Kicker Marine

KMTC8 Coaxial Tower System Livin’ Loud and looking good, KICKER KMTC8 Coaxial Tower Systems are the strong, stylish solution your boat needs. Sold as pairs. LIFE OF THE PARTY You want great looks, total adjustability and next-level sound quality on your boat, whether you’re cruising to your favorite fishing hole or rockin’ at Party Cove. Rotate the speaker in any direction without tools, then watch the LED’s light up the night.   Four-Ohm Voice Coil One-Inch Titanium Tweeter UV-Treated Polypropylene Woofer With Santoprene® Surround 354˚ Swivel With Toolless Locking Cam/Toggle System Stainless Steel/ABS Clamp Fits 1.5 - 3.25-Inch Tubing UV-Resistant Polymer Basket Through-Clamp Wiring System 316L Stainless Mounting Hardware Included Grille With Seven-Color LED System Included* Meets or Exceeds ASTM Standards for UV** and Salt/Fog Exposure*** *Upgradable to 20 Colors and 19 Lighting Modes with KMLC. **ASTM B117 200 hr. Salt Fog Test***ASTM G154 400 hr. Accelerated UV Test The KMTC Eight-Inch Coaxial Tower System works best with 150 watts of recommended power. Specifications Woofer (in, cm) