6.5" Speakers
-
Ampere Audio Ampere Audio AA-6.5c Component 6.5" Car Speakers
100w 6.5" Component Set The Ampere Audio 6.5c Dream Series speaker system features a 25mm silk dome tweeter that resides in a hardened plastic housing. The 6.5” midrange also features a single roll surround that eliminates unwanted resonances, acoustical artifacts and dampens mechanical vibrations. The tweeter and midrange have been specifically engineered with complex FEA analysis that perfectly optimizes the motor structures. Engineering a great tweeter and midrange is not enough to guarantee excellent sound quality so we added a touch of SQ Dust. The overall result is a smooth, linear musical output with excellent spectral clarity without delivering overly bright or fatiguing high frequencies commonly found in most car audio component systems. The Dream Series speaker system provides a dynamic range and a life like musical realism that would please just about any audiophile. Features 25mm Silk Dome Tweeter Fully Machined Hardened Plastic Tweeter Housing Dampened Pressed Paper Cone Smooth Termination Single Rubber Surround Powder Coated Aluminum Basket Custom Tooled Crossover with Direct Wiring Connections Audiophile 5 kHz Crossover with Tweeter Integrated Non Resonating Phase Plug Inter woven Tinsel Leads High Temperature CAE/CAD Motor Structure Specifications RMS Power: 100W Peak Power: 150W Nominal Impedance: 4 ohms Fs: 89.57 BL: 5.5 Qms: 4.29 Qes: 0.708 Qts: 0.608 SPL: 90.2 Vas: 6.629 Cms: 281.92 Mms: 11.17 Our Recommendation The Ampere Audio AA-6.5c is a perfect match for our class A/B AA-75.4 4-channel amplifier. Get them both to see what perfection sounds like!
$199.00 $79.99
-
Ampere Audio Ampere Audio AA-6.5sc Coaxial 6.5" Car Speakers
100w 6.5" Coaxial Set Thank you for purchasing the Ampere Audio 6.5sc Dream Series speaker system. The 6.5sc features an adjustable swivel 25mm silk dome tweeter that resides in a hardened plastic housing. The 6.5” midrange also features a single roll surround that eliminates unwanted resonances, acoustical artifacts and dampens mechanical vibrations. The tweeter and midrange have been specifically engineered with complex FEA analysis that perfectly optimizes the motor structures. Engineering a great tweeter and midrange is not enough to guarantee excellent sound quality so we added a touch of SQ dust. Features 25mm Silk Dome Tweeter Fully Machined Hardened Plastic Tweeter Housing Dampened Pressed Paper Cone Smooth Termination Single Rubber Surround Powder Coated Aluminum Basket Custom Tooled Crossover with Direct Wiring Connections Audiophile 5 kHz Crossover with Tweeter Integrated Non Resonating Phase Plug Inter woven Tinsel Leads High Temperature CAE/CAD Motor Structure Specifications RMS Power: 100W Peak Power: 150W Nominal Impedance: 4 ohms Fs: 91.875 BL: 4.183 Qms: 7.634 Qes: 1.094 Qts: 0.957 SPL: 88.6 Vas: 6.599 Cms: 280.661 Mms: 10.692 Our Recommendation The Ampere Audio AA-6.5sc is a perfect match for our class A/B AA-75.4 4-channel amplifier. Get them both to see what perfection sounds like!
$159.00 $59.99
-
Clearance Deals Audio Legion CMG65 6.5" 6 1/2" PAIR Of 2-Way Car Audio Coaxial 100W Speakers
Audio Legion: a car and pro audio manufacturer offering a full line of the best sounding car audio equipment, including amplifiers, subwoofers, pro audio speakers, coaxials, tweeters, component sets, and accessories for competition and daily use. Specs PER Speaker: 50W RMS Power 100W RMS Peak Power 4 Ohm Frequency Response: 58 Hz - 20 KHz Sensitivity: 89.3dB Showtime Electronics is an authorized Audio Legion Dealer
$109.99 $54.99
-
Deaf Bonce Avatar Buran Series CBR-620 6.5" 150W 4-Ohm 2-Way Component Speakers+Tweeters
Specifications Model CBR-620 Type Speakers Size 6.5 " Frequency response 60 - 20000 Hz Package Quantity Pair VC Size 1.00 " Cone Paper Magnet Ferrite Surround Material Cloth RMS Power 75 Watt MAX Power 150 Watt Frame Steel Impedance 4 Ohm SPL 91.00 dB Fs 60.00 Hz Qts 0.45 BL 5.50 Vas 20.40 L
$79.90
-
Ciare Ciare 6A200M-4 6.5″ 4-Ohm 200W RMS Midrange Speaker
Ciare 6A200M-4 | 6.5″ Midrange Speaker (200W RMS) The Ciare 6A200M‑4 Midrange Speaker is designed for audiophiles who demand clarity, precision, and performance from their car audio systems. With a 6.5″ midrange driver and 4‑ohm impedance, it delivers clean, detailed sound that brings vocals and instruments to life, whether in daily driving or high-performance setups. Its robust construction ensures consistent performance and reliability for years to come. Built with a copper voice coil and vented steel basket, the 6A200M‑4 maintains excellent heat dissipation and durability. The speaker integrates seamlessly into full-range systems or can complement high-quality component setups, offering an impressive balance between power handling and sonic accuracy. Whether you’re enhancing your car audio for music or precision tuning, this speaker provides the control and clarity your sound system deserves. With a design focused on efficiency and quality, the Ciare 6A200M‑4 is perfect for anyone looking to upgrade their soundstage without compromising space or aesthetics. Its versatile design works in a variety of enclosures and systems, making it a reliable choice for both casual listeners and professional installers. Specs: Model: Ciare 6A200M‑4 SKU: Ciare-6A200M-4 Speaker Type: Midrange Diameter: 6.5″ (165.1 mm) Impedance: 4 Ω Voice Coil: 1.5″ Copper Basket: Vented Steel Power Handling: Program: 200 W Nominal / Continuous: 100 W Resonance (fs): ~353 Hz Material / Build: High-quality magnet and durable cone construction Recommended Use: Car audio, component systems, full-range setups
$49.99
-
Ciare Ciare 6A200M-8 6.5″ 8-Ohm 200W RMS Midrange Speaker
The Ciare 6A200M-8 packs the heart of performance into a compact midrange driver tailored for clarity, detail, and reliability. With an 8-ohm design, it’s ideal for systems where impedance matching is critical or when using multiple speakers in series. The 1.5″ (38 mm) ferrite voice coil ensures accurate transient response and durability under demanding use. Designed for enthusiasts who demand articulate midrange without compromise, the 6A200M-8 handles up to 200 W (program) with finesse. Whether it's vocals, guitars, or midrange punch, this speaker reproduces with clarity and minimal distortion. The open-frame design reduces coloration while offering consistent performance in a range of mounting environments. Built with Ciare’s Italian heritage, each unit reflects precision engineering from frame to cone. The 6A200M-8 offers a reliable and high-quality option for midrange staging in both component systems and full-range add-on builds. Pair it with tweeters or full-range drivers to complete your soundstage. Specs Parameter Value Nominal Diameter 6.5″ (165 mm) Impedance 8 Ω (nominal) Power Handling (Program) 200 W Voice Coil 1.5″ (38 mm) ferrite Series Americano SKU 6A200M-8 Applications Midrange reproduction in car or custom audio setups
$49.99
-
Ciare Ciare | 6A200MS-4 | 6.5″ Sealed-Back Midrange (200W Program, 4Ω)
The Ciare 6A200MS-4 is a professional-grade sealed-back midrange speaker, crafted for installations where depth and space are limited but sound precision is a must. Its closed-back design isolates the rear wave, preventing interference and delivering clear, accurate mids — perfect for compact enclosures, car audio builds, or professional PA systems. This 6.5″ driver combines durability with detail. Equipped with a 1.5″ copper voice coil on a polyimide former and powered by a high-energy ferrite magnet, it offers smooth, distortion-free performance even under demanding conditions. The sealed housing enhances acoustic control, giving the 6A200MS-4 exceptional vocal clarity and mid-frequency accuracy. Engineered in Italy, this driver is part of Ciare’s renowned “Americano” line — known for precision, musicality, and long-term reliability. Choose the 6A200MS-4 when your system demands clean, powerful mids in a compact, sealed configuration. Specifications Driver Type: Sealed-Back Midrange Nominal Diameter: 6.5″ (165 mm) Impedance: 4 Ω Power Handling: 100 W RMS / 200 W Program Resonant Frequency (Fs): 353 Hz Voice Coil Diameter: 1.5″ (38 mm) Copper, Polyimide Former Magnet Type: Ferrite Basket / Frame: Rigid Steel Frame Design: Fully Sealed Back Housing for Easy Mounting Application: Compact Speaker Enclosures, Car Audio, or PA Midrange Sections
$59.99
-
Ciare Ciare | 6A200MS-8 | 6.5″ Sealed-Back Midrange (200W Program, 8 Ω)
The Ciare 6A200MS-8 is a sealed-back 6.5″ midrange driver built for audio systems demanding clarity, robustness, and compact installation flexibility. Its closed-back structure blocks rear-wave interference and allows use even in tight enclosures or behind panels, while maintaining midrange detail and neutrality. Excellent for high-fidelity 2- or 3-way speakers, critical vocal reproduction, or pro audio installations. Designed with a 1.5″ copper voice coil on a polyimide former and powered by a ferrite motor, this midrange handles up to 200 W (program) with fidelity. The 8 Ω impedance makes it suitable for systems where higher load impedance is required, giving more headroom and crossover flexibility. Its sealed housing ensures stable acoustic behavior without reliance on internal volume, enabling predictable performance across installations. Choose the 6A200MS-8 when you need precise mids in a compact, acoustically isolated package. It’s ideal for installers, OEMs, or audiophiles looking for professional build quality, musical transparency, and durable construction in a sealed configuration. Specifications Driver Type: Sealed-Back Midrange Nominal Diameter: 6.5″ (165 mm) Impedance: 8 Ω Power Handling: 100 W RMS / 200 W Program Voice Coil: 1.5″ (38 mm) copper wound, polyimide former Magnet / Motor: Ferrite motor assembly Frame / Basket: Rigid steel frame Enclosure Design: Fully sealed back for rear wave control Use Cases: Compact speaker enclosures, pro audio midrange, vocal clarity systems
$59.99
-
Ciare Ciare | CME-160 | 6.5″ Midbass (260 W Continuous, 4 Ω)
The Ciare CME-160 6.5″ Midbass Speaker delivers professional-grade sound performance in a compact and durable format. Designed for high-output systems that demand precision and depth, it offers powerful mid-bass reproduction with smooth, natural transitions across the frequency range. Ideal for both car and pro-audio applications, this driver stands out with exceptional clarity and punch. Built with a 1.5″ copper voice coil on a polyimide former, a vented ferrite motor structure, and a rigid steel basket, the CME-160 ensures consistent performance even under extended use. Its pressed-paper cone and treated cloth surround provide the ideal balance between stiffness and responsiveness, giving you a rich and controlled mid-bass that blends perfectly into full-range setups. Whether used as part of a custom sound installation or a premium speaker upgrade, the CME-160 embodies Ciare’s commitment to precision engineering, reliability, and true Italian sound quality. Specifications Driver Type: Midbass Speaker Nominal Diameter: 6.5″ (165 mm) Nominal Impedance: 4 Ω Power Handling (Program): 300 W Power Handling (AES): 150 W Sensitivity (1W/1m): 93 dB Frequency Range: 80 Hz – 8 kHz Voice Coil Diameter: 1.5″ (38 mm) Voice Coil Material: Copper on Polyimide Former Cone Material: Pressed Paper Surround Type: Treated Cloth Basket / Frame: Steel Magnet Type: Ferrite Mounting Depth: 72 mm Net Weight: 2.4 kg
$82.58
-
Ciare Ciare | CMR160 | 6.5″ Extended-Range / Mid-Bass Driver (200 W Program)
The Ciare CMR160 is a versatile 6.5″ extended-range driver built to bridge the gap between midrange and mid-bass duties with clarity, power, and durability. Whether used in full-range systems, compact 2-way enclosures, or as a midbass in multiway systems, it delivers musical presence and control without compromising tonal balance. With a robust ferrite motor structure, 1.5″ voice coil on Kapton, and a rigid steel frame, the CMR160 handles power with stability while maintaining low distortion across its range. Its doped cellulose cone and fabric surround provide a smooth and neutral tonal character, ensuring that vocals, guitars, and instruments sound natural and coherent across the mid-spectrum. Because of its extended-range capability, this driver can take on more bandwidth than typical midranges, giving designers flexibility in crossover points, and reducing the need for tightly constrained bands. The combination of moderate sensitivity, solid excursion capacity, and reliable mechanical design makes it a strong choice for OEMs, installation speakers, or custom builders seeking a dependable, musical driver. Specifications Driver type / Category: 6.5″ Extended-Range / Mid-Bass driver Nominal Impedance: 4 Ω Continuous / Nominal Power: 80 W Program Power: 200 W Sensitivity: ~ 93 dB (1 W / 1 m) Frequency Response: 80 – 8,000 Hz Resonance (Fs): 66 Hz Total Q (Qts): 0.32 Linear Excursion (Xmax): ± 1.5 mm Voice Coil Diameter: 1.5″ (38 mm) Voice Coil Former / Material: Kapton (polyimide) Winding Height: 6 mm Basket / Frame Material: Steel Cone Material: Doped cellulose fiber, exponential shape Surround: Doped fabric Magnet Type: Ferrite Magnet Gap Height: 6 mm Cutout Diameter: ~ 142 mm Overall Depth: ~ 80 mm Mounting Depth: ~ 73 mm Flange Thickness: ~ 7 mm Net Weight: ~ 2.4 kg
$96.47
-
Clearance Deals Jensen JS265 6.5" 100W Coaxial Speakers
Specifications Studio Monitor Speaker Performance The Jensen JS265 car speaker line is not for the faint of heart. They will produce a whopping 100 Watts of Peak Power, 50 Watts RMS, 4 Ohm Impedance and Frequency Response between 80Hz-20kHz for unmatched sound superiority on the road. Only the Best You take pride in the car you drive and with that we know that you only deserve to put the best inside your car. We made sure that we only use high end and long lasting parts in our Jensen car speaker line ensuring crystal clear sound quality for the road ahead. Built for the Road Ahead Your Jensen JS265 car speakers come equipped with all the components that will make any drive more enjoyable. Your car speakers come with a detailed instruction manual that will help you get setup and ready to go in no time. However, we do suggest professional installation to prevent any issues with your new Jensen car speakers. We made sure that at the time of installation you had everything you needed for a smooth upgrade. All Jensen car speakers come with all necessary hardware required to install them properly in your car. Superior Technology & Design We take pride in placing the very best in our car speaker line. This includes: 2 Way Design: enables mid and high frequencies to be projected in a uniform and wide dispersion pattern for smooth off axis response and high quality sound performance. Low Profile Basket Design: for installation flexibility. Vented Basket: dissipates heat for improved efficiency and durability. Treated Paper Cone: for accurate bass response. Mylar Balance Dome Tweeter: for extended high frequency response. Specifications: 6.5″ 2-Way speaker with treated paper cone and black foam surround 1″ Black mylar dome tweeter Stamped steel frame Grilles included One-year warranty Sensitivity 86dB Frequency response 80Hz – 20kHz Nominal impedance 4 Ohms RMS power range 50 Watts Peak power handling 100 Watts Top-mounting depth 2.00″ Bottom-mounting depth 2.30″ Cut-out diameter 5.63″ Mounting height .38″ Tweeter protrusion .25″
$34.95 $29.99
-
JVC JVC CS-DF620 6.5" 6-1/2" 300W 2-Way Car Audio Speakers CSDF620
6-1/2" 2-Way Coaxial Speakers Peak Power Handling: 300 Watts RMS Power Handling: 25 Watts 4 Ohm Impedence Sound Pressure Level: 86dB Mounting Depth: 1-13/16" PP Injection Cone Hybrid Surround Ferrite Magnet 1" Balanced Dome Tweeter Frequency Response 70 - 90,000Hz
$49.95 $39.99
-
JVC JVC CS-VS608 6.5" 6-1/2" 600 Watt 2-Way Car Audio Speakers CSVS608
General Features: 6-1/2" DRVN Series 2-Way Car Speakers Power Handling: Peak: 600 watts per pair / 300 watts each RMS: 120 watts per pair / 60 watts each Carbon Mica cone material Durable hybrid material speaker surround 1" Polyetherimide (PEI) tweeter Flush, Angled and Surface mountable High temperature voice coil Ferrite magnet motor structure 4 ohms impedance Top-mount depth: 2-1/4" Authorized JVC Dealer
$74.99 $59.99
-
Kicker Kicker 43DSC6504 6.5" 6-1/2 240W 4-Ohm 2-Way Coaxial Car Audio Speakers DS DSC65
