Jake Fuller
-
Sundown Audio Sundown Audio SA-6.5CX 6.5" Coaxial Speakers
120 watts RMS Silk dome tweeter Hybrid fiber cone Adjustable crossover - midrange and tweeter Cast aluminum frame Magnet ID shorting ring (midrange) Machined aluminum tweeter housing High-compliance rubber surround 2.75" DEPTH Sundown’s premiere sound quality separates, the SA-6.5CS is a marvel of design and top-tier components. The midrange features a high-quality cast aluminum basket, housing a cone with a carefully selected blend of paper and wool fibers. This design dampens any unwanted resonances for an incredibly smooth, detailed response. The surround is a high-compliance rubber, engineered to tame edge resonances within the cone. An FEA-optimized motor was designed in-house, and features a full 6mm one-way linear excursion - thanks to a carefully designed motor and extended pole piece. To increase thermal performance, the SA midrange features a vented magnetic gap and vented voice coil collar. The SA series silk dome tweeter matches the smooth sound of the midrange. A result of extensive testing, Sundown optimized the tweeter’s gap, dome material, lens, and chamber damping material. The results speak for themselves. The separates feature a 12 dB network centered at 3800 Hz, with high quality air core inductors and Mylar capacitors. Change the midrange low pass filter to your acoustic tastes from a 12dB, to 6dB, to a bypassed slope. The tweeter's response is also customizable, ranging from 0, to -3, to -6 dB levels. The SA separates were engineered for one, simple goal: to let you completely immerse yourself in the music. At any volume. For as long as you want.
$199.99
-
Sundown Audio Full Tilt Audio 100% OFC Big 3 Upgrade Kits
Available In Multiple ColorsWeight Lbs. – 4Weight Kgs. – 1.81Length – 9 inHeight – 10 inWidth – 2.5 inKit Contents1qty - 6ft 0AWG Full Tilt OFC Cable2qty - 4ft 0AWG Full Tilt OFC Ground Cable8qty - Full Tilt Brand Heat Shrink8qty - 0AWG Crimp Terminals10qty - Wire Clamps10qty - Zip Ties10qty - Screws
$99.99
-
Sundown Audio Sundown Audio NeoPro-10 v.4 10" Pro Audio Midrange Speaker
Power Handling: 150W-340W Watts RMS 4 or 8 Ohms Carbon fiber cone Neodymium motor Spring loaded terminals Sold Individually Neo motors and carbon fiber cones – there’s nothing better! Made specifically for car audio PA systems, we chose a carbon-fiber cone to handle high SPL systems without breakup, then joined it with a vented, high strength neodymium motor to deliver amazing volume and clarity.
$249.99
-
Sundown Audio Sundown Audio ET-1R Super Tweeter
Power handling: 100 Watts RMS Impedance: 4 or 8 ohms Frequency range: 4kHz - 20kHz Sensitivity: 105dB Sold Individually Handling 100 watts and only 1.67 inches deep, the BT-R1 is the choice when you want to cut through bass like a hot knife through butter. We incorporated our highest sensitivity (105dB) and biggest diaphragm (33.5mm) into this super tweeter to make the most out of every watt you give it. Measurements Download
$44.99
-
Sundown Audio Sundown Audio LCMR-6.5 100 Watt Pro Audio Midrange Speaker
Features Sold Individually Power Handling: 100 Watts RMS Impedance: 4/8 Ohm Frequency Range: 120Hz - 6kHz Phase Plug Outer Diameter: 6.51" Cutout Diameter: 5.82" Mounting Depth: 3.50" VC Diamete: 1.51" Magnet Material: Ferrite Effective surface area,Sd: 12.469*
$59.99
-
Sundown Audio Sundown Audio SHFTL 2" Throat Super Horn With Ferrite Magnet
3in Horn driver Strontium Ferrite Magnet Die-cast Aluminium Cover Die-cast Aluminium Horn Titanium Diaphragm 4 Ohm 110 Wrms Exit Throat Diameter @ inch – 2 Rated Impedance @Ohm – 4 Power Handling Capacity @ Watt – 110 Program Power @Watt – 220 Sensitivity(1W/1m) @ Hz – 118 Frequency Range @ Hz - 600-20,000 Voice Coil Diameter @ inch - 3 Voice Coil Material - CCAW Voice Coil Former Material - Kapton Voice Coil Winding Depth @ mm - 3 Cutout – 6.75” Mounting Depth – 9.65” Gap Height @ mm – 3.5 Driver Size @ in 6.7*3” Back Cover Material – Die-cast Aluminium Diaphragm Material - Titanium Horn Material – Die-cast Aluminium Product Dimension @ in – L9.5*W9.5*H10” Key Features: Powerful Performance: Rated at 110W RMS and 220W program power, it handles demanding audio requirements with ease. Wide Frequency Range: Covers 600Hz to 20,000Hz, providing crisp, detailed sound reproduction across mid-to-high frequencies. Exceptional Sensitivity: Sensitivity of 118 dB (1W/1m @ Hz) ensures efficient sound output with reduced power consumption. Robust Construction: Durable Materials: Titanium diaphragm for precision and long-lasting performance. Voice Coil Design: Equipped with a 3-inch CCAW (Copper Clad Aluminum Wire) voice coil on a Kapton former for excellent thermal resistance and durability. High-Quality Build: Die-cast aluminum cover and horn provide lightweight durability and efficient sound dispersion. Magnet: Strontium ferrite magnet ensures strong magnetic flux for reliable operation. Specifications: Exit Throat Diameter: 2 inches Impedance: 4 Ohms Cutout Size: 6.75 inches Mounting Depth: 9.65 inches Driver Size: 6.7 x 3 inches Product Dimensions: 9.5 x 9.5 x 10 inches (L x W x H) Additional Details: Voice Coil Winding Depth: 3 mm Gap Height: 3.5 mm Materials: Titanium diaphragm, Kapton former, and die-cast aluminum construction for maximum durability and performance.
$149.99
-
Sundown Audio Sundown Audio SA-6.5CS v.3 6.5" 6-1/2 Component Car Audio Speakers+Tweeters
When Sundown set out to design the "SA" series component they knew it had to be something special; something to uphold the reputation of the SA series subwoofer line. But at the same time the price had to remain reasonable; something that almost anyone can afford.The SA component set starts out with its custom designed midrange driver. The mid features a high quality cast aluminum basket as its starting point; where many speakers in this category go with cheaper stamped steel frames. The cone is a carefully selected blend of paper and wool fibers designed to damp any unwanted resonances. The dust cap is a soft poly whose size, shape, and material were all chosen to create the least amount of breakup and distortion as possible. The surround is a very compliant rubber that helps to tame any remaining edge resonances within the cone. With any midrange the cone, surround, and dust cap are CRITICAL to the sound. When designing the SA set we had no concern for fancy cosmetics or other "audio jewelry" The motor was FEA optimized in-house to increase linear excursion and features a full 6mm one-way linear excursion thanks to a carefully designed motor and extended pole piece. We also thoroughly considered thermal performance in the design with the SA mid featuring a vented magnetic gap and a vented voice coil collar. The 60-watt per side power rating on the SA mid is derived from a full 8-hour test on pink noise (full bandwidth down to 20 Hz) -- so when crossed over on the bottom-end this figure ends up being VERY conservative. Most customers use 100+ watt RMS amplifiers on the SA sets. The SA series tweeter had to match the smooth sound of the midrange so we went with a silk dome. We tested numerous versions, tweaked the gap, dome material, tested various lenses, various chamber damping materials, so on and so forth until arriving at the final design. As the response graph is proof of the result is an incredibly smooth sounding tweeter. Don't be fooled by the simple housing -- as we are all taught not to judge a book by its cover and you will find this tweeter performs as good or better than many fancier looking counterparts. We stuck with the Sundown mentality of not spending money where it doesn't increase performance. The crossover is also relatively simple looking at first glance but it does the job perfectly. It is a 12 dB network centered at 3800 Hz with high quality air core inductors and Mylar capacitors. It also features the ability to change the LPF on the mid from a 12dB, to 6dB, to a bypassed slope as well as to adjust the tweeter from 0, to -3, to -6 dB levels. We are confident that anyone who is after a smooth sounding set will be incredibly pleased with the SA component line. Reviews have been overwhelmingly positive on them from all over the globe. If you are a metal or hard dome tweeter fan it may not be your set but we will develop a "sharper" sounding set down the line! Features & Specifications 6.5" Component Speakers System 125 Watts / Side Silk Dome Tweeter Machine Aluminum Tweeter Housing Case Aluminum Frame Magnet ID Shorting Ring (Midrange) Carbon Fiber Cone Rubber Surround 24dB/Octave Crossover Adjustable Tweeter Level (-3, 0, +3) Mounting Depth: 2.87" Cutout: 5.63"
$399.99
-
Sundown Audio Sundown Audio ECX-6.5 6.5" 6-1/2 Pro Sound Coaxial Speakers
Features Sold Individually Power Handling: 50 Watts RMS Impedance: 4 ohms Frequency Range: 80Hz - 20kHz Sensitivity: 94dB
$59.99
-
Sundown Audio Sundown Audio SA-Series v.2 15" Subwoofer
1250 Watts RMS / 2500 Watts Peak Dual 2 or 4 ohm voice coils Vented magnetic gap & pole piece Aluminum 2.75” voice coil former for superior heat dissipation Innovative high velocity, cast aluminum vented frame spacer ring Magnet ID faraday ring for smooth acoustic response High-temperature copper voice coil wire Spring-loaded terminals Stitched-on double “XL” tinsel leads This SA-10/12/15 v.2 series is a top-down upgrade from the original SA series. The 2.75” coil punches way above its weight, outperforming many 3” coils without the adding weight & with the added advantage of a wider spider. We are able to perfectly balance the mass, motor force, and suspension stiffness for the intended power level.The motor also features a large magnet shorting ring (faraday ring) to reduce distortion and deliver smoother response across the entire acoustic spectrum. The motor & coil setup is mated to an extremely robust multi-layer spider with fully tied-on & doubled-up “XL” tinsel leads. A competition-grade paper cone, strong foam surround, and cast aluminum frame are used to complete this masterpiece. On top of the ~19mm of one-way linear excursion we have an x-mech limit of 37mm one-way before coil bottom making it nearly "bottomless."The 18" model features a larger diameter motor to drive the higher mass. Enclosure Designs .Zip File
$409.99
-
Sundown Audio Sundown Audio SHFST 2" Throat Super Horn With Ferrite Magnet
2in Horn driver Strontium Ferrite Magnet Die-cast Aluminium Cover Die-cast Aluminium Horn Titanium Diaphragm 4 Ohm 80 Wrms Exit Throat Diameter @ inch – 2 Rated Impedance @Ohm – 4 Power Handling Capacity @ Watt – 80 Program Power @Watt – 160 Sensitivity(1W/1m) @ Hz – 115 Frequency Range @ Hz – 1,000-20,000 Voice Coil Diameter @ inch - 2 Voice Coil Material - CCAW Voice Coil Former Material - Kapton Voice Coil Winding Depth @ mm - 2 Cutout – 5.5” Mounting Depth – 5.15” Gap Height @ mm – 2.5 Driver Size @ in 5.28*2.5” Back Cover Material – Die-cast Aluminium Diaphragm Material - Titanium Horn Material – Die-cast Aluminium Product Dimension @ in – L6.75*W6.75*H5.5” Key Features: Efficient Power Handling: Rated at 80W RMS and 160W program power, this driver offers a balance of power and performance for demanding setups. Wide Frequency Range: Covers frequencies from 1,000Hz to 20,000Hz, ensuring crisp and detailed sound. High Sensitivity: A sensitivity of 115 dB (1W/1m @ Hz) delivers excellent output with minimal power consumption. Durable Construction: Diaphragm Material: Titanium diaphragm for reliable performance and precise audio reproduction. Voice Coil Design: 2-inch CCAW (Copper Clad Aluminum Wire) voice coil on a Kapton former provides thermal stability and durability. Robust Build: Die-cast aluminum cover and horn for lightweight strength and effective sound dispersion. Magnet: Strontium ferrite magnet ensures high magnetic flux and long-lasting reliability. Specifications: Exit Throat Diameter: 2 inches Impedance: 4 Ohms Cutout Size: 5.5 inches Mounting Depth: 5.15 inches Driver Size: 5.28 x 2.5 inches Product Dimensions: 6.75 x 6.75 x 5.5 inches (L x W x H) Additional Details: Voice Coil Winding Depth: 2 mm Gap Height: 2.5 mm Materials: Titanium diaphragm, Kapton former, and die-cast aluminum components provide durability and optimized performance.
$99.99
-
Sundown Audio Sundown Audio E-5.25CX 5.25" Coaxial Speakers
50W RMS Black polypropylene cone UV-resistant rubber surround High-performance titanium dome tweeter Rubber tweeter stalk ring for weather and dust resistance Black stamped steel basket with perimeter venting Sold as pairs Grilles included 2.5" Mounting depth Sundown’s constant innovation continues in the affordable E-Series coaxial speakers. Designed for audiophiles and enthusiasts alike, these speakers give you crisp highs, rich mids, and deep, impactful bass as only the kings of the SPL lanes can deliver.Using a titanium tweeter and tough polypropylene cone, the E-Series drivers use a damped titanium tweeter for smooth response, without the harshness of most metal drivers. An ultra smooth sounding polypropylene cone is mated to the cone with a rubber surround, helping to provide extremely linear excursion. A rubber sealing ring was added to the tweeter stalk, preventing dust and moisture from interfering with motor movement. The steel frame is custom tooled and vented for outstanding thermal control, so you can play it long and play it loud!
$99.99
-
Sundown Audio Sundown Audio SHNMD 2" Throat NEO Super Horn
SHNMD 2" Throat Super Horn With NEO Magnet 2in Horn driver NEO Magnet Die-cast Aluminium Cover Die-cast Aluminium Horn Titanium Diaphragm 4 Ohm 110 Wrms Exit Throat Diameter @ inch – 2 Rated Impedance @Ohm – 4 Power Handling Capacity @ Watt – 110 Program Power @Watt – 220 Sensitivity(1W/1m) @ Hz – 120 Frequency Range @ Hz - 600-20,000 Voice Coil Diameter @ inch - 3 Voice Coil Material - CCAR Voice Coil Former Material - Kapton Voice Coil Winding Depth @ mm - 3 Cutout – 6” Mounting Depth – 6.8” Gap Height @ mm – 3.5 Magnet Type - Neodymium Driver Size @ in 4.9*2.18” Back Cover Material – Die-cast Aluminium Diaphragm Material - Titanium Horn Material – Die-cast Aluminium Product Dimension @ in - L7.25*W7.25*H7.19” Key Features: Powerful Output: Rated at 110W RMS and 220W program power, this driver provides robust sound performance suitable for demanding audio setups. Wide Frequency Range: Operates efficiently across 600Hz to 20,000Hz, ensuring clear and dynamic audio reproduction from mid to high frequencies. High Sensitivity: With a sensitivity of 120 dB (1W/1m @ Hz), it minimizes power consumption while delivering maximum sound output. Premium Build: Diaphragm Material: Titanium diaphragm ensures durability and accurate sound reproduction. Voice Coil: Features a 3-inch CCAR (Copper Clad Aluminum Ribbon) voice coil on a Kapton former for excellent thermal and mechanical stability. Horn and Back Cover: Constructed with die-cast aluminum for lightweight strength and enhanced sound dispersion. Magnet Type: Equipped with a Neodymium magnet for high magnetic flux and reduced weight. Specifications: Exit Throat Diameter: 2 inches Impedance: 4 Ohms Cutout Size: 6 inches Mounting Depth: 6.8 inches Driver Size: 4.9 x 2.18 inches Product Dimensions: 7.25 x 7.25 x 7.19 inches (L x W x H) Additional Details: Voice Coil Winding Depth: 3 mm Gap Height: 3.5 mm Materials: Die-cast aluminum components, Kapton former, and titanium diaphragm for a robust and reliable build.
$199.99
