protect your vehicle's electrical system from short circuits and catastrophic damage with the SMD Quad ANL Fuse Block. Designed for demanding aftermarket sound systems and heavy-draw accessories like winches and lighting, this industrial-strength 4-spot fuse holder ensures safe and reliable power distribution. Key Features: High-Temperature Design: Engineered to withstand harsh environments. Suitable for under-hood engine compartment mounting, as well as cabin, trunk, or marine applications due to its corrosion-resistant materials. Heavy-Duty Construction: The base is precision-milled from durable HDPE. Premium Hardware: Built utilizing a combination of Aluminum, Stainless Steel, and Copper components for optimal conductivity and longevity. Safety Cover: Includes a 3/16" clear acrylic cover to protect against accidental contact with live terminals. Optimal Placement: Designed to be mounted within 18" of your power source (front battery, alternator, or auxiliary battery bank) for maximum protection. Technical Specifications: Model: QUADHSFBALM (Black) Capacity: 4-Spot (Quad) ANL Fuse Holder Base Material: Milled HDPE Cover Material: 3/16" Clear Acrylic Dimensions: 5" x 5" x 2" (LxWxH) Origin: Made in the USA
$84.69
-
SMD TRIPHSFBALM Triple Anl Fuse Block Black
SMD Triple ANL Fuse Block - High-Temp (Black) Protect your vehicle's electrical system from short circuits and catastrophic damage with the SMD Triple ANL Fuse Block. Designed for demanding aftermarket sound systems and heavy-draw accessories like winches and lighting, this industrial-strength 3-spot fuse holder ensures safe and reliable power distribution. Key Features: High-Temperature Design: Engineered to withstand harsh environments. Suitable for under-hood engine compartment mounting, as well as cabin, trunk, or marine applications due to its corrosion-resistant materials. Heavy-Duty Construction: The base is precision-milled from durable HDPE. Premium Hardware: Built utilizing a combination of Aluminum, Stainless Steel, and Copper components for optimal conductivity and longevity. Safety Cover: Includes a 3/16" clear acrylic cover to protect against accidental contact with live terminals. Optimal Placement: Designed to be mounted within 18" of your power source (front battery, alternator, or auxiliary battery bank) for maximum protection. Technical Specifications: Model: TRIPHSFBALM (Black) Capacity: 3-Spot (Triple) ANL Fuse Holder Base Material: Milled HDPE Cover Material: 3/16" Clear Acrylic Dimensions: 5" x 3.978" x 2" (LxWxH) Origin: Made in California, USA
$67.09
-
SMD 1CHG8 1 Channel Square Terminal Cup Grade 8 Black
SMD 1-Channel Square Heavy Duty Terminal Cup (Grade 8 Black) The SMD 1CHG8 is a high-performance terminal cup designed for high-pressure speaker enclosures. Precision-milled from 3/4" HDPE, this square-profile unit provides an airtight, rigid alternative to standard plastic terminal cups that are prone to cracking or leaking under heavy stress. Key Features: Heavy-Duty Construction: Milled from 3/4" HDPE, a high-strength material engineered to withstand extreme box pressure without deforming. Grade 8 Hardware: Equipped with high-strength Grade 8 hardware (14-piece set) for maximum durability and a secure electrical connection. Airtight Performance: Precision-milled to ensure no air leaks, maintaining the efficiency and tuning of your enclosure. Industrial Terminals: Features 5/16" bolt terminals compatible with standard heavy-duty ring terminals. Reusable Design: The rugged material allows the terminal cup to be removed and reinstalled in future enclosures when upgrading your system. Technical Specifications: Model: 1CHG8 Hardware Type: Grade 8 Steel Material: 3/4" Milled HDPE Terminal Size: 5/16" Bolt Cutout Diameter: 2.75" Flange Diameter: 3.75" Dimensions: 3.75" x 3.75" x 1.5" (LxWxH) Origin: Made in the USA
$27.49
-
$571.45 $457.16
-
$0.00 - $10.00
-
$0.00 - $20.00
-
AUDIO ACE STR8 NST 8" DUAL 2 OHM SUBWOOFER
Product Overview: Audio Ace’s Budget-Friendly Powerhouse (D4) The Audio Ace STR8 NST 8" D2 is an 8-inch subwoofer designed for big output on a budget. Rated for 1,000W RMS, this compact powerhouse is built to deliver strong sound and high performance without the flagship price tag. It features a 2.5-inch epoxy-coated voice coil, a robust 159 oz motor, and a linear excursion (X_max) of 15.5mm each way. The Dual 2 Ohm impedance provides flexible final impedance options of 1 Ohm or 4 Ohms. AUDIO ACE STR8 NST 8" DUAL 4 OHM SPECIFICATIONS Size 8 Inch RMS Power Handling 1,000 Watts Nominal Impedance Dual 2 Ohm (D2) Voice Coil 2.5 Inch Epoxy Coated Motor Weight 159 oz Maximum Excursion (Xmax) 15.5mm Each Way Mounting Depth 6.5 Inches Cutout Diameter 7.264 Inches THIELE-SMALL PARAMETERS Sensitivity (SPL) 82 dB Electrical Q (Qes) 0.616 Mechanical Q (Qms) 5.529 Total Q (Qts) 0.554 Resonance Frequency (Fs) 54 Hz Effective Piston Area (SD) 196.07 BL Factor (Bl) 19.132
$229.00
-
AUDIO ACE JESTER 12" DUAL 2 OHM SUBWOOFER
Product Overview: Audio Ace’s Powerful and Versatile 12-Inch Driver The Audio Ace Jester 12" D2 is designed to achieve a high level of both Sound Quality (SQ) and Sound Pressure Level (SPL). Conservatively rated at a robust 3, 000W RMS, the Jester is built with a low Free Air Resonance (Fs) and a strong 300 Oz magnet structure, allowing it to be versatile and sound great across a wide range of music. Featuring a heavy-duty die-cast aluminum basket, a 3-inch BACCAW 4-layer voice coil, and a 4-layer 10-inch spider suspension, this 12-inch driver is a perfect choice for achieving EXTREME sound levels in your daily driver. The Dual 2 Ohm coil provides a flexible path to a 1 Ohm or 4 Ohm final load. AUDIO ACE JESTER 12" DUAL 2 OHM SPECIFICATIONS Model Jester 12" High Performance Subwoofer RMS Power Handling (Conservative) 3,000 Watts Voice Coil 3" BACCAW 4 Layer Voice Coil Magnet Structure 300 Oz Suspension 4 Layer 10" Spider Basket Heavy Duty Die Cast Aluminum Nominal Impedance Dual 2 Ohm (D2) Cutout Diameter 11.25 inches Mounting Depth 8.5 inches Total Weight 47.6 Lbs LOSS FACTORS & MISC PARAMETERS Total Q (Qts) 0.386 Mechanical Q (Qms) 4.787 Electrical Q (Qes) 0.420 Free Air Resonance (Fs) 35.4 Hz Sensitivity (Lm) 83.37 dB Equivalent Volume (Vas) 12.8560 L Moving Mass (Mms) 454.545 g BL Factor (Bl) 29.466 DC Resistance (Re) 3.60 Ohms Effective Piston Area (Sd) 452.39
$549.00
-
RESILIENT SOUNDS GOLD V2 10" DUAL 2 OHM (D2) SUBWOOFER
Low Impedance, High Impact 10-Inch Bass The Resilient Sounds GOLD V2 10" D2 is engineered for high-efficiency systems where a low final impedance is critical. With a conservative 1500W RMS rating and a monumental 31mm of XMAX, this 10-inch subwoofer delivers uncompromising bass performance. Its core features—including the triple-stacked 220mm motor and the 3-inch 4-layer voice coil—ensure it handles extreme power reliably. The Dual 2 Ohm voice coil is optimized for achieving a 1 Ohm final load when wired in parallel (or 4 Ohms in series), making it the perfect match for high-current, 1 Ohm-stable mono amplifiers. TECHNICAL SPECIFICATIONS Specification Detail Model Gold V2 10" Nominal Impedance Dual 2 Ohm (D2) RMS Power Handling (Conservative) 1500 Watts Maximum Excursion (XMAX) 31MM Voice Coil 3-inch 4 Layer (25% Longer than V1) Motor Structure Triple Stack 220mm Motor with Venting (15% Larger than V1), Engraved Bottom Plate, Molded Motor Boot, Aluminum Shorting Ring Surround / Spider NEW High Roll Tooled Surround, 8.5" Spider Pack with Dual Sewn Leads Frame/Basket Cast Aluminum Frame Terminals 4 Ga Push Terminals Gasket Aluminum Gasket Available Sizes 10", 12", 15", and 18" RECOMMENDED ENCLOSURE SPECIFICATIONS Internal Volume (Cubic Ft) 1.25 - 2 CU FT Tuning Frequency 28 - 32 HERTZ Port Area 12 - 16 SQ INCHES OF PORT AREA PER CUBIC FT Mounting Depth 8.25 INCHES Cutout Diameter 9 7/16 INCHES Displacement 0.17 CU FT Outside Diameter 10 23/32 INCHES
