All Products
-
Sundown Audio SA-Series Drop-In Kit
These are standard drop-in recone kits ONLY. If you need a custom recone kit, you will still need to call us to place your order.There are no refunds or exchanges with drop-in re-cone kits. Please make sure you are ordering the correct model, version and impedance prior to ordering.
$99.99 - $199.99
-
Sundown Audio Sundown Audio NeoPro-10 v.4 10" Pro Audio Midrange Speaker
Power Handling: 150W-340W Watts RMS 4 or 8 Ohms Carbon fiber cone Neodymium motor Spring loaded terminals Sold Individually Neo motors and carbon fiber cones – there’s nothing better! Made specifically for car audio PA systems, we chose a carbon-fiber cone to handle high SPL systems without breakup, then joined it with a vented, high strength neodymium motor to deliver amazing volume and clarity.
$249.99
-
Sundown Audio Sundown Audio ET-1R Super Tweeter
Power handling: 100 Watts RMS Impedance: 4 or 8 ohms Frequency range: 4kHz - 20kHz Sensitivity: 105dB Sold Individually Handling 100 watts and only 1.67 inches deep, the BT-R1 is the choice when you want to cut through bass like a hot knife through butter. We incorporated our highest sensitivity (105dB) and biggest diaphragm (33.5mm) into this super tweeter to make the most out of every watt you give it. Measurements Download
$44.99
-
Clearance Deals Orion Cobalt CT-T15 PAIR of 1" 300 Watt 4-Ohm Flush-Mount Car Audio Tweeters
Features & Specifications:Mylar Diaphgram Neodymium Magnet Ferro-Fluid Cooled Voice Coil High Temperature Abs Housings Complete With Flush And Surface Mount Hardware 30w Rms / 300w Max Music Power Frequency Response: 1.5khz ~ 30khz Sensitivity: 90.7db/W/M 4 Ohms Impedance Orion CT-T15 Cobalt Series 300 Watts Max Power Car Audio Tweeters
$29.99 $19.99
-
Tsunami Tsunami RTP9.9-Y1 Nickel Plated Y-Adapter (1) Female to (2) Male RCA
Tsunami RTP9.9-Y1 RCA "Y" Adapters Nickel- 1 Female to 2 Male Split Tip and Outer Ring 6" Length
$9.49
-
Clearance Deals McLaren Audio MLT4C Titanium Tweeter, 300W Max, 8Ohms
MLT-4C Titanium tweeter MLT-4C Titanium Diaphragm Tweeter. SPL: 112 dB Freq response : 3KHz - 22KHz 100 wts rms , 200 wts peak. Y35 ferrite magnet Dimensions: 4" and 2 9/16" depth Cut out: UPC 811884020318
$43.95 $29.99
-
Down4Sound Down4Sound JP63 | 6300 WATT RMS Class D Amplifier
JP 63 Amplifier: 6300W PLUS RMS MONOBLOCK Amplifier We introduce the JP-63 , the 6300 WATT RMS (PLUS WAY more if you have a solid electrical) monoblock amplifier. It's like an 6k (6000 WATT) amplifier just with WAY more power. This 6000 watt amp is great for a serious basshead looking to bang some monterous , storm stomping bass out of their subwoofer.. REMEMBER, This isn't your typical 6000 WATT plus amplifier, we upgraded the input to 3 power and grounds, added the best RCA's true tiffany, the internal fan now stays on as soon as you turn on the amplifier to keep it cooler longer. The color is Clearwater Turquoise. This 6000 plus watt amplifier MUST HAVE an ELECTRICAL UPGRADED INSTALLED, OR NO WARRANTY. THIS MEANS YOU NEED A BIG 3, UPGRADED ALT, AND RESERVE BATTERY(s) to support this amplifier and any others you may have in your setup. If you do not have the proper electrical before installing this amplifier, you will not have a warranty. Our Ratings on Power for the JP63: 1-ohm rating: 6300 WATTS RMS 2-ohm rating: 4300 WATTS RMS 4-ohm rating: 2300 WATTS RMS Other Specifications on the JP63: Frequency response : 14Hz –269Hz Signal to noise : 91dB Damping factor : 480 < Efficiency at 4ohm : 97% Input sensitivity : 6V –0.2V Subsonic filter : 10Hz –50Hz Low pass filter : 35Hz –250Hz Phase : 0 –180 degree Strappable connection Working to half ohm in speaker connection Clipping indicator Fusing: 700A TOTAL | 250A for each positive wire (3x) BT Remote control with Voltage and Temperature display, Clipping indicator. C type power connection for BT remote 4 ga speaker output 3 x 0ga power inputs Operating voltage : 9 to 16 Volts. Dimensions : 19.68 INCHES (L) x 9.37 INCHES (W) x 2.64 INCHES (H) MADE IN SOUTH KOREA
$999.99
-
ILL Customz ILL Customz Input Style 6-Spot SAE Battery Terminals
ILL Customz SAE Battery Terminals are made for batteries that have SAE Top Post terminals. Whether your battery is stock or aftermarket, the Ill Customz SAE battery terminals are the perfect match. Great for marine, off-road, and audio use Comes in pairs (one positive, one negative) Made from Nickel Plated 6061 aluminum Works with 1/0AWG welding cable, 2/0AWG welding cable, and oversized 1/0AWG wire ONLY WORKS WITH TAPERED SAE POST (top post) Engraved logo
$44.99
-
Kicker Kicker 47KSC6804 6" x 8" 6x8 75W 2-Way Coaxial Car Audio Speakers KSC KS
KICKER’s elite KS-Series Coaxial Speakers upgrade your audio to new levels of accuracy with extended frequency response and the smoothest highs. Potent Performance KICKER KS-Series Speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. Internally dampened polypropylene cones and durable rubber surrounds assist the woofers in creating precise midrange and midbass, while high-quality silk-dome tweeters deliver natural, detailed highs. With less than a 2.5-inch mounting depth and zero tweeter protrusion, the KSC680 is a perfect fit in almost every vehicle on the road today, including 5 x 7-inch speaker holes. They work best with 15 to 75 watts of recommended power. See below for more details. High power handling Silk-dome tweeters for a smooth sound Polypropylene woofer and tough rubber surrounds Thin-mount design easily fits behind factory grilles Specifications Speaker Design 2-Way Woofer [in, mm] 6 x 8, 160 x 200 Tweeter [in, mm] ¾, 20 Rated Impedance [Ω] 4 Recommended Amplifier Power [Watts RMS] 15-75 Sensitivity [1W, 1m] 90 Frequency Response [Hz] 45-21k Mounting Hole Diameter [in, mm] 5 x 7-3/16, 127 x 182 Top Mount Depth [in, mm] 2-1/4, 58 Bottom Mount Depth [in,mm] 2-5/8, 67 Tweeter Protrusion [in,mm] 1/16, 2 Grilles No Tweeter Magnet Material Neodymium Tweeter Dome Material Silk Woofer Cone Material Polypropylene Woofer Surround Material Rubber
$129.95 $89.99
-
Kicker Kicker 46CSC654 6.5" 6-1/2 300W 4-Ohm 2-Way Coaxial Speakers CSC65 CS
CS Series CSC65 The CS Series delivers remarkable performance and ultra-clean bass, utilizing a heavy-duty motor/magnet structure featuring EVC™ (Extended Voice Coil) technology not found in stock speakers. They use polypropylene cones with tough, ribbed, UV-treated surrounds for precise linear excursion and reliability. CS Series CSC65 CS-Series 6-1/2-inch Coaxial Speakers are the perfect way to upgrade your factory speakers. CS-Series Coaxials deliver remarkable performance and ultra-clean bass with a heavy-duty motor/magnet structure not found in stock speakers. The stamped-steel framework supports a rigid polypropylene cone with EVC™ (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles. These CS speakers work best with 100 watts of recommended power. See below for more details. Fits nearly every car made Zero-protrusion tweeters to fit nearly any factory depth Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion UV-treated poly-foam surround resists heat or direct sunlight Large woofer magnet in a heavy-duty motor for ultra-clean bass PEI-tweeter construction provides superb clarity Neodymium tweeter magnets allow for increased volume in high frequencies Steel mesh grilles included for speaker protection Specifications Speaker Design 2 - way Woofer Size | in [mm] 6 1/2 [160] Tweeter Size | in [mm] 1/2 [13] DC Resistance | ohm 3.3 Peak Power | Watts 300 Continuous Power | Watts, RMS 100 Sensitivity [SPLo] | dB @ 1W, 1m 90 Effective Frequency Range | Hz 40-20k Mounting Hole Diameter | in [mm] 4 13/16 [123] Top Mount Depth | in [mm] 3/8 [9] Bottom Mount Depth | in [mm] 1 11/16 [43] Tweeter Protrusion | in [mm] 0 Grilles Yes Tweeter Magnet Material Neodymium Tweeter Dome Materia PEI [polyether imide Tweeter Design Balanced dome Woofer Cone Material Polypropylene Woofer Surround Material Polyester foam
$119.99 $99.99
-
Kicker Kicker 44CVX122 12" 1500W Dual-2-Ohm CompVX CVX Subwoofer/Sub CVX12
