All Products
-
Sundown Audio Sundown Audio X-Series v.3 15" Subwoofer
2500 Watts RMS / 5000 Watts Peak Dual 1 or 2 ohm voice coil Made for extremely deep bass Triple-stacked magnet 3” voice coil Hyper-extended pole Built to order Designed with an extended pole piece and an incredible four inches of peak-to-peak excursion, the X v.3 is engineered for ultra-deep bass and high power handling. Engineered to set a new standard in the low-frequency/small-ported-box subwoofer category, the X Series can also work in up to a 50% larger enclosure if you desire even more low-end extension. The X v.3 series differentiates itself with its incredibly linear suspension, ensuring the lowest level of bass extension in a small enclosure while maintaining extremely low levels of distortion. Notably, the v.3 series features a much larger motor structure (220mm vs. 190mm on the V.1 series), improved motor ventilation, and an all-new Mega-Roll v.2 surround, providing a more linear and rugged update to the world-famous Mega-Roll v.1 surround design. Specifications T/S SPECS X V.3 15″ D1 X V.3 15″ D2 RE (Ohms) 1.4 3.2 FS (Hz) 31.418 31.423 VAS (L) 45.907 45.924 Qes 0.486 0.561 Qms 2.562 2.801 Qts 0.409 0.468 Le (mH) BL (NA) 15.518 21.831 Mms (Grams) 423.721 423.436 Cms (uM/N) 60.563 60.585 Sens (dB @ 1w/1m) 86.5dB 85.9dB Xmax 30mm 30mm Enclosure Specifications X v.3 15 Sealed Enclosure N/A Ported Enclosure 4.25 cu ft Recommended Tuning 32hz Recommended Port Area 68 sq in Displacement 0.22 cu ft Depth 11.6" Outside Diam. 15.51" Cutout 13.83" Physical Dimensions Download Enclosure Designs .Zip File
$789.99
-
ILL Customz ILL Customz 1/0 to 4ga Amplifier Inputs
Sold in Pairs These amp inputs will work with all amplifiers that come with 4ga terminals Fits 1/0AWG and 2/0AWG welding cable and oversized 1/0 car audio cable Made from Nickel Plated 6061 aluminum for added corrosion resistance and superior conductivity Comes with free black and red heat shrinks
$19.99 $14.99
-
ILL Customz ILL Customz Dual 1/0 to Single 1/0 Amplifier Inputs
Comes in pairs (one positive, one negative) WILL NOT WORK ON KICKER OR TARAMPS AMPS Works with DC, DD, Sundown, AQ, Crescendo, Ampere, and many more Made from Nickel Plated 6061 aluminum for added corrosion resistance Will accept Oversized 1/0 car audio wire as well as 1/0 and 2/0 welding cable
$22.99 $16.99
-
DS18 DS18 BKVR Remote Level Control With Voltmeter Display Mountable Bass Knob
REMOTE LEVEL CONTROL WITH VOLTMETER DISPLAY
$49.95
-
Sparked Innovations Sparked Innovations Latching Black Push Button Switches
Latching Black Halo Ring 12V Push Button Switch SPDT Universal black aluminum latching push button switch. Use it to turn on lights, amplifiers, actuators, compressors, gauge pods, or any other 12VDC accessory. Illuminates a ring around button head when activated. Can be wired so that the LED illuminates constant or only when the switch is in the on position. Black universal aluminum latching push button switch. Use it to turn on lights, amplifiers, actuators, compressors, gauge pods, or any other 12VDC accessory. Illuminates a ring around button head when activated. Can be wired so that the LED illuminates constant or only when the switch is in the on position. IP67 rated for dust and waterproof up to 1 meter. Can be used in automotive, marine, motorcycle, or industrial applications. Use it with the Sparked Innovations Switch Panel!
$8.00 $7.99
-
315 Custom Audio 315 Customs RCA Distribution Block 1 to 4 - Choose Your Color
Please allow 3 to 5 business days to ship.