$429.99
-
Stetsom BRAVO BASS Flex 8K Mono Class D Car Audio Amplifier
The Stetsom BRAVO BASS Flex 8K is a mono, Class D car audio amplifier featuring an Automatic Impedance System (FLEX) that adjusts its output impedance from 0.5 Ohm to 1 Ohm. It is designed for high-performance BASS and SUB BASS applications. The Bravo Bass Line amplifier is a powerful and high-quality car audio amplifier that delivers an impressive 8000 watts RMS output, designed exclusively for BASS and SUB BASS performance. It features the advanced FLEX – Automatic Impedance System, which intelligently adjusts the amplifier’s impedance from 0.5 to 1 Ohm according to the needs of the connected speakers, ensuring optimal performance and system stability in every setup. To maintain efficient and silent operation, the amplifier is equipped with Smart and Silent Coolers that provide excellent heat dissipation while minimizing noise, allowing the system to perform reliably even under heavy loads. The In/Out Audio RCA connections make it possible to link the amplifier with another unit, offering flexible system expansion for more powerful configurations. Additionally, it supports up to 7 AWG speaker connectors and up to 00 AWG double power and double ground connectors, ensuring strong and stable current flow for consistent output performance. Compact, elegant, and built for automotive sound enthusiasts, the Bravo Bass Line amplifier combines a stylish design with maximum performance in bass and sub-bass reproduction. It fits easily into any car audio setup, delivering deep, clean, and controlled low frequencies that elevate the entire listening experience. Technical Specifications Specification Detail Minimum Output Impedance 0.5 OHM ~ 1 OHM (AUTO) Number of Channels 1 RMS Power @ 14.4V (Output Varies by Auto-Impedance) 8,800W RMS @ 0.5 Ohm 9,000W RMS @ 0.67 Ohm 8,700W RMS @ 0.80 Ohm 9,000W RMS @ 1 Ohm Supply Voltage 9V ~ 17V DC Frequency Response (-3dB) 5Hz ~ 200Hz Crossover Low Pass (LPF) 30Hz ~ 200Hz (Variable) Crossover Subsonic Filter 5Hz ~ 40Hz (Variable) Bass Boost 0dB ~ +10dB (30Hz ~ 70Hz selectable frequency) Signal to Noise Ratio >90 dB Input Sensitivity 0.2V ~ 6V Input Impedance 55K Ohms Musical Consumption 390A BASS Consumption 780A Dimensions (H x W x L) 3.1" x 9.1" x 19.4" Weight 15.6 lb (7.10 Kg) Quantity of Speakers Speaker Impedance Resultant Impedance 2 x speakers 1 OHM 0.5 OHM 4 x speakers 2 OHMS 0.5 OHM 3 x speakers 2 OHMS 0.66 OHM 2 x speakers 2 OHMS 1 OHM 4 x speakers 4 OHMS 1 OHM
$781.99
-
STETSOM BRAVO BASS 8K Mono 1-Channel Class D - 8000 Watts DIGITAL SUBWOOFER AMPLIFIER
Unrivaled Power for Competition Bass The Stetsom BRAVO BASS 8K is the definitive choice for the extreme automotive sound enthusiast, developed for unrivaled performance in BASS and SUB BASS applications. This Class D Mono Amplifier outputs an earth-shattering 8200 Watts RMS at 1 Ohm (14.4V), providing the massive energy required to drive the most demanding subwoofer setups. Engineered for precision and impact, its optimized frequency response spans from 5Hz to 600Hz (Flat ON), ensuring powerful, clean bass that sets a new standard for low-frequency definition. The BRAVO BASS 8K includes a complete suite of professional audio controls, including variable Low Pass and Subsonic Filters, plus