12" Kicker CompVX 2 Ohm The CompVX™ stands alone among round subwoofers, using all of the exclusive Solo-Baric® L7 design and performance features except the square shape. 12" CompVX 2 Ohm The cast aluminum basket comes with a motor-cooling perimeter venting and spring-loaded terminals that can accept up to 10-gauge wire, so when you run tons of power to this sub, it gives you loud, distortion-free bass all day long. Features: Dual Two-Ohm Voice Coils Thick Polypropylene Cone Signature Double Blue Surround Stitching Ribbed Santoprene® Surround SoloKon™ Cone Reinforcement Oversized Suspension System High-Strength Insulated Tinsel Leads High Temp Voice Coil Perimeter Venting for Thermal Management Massive Ceramic Magnet UniPlate™ Extended Pole Piece & Backplate For Superior Heat Dissipation Cast Aluminum Basket Satin Nickel Spring-Loaded Speaker Terminals Want setup help? Go to KICKERU for a free woofer & amplifier configuration app! *The CompVX 12-Inch Subwoofer works best with a sealed or ported enclosure and 750 watts of recommended power. See below for more details. Specifications Thiele/Small Parameters 44CVX122 T/S Parameters PDF Size (IN.,CM) 12, 30 Impedance (OHMS) 2 DVC Max Rec Amplifier Power (WATTS PEAK/RMS)* 1500/750 Sensitivity (dB 1w/1m) 87.1 Frequency Response (Hz) 20-500 Mounting Depth (in, cm) 6-11/16, 16.9 Mounting Cutout (in, cm) 11-1/16, 28 Min Sealed Box Vol (cu. ft, L) 1.0, 28.3 Max Sealed Box Vol (cu. ft, L) 4.6, 130 Min Vented Box Vol (cu. ft, L) 1.75, 49.6 Max Vented Box Vol (cu. ft, L) 2.25, 63.7 What's in the box? one 12-inch subwoofer, one owner's manual, two stickers *Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details. **Port Volume Excluded. Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.
$279.99 $199.99
-
sbc cock box SBC Cock Box 1 In 8 Out Plastic RCA Distribution Box
*SBC RCA Distribution Blocks are built to order, build time is roughly 10-14 days* SBC (Scott Bowman Customs) Cock Box is cleanest and easier way to make your RCAs look clean like some the best installers! The RCA signal distribution box provides you with the absolute best RCA splitter solution with solid RCA connections to ensure you won't be looking that needed voltage for your stereo. Size: 1 In - 8 Out
$120.00
-
PRV Audio PRV Audio 6MB200 6-1/2" 8-Ohm Car Pro Audio Midbass Speaker MID
Features The PRV Pro Audio Loudspeaker, 6MB200 mid bass woofer, offers outstanding durability and a smooth punch of mid bass for small enclosures. This woofer is perfect for home Hi-Fi installs, including bookshelf, satellite, surround sound speakers and even home studio monitors. The 6MB200 offers very smooth mid range response, up to 4.5 kHz, and is a perfect option for mid range driver replacements in three-way cabinets. The magnet and motor assembly are attached to a sturdy reinforced steel frame, ensuring a solid support structure and long lasting play in most any environment. Its light weight of only 3.3 Lbs helps to keep your enclosures light, making it perfect for car audio applications. Highlights Nominal Impedance: 8 Ohms Rated AES Power Handling (RMS): 100 Watts Program Power: 200 Watts Sensitivity (1W/1m): 93 dB Voice Coil Diameter: 1.5″
$29.99
-
Surprise Me! By Showtime Electronics
Want to upgrade your sound system but love a good surprise? Surprise Me is the easiest (and most exciting) way to get premium car audio gear—while getting more value than you expect. What is it?Choose a price tier, and we’ll send you a curated selection of car audio products worth at least that amount—often more! What you might receive: Speakers Subwoofers Amplifiers Bass knobs & control accessories Wiring kits, cables, and install gear Sundown Yardsale - (Used Or Refurbished Competition Gear) Other car audio accessories Why you’ll love it: Guaranteed value: Receive equal or greater value than what you pay Top brands: Products sourced from 30+ trusted car audio brands Perfect for upgrades: Great way to enhance your system or start fresh Fun & exciting: Every box is a surprise—no two are the same Hand-picked gear: Carefully selected by audio experts How it works: Choose your price tier Place your order Unbox your surprise and enjoy the upgrade Have fun and let us surprise you with your next car audio upgrade!