$75.00
-
XS Power XS Power TB-608 Billet Battery Terminal Block
Designed exclusively for our xMAX90-DIY, TB-680 allows for 8x bare wire connections on both the positive and negative terminals, allowing you to efficiently extract all the power from xMAX90-DIY. They are sold as a pair and constructed of 600-Series aluminum, allowing for high current capabilities. Included with the terminal blocks are both M6 and M8 bolts, allowing the connection of these terminal blocks to the unit and connection of live wires to your amplifier or other electronics.600 Series Aluminum Terminal Blocks, 1/0, 8 Spots, M6/M8 Bolts, Pair
$99.99
-
Sundown Audio SML-Series 12” Thin Subwoofer
600 Watts RMS/1200 Watts Peak Dual 2 or 4 ohm voice coils Black Aluminum 2.5” voice coil former for superior heat dissipation High temperature 4-layer copper voice coil wire Stitched-on “Mini-XL” tinsel leads to prevent fatigue and failure Vented pole-piece and multi-vented magnetic gap Dual-magnet design for smooth acoustic response Custom tooled cone shape for reduced mechanical noise over high excursion Bolt-through motor design to ensure maximum longevity and ruggedness Introducing the SML series: a revolutionary line of subwoofers by Sundown Audio. This series is an inch shallower than the SLD line, yet delivers nearly the same excursion, making it the ultimate choice for customers in search of an extremely shallow driver with deep bass. Specifically designed to fit under or behind your seat, the SML series excels in performance, especially within small enclosures.
$269.99
-
Sundown Audio Sundown Audio SA-Classic 10" Subwoofer
1000 Watt RMS/ 2000 Watt Peak Dual 2 or 4 ohm voice coils Optimized for small ported, sealed, & band-pass enclosures Large aluminum Faraday ring for smooth acoustic response High strength cast aluminum frame Low distortion motor construction High-temperature voice coil wire Spring-loaded terminals Stitched-on “XL” tinsel lead wires The SA Classic sub is the perfect combination of power handling and deep excursion. A cast aluminum frame houses a bulletproof custom 2.5-inch voice coil, robust double-layered Nomex spider, and SPL competition-grade paper cone, all built into a flexible design that works in any kind of enclosure. Enclosure Designs .Zip File
$335.99
-
Kicker Kicker CXA1200.1T 1200W Monoblock Amplifier 46CXA1200.1T
Specifications Performance RMS Power Output (Watts x Channels) 600 x 1 Peak Power Output (Watts x Channels) 2400 x 1 Power at 2 Ohms (Watts x Channels) 1200 x 1 Bridged Power (Watts x Channels) N/A Minimum Impedance Bridged N/A Minimum Impedance Unbridged 1 Minimum Impedance 1 Best Frequency Response 25-200 Hz THD at Rated RMS Power 1% Signal to Noise Ratio 70 dB Input Voltage 14.4v Features Amplifier Class D Low-Pass Crossover Frequency 50-200 Hz Low-Pass Slope (dB/octave) 12 dB/octave High-Pass Crossover Frequency N/A High-Pass Slope (dB/octave) N/A Bass Boost 0-6 dB Bass Boost Frequency 40 Hz Fan Cooled No Fuse Rating 100 Speaker Level Inputs Yes Preamp Outputs 1 pair Width (inches) 12-5/8 Height (inches) 2-3/8 Depth (inches) 6-3/4 Parts Warranty 2 Years Labor Warranty 2 Years
$399.99
-
Kicker Kicker 46CXA8001T 800 Watt Mono Block Car Audio Amplifier/Amp
CX800.1 Mono Amplifier The CXA800.1 Mono Amplifier is built for affordable power and performance, thanks to optimized circuit layout and high-grade internal components. About That Power This CX-Series Mono Amp is now one-ohm stable, giving you even more power and wiring options for your system! Using a Class-D power plant, the CXA800.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump with a simple turn of the optional CXARC Remote Bass Controller. A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. Use the full-range outputs to expand your system with other bass amps, or a full-range amp to complete your system. CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time! Expand your system with full-range, RCA pass-through outputs, then choose a “standard” mount or a cool vertical mount with the included hardware. This CX.1 amplifier delivers as much as 800 watts into one bass channel. See below for more details. Efficient Class-D amplifier Three-second turn-on/off delay to eliminate unwanted interference Variable 12dB crossovers provides control to dial in perfect sound KickEQ™ 6dB variable bass boost for those additional low frequencies 24dB subsonic filter for protection from potentially damaging frequencies FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio Accepts up to 40-volt input signal Small footprint for easier installation Compatible with CXARC Remote Bass Control Vertical mounting hardware included for another unique look Specifications MODEL CXA800.1 Power (watts/ch) 4 Ohm 300x1 Power (watts/ch) 2 Ohm 600x1 Power (watts/ch) 1 Ohm 800x1 CXRC Remote Bass Capable (sold sep.) yes Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) 8-1/8, 20.6 Frequency Response (Hz): 25-200, +0/-1dB Input Sensitivity: 250mV-10V (Low Level)1V-40V (High Level) Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave Subsonic Filter: 25Hz @24dB/octave KickEQ™ Boost Variable 0-6dB @40Hz
$299.99
-
Kicker Kicker 46CXA18001T 1800W CX Series Mono Block Class D Car Audio Amplifier/Amp CX
CX1800.1 Mono Amplifier CX-Series Amps reach massive power levels thanks to an optimized circuit layout and the highest-grade internal components. Highly efficient heat sinks keep the amp cool with a sophisticated new look. Mono amps offer an optional remote level control to adjust your bass right from the dash. Power Station The CXA1800.1 Mono Amplifier is built for big bass in a sleek, yet affordable package. Using a Class-D power plant and FIT+™ (Fail-safe Integration Technology-PLUS) for superior dependability, this amp features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump with a simple turn of the optional CXARC Remote Bass Controller. CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time! A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. Use the full range outputs to expand your system with other bass amps, or add a full range amp to complete your system. This CX-Series Amplifier delivers as much as 1,800 watts into one bass channel. See below for more details. Efficient Class-D amplifier Three-second turn-on/off delay to eliminate unwanted interference Variable 12dB crossovers provides control to dial in perfect sound KickEQ™ 6dB variable bass boost for those additional low frequencies 24dB subsonic filter for protection from potentially damaging frequencies FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio Accepts up to 40-volt input signal Small footprint for easier installation Compatible with CXARC Remote Bass Control Vertical mounting hardware included for another unique look Specifications MODEL CXA1800.1 Power (watts/ch) 4 Ohm 900x1 Power (watts/ch) 2 Ohm 1800x1 Power (watts/ch) 1 Ohm 1800x1 +/-10% CXRC Remote Bass Capable (sold sep.) yes Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) 14-3/8, 36.4 Frequency Response (Hz): 25-200Hz Input Sensitivity: 250mV-10V (Low Level)1V-40V (High Level) Signal-to-Noise Ratio: 95dB Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave Subsonic Filter: 25Hz @24dB/octave KickEQ™ Boost Variable 0-6dB @40Hz
$549.99 $499.99
-
ILL Customz ILL Customz Input Style 4-Spot SAE Battery Terminals
ILL Customz SAE Battery Terminals are made for batteries that have SAE Top Post terminals. Whether your battery is stock or aftermarket, the Ill Customz SAE battery terminals are the perfect match. Great for marine, off-road, and audio use Comes in pairs (one positive, one negative) Made from Nickel Plated 6061 aluminum Works with 1/0AWG welding cable, 2/0AWG welding cable, and oversized 1/0AWG wire ONLY WORKS WITH TAPERED SAE POST (top post) Engraved logo
$39.99
-
Kicker Kicker KISLOC2 2-Channel Line Out Convertor LOC Hi-Lo w/Remote Turn-On Wire
Add an amplifier to nearly any radio with the KISLOC2 Stereo Line-Out Converter. Experience true sonic accuracy at any volume level with all the sparkling highs and thunderous lows of your original audio. KISLOC2 Stereo Line-Output Converter Unlike traditional LOCs the KISLOC2 is designed without inductors to deliver a completely flat frequency response at all volume levels. Using nothing more than your factory speaker wires the innovative KISLOC2 automatically converts the speaker signal into both an RCA signal and a powerful 100 milli-amp 12-volt remote wire using DC offset. Powerful enough to turn on multiple amplifiers the 12-volt remote wire delivers plenty of power without hunting for a switched 12-volt power source. Stereo Line-Output Converter (with remote turn-on wire) Add an amplifier to nearly any radio with the KISLOC2 Stereo Line-Out Converter. Experience true sonic accuracy at any volume level, with all the sparkling highs and thunderous lows of your original audio. KISLOC2 Stereo Line-Output Converter Unlike traditional LOCs, the KISLOC2 is designed without inductors to deliver a completely flat frequency response at all volume levels. Using nothing more than your factory speaker wires, the innovative KISLOC2 automatically converts the speaker signal into both an RCA signal and a powerful 100 milli-amp, 12-volt remote wire using DC offset. Powerful enough to turn on multiple amplifiers, the 12-volt remote wire delivers plenty of power without hunting for a switched 12-volt power source. Accepts up to 55 watts (16 volts) of input signal Fully compatible with standard radios and most smart radios* Delivers up to an 8-volt output signal Flat 20Hz-20kHz frequency range at all volume levels Includes a powerful 100 milli-amp, remote turn-on wire. No 12V power source needed! LED indicator for DC offset turn-on *Amplifier output of smart radio must have 60Ω impedance or lower. See dealer for details.
$29.95
-
Kicker Kicker KISLOC 2-Channel Line Out Convertor LOC Hi-Lo Cable to RCA Adapter
KISLOC Speaker wire-to-RCA Converter with LOC, 2ch. The KISLOC is the next level of line-out converters. Stereo Line-Output Converter Compatible with OEM radios that have short circuit protection, these units take as much as 55 watts of input and deliver up to 8 volts of output. This sonically neutral converter delivers outstanding sound quality in an incredibly small footprint. ⚠ WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (DEHP), which is [are] known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
$29.99 $19.99
-
Kicker Kicker 47KSC6904 6x9 6" x 9" 150W 2-Way Coaxial Car Audio Speakers KSC KS
KICKER’s elite KS-Series Coaxial Speakers upgrade your audio to new levels of accuracy with extended frequency response and the smoothest highs. Potent Performance KICKER KS-Series Speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. Internally dampened polypropylene cones and durable rubber surrounds assist the woofers in creating precise midrange and midbass, while high-quality silk-dome tweeters deliver natural, detailed highs. With less than a 3-inch mounting depth and just three millimeters of tweeter protrusion, the KSC690 is a perfect fit in almost every vehicle on the road today. They work best with 15 to 150 watts of recommended power. See below for more details. High power handling Silk-dome tweeters for a smooth sound Polypropylene woofer and tough rubber surrounds Thin-mount design easily fits behind factory grilles Grilles included Specifications Speaker Design 2-Way Woofer [in, mm] 6 x 9, 160 x 230 Tweeter [in, mm] 1, 25 Rated Impedance [Ω] 4 Recommended Amplifier Power [Watts RMS] 15-150 Sensitivity [1W, 1m] 92 Frequency Response [Hz] 30-21k Mounting Hole Diameter [in, mm] 5-11/16 x 8-7/16, 144 x 215 Top Mount Depth [in, mm] 3-3/16, 81 Bottom Mount Depth [in,mm] 3-11/16, 93 Tweeter Protrusion [in,mm] 1/16, 1 Grilles Yes Tweeter Magnet Material Neodymium Tweeter Dome Material Silk Woofer Cone Material Polypropylene Woofer Surround Material Rubber
