Search results for "sundown horizon"

  Power Handling: 130W-320W Watts RMS 4 or 8 Ohms Carbon fiber cone Neodymium motor Spring loaded terminals Sold Individually Neo motors and carbon fiber cones – there’s nothing better!  Made specifically for car audio PA systems, we chose a carbon-fiber cone to handle high SPL systems without breakup, then joined it with a vented, high strength neodymium motor to deliver amazing volume and clarity. 

Read more less

1000 Watt RMS/ 2000 Watt Peak Dual 2 or 4 ohm voice coils Optimized for small ported, sealed, & band-pass enclosures Large aluminum Faraday ring for smooth acoustic response High strength cast aluminum frame Low distortion motor construction High-temperature voice coil wire Spring-loaded terminals Stitched-on “XL” tinsel lead wires The SA Classic sub is a stunning combination of value, power handling, and deep excursion. It features a cast aluminum frame that houses a bulletproof custom 2.5-inch voice coil, robust double-layered Nomex spider, and SPL competition-grade paper cone. These components are built into a flexible design that works well in any type of enclosure. Enclosure Designs .Zip File

Read more less

1000 Watt RMS/ 2000 Watt Peak Dual 2 or 4 ohm voice coils Optimized for small ported, sealed, & band-pass enclosures Large aluminum Faraday ring for smooth acoustic response High strength cast aluminum frame Low distortion motor construction High-temperature voice coil wire Spring-loaded terminals Stitched-on “XL” tinsel lead wires The SA Classic sub is a stunning combination of value, power handling, and deep excursion. It features a cast aluminum frame that houses a bulletproof custom 2.5-inch voice coil, robust double-layered Nomex spider, and SPL competition-grade paper cone. These components are built into a flexible design that works well in any type of enclosure.

Read more less

300 Watts RMS/ 600 Watts Peak Dual 2 or 4 ohm voice coils Large aluminum Faraday ring for smooth acoustic response High-temperature voice coil wire Spring-loaded terminals Integrated vent channels for enhanced cooling Perfect for under/behind seat sub enclosures The SA-6.5SW was created to achieve extremely high performance with less than 4” of mounting depth. Sundown uses a solid-pole design, allowing the back plate to rest against the back wall of the enclosure to reduce the mounting depth requirements even more. Twenty millimeters of mechanical excursion means surprisingly deep bass out of this mighty 6.5” sub!

Read more less

100W Watts RMS Mounting depth: 4.7" Diagonal measurement: 6.25" Motor diameter: 3.5" Frequency response: 4khz-20khz Sensitivity: 105dB Impedance: 4 ohms Ferrite motor Sold individually Nothing says “loud” like horns in a PA system. Handling 100 watts, the SDEH-04 allows you to place the music right where you want it. Extremely efficient and with incredibly low distortion, Sundown horn drivers don’t just play loud – they project, so you’re heard over everyone else. Dimensions Cut-Out 4" x 4" Frame Outer Diameter 4.5" x 4.5" Mounting Depth 4.7"   Frequency Response

Read more less

The X-6.5SW is Sundown Audio's first true sub-woofer smaller than 8 inches in diameter. It features a voice coil identical in winding dimensions to their SA-8 v.3 subwoofer (a massive 2” diameter coil with a 1.4” winding height) so thermal power handling is absolutely massive.Specifications: Xmax: 16mm one-way by 70% BL RMS Power: 400-watts Large noise-free pole vent design Specially designed spiral-cut basket venting technique (unique to this model in our line) 2” diameter 4-Layer CCAW wire voice coil wound on thick Kapton former Copper Pole-Cap For Reduced Inductive Distortion Integrated Tinsel Leads to prevent lead slapping Proprietary flat aluminum diaphragm Note on Power Handling: This woofer is mechanically limited. It requires a SMALL ported enclosure. Placing it in a large or sealed enclosure will reduce mechanical power handling substantially. Ported: 0.25-0.33 ft^3 volume Box Recommendations: Sealed: .15 ft^3 Ported: 0.3 ft^3 Displacement: .05 ft^3 Depth: 4.00" Outside Diameter: 6.75" Cut-Out: 5.52" Recommended Tuning: 32hz Recommended Port Area: 4 in^2

Read more less

Features Sold Individually Power Handling: 100 Watts RMS Impedance: 4/8 Ohm Frequency Range: 120Hz - 6kHz Phase Plug Outside Diameter: 8.25" Cutout Diameter: 7.125" Mounting Depth: 3.50" Effective surface area,Sd: 12.469Mm*

Read more less

  100W RMS Black polypropylene cone UV-resistant rubber surround High-performance titanium dome tweeter Rubber tweeter stalk ring for weather and dust resistance Black stamped steel basket with perimeter venting Sold as pairs Grilles included  3.5" mounting depth Sundown’s constant innovation continues in the affordable E-Series coaxial speakers. Designed for audiophiles and enthusiasts alike, these speakers give you crisp highs, rich mids, and deep, hard-hitting bass! Using a titanium tweeter and tough polypropylene cone, the E-Series drivers use a damped titanium tweeter for smooth response, without the harshness of most metal drivers. An ultra smooth sounding polypropylene cone is mated to the cone with a rubber surround, helping to provide extremely linear excursion. A rubber sealing ring was added to the tweeter stalk, preventing dust and moisture from interfering with motor movement.  The steel frame is custom tooled and vented for outstanding thermal control, so you can play it long and play it loud!