$99.99 - $1,999.99
-
AUDIO ACE JOKER 15" V4 DUAL 2 OHM SUBWOOFER
Product Overview: The High-Performing Crowd-Pleaser Don’t let the name fool you! The Audio Ace Joker 15" V4 D2 is NO JOKE and is one of Audio Ace’s most popular subwoofers. This 15-inch driver is rated at a very conservative 1,000W RMS, designed to outperform expectations with its wide roll surround, high-temperature 3-inch 4-layer epoxy voice coil, and high-efficiency 168oz FEA Optimized Magnet Motor. The Dual 2 Ohm impedance provides flexible wiring for a 1 Ohm or 4 Ohm final load. The Joker is versatile, performing great in Sealed, Ported, and Bandpass enclosures. AUDIO ACE JOKER 15" V4 DUAL 2 OHM SPECIFICATIONS Size 15 Inch RMS Power Handling (Conservative) 1,000 Watts Nominal Impedance Dual 2 Ohm (D2) Voice Coil 3 Inch 4 Layer Epoxy High Temp Motor Weight 168 oz (FEA Optimized) Surround Wide Roll Surround Mounting Depth 7.75 Inches Cutout Diameter 13.819 Inches LOSS FACTORS & MISC PARAMETERS Total Q (Qts) 0.499 Mechanical Q (Qms) 4.821 Electrical Q (Qes) 0.557 Free Air Resonance (Fs) 26.8 Hz Sensitivity (Lm) 85.70 dB Equivalent Volume (Vas) 67.0709 L Moving Mass (Mms) 450.600 g BL Factor (Bl) 22.884
$279.00
-
Sundown Audio Sundown Audio U-Series v.1 12" Subwoofer
The Sundown U Series is our premier “standard suspension” woofer series. It is the most direct replacement for the world famous Z v.3 woofer line which we produced from 2011 to 2016 before launching the “new platform” Z v.4 series. Due to numerous advancements in our design process the U Series is able to deliver performance on-par with the Z v.3 series but at a much lower cost. We start with a double-stacked / 8.66” wide Y35 grade ferrite magnet system coupled to a one-piece, bumped T-Yoke and a 0.6” thick top-plate. Just as with the Z v.3 before it and our other high-end subwoofers we also add a very thick (5mm thickness) aluminum shorting ring inside the magnets to reduce static inductance and level out inductance over stroke. The U series motor also features a 0.6” long pole-extension to keep the coil under control at high levels of excursion. The voice coil is a 2.36” long / 3” diameter 4-layer aluminum winding / aluminum former unit – which is the same coil we use in our X v.2 series and, thus, the U series has the same 1500-watt RMS ratings. The coil temperature is kept in check by a heavily smoothed / high-velocity pole-vent and a series of ten direct air-gap vents in the back plate. The U series also features newly tooled cast aluminum vent rings in between the frame and top plate to effectively exchange air at a high velocity over the voice coil beneath the spider landing. The U series features an all-new cast aluminum frame series to the Sundown line which allows for taller cones than the older frames used on the Z v.3 series. The taller cones provide enhanced coil stability and increased mechanical excursion capability. We also tooled matching cast-aluminum surround clamps for the U series to ensure durability in the most demanding situations. The surrounds and cone bodies have been fully custom tooled especially for the U series and are stronger / support more excursion than the Z v.3 series cones and surrounds. The new cone bodies also feature an indentation for the same wide-flange, ultra-strong dust caps as our new platform subwoofers. If you are looking for a woofer that sounds similar to the SA series but handles significantly more power… the U series is exactly what you need. It has been designed to live up to the reputation earned by our Z v.3 series both in terms of every-day music enjoyment and SPL competition. Specifications Black Aluminum 3” voice coil former for superior heat dissipation High Temperature Round-Wire CCAW voice coil with high-temp black adhesive Double stitched surround Heavy duty cast basket Spring loaded terminals accept up to 8 gauge Stitched-on double-XL tinsel leads Rear vented pole piece Rear drilled gap-venting Innovative high-velocity cast aluminum vented frame spacer ring Magnet ID shorting ring Top-Plate Cooling Channels Cast Aluminum surround bolt-on rings Optimized for small ported or bandpass enclosures Specifications T/S SPECS U 12" D2 U 12" D4 RE (Ohms) 3.8 6.1 FS (Hz) 42.2 40.0 VAS (L) 17.9 12.3 Qes 0.30 0.38 Qms 2.67 2.93 Qts 0.27 0.34 Le (mH) 2.41 3.67 BL (NA) 31.2 33.7 Mms (Grams) 290.2 284.5 Cms (uM/N) 0.05 0.06 Sens (dB @ 1w/1m) 88.4db 85.0db Suggested SD-2 10" Sealed 0.5 ft^3 Ported 1.0 ft^3 Displacement 0.11 ft^3 Depth 4.75" Outside Diameter 10 1/2" Cut-Out 9 1/4" Recommended Tuning 32hz Recommended Port Area 16 in^2
$349.99
-
Sundown Audio Stereo Integrity SIQ 75.4 High-Fidelity 4-Channel Amplifier
Stereo Integrity SIQ 75.4 Amplifier: Purity at its Finest for Your Soundstage The Stereo Integrity SIQ 75.4 signals the return of true high-fidelity audio engineering to the mobile sound space. Built by audiophiles for the most discerning listeners, this 4-Channel Class A/B amplifier prioritizes signal integrity above all else. Its core design features zero filters, zero crossovers, and zero EQ, delivering a full bandwidth signal (5 Hz to 150,000 Hz) that is clean, precise, and uncompromised. This is the foundation for an accurate soundstage and breathtaking sonic detail.Uncompromised Audiophile ConstructionEvery component in the SIQ 75.4 was selected for its acoustic performance and durability: Output Transistors: Utilizes audiophile-grade TO-3 output transistors for clean, linear power. Internal Circuitry: Features high-quality UPC4570 op-amps, IRFPO64N power supply transistors, and sand cast resistors throughout. Connections: Equipped with premium Tiffany-style RCA connections accepting inputs up to 16 Volts. Chassis: Protected by a thick extruded aluminum chassis with a copper anodized shielded transformer cover to minimize electromagnetic interference, all visible through a large plexiglass viewing window. Clean Power, Ultra-Low Distortion PerformanceThe SIQ 75.4 delivers precise power with unmatched fidelity, validated by Audio Precision measurements: Rated RMS Power Output (4 Channels): 75W RMS x4 @ 4Ω High Current Output: 120W RMS x4 @ 2Ω Bridged Power: 120W RMS x2 @ 4Ω Total Harmonic Distortion (THD): An ultra-low 0.03 % Signal-to-Noise Ratio (SNR): 90 dB Installation and Specifications Purity Control: Features a discrete gain knob per channel for precise level matching. Dimensions: Compact size at 14 x 8 x 2 Inches. Current Draw: Maximum current draw of 66 amps. The SIQ 75.4 is the ideal solution for audiophiles seeking true sound reproduction for their front and rear stage speakers.Amplifiers Specifications Frequency Response Minimum 5 Hz Frequency Response Maximum 150,000 Hz Signal-to-Noise Ratio (SNR) 90 dB Total Harmonic Distortion (THD) 0.03 % Dimensions (W x H x D) 14 x 8 x 2 Inches Rated RMS power output into all 4 channels at 4 ohm 75 Watts Rated RMS power output into all 4 channels at 2 ohm 120 Watts Bridged RMS power into 2 channels at 4 ohm 120 Watts Power Idle Current Draw 1.2 amps Maximum Current Draw 66 amps Connections RCA Input Maximum 16 Volts
$379.00
-
Sundown Audio Z-Series ZV7 15" Subwoofer
The Z v.7 is the third step up in Sundown's 2025 "ultra-high excursion" sub-woofer lineup after the M and X v.4 series. All models (12,15,18) feature our custom tooled and patented frames (US Patent Numbers D691597, D691598, and D741841) – the Sundown “mega-platform.” Please note – the Z v.7 is not available, aside from special orders, in 10s due to the motor size.We mate these new platform frames to a quad stacked 265mm (10.43”) diameter motor structure with a total magnet stack height of 100mm (3.94”) featuring a hyper-extended pole and extreme clearances (allowing over 4" p-p travel before mechanical bottom effectively making it bottomless). This is, by far, the largest motor we have ever produced on a Z series sub-woofer. The motor force factor (BL^2/RE) is ~50% higher than the previous generation Z v.6 series.This motor drives a 3.3" diameter 4-Layer Round Wire Aluminum Voice Coil wound on a thick aluminum former. These new round wire coils use a special Sundown designed “fat wire” winding method to handle significant amounts of power and abuse.Based on Sundown's years of experience with the Z v.4, 5, and 6 series we've also improved the voice coil ventilation yet again. The Z v.7 features an entirely new and patent-pending airflow directing pole cap, six pole OD channels, SIXTEEN gap vents, and a cross-drilled / slotted top plate to keep the voice coil running cool under extreme conditions.The Z v.7 motor also features a 9mm thick magnet ID Faraday ring which is locked into both the top and back plates. This ring combined with an all-new pole-extension inductance sleeve gives the Z v.7 the most linear inductive performance of any mega-platform sub-woofer to date. As if all of this were not enough to cement the Z v.7as a legend... we were also able to achieve 42mm of one-way linear excursion by 70% BL with an extremely uniform curve via our extensively FEA optimized motor and 95mm long voice-coil winding length.The Z v.7 series was designed from the ground-up to become the new standard in the low-frequency / small, ported box sub-woofer category in this price range. They will work in the same enclosures that are commonly used for Sundown Audio's mega-platform sub-woofers.The Z v.7 series, like its other mega-platform brethren, is really a different kind of woofer due to its incredibly linear suspension. They are designed for the LOWEST level of bass extension possible in a small enclosure while maintaining extremely low levels of distortion.Physical Dimensions: Click Here
$1,364.99
-
Sundown Audio 80mil/190mil Premium Sound Deadener
Sundown Audio Sound Deadener – Premium 80/190mil Acoustic Damping SolutionSilence Isn’t Just Golden—It’s Performance.For those who demand nothing but the best, Sundown Audio delivers with its 80mil / 190mil-rated premium sound deadener—a no-compromise material designed to eliminate resonance, reduce cabin noise, and maximize audio performance. Built using the same proven composition as competition-grade dampening products, this Sundown exclusive takes it further with refined quality control, enhanced adhesion, and the trusted performance only the Sundown name can bring.Crafted for high-end builds and SPL systems where every decibel—and every detail—matters, this material combines dense, soft bitumen with a high-mass layer to stop vibration at the source. Whether you're sealing a trunk for subwoofers or lining a full competition car, this is your foundation for elite sound reproduction.Why Sundown?Because not all deadener is created equal. While others may share a similar formula, only Sundown Audio's variant undergoes enhanced QC, upgraded thermal bonding, and branding that backs performance with reputation. It’s the same concept, executed at a higher level—because that’s what the Sundown name stands for.Product Highlights: Premium 80mil / 190mil density-rated composite Industry-leading acoustic damping power 15 sheets per box (10” x 20”) – covers ~20.8 sq ft Thick 4.0mm build for maximum low-frequency absorption Weight: 34 lbs per box Self-adhesive with Sundown-reinforced backing Color: Matte Black with premium finish Installation Tips:Clean the application surface thoroughly with isopropyl alcohol or a residue-free cleaner. For the best fit, use a heat gun to soften the material and improve flexibility. Press firmly over contours and curves to ensure full contact and long-term performance.