a versatile Bass Boost, giving you the ability to fine-tune your system for competition, daily driving, or simply maximum SPL. Despite its colossal power, it maintains a high Signal-to-Noise Ratio (> 90dB) and features a robust Smart Protection System for reliable, high-performance operation. Advanced Control & Competition Features Customizable Bass Impact: The BASS BOOST function offers variable gain from 0dB to +10dB at a selectable frequency between 30Hz and 70Hz to maximize low-end punch. Precision Filtering: Utilize the Low Pass Filter (30Hz ~ 250Hz) and the critical Subsonic Filter (5Hz ~ 40Hz) to protect your subwoofers and prevent reproduction of damaging frequencies. FLAT Mode Switch: Quickly bypass all Crossover and BASS BOOST settings for full-range (up to 600Hz) signal reproduction when desired. Reliability & Protection: Equipped with multiple COOLERs for efficient heat management and a Smart Protection System that monitors for faults like short circuits, overheating, and voltage fluctuations (indicated by the PROT LED). Wiring Recommendation: Due to the extreme power consumption, the use of 00 AWG or larger cables for power and ground connections is strongly recommended for optimal performance and safety. TECHNICAL SPECIFICATIONS CHARACTERISTIC Detail Number of Channels 1 RMS Power @ 1 Ohm (14.4V) 8200W RMS Power @ 2 Ohm (14.4V) 4900W Supply Voltage 9V ~ 17V DC Frequency Response (-3dB) FLAT ON 5Hz ~ 600Hz Frequency Response (-3dB) FLAT OFF 5Hz ~ 250Hz Crossover Low Pass (LPF) 30Hz ~ 250Hz (Variable) Crossover Subsonic Filter 5Hz ~ 40Hz (Variable) Bass Boost $0\text{dB} \sim +10\text{dB}$ (30Hz ~ 70Hz) Signal to Noise >90 dB Input Impedance 4.8K Ohms Musical Consumption 365A BASS Consumption 730A Dimensions (H x W x L) 3.14" x 9.11" x 16.49" Weight 13.22 lbs
$737.99
-
STETSOM BRAVO BASS 3K DIGITAL SUBWOOFER AMPLIFIER
Performance Focused on BASS and SUB BASS The Stetsom BRAVO BASS 3K is engineered for automotive sound lovers demanding maximum performance in BASS and SUB BASS frequencies. This Class D Mono Amplifier delivers a powerful 3000 Watts RMS at 1 Ohm (14.4V), providing the massive low-frequency power required for competition-level sound systems. Its exceptional frequency response, optimized from 8Hz to 600Hz (when FLAT mode is active), ensures powerful bass with clarity and definition for use with subwoofers and woofers. The unit features sophisticated audio controls, including a variable Subsonic Filter and a customizable Bass Boost, allowing for precision tuning and maximum speaker protection. Built with a compact design, the BRAVO BASS 3K offers high efficiency and a reliable Smart Protection System for long-lasting, high-impact performance. Key Features & Audio Controls Precision Crossover: Includes both a Low Pass Filter (30Hz ~ 250Hz) and a Subsonic Filter (8Hz ~ 40Hz) to perfectly match the amplifier to your subwoofers and protect them from damaging ultra-low frequencies. Customizable Bass: The BASS BOOST function offers variable gain from 0dB to +10dB at a selectable frequency between 30Hz and 70Hz, allowing you to dial in your preferred bass impact. FLAT Mode Switch: A convenient switch to instantly bypass all Crossover and BASS BOOST settings for quick configuration or maximum frequency output. Advanced Protection: Features a PROT (Protection) LED and a CLIP LED for quick diagnosis, monitoring for faults like overheating, short circuits, and signal saturation. Optimized Connections: Recommended wiring includes minimum 4 AWG for power and 8 AWG for speaker output (for 1 ohm load), ensuring maximum power transfer and safety. TECHNICAL SPECIFICATIONS CHARACTERISTIC Detail Number of Channels 1 RMS Power @ 1 Ohm (14.4V) 3000W RMS Power @ 2 Ohm (14.4V) 1800W Minimum Output Impedance 1 Ohm Supply Voltage 9V ~ 17V DC Frequency Response (-3dB) FLAT ON 8Hz ~ 600Hz Frequency Response (-3dB) FLAT OFF 8Hz ~ 250Hz Crossover Low Pass (LPF) 30Hz ~ 250Hz (Variable) Crossover Subsonic Filter 8Hz ~ 40Hz (Variable) Bass Boost 0 +10{dB} (30Hz ~ 70Hz) Signal to Noise >90 dB Input Sensitivity 200mV Input Impedance 5K Ohms Musical Consumption 132A BASS Consumption 265A Dimensions (H x W x L) 3.14" x 9.11" x 9.29" Weight 6.3 lbs