$159.99 $109.99
-
SMD Steve Meade Designs Steve Meade SMD CC-1 Electronic Crossover Calibrator Car Audio +Test Tone CD
The purpose and benefit of the D’Amore Engineering / SMD Crossover Calibrator. Most modern car audio amplifiers have a built in crossover on the side. Usually, it will start at 30hz and have a huge gap, all the way up to (sometimes) 500hz. The purpose of this tool is to enable the installer to set the crossover frequency of an electronic crossover to the desired frequency, accurately and quickly. Enter "Competition Mode" and easily match gains on any 4-channel amplifier or even multiple bass amplifiers. This is VERY important when using subwoofers that share a common chamber, especially if you have 2 (or more) amplifiers on a dual voice coil driver. What is included? The Crossover Calibrator (CC-1) Protective silicon rubber boot Calibrated Test tone CD Harness This manual Pride of ownership About the design When you pick up the CC-1, know that you are holding a precision piece of equipment. If treated as such it should provide you with many years of reliable service. We have chosen a 9V battery as a power source for a few reasons: They are readily available Isolating the CC-1 from the vehicle’s electrical system for power, guarantees that it will only measure what it is supposed to measure; the audio signal, not noise in the charging system. We also chose an RCA input connector for a few reasons: It makes it pretty easy to measure the output of a headunit directly, if you choose to do so Should the harness become damaged it is easily replaceable or repairable in the field Specifications Everyone hides these in the back of the book. We are proud of our specs, they aren’t lies, so we are putting them up front. The Crossover Calibrator’s circuitry is digital microprocessor controlled Crossover -3dB point accuracy +/- 0.25dB Low Battery LED trigger battery voltage < 6.5Vdc Auto-shut off timer 8 - 10 minutes after ON button is pressed
$187.98
-
Sundown Audio Full Tilt HQ Series 2 Male-to-1 Female Y-Splitter RCA Cable
Full Tilt HQ RCA Interconnect Cables 2 Male-to-1 Female Y-Splitter RCA Gold Plated Connectors Color Coded For Easy Installation Tech Flex Cable Protection
$9.99
-
Sundown Audio Full Tilt Audio 100' 18 AWG 100% OFC Remote Wire
The Full Tilt Audio 18ga OFC remote/primary wire is some of the best on the market. Blue Primary Wire 100% Oxygen Free Copper 100' Spool
$9.99
-
Sundown Audio Sundown Audio X-Series v.2 6.5" Subwoofer
The X-6.5SW is Sundown Audio's first true sub-woofer smaller than 8 inches in diameter. It features a voice coil identical in winding dimensions to their SA-8 v.3 subwoofer (a massive 2” diameter coil with a 1.4” winding height) so thermal power handling is absolutely massive.Specifications: Xmax: 16mm one-way by 70% BL RMS Power: 400-watts Large noise-free pole vent design Specially designed spiral-cut basket venting technique (unique to this model in our line) 2” diameter 4-Layer CCAW wire voice coil wound on thick Kapton former Copper Pole-Cap For Reduced Inductive Distortion Integrated Tinsel Leads to prevent lead slapping Proprietary flat aluminum diaphragm Note on Power Handling: This woofer is mechanically limited. It requires a SMALL ported enclosure. Placing it in a large or sealed enclosure will reduce mechanical power handling substantially. Ported: 0.25-0.33 ft^3 volume Box Recommendations: Sealed: .15 ft^3 Ported: 0.3 ft^3 Displacement: .05 ft^3 Depth: 4.00" Outside Diameter: 6.75" Cut-Out: 5.52" Recommended Tuning: 32hz Recommended Port Area: 4 in^2
$149.99
-
Down4Sound Down4Sound JP8 | 800W RMS Monoblock Amplifier