Read more less

The Z v.6 is the second step up in Sundown's "ultra-high excursion" subwoofer lineup after the X v.3 series and replaces the world-famous Z v.5 series. All models (10,12,15,18) feature our custom tooled and patented frames (US Patent Numbers D691596, D691597, D691598, and D741841).Sundown mates these new platform frames to a quad stacked 240mm (9.45”) diameter motor structure with a total magnet stack height of 100mm (3.94”) featuring a hyper-extended pole and extreme clearances (allowing over 4" p-p travel before mechanical bottom effectively making it bottomless). Compared to the X v.3 motor both the top & back plates are thicker allowing for even more magnetic strength and excursion potential. For the Z v.6 the top plate is another 5mm thicker than even the outgoing Z v.5 series!This motor drives a 3" diameter 8-Layer Flat Wire Aluminum Voice Coil wound on a thick aluminum former to incredible levels of excursion. The Z v.6 now uses the same voice coil as the NS v.5 series. The Z v.5 utilized a 4-layer voice coil – the change to an 8-layer was to answer our customers desire for higher motor force (more output) and it does just that!Based on Sundown's years of experience with the Z v.4 and Z v.5 series we've also improved the voice coil ventilation to be even more effective. The Z v.6 features a high-velocity pole vent, a heavily vented magnetic gap, and (all new for the v.6) machined channels in four places around the pole piece itself.The Z v.6 series was designed from the ground-up to become the new standard in the low-frequency / small ported box subwoofer category in this price range. They will work in the same small enclosures that are commonly used for for Sundown Audio's subwoofers, although, they can be used with enclosures up to about 50% larger than those if you desire even more low-end extension.The Z v.6 series is really a different kind of woofer due to its incredibly linear suspension. They are designed for the LOWEST level of bass extension possible in a small enclosure while maintaining extremely low levels of distortion. Features Power Handling:3250 Watts RMS / 6500 Watts Peak Xmax = 35mm one-way by 70% BL Heavily vented magnetic gap Spring Loaded Terminals Optimized high-velocity pole vent Innovative high-velocity cast-aluminum vented frame spacer ring Black aluminum 3 inch 8-layer voice coil Mega-Roll v.2 surround Custom tooled basket Large aluminum Faraday (shorting) Ring Stitched-On XL Tinsel Leads to prevent fatigue and failure Custom-tooled ultra-linear spider packs Enclosure Designs .Zip File

Read more less

1250 Watts RMS / 2500 Watts Peak Dual 2 or 4 ohm voice coils Vented magnetic gap & pole piece Aluminum 2.75” voice coil former for superior heat dissipation Innovative high velocity, cast aluminum vented frame spacer ring Magnet ID faraday ring for smooth acoustic response High-temperature copper voice coil wire Spring-loaded terminals Stitched-on double “XL” tinsel leads This SA-10/12/15 v.2 series is a top-down upgrade from the original SA series. The 2.75” coil punches way above its weight, outperforming many 3” coils without the adding weight & with the added advantage of a wider spider. We are able to perfectly balance the mass, motor force, and suspension stiffness for the intended power level. The motor also features a large magnet shorting ring (faraday ring) to reduce distortion and deliver smoother response across the entire acoustic spectrum. The motor & coil setup is mated to an extremely robust multi-layer spider with fully tied-on & doubled-up “XL” tinsel leads. A competition-grade paper cone, strong foam surround, and cast aluminum frame are used to complete this masterpiece. On top of the ~19mm of one-way linear excursion we have an x-mech limit of 37mm one-way before coil bottom making it nearly "bottomless." The 18" model features a larger diameter motor to drive the higher mass. Enclosure Designs .Zip File

Read more less

  3,000 x 1 @ 1 ohms RMS 2,000 x 1 @ 2 ohms RMS 1,300 x 1 @ 4 ohms RMS Class D amplifier 12dB variable low pass filter: 40Hz - 180Hz 12dB subsonic filter: 10Hz – 40Hz Phase shift control 0-180 degrees Power, clipping & protection indicators included Heavy aluminum heat sink for improved thermal control Thermal, voltage, speaker short, and dc-offset protection circuitry Wired remote control with clipping indicator The Sundown Audio SAEv4-3000D is a simple, powerful upgrade for any car audio enthusiast seeking superior output and reliability. This high-performance half-bridge class D amplifier ensures powerful, detailed output, with variable phase, lowpass and subsonic filters providing the control you need - for the sound you love. Featuring robust protection circuitry against thermal, voltage, speaker short, and DC-offset issues, along with power and protection indicators, this amplifier guarantees long-lasting durability, while the heavy aluminum heat sink enhances thermal control, preventing overheating during extended use. The included wired remote with clipping indicator provides real-time monitoring and output control!

Read more less

  125 W RMS Silk dome tweeter Hybrid fiber cone Integrated crossover Cast aluminum frame Premium spring-loaded speaker terminals SPL: 91 Db Frequency range:  45Hz - 20KHz Sundown’s premiere sound quality separates, the SA-6.5CS is a marvel of design and top-tier components.  The midrange features a high-quality cast aluminum basket, housing a cone with a carefully selected blend of paper and wool fibers. This design dampens any unwanted resonances for an incredibly smooth, detailed response. The surround is a high-compliance rubber, engineered to tame edge resonances within the cone.An FEA-optimized motor was designed in-house and features a full 6mm one-way linear excursion - thanks to a carefully designed motor and extended pole piece. To increase thermal performance, the SA midrange features a vented magnetic gap and vented voice coil collar.The SA series silk dome tweeter matches the smooth sound of the midrange. After extensive testing, Sundown optimized the tweeter’s gap, dome material, lens, and chamber damping material. The results speak for themselves.The SA separates were engineered for one, simple goal: to let you completely immerse yourself in the music. At any volume. For as long as you want.

Read more less