$99.99 - $149.99
-
Sundown Audio Z-Series Z8 8" 4000W Subwoofer Z-8
Small Size. Serious Power. Unmatched Engineering.Don’t let the size fool you — the Z8 Series 8” subwoofer is built to perform well beyond expectations. With an incredible 2000 watts RMS and 4000 watts peak power handling, this compact beast is ready to drop low, hit hard, and take a beating — all while maintaining control and clarity. Designed for high-output systems with limited space, the Z8 offers the same elite-level engineering found in our larger Z Series drivers, packed into an 8-inch frame.This sub is built around a black aluminum 2.75" 4-layer round-winding voice coil with a massive 30mm Xmax, giving it incredible excursion and power handling for its size. Every component is engineered for airflow and cooling: from the optimized high-velocity pole vent to the cast-aluminum vented frame spacer ring and heavily vented magnetic gap. Add in stitched XL tinsel leads, a Mega-Roll v.2 surround, custom spider packs, and a large aluminum Faraday ring, and you’ve got a sub that’s made for real-world abuse and long-term performance.Designed specifically for ported enclosures (sealed not recommended), the Z8 thrives in a 1.0 cu. ft. net enclosure tuned to 32Hz. Whether you’re building a powerhouse daily driver or squeezing competition-level performance into a tight space, the Z8 delivers big bass in a small footprint — no compromises.Features Power Handling:2000 Watts RMS / 4000 Watts Peak Xmax = 30mm Heavily vented magnetic gap Spring Loaded Terminals Optimized high-velocity pole vent Innovative high-velocity cast-aluminum vented frame spacer ring Black aluminum 2.75 inch 4-layer round-winding voice coil sing our proprietary ultra-thick winding method Mega-Roll v.2 surround Custom tooled basket Large aluminum Faraday (shorting) Ring Stitched-On XL Tinsel Leads to prevent fatigue and failure Custom-tooled ultra-linear spider packs
$699.99
-
XS Power XS Power Titan8 PWR-S5 12v Lithium Modular Battery
12 Volt LTO Battery Cranking Amps: 1,000 Max Amps: 2,000 Wattage: 5,000 Amp Hours: 10 Four Inputs Accepts up to 300 Amps of Charging Current Recharges in as Little as 5 Minutes M6 Terminal Hardware Included 8 lbs. XS Power Titan8 lithium batteries are designed for unbeatable cranking power. This Lithium Titanate Oxide (LTO) Series uses a high-power lithium cell that is designed for high-burst output (up to 100 times its capacity) as well as very high-charge current (30 to 60 times its capacity). This translates to a single 10Ah module that can support burst current up to 1,000 amps and can accept 300 amps of continuous charge current.The built-in 2/0 bussing allows up to four positive and four negative hidden direct connections to each module without the need for any externally exposed bussing, while still leaving two easily accessible top terminals and four series or parallel expansion terminals to easily build a bank of nearly any configuration from 12V, 24V, 36V, or any configuration imaginable.Our Modular Titan8 models are not suitable for under-hood use. XS Power Titan8 lithium batteries are also offered in BCI direct fit models that are fully insulated with temperature monitoring built in and are suitable for use in the factory under-hood position. Please check out our BCI models here for under-hood plug-and-play usage.See specifications below.Lithium Titanate Battery Power Modules - Designed for Peak Power
$599.99
-
Sundown Audio SA-1T Tweeter
The all-new 2025 Sundown SA speaker series has been designed to make a statement. What statement, you may ask? That Sundown Audio can be just as serious about SQ as we are about SPL. Many people already know this but our subwoofers – even the ones used for crushing demos – have some of the lowest distortion on the market. We are now bringing our unique approach to the more dedicated Sound Quality market.Starting at the upper end of the frequency spectrum we have the SA-1T Tweeter. The SA-1T features a 25.5mm silk dome (total 38mm including surround) driven by a powerful neodymium motor structure. The dome features a compact, tuned back chamber which helps it to achieve its extremely low FS around 700hz. This gives you an enormous amount of flexibility in choosing the crossover. The tweeter can be used as a 2-way with the 6.5M or the 8M models or as part of a three way with either and the 3M model. In addition to the low FS and smooth response the SA-1T has a very high 92dB sensitivity so it doesn't take much power to get loud enough for just about anyone. The SA-1T is the 4th generation SA tweeter building on the success of the tweeter found in the SA Component sets over three generations.Headed down the spectrum to the midrange we have the SA-3M. This "little" unit is something incredibly special and is a favorite project of lead product designer / founder Jacob Fuller. We really went all-out on this unit to address the "big 3" drivers of distortion. The SA-3M features 4.5mm of one-way linear excursion by 70% BL (with 8mm x-mech