JP8 AMP: 800W PLUS RMS MONOBLOCK Amplifier RMS power, 1ohm : 700W x 1 @ 12v | 850W x 1 @ 14.4v RMS power, 2ohms: 500W x 1 @ 12v |650W x 1 @ 14.4v RMS power, 4ohms : 490W x 1 @ 12v RMS power, 2ohm Linked: 2300W x 1 - 14.4v Frequency Response: 10 Hz - 270 Hz Low Pass Filter: 35 Hz - 250 Hz Subsonic Filter: 10 Hz - 50 Hz Bass Boost: 0 - 9 Db Input sensitivity: 6V - 0.2V signal to Noise Ratio: 97dB < T.H.D @ 4ohm: less than 0.1% Single unit fuse rating: 120A Strapped fuse rating 220A Length (inches) Width x height (inches):11.81" x 7.4"W 2.24" H Damping Factor: 100 8 GA input for Speaker Wire 4 GA input on Power Wire
$199.99
-
ILL Customz ILL Customz Lug Style 6-Spot Battery Terminals
ILL Customz SAE Battery Terminals are made for all batteries that have SAE Top post terminals. Whether your battery is stock or aftermarket, the Ill Customz SAE battery terminals are the perfect match. Great for marine, off-road, and audio use Comes in pairs (one positive, one negative) Made from Nickel Plated 6061 aluminum for added corrosion resistance and superior conductivity Lugs NOT INCLUDED ONLY WORKS WITH TAPERED SAE POST also known as top post Laser etched logo
$44.99
-
Mechman Alternators Mechman 400A Alternator For 2014-21 GM Silverado Sierra Suburban Tahoe Escalade
*Most alternators are custom built to order. Standard build time is 10-14 days.* This unit comes equipped with a smaller 1.75 inch diameter alternator pulley, and will require a slightly shorter drive belt for proper belt tension. Not recommended for sustained use above 5,000 RPM engine speed. ((Check instructions section for finding belt sizes and wiring)). If you DO NOT use the correct shorter belt, this will result in very low to no output and create extra work load for the alternator. Newly redesigned for 2020, The Elite series offers the highest possible amperage and durability available in a large case alternator. 6 phase technology combined with massive twin rectifier assemblies and 12 diodes makes these alternators totally durable for daily use, while still maintaining 200+ amps at engine idle speeds. These alternators use the more robust 4 pin style regulator than the OE 2 pin ECU controlled alternator. There is no extreme voltage fluctuation as this will bypass the RVC charging system on all 2005> GM truck applications. Simply install the included 1 wire P101 harness to a tested 12v switched source and plug in the included P103 module into the vehicles 2 pin original alternator wiring harness. No check battery light, no computer controlled voltage swings. The voltage you want, when you want it! SKU: 14019400B, B14019400 Other options for these vehicles: Mechman 250A Mechman 320A Mechman 370A Fitment Guide: CADILLAC Escalade 5.7 / 6.0 / 6.2 14-18 CHEVROLET Full Size Truck/Silverado 4.3 14-18 CHEVROLET Full Size Truck/Silverado 5.3 14-18 CHEVROLET Full Size Truck/Silverado 6.0 14-16 CHEVROLET Full Size Truck/Silverado 6.2 14-18 CHEVROLET Full Size Truck/Silverado 6.6 Diesel 07 2 pin plug CHEVROLET Full Size Truck/Silverado 6.6 Diesel 08-18 CHEVROLET Suburban All Gas Engines 14-18 CHEVROLET Tahoe/Full Size Blazer All Gas Engines 14-18 GMC Full Size Truck / Sierra 4.3 14-18 GMC Full Size Truck / Sierra 5.3 14-18 GMC Full Size Truck / Sierra 6.0 14-18 GMC Full Size Truck / Sierra 6.2 14-18 GMC Full Size Truck / Sierra 6.6 Diesel 07 2 pin plug GMC Full Size Truck / Sierra 6.6 Diesel 08-18 GMC Yukon All Gas Engines 14-18
$549.00 - $699.00
-
ILL Customz ILL Customz Single 1/0 Amplifier Inputs
These amp inputs will work with all amplifiers that come with 1/0 gauge terminals excluding Kicker and Rockford Fosgate. Single 1/0 to 1/0 single inputs will accept 1/0 or 2/0 welding cable as well as oversized 1/0 car audio cable Made from Nickel Plated 6061 aluminum Comes in pairs Comes with free red and black heat shrinks for positive and negative terminal Stainless steel hardware included
$19.99 $17.99