$344.99
-
Stetsom BRAVO BASS 5K Mono 1 Channel Class D Digital Subwoofer Amplifier
Massive Power & Precision Bass The Stetsom BRAVO BASS 5K is engineered specifically for automotive sound enthusiasts who demand maximum performance in BASS and SUB BASS. This Class D Mono Amplifier delivers a staggering 5200 Watts RMS at $1 \text{ Ohm}$ $(14.4\text{V})$, ensuring your subwoofers hit those deep, thunderous lows with unmatched power and clarity. With an optimized frequency response of $5\text{Hz}$ to $600\text{Hz}$ (when FLAT mode is ON), this amp provides powerful bass with exceptional definition. It offers advanced control features including a fully adjustable Low Pass Crossover, a precision Subsonic Filter, and a customizable Bass Boost to fine-tune your sound to competition standards. The amp also features a Smart Protection System and dedicated COOLERs to maintain optimal temperature and reliability under intense use. Advanced Control & Reliability Features Bass Boost Control: Variable control for increasing bass from 0dB to +10dB, with frequency selection from 30Hz to 70Hz. Subsonic Filter: Variable control to protect your subwoofers by precisely setting the initial frequency (from 5Hz to 40Hz) that the amplifier will reproduce. FLAT Switch: Allows you to quickly bypass all settings on the CROSSOVER and BASS BOOST controls for maximum frequency reproduction (up to 600Hz). Cooling System: Equipped with internal COOLERs for efficient amplifier cooling. Smart Protection System (PROT LED): Features a protection system that monitors for issues like overheating, short circuits, and low battery voltage, shutting down the amplifier to prevent damage. Recommended Wiring: For maximum power and safety, the manual recommends 00 AWG cable for positive/negative power connections and 7 AWG for speaker output. TECHNICAL SPECIFICATIONS Specification Detail Number of Channels 1 RMS Power @ 1 Ohm (14.4V) 5200W RMS Power @ 2 Ohm (14.4V) 2900W Supply Voltage 9V ~ 17V DC Frequency Response (-3dB) FLAT ON 5Hz ~ 600Hz Frequency Response (-3dB) FLAT OFF 5Hz ~ 250Hz Crossover Low Pass (LPF) 30Hz ~ 250Hz (Variable) Crossover Subsonic Filter 5Hz ~ 40Hz (Variable) Bass Boost 0 ~ +10dB (30Hz ~ 70Hz) Signal to Noise >90 dB Input Impedance 4.8K Ohms Musical Consumption 228A BASS Consumption 456A Dimensions (H x W x L) 3.14" x 9.11" x 13.11" Weight 9.50 lbs
$591.99
-
Sundown Audio Z-Series ZV7 18" Subwoofer
The Z v.7 is the third step up in Sundown's 2025 "ultra-high excursion" sub-woofer lineup after the M and X v.4 series. All models (12,15,18) feature our custom tooled and patented frames (US Patent Numbers D691597, D691598, and D741841) – the Sundown “mega-platform.” Please note – the Z v.7 is not available, aside from special orders, in 10s due to the motor size. We mate these new platform frames to a quad stacked 265mm (10.43”) diameter motor structure with a total magnet stack height of 100mm (3.94”) featuring a hyper-extended pole and extreme clearances (allowing over 4" p-p travel before mechanical bottom effectively making it bottomless). This is, by far, the largest motor we have ever produced on a Z series sub-woofer. The motor force factor (BL^2/RE) is ~50% higher than the previous generation Z v.6 series. This motor drives a 