thanks to the custom tooled frame – so no bottoming out even on powerful dynamics) and over 6mm by CMS and LE definitions on Klippel. There is essentially NO risk of the driver reaching linearity limits in most applications. The beefy motor structure is a combination of ferrite and a neodymium pole cap magnet to help us reach 84.5dB sensitivity at 1-watt. There is a double LE treatment internal to the motor via both a copper pole sleeve and an aluminum magnet ID shorting ring allowing the SA-3M to play full-range to beyond 20khz (although, for several reasons, we do suggest using a tweeter for the top-end). On the bottom end they can be high-pass crossed over at 300hz effortlessly with 150-watts of power handling (thanks to the 28mm diameter, extra-long voice coil) or even lower if needed, with less power, due to the incredibly high linear stroke. The suspension system, surround and spider, of the SA-3M took over a year of FEA simulations and testing to reach perfection and is just as important as the motor to the resulting low distortion. We gave the suspension just as much attention as we would for a full blown high-stroke subwoofer. To finish off this masterpiece we tested several different types of woven carbon fiber cones & dust caps to achieve the best FR possible.To finish off the 2025 SA speaker line we created the SA-6.5M and the SA-8M. Both of which can be used as a mid-bass or mid-range speaker depending on your application. Both drivers feature the same attention to detail as the 3M regarding the carbon cone and dust cap, surround, and spider. All of these parts were fully FEA simulated and Klippel verified.The SA-6.5M features 5.9mm one-way linear excursion by 70% BL, 7mm by CMS, and 6.28mm by LE on Klippel. Thanks to the efficient motor venting and ample voice coil the power handling is rated for 110-watts full range / 200-watts with a 70hz HPF filter with a respectable 89dB sensitivity. As with the SA-1T this is a 4th generation SA speaker due to the SA component set from prior generations. For this iteration we optimized it further and also created a new custom-tooled frame. The revised frame is more aerodynamics and also allows for superior coil ventilation. As with most Sundown products you will find a thick magnet-ID Faraday ring as well.Last, but absolutely not least, we have the SA-8M which takes linear stroke to yet another level. We were able to achieve 9mm one-way linear by 70% BL and nearly 10mm by CMS and LE standards. As with the 3M, the 8M features a pole sleeve and magnet ID faraday ring for LE treatment. This unit is an absolute powerhouse for mid-bass, and we believe it will make big waves in the SQ world. On the output side it has a 91.5dB sensitivity and will handle 130-watts full-range / 250-watts with a 70Hz HPF thanks to the efficient motor venting and huge 2" coil. The SA-8M is all-in on SQ and output potential – the Sundown way!SA Series, Version 4 1" Soft Dome Tweeter PairSensitivity – 92dB50W RMS @ 3000hz 6dB Crossover50W RMS @ 3000hz 12dB Crossover65W RMS @ 5000hz 12dB Crossover
$149.99
-
315 Custom Audio The Woody Part Dual
Introducing The Woody Bass Knob! Part Dual! When you need more control why not bring two to the party. This bass knob is made out of 100% Baltic Birch and built to last hours of use while enjoying your music. The wood is cut, engraved, and stained for a custom look unmatched in our industry today. Looking for something unique and have a great conversation piece then The Woody is for you! One of the smoothest potentiometers in the game today with 22 gauge 24 inch standard leads. Gable gland for maximum stress relief and high quality tiffany style RCAS this bass knob has it all. Please allow 5 to 7 business days to ship. Most orders are shipped ahead of schedule.
$159.99
-
Sundown Audio Sundown Audio SAEv4-1500.1D Amplifier
1,500 x 1 @ 1 ohms RMS 800 x 1 @ 2 ohms RMS 450 x 1 @ 4 ohms RMS Class D amplifier 12dB variable low pass filter: 40Hz - 180Hz 12dB subsonic filter: 10Hz – 40Hz Phase shift control 0-180 degrees Power, clipping & protection indicators included Heavy aluminum heat sink for improved thermal control Thermal, voltage, speaker short, and dc-offset protection circuitry Wired remote control with clipping indicator The Sundown Audio SAEv4-1500D amp more than just big bass - it's a powerful upgrade for any car audio enthusiast wanting superior sound quality and reliability. This high-performance half-bridge class D amplifier ensures powerful, detailed output. The variable phase, lowpass and subsonic filters provide the control you need - for the sound you love. Featuring robust protection circuitry against thermal, voltage, speaker short, and DC-offset issues, along with power and protection indicators, this amplifier guarantees long-lasting durability, while the heavy aluminum heat sink enhances thermal control, preventing overheating during extended use. The included wired remote with clipping indicator provides real-time monitoring and output control!
$429.99
