Terminals
-
$21.99
-
XS Power XS Power TB-608 Billet Battery Terminal Block
Designed exclusively for our xMAX90-DIY, TB-680 allows for 8x bare wire connections on both the positive and negative terminals, allowing you to efficiently extract all the power from xMAX90-DIY. They are sold as a pair and constructed of 600-Series aluminum, allowing for high current capabilities. Included with the terminal blocks are both M6 and M8 bolts, allowing the connection of these terminal blocks to the unit and connection of live wires to your amplifier or other electronics. 600 Series Aluminum Terminal Blocks, 1/0, 8 Spots, M6/M8 Bolts, Pair
$99.99
-
$39.99
-
XS Power XS Power TB-604v2 Billet Battery Terminal Block
600 Series Aluminum Terminal Blocks, 1/0, 4 Spots, M6/M8 Bolts, Pair
$69.99
-
SMD 1CHG8 1 Channel Square Terminal Cup Grade 8 Black
SMD 1-Channel Square Heavy Duty Terminal Cup (Grade 8 Black) The SMD 1CHG8 is a high-performance terminal cup designed for high-pressure speaker enclosures. Precision-milled from 3/4" HDPE, this square-profile unit provides an airtight, rigid alternative to standard plastic terminal cups that are prone to cracking or leaking under heavy stress. Key Features: Heavy-Duty Construction: Milled from 3/4" HDPE, a high-strength material engineered to withstand extreme box pressure without deforming. Grade 8 Hardware: Equipped with high-strength Grade 8 hardware (14-piece set) for maximum durability and a secure electrical connection. Airtight Performance: Precision-milled to ensure no air leaks, maintaining the efficiency and tuning of your enclosure. Industrial Terminals: Features 5/16" bolt terminals compatible with standard heavy-duty ring terminals. Reusable Design: The rugged material allows the terminal cup to be removed and reinstalled in future enclosures when upgrading your system. Technical Specifications: Model: 1CHG8 Hardware Type: Grade 8 Steel Material: 3/4" Milled HDPE Terminal Size: 5/16" Bolt Cutout Diameter: 2.75" Flange Diameter: 3.75" Dimensions: 3.75" x 3.75" x 1.5" (LxWxH) Origin: Made in the USA
$27.49
-
XS Power XS Power 553 Battery Post Adaptor
I-BAR Marine Side and Top Terminal Adaptor with 5/16" and 3/8" Studs
$59.99
-
XS Power XS Power 554 Battery Post Adaptor
I-BAR Marine Terminal Adaptor with 5/16 and 3/8" Studs - Top Only
$59.99
-
XS Power XS Power 590 Battery Post Adaptor
M6 to 3/8" (2) Stud Adaptors
$21.99
-
$21.99
-
$21.99
-
SMD 1CHCOP 1 Channel Terminal Cup Copper Black
SMD 1-Channel Heavy Duty Terminal Cup (Copper Black) The SMD 1CHCOP is a high-strength alternative to standard injection-molded plastic terminals. Precision-milled from 3/4" HDPE, this single-channel unit is engineered to remain airtight and structurally sound under extreme subwoofer enclosure pressure. Key Features: Durable Material: Milled from 3/4" HDPE, offering a high strength-to-weight ratio that will not break or leak under grueling box pressure. Premium Hardware: This specific model is equipped with high-quality copper hardware to ensure maximum conductivity and long-term durability. Heavy-Duty Terminals: Features 5/16" bolt terminals designed for a secure electrical connection with standard ring terminals. Reusable Design: Built to withstand multiple installations, allowing the unit to be safely transferred between enclosures when upgrading. Technical Specifications: Model: 1CHCOP Color/Hardware: Black HDPE / Copper Hardware Material: 3/4" Milled HDPE Terminal Size: 5/16" Bolt Cutout Diameter: 2.75" Flange Diameter: 3.75" Dimensions: 3.75" x 3.75" x 1.5" (LxWxH) Origin: Made in the USA
$46.19
-
SMD 2CHG8 2 Channel Terminal Cup Grade 8 Black
SMD 2-Channel Heavy Duty Terminal Cup (Grade 8 Black) The SMD 2CHG8 is a high-strength 2-channel terminal cup designed for high-pressure subwoofer enclosures. Precision-milled from 3/4" HDPE, this unit provides a rigid, airtight alternative to standard plastic terminal cups that often crack or leak under heavy excursion. Key Features: High-Pressure Performance: Milled from solid 3/4" HDPE with a 1/2" body and 1/4" flange to ensure structural integrity in the most demanding enclosures. Grade 8 Hardware: Equipped with high-strength Grade 8 hardware for maximum durability and secure electrical contact. 2-Channel Configuration: Allows for independent wiring of multiple voice coils or drivers through a single terminal location. Industrial Terminals: Features 5/16" bolt terminals compatible with heavy-duty ring terminals. Reusable Design: Built to last a lifetime, this terminal cup can be moved and reinstalled in new enclosures as you upgrade your system. Technical Specifications: Model: 2CHG8 Material: 3/4" Milled HDPE Hardware Type: Grade 8 Steel Terminal Size: 5/16" Bolt Dimensions: 4.625" x 5.857" x 1.5" (LxWxH) Origin: Made in the USA
$31.89
-
XS Power XS Power TB-706v1 Billet Battery Terminal Block
700 Series Copper Terminal Blocks, 1/0, 6 Spots, M6/M8 Bolts, Pair
$129.99
-
XS Power XS Power TB-704v1 Billet Battery Terminal Block
700 Series Copper Terminal Blocks, 1/0, 4 Spots, M6/M8 Bolts, Pair
$109.99
-
XS Power XS Power TB-604v1 Billet Battery Terminal Block
600 Series Aluminum Terminal Blocks, 1/0, 4 Spots, M6/M8 Bolts, Pair
$69.99
-
$21.99
-
$49.99
-
SMD QR2ALM Qr-2 Terminal Cup Black
SMD QR-2 Heavy Duty Quick Release Terminal Cup Stop settling for wimpy, injection-molded terminal cups that crack under pressure. The SMD QR-2 is the over-engineered solution for high-output enclosures, combining bulletproof construction with the ultimate convenience of a quick-release system. Why It’s Better: Indestructible Build: CNC-milled from 3/4" HDPE. It won't warp, leak, or deform. Magnetic Quick Release: High-strength N52 Neodymium magnets allow you to pull your box "in a snap" without tools or fumbling with wires. Vibration Proof: 100% guaranteed to stay connected, no matter how much air your subwoofers move. Premium Signal: Includes 5ft of 10ga 100% OFC speaker wire and heavy-duty 1/2" terminal blocks. Quick Specs: Material: 3/4" HDPE Body & Flange Terminals: Aluminum/Copper blocks with 5/16" set screws (fits up to 8ga) Seal: Pre-installed cork gasket for an airtight fit Warranty: Lifetime Warranty Origin: Made in California, USA
$266.19
-
SMD QR1ALM Qr-1 Terminal Cup Dolphin Grey
SMD QR-1 Heavy Duty Quick Release Terminal Cup The SMD QR-1 is a heavy-duty solution designed to address common points of failure in speaker enclosures. Precision-milled from 3/4" HDPE with a 1/2" body and 1/4" flange, this terminal cup is engineered to withstand high pressure without cracking, warping, or deforming. Functional Design: Magnetic Quick Release: Uses nickel-plated N52 Neodymium magnets to create a secure, vibration-proof connection that allows the enclosure to be removed "in a snap" without tools. Airtight Seal: The magnetic terminals are designed to prevent air leaks, and the unit comes with a pre-installed cork gasket for a reliable mount. Premium Internals: Equipped with 5ft of Dual 10ga 100% OFC speaker wire for maximum conductivity. High-Capacity Blocks: Features 1/2" Aluminum or Copper terminal blocks with 5/16" x 18 set screws, capable of accepting up to 8ga wire. Technical Specifications: Material: CNC Milled 3/4" HDPE Magnet Grade: N52 Neodymium Wire Specs: 5ft 10ga 100% OFC (Fits up to 8ga) Dimensions: 3.825" x 3.825" x 1" (LxWxH) Origin: Made in California, USA Warranty: Lifetime Warranty
$157.29
-
SMD 2CHCOP 2 Channel Terminal Cup Copper Black
SMD 2-Channel Heavy Duty Terminal Cup (Copper Black) The SMD 2CHCOP is a high-strength alternative to standard injection-molded terminal cups. Milled from 3/4" HDPE, this terminal cup is designed to withstand extreme enclosure pressure without breaking, leaking, or deforming. Its durable construction allows it to be reused across multiple enclosure builds over time. Key Features: Heavy-Duty Construction: Precision-milled from 3/4" HDPE with a 1/2" body and 1/4" flange for maximum structural integrity. Corrosion-Resistant Hardware: Utilizes 28 pieces of stainless steel hardware to ensure long-term durability and reliable conductivity. Secure Terminals: Features 5/16" bolt terminals compatible with standard ring terminals. High-Pressure Reliability: Engineered to remain airtight and structurally sound under the most demanding subwoofer box pressures. Technical Specifications: Model: 2CHCOP Material: 3/4" Milled HDPE Hardware Type: Stainless Steel Terminal Size: 5/16" Bolt Dimensions: 4.625" x 5.857" x 1.5" (LxWxH) Origin: Made in the USA
$67.09
-
SMD 4CHG8 4 Channel Terminal Cup Grade 8 Black
SMD 4-Channel Heavy Duty Terminal Cup (Grade 8 Black) The SMD 4CHG8 provides a high-strength, multi-channel solution for complex speaker enclosures. Precision-milled from 3/4" HDPE, this 4-channel terminal cup is designed to maintain an airtight seal and structural integrity under extreme internal air pressure, offering a significant upgrade over standard plastic terminals. Key Features: 4-Channel Configuration: Allows for organized wiring of multiple coils or drivers through a single centralized location. Milled HDPE Construction: Features a 1/2" body and 1/4" flange milled from solid 3/4" HDPE to prevent cracking or leaking. Grade 8 Hardware: Equipped with high-strength Grade 8 hardware for maximum durability and secure electrical contact. Industrial Terminals: Uses 5/16" bolt terminals compatible with standard heavy-duty ring terminals. Reusable Performance: The rugged design allows the terminal cup to be removed and reinstalled in new enclosures as your system evolves. Technical Specifications: Model: 4CHG8 Material: 3/4" Milled HDPE Hardware Type: Grade 8 Steel Terminal Size: 5/16" Bolt Dimensions: 4.82" x 10.187" x 1.5" (LxWxH) Origin: Made in the USA
$42.89
-
XS Power XS Power TB-606v2 Billet Battery Terminal Block
600 Series Aluminum Terminal Blocks, 1/0, 6 Spots, M6/M8 Bolts, Pair
$89.99
-
$29.99
-
XS Power XS Power 558 Battery Post Adaptor
I-BAR 1200 Brass Adaptors - Allows fitment of I-BAR accessories.
$29.99