3.3" diameter 4-Layer Round Wire Aluminum Voice Coil wound on a thick aluminum former. These new round wire coils use a special Sundown designed “fat wire” winding method to handle significant amounts of power and abuse. Based on Sundown's years of experience with the Z v.4, 5, and 6 series we've also improved the voice coil ventilation yet again. The Z v.7 features an entirely new and patent-pending airflow directing pole cap, six pole OD channels, SIXTEEN gap vents, and a cross-drilled / slotted top plate to keep the voice coil running cool under extreme conditions.The Z v.7 motor also features a 9mm thick magnet ID Faraday ring which is locked into both the top and back plates. This ring combined with an all-new pole-extension inductance sleeve gives the Z v.7 the most linear inductive performance of any mega-platform sub-woofer to date. As if all of this were not enough to cement the Z v.7as a legend... we were also able to achieve 42mm of one-way linear excursion by 70% BL with an extremely uniform curve via our extensively FEA optimized motor and 95mm long voice-coil winding length. The Z v.7 series was designed from the ground-up to become the new standard in the low-frequency / small, ported box sub-woofer category in this price range. They will work in the same enclosures that are commonly used for Sundown Audio's mega-platform sub-woofers. The Z v.7 series, like its other mega-platform brethren, is really a different kind of woofer due to its incredibly linear suspension. They are designed for the LOWEST level of bass extension possible in a small enclosure while maintaining extremely low levels of distortion. Physical Dimensions: Download
$1,469.99
-
Sundown Audio SA-Series SA6.5M 6.5" Speakers
The all-new 2025 Sundown SA speaker series has been designed to make a statement. What statement, you may ask? That Sundown Audio can be just as serious about SQ as we are about SPL. Many people already know this but our subwoofers – even the ones used for crushing demos – have some of the lowest distortion on the market. We are now bringing our unique approach to the more dedicated Sound Quality market.Starting at the upper end of the frequency spectrum we have the SA-1T Tweeter. The SA-1T features a 25.5mm silk dome (total 38mm including surround) driven by a powerful neodymium motor structure. The dome features a compact, tuned back chamber which helps it to achieve its extremely low FS around 700hz. This gives you an enormous amount of flexibility in choosing the crossover. The tweeter can be used as a 2-way with the 6.5M or the 8M models or as part of a three way with either and the 3M model. In addition to the low FS and smooth response the SA-1T has a very high 92dB sensitivity so it doesn't take much power to get loud enough for just about anyone. The SA-1T is the 4th generation SA tweeter building on the success of the tweeter found in the SA Component sets over three generations.Headed down the spectrum to the midrange we have the SA-3M. This "little" unit is something incredibly special and is a favorite project of lead product designer / founder Jacob Fuller. We really went all-out on this unit to address the "big 3" drivers of distortion. The SA-3M features 4.5mm of one-way linear excursion by 70% BL (with 8mm x-mech thanks to the custom tooled frame – so no bottoming out even on powerful dynamics) and over 6mm by CMS and LE definitions on Klippel. There is essentially NO risk of the driver reaching linearity limits in most applications. The beefy motor structure is a combination of ferrite and a neodymium pole cap magnet to help us reach 84.5dB sensitivity at 1-watt. There is a double LE treatment internal to the motor via both a copper pole sleeve and an aluminum magnet ID shorting ring allowing the SA-3M to play full-range to beyond 20khz (although, for several reasons, we do suggest using a tweeter for the top-end). On the bottom end they can be high-pass crossed over at 300hz effortlessly with 150-watts of power handling (thanks to the 28mm diameter, extra-long voice coil) or even lower if needed, with less power, due to the incredibly high linear stroke. The suspension system, surround and spider, of the SA-3M took over a year of FEA simulations and testing to reach perfection and is just as important as the motor to the resulting low distortion. We gave the suspension just as much attention as we would for a full blown high-stroke subwoofer. To finish off this masterpiece we tested several different types of woven carbon fiber cones & dust caps to achieve the best FR possible.To finish off the 2025 SA speaker line we created the SA-6.5M and the SA-8M. Both of which can be used as a mid-bass or mid-range speaker depending on your application. Both drivers feature the same attention to detail as the 3M regarding the carbon cone and dust cap, surround, and spider. All of these parts were fully FEA simulated and Klippel verified.The SA-6.5M features 5.9mm one-way linear excursion by 70% BL, 7mm by CMS, and 6.28mm by LE on Klippel. Thanks to the efficient motor venting and ample voice coil the power handling is rated for 110-watts full range / 200-watts with a 70hz HPF filter with a respectable 89dB sensitivity. As with the SA-1T this is a 4th generation SA speaker due to the SA component set from prior generations. For this iteration we optimized it further and also created a new custom-tooled frame. The revised frame is more aerodynamics and also allows for superior coil ventilation. As with most Sundown products you will find a thick magnet-ID Faraday ring as well. Last, but absolutely not least, we have the SA-8M which takes linear stroke to yet another level. We were able to achieve 9mm one-way linear by 70% BL and nearly 10mm by CMS and LE standards. As with the 3M, the 8M features a pole sleeve and magnet ID faraday ring for LE treatment. This unit is an absolute powerhouse for mid-bass, and we believe it will make big waves in the SQ world. On the output side it has a 91.5dB sensitivity and will handle 130-watts full-range / 250-watts with a 70Hz HPF thanks to the efficient motor venting and huge 2" coil. The SA-8M is all-in on SQ and output potential – the Sundown way!Sold As A Pair
$349.99
-
XS Power TB-602v1
XS Power TB-602v1 Aluminum Terminal Blocks - Durable 2-Spot 1/0AWG Battery Terminal Connectors for Automotive Car Boat - Zinc Plated Adapters with Stainless Wingnuts
$59.99
-
XS Power XS Power PSX20Q 12V Group 20/20L AGM Powersports Battery
Deep Cycle 12-Volt AGM Powersports Battery Group 20Q Max Amps: 1,000 Cold Cranking Amps: 290 Reserve Capacity: 26 minutes M6 Terminal Hardware Incl. Charging Temp: 5°F: 120°F (-15°C to 50°C) Two Year Warranty 14.6 lbs. On the trail, on the job, or just having fun, the XS Power PSX20Q is perfect for powering your UTV, motorcycle, personal watercraft or snowmobile. Using Absorbent Glass Mat (AGM) technology, it easily delivers all the energy you need for aftermarket accessories like light bars, power inverters, winches, your car's audio system, or other electronics.The battery’s low internal resistance allows it to deliver an impressive 330 cranking amps, so your engine starts fast, even in extremely hot or cold weather. Its sealed construction keeps it completely safe from spills and moisture on even the roughest ride.See the specifications below.12V BCI Group 20Q, AGM Battery
$169.99
-
XS Power XS Power BIG3RD Big 3 Wire Kit
XP FLEX, 1/0 AWG, 250A Big 3 Upgrade Kit
$99.99