DS Series 6.5" Coax A drop-in coaxial upgrade with the flexibility to fit nearly any vehicles doors for a vast improvement over factory sound. DS Series 6.5" Coax The DS 6-1/2-Inch Coaxial Speakers are the ideal upgrade for your car doors.Using zero protrusion PEI tweeters ensures you get every bit of clarity you need, without interfering with factory grilles. A stamped steel framework supports a ribbed, UV-treated foam surround and rigid polypropylene cone with EVC™ (Extended Voice Coil) technology, for the best sonic quality.These DS speakers work best with 60 watts of recommended power. See below for more details. Specifications Model DSC650 Speaker Design 2 - Way Woofer [in, mm] 6-1/2, 160 Mid [in, mm] n/a Tweeter [in, mm] 1/2, 13 Rated Impedance [Ω] 4 Peak Power Handling [Watts] 240 Continuous Power Handling [Watts RMS] 60 Sensitivity [1W, 1m] 90 Frequency Response [Hz] 40-20k Mounting Hole Diameter [in, mm] 4-13/16, 123 Top Mount Depth [in, mm] 3/8, 9 Bottom Mount Depth [in, mm] 1-11/16, 43 Tweeter Protrusion [in, mm] 0 Grilles Yes Tweeter Magnet Material Neodymium Tweeter Dome Material PEI (polyether imide) Tweeter Design Balanced dome Woofer Cone Material Polypropylene Woofer Surround Material Polyester foam
$94.99 $84.99
-
Kicker Kicker 46CSC654 6.5" 6-1/2 300W 4-Ohm 2-Way Coaxial Speakers CSC65 CS
CS Series CSC65 The CS Series delivers remarkable performance and ultra-clean bass, utilizing a heavy-duty motor/magnet structure featuring EVC™ (Extended Voice Coil) technology not found in stock speakers. They use polypropylene cones with tough, ribbed, UV-treated surrounds for precise linear excursion and reliability. CS Series CSC65 CS-Series 6-1/2-inch Coaxial Speakers are the perfect way to upgrade your factory speakers. CS-Series Coaxials deliver remarkable performance and ultra-clean bass with a heavy-duty motor/magnet structure not found in stock speakers. The stamped-steel framework supports a rigid polypropylene cone with EVC™ (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles. These CS speakers work best with 100 watts of recommended power. See below for more details. Fits nearly every car made Zero-protrusion tweeters to fit nearly any factory depth Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion UV-treated poly-foam surround resists heat or direct sunlight Large woofer magnet in a heavy-duty motor for ultra-clean bass PEI-tweeter construction provides superb clarity Neodymium tweeter magnets allow for increased volume in high frequencies Steel mesh grilles included for speaker protection Specifications Speaker Design 2 - way Woofer Size | in [mm] 6 1/2 [160] Tweeter Size | in [mm] 1/2 [13] DC Resistance | ohm 3.3 Peak Power | Watts 300 Continuous Power | Watts, RMS 100 Sensitivity [SPLo] | dB @ 1W, 1m 90 Effective Frequency Range | Hz 40-20k Mounting Hole Diameter | in [mm] 4 13/16 [123] Top Mount Depth | in [mm] 3/8 [9] Bottom Mount Depth | in [mm] 1 11/16 [43] Tweeter Protrusion | in [mm] 0 Grilles Yes Tweeter Magnet Material Neodymium Tweeter Dome Materia PEI [polyether imide Tweeter Design Balanced dome Woofer Cone Material Polypropylene Woofer Surround Material Polyester foam
$119.99 $99.99
-
Kicker Kicker 46CSS654 CS-Series 6-1/2" 2-Way Component Speakers
Description 46CSS654 CS-Series 6-1/2" 2-Way Component Speakers The CS Series delivers remarkable performance and ultra-clean bass utilizing a heavy-duty motor/magnet structure featuring EVC (Extended Voice Coil) technology not found in stock speakers. They use polypropylene cones with tough ribbed UV-treated surrounds for precise linear excursion and reliability. CS Series CSS65 The CS-Series 6-1/2-inch Component Speakers are an outstanding factory upgrade. Designed for easy installation in nearly any vehicle CS-Series components include separate titanium tweeters and two-way crossovers with tweeter level control to let you customize your sound for the best sonic quality. The result is precise control with stunning musical realism. Use the flush angled or surface-mount tweeter pods to perfect your imaging and get a sophisticated look! These CS-Series speakers work best with 100 watts of recommended power. Fits nearly every car made 12dB crossovers with a smaller footprint for easier installation Three-position tweeter switch for dialing in your highs EVC (Extended Voice Coil) technology help deliver remarkable bass response Titanium tweeter construction and neodymium magnets to reveal subtle details UV-treated poly-foam surround assists with precise linear excursion Phase plugs in the woofer cones eliminate any distortion Steel mesh grilles protect your drivers Three tweeter mounting options including flush angled and surface pods. Specifications: Woofer Size (in mm): 6-1/2 / 160 Tweeter Size (in mm): 3/4 / 20 Dome Material: Titanium Peak Power Handling: 300 watts Continuous Power Handling: 100 watts Effective Frequency Range: 35Hz - 21kHz Woofer Mounting Hole Diameter (in mm): 4-13/16 / 123 Woofer Bottom Mount Depth (in mm): 1-11/16 / 43 Flush Mounting Tweeter Hole Diameter (in mm): 1-9/16 / 40 Flush Mount Tweeter Depth (in mm): 9/16 / 14.5 High-Pass dB at Frequency: 12 4000Hz Low-Pass dB at Frequency: 12 4000Hz High Frequency Output Attenuation: 0 3 6dB Bolt-Thru Grilles: Yes What's in the Box: One pair of 6-1/2" woofers One pair of 3/4" tweeters w/ attached grilles One pair of crossovers 2 woofer grilles 2 Flush-mount tweeter cups 2 Angled-mount tweeter cups 2 surface-mount tweeter cups Owner's manual
$199.99 $179.99
-
Kicker Kicker 51KSC6704 6.75" 100W 4-Ohm 2-Way Coaxial Speakers KSC670
KSC6706.75" Coaxial Speakers KICKER’s elite KS-Series Coaxial Speakers upgrade your audio to new levels of accuracy with extended frequency response and the smoothest highs. Potent Performance KICKER KS-Series Speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. Internally dampened polypropylene cones and durable rubber surrounds assist the woofers in creating precise midrange and midbass, while high-quality silk-dome tweeters deliver natural, detailed highs. With less than two inches of mounting depth and just two millimeters of tweeter protrusion, the KSC670 is a perfect fit in almost every vehicle on the road today. They work best with 15 to 100 watts of recommended power. See below for more details. High power handling Silk-dome tweeters for a smooth sound Polypropylene woofer and tough rubber surrounds Thin-mount design easily fits behind factory grilles Grilles included Specifications Speaker Design 2-Way Woofer [in, mm] 6-3/4, 165 Tweeter [in, mm] ¾, 20 Rated Impedance [Ω] 4 Recommended Amplifier Power [Watts RMS] 15-100 Sensitivity [1W, 1m] 90 Frequency Response [Hz] 40-21k Mounting Hole Diameter [in, mm] 5-9/16, 141 Top Mount Depth [in, mm] 1-13/16, 46 Bottom Mount Depth [in,mm] 2, 50 Tweeter Protrusion [in,mm] 1/16, 2 Grilles Yes Tweeter Magnet Material Neodymium Tweeter Dome Material Silk Woofer Cone Material Polypropylene Woofer Surround Material Rubber Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.
$149.99 $129.99
-
PRV Audio PRV Audio 6MB200 6-1/2" 8-Ohm Car Pro Audio Midbass Speaker MID
Features The PRV Pro Audio Loudspeaker, 6MB200 mid bass woofer, offers outstanding durability and a smooth punch of mid bass for small enclosures. This woofer is perfect for home Hi-Fi installs, including bookshelf, satellite, surround sound speakers and even home studio monitors. The 6MB200 offers very smooth mid range response, up to 4.5 kHz, and is a perfect option for mid range driver replacements in three-way cabinets. The magnet and motor assembly are attached to a sturdy reinforced steel frame, ensuring a solid support structure and long lasting play in most any environment. Its light weight of only 3.3 Lbs helps to keep your enclosures light, making it perfect for car audio applications. Highlights Nominal Impedance: 8 Ohms Rated AES Power Handling (RMS): 100 Watts Program Power: 200 Watts Sensitivity (1W/1m): 93 dB Voice Coil Diameter: 1.5″
$29.99
-
PRV Audio PRV Audio 6MB200 v2 6.5" 8-Ohm 200W Midbass Car Pro Audio Speaker MID
The PRV Pro Audio Loudspeaker, 6MB200 v2 mid bass woofer, offers outstanding durability and a smooth punch of mid bass for small enclosures. This woofer is perfect for home Hi-Fi installs, including bookshelf, satellite, surround sound speakers and even home studio monitors. The 6MB200-v2 now has more extended mid range response, up to 6.5 kHz compared to its previous model, and is a perfect option for mid range driver replacements in three-way cabinets. The magnet and motor assembly are attached to a sturdy reinforced steel frame, ensuring a solid support structure and long lasting play in most any environment. Its light weight of only 3.3 Lbs helps to keep your enclosures light, making it perfect for car audio applications. Highlights Nominal Impedance: 8 Ohms Rated AES Power Handling (RMS): 100 Watts Program Power: 200 Watts Sensitivity (1W/1m): 93.5 dB Voice Coil Diameter: 1.5″ GENERAL SPECIFICATIONS Nominal Diameter 6″ (152 mm) Nominal impedance 8 Ohms Rated AES Power Handling (RMS) 100 Watts Program Power 200 Watts Sensitivity 2.83V at 1m 93.5 dB Recommended Hi Pass Crossover****For Full Power Handling 125 Hz****12db Per Octave Crossover Frequency Response at -10dB 125 – 6,500 Hz Voice Coil Diameter 1.5″ (38 mm) Voice Coil Wire Copper Voice Coil Winding Depth 12.5 mm Former Material Kapton Magnetic Gap Depth 5.8 mm Frame Material Stamped Steel
$29.91
-
PRV Audio PRV Audio 6MB200-4 v2 6.5" 4-Ohm 200W Midbass Car Pro Audio Speaker MID
The PRV Pro Audio Loudspeaker, 6MB200 v2 mid bass woofer, offers outstanding durability and a smooth punch of mid bass for small enclosures. This woofer is perfect for home Hi-Fi installs, including bookshelf, satellite, surround sound speakers and even home studio monitors. The 6MB200-v2 now has more extended mid range response, up to 6.5 kHz compared to its previous model, and is a perfect option for mid range driver replacements in three-way cabinets. The magnet and motor assembly are attached to a sturdy reinforced steel frame, ensuring a solid support structure and long lasting play in most any environment. Its light weight of only 3.3 Lbs helps to keep your enclosures light, making it perfect for car audio applications. Highlights Nominal Impedance: 4 Ohms Rated AES Power Handling (RMS): 100 Watts Program Power: 200 Watts Sensitivity (1W/1m): 93.5 dB Voice Coil Diameter: 1.5″ GENERAL SPECIFICATIONS Nominal Diameter 6″ (152 mm) Nominal impedance 4 Ohms Rated AES Power Handling (RMS) 100 Watts Program Power 200 Watts Sensitivity 2.83V at 1m 93.5 dB Recommended Hi Pass Crossover****For Full Power Handling 125 Hz****12db Per Octave Crossover Frequency Response at -10dB 125 – 6,500 Hz Voice Coil Diameter 1.5″ (38 mm) Voice Coil Wire Copper Voice Coil Winding Depth 12.5 mm Former Material Kapton Magnetic Gap Depth 5.8 mm Frame Material Stamped Steel
$29.91
-
PRV Audio PRV Audio 6MR200A 6.5" 8-Ohm 200W Midrange Car Pro Audio Speaker MID
The 6MR200A mid range speaker is the evolution of the 6MR250A, this unit was designed with the goal of producing the highest possible output from a compact design without sacrificing performance, with only 2.24″ mounting depth. To ensure absolute signal fidelity, a cloth sealed surround is combined with a carefully crafted Kevlar-loaded paper cone. Additionally, a vented pole piece allows heat to escape for reduced power compression. Use this midrange in professional 3-way live sound cabinets, as a high output car audio door speaker, or as a midrange in a bass guitar speaker. Highlights Nominal Impedance: 8 Ohms Rated AES Power Handling (RMS): 100 Watts Program Power: 200 Watts Sensitivity (1W/1m): 94 dB Voice Coil Diameter: 1.5″ GENERAL SPECIFICATIONS Nominal Diameter 6″ (152 mm) Nominal impedance 8 Ohms Rated AES Power Handling (RMS) 100 Watts Program Power 200 Watts Sensitivity 2.83V at 1m 94 dB Recommended Hi Pass Crossover**For Full Power Handling 150 Hz****12db Per Octave Crossover Frequency Response at -10dB 155 – 11,000 Hz Voice Coil Diameter 1.5″ (38 mm) Voice Coil Wire Copper Voice Coil Winding Depth 8.0 mm Former Material Kapton Magnetic Gap Depth 5.5 mm Frame Material Stamped Steel
$24.91
-
PRV Audio PRV Audio 6MR200A-4 6.5" 4-Ohm 200W Midrange Car Pro Audio Speaker MID
The 6MR200A mid range speaker is the evolution of the 6MR250A, this unit was designed with the goal of producing the highest possible output from a compact design without sacrificing performance, with only 2.24″ mounting depth. To ensure absolute signal fidelity, a cloth sealed surround is combined with a carefully crafted Kevlar-loaded paper cone. Additionally, a vented pole piece allows heat to escape for reduced power compression. Use this midrange in professional 3-way live sound cabinets, as a high output car audio door speaker, or as a midrange in a bass guitar speaker. Highlights Nominal Impedance: 4 Ohms Rated AES Power Handling (RMS): 100 Watts Program Power: 200 Watts Sensitivity (1W/1m): 94 dB Voice Coil Diameter: 1.5″ GENERAL SPECIFICATIONS Nominal Diameter 6″ (152 mm) Nominal impedance 4 Ohms Rated AES Power Handling (RMS) 100 Watts Program Power 200 Watts Sensitivity 2.83V at 1m 94 dB Recommended Hi Pass Crossover**For Full Power Handling 150 Hz****12db Per Octave Crossover Frequency Response at -10dB 155 – 11,000 Hz Voice Coil Diameter 1.5″ (38 mm) Voice Coil Wire Copper Voice Coil Winding Depth 8.0 mm Former Material Kapton Magnetic Gap Depth 5.5 mm Frame Material Stamped Steel
$24.91
-
Sundown Audio SA-Series SA6.5M 6.5" Speakers
The all-new 2025 Sundown SA speaker series has been designed to make a statement. What statement, you may ask? That Sundown Audio can be just as serious about SQ as we are about SPL. Many people already know this but our subwoofers – even the ones used for crushing demos – have some of the lowest distortion on the market. We are now bringing our unique approach to the more dedicated Sound Quality market.Starting at the upper end of the frequency spectrum we have the SA-1T Tweeter. The SA-1T features a 25.5mm silk dome (total 38mm including surround) driven by a powerful neodymium motor structure. The dome features a compact, tuned back chamber which helps it to achieve its extremely low FS around 700hz. This gives you an enormous amount of flexibility in choosing the crossover. The tweeter can be used as a 2-way with the 6.5M or the 8M models or as part of a three way with either and the 3M model. In addition to the low FS and smooth response the SA-1T has a very high 92dB sensitivity so it doesn't take much power to get loud enough for just about anyone. The SA-1T is the 4th generation SA tweeter building on the success of the tweeter found in the SA Component sets over three generations.Headed down the spectrum to the midrange we have the SA-3M. This "little" unit is something incredibly special and is a favorite project of lead product designer / founder Jacob Fuller. We really went all-out on this unit to address the "big 3" drivers of distortion. The SA-3M features 4.5mm of one-way linear excursion by 70% BL (with 8mm x-mech thanks to the custom tooled frame – so no bottoming out even on powerful dynamics) and over 6mm by CMS and LE definitions on Klippel. There is essentially NO risk of the driver reaching linearity limits in most applications. The beefy motor structure is a combination of ferrite and a neodymium pole cap magnet to help us reach 84.5dB sensitivity at 1-watt. There is a double LE treatment internal to the motor via both a copper pole sleeve and an aluminum magnet ID shorting ring allowing the SA-3M to play full-range to beyond 20khz (although, for several reasons, we do suggest using a tweeter for the top-end). On the bottom end they can be high-pass crossed over at 300hz effortlessly with 150-watts of power handling (thanks to the 28mm diameter, extra-long voice coil) or even lower if needed, with less power, due to the incredibly high linear stroke. The suspension system, surround and spider, of the SA-3M took over a year of FEA simulations and testing to reach perfection and is just as important as the motor to the resulting low distortion. We gave the suspension just as much attention as we would for a full blown high-stroke subwoofer. To finish off this masterpiece we tested several different types of woven carbon fiber cones & dust caps to achieve the best FR possible.To finish off the 2025 SA speaker line we created the SA-6.5M and the SA-8M. Both of which can be used as a mid-bass or mid-range speaker depending on your application. Both drivers feature the same attention to detail as the 3M regarding the carbon cone and dust cap, surround, and spider. All of these parts were fully FEA simulated and Klippel verified.The SA-6.5M features 5.9mm one-way linear excursion by 70% BL, 7mm by CMS, and 6.28mm by LE on Klippel. Thanks to the efficient motor venting and ample voice coil the power handling is rated for 110-watts full range / 200-watts with a 70hz HPF filter with a respectable 89dB sensitivity. As with the SA-1T this is a 4th generation SA speaker due to the SA component set from prior generations. For this iteration we optimized it further and also created a new custom-tooled frame. The revised frame is more aerodynamics and also allows for superior coil ventilation. As with most Sundown products you will find a thick magnet-ID Faraday ring as well. Last, but absolutely not least, we have the SA-8M which takes linear stroke to yet another level. We were able to achieve 9mm one-way linear by 70% BL and nearly 10mm by CMS and LE standards. As with the 3M, the 8M features a pole sleeve and magnet ID faraday ring for LE treatment. This unit is an absolute powerhouse for mid-bass, and we believe it will make big waves in the SQ world. On the output side it has a 91.5dB sensitivity and will handle 130-watts full-range / 250-watts with a 70Hz HPF thanks to the efficient motor venting and huge 2" coil. The SA-8M is all-in on SQ and output potential – the Sundown way! Sold As A Pair
$349.99
-
Sparked Innovations Sparked Innovations VB-6.5S4 Voice Blaster Midrange 6.5" Speaker 4ohm 100W
The Sparked Innovations Voice Blaster is a neo-driven midrange speaker designed to deliver crisp, low-distortion sound at high output levels. We developed our midrange speakers for most audio setups where space and power are at a premium. The neodymium motor structure, coupled with a lightweight voice coil former and paper cone, helps create a high-efficiency speaker that can deliver loud music on low power, even in tight spaces. The aluminum phase plug reduces unwanted distortion in the center of the speaker cone. This results in a wider dispersion pattern, suitable for loud and clear listening, even with off-axis positioning, such as when the speaker is mounted in door panels or kick-pods. 6.5" Speaker Feature Specification Frequency Response 80Hz - 6,000Hz Sensitivity 98dB RMS Power Handling 100W Voice Coil Diameter 1.5” Xmax 10mm Motor Material Neodymium Basket Material Cast Aluminum Voice Coil Former Kapton Voice Coil CCAW
$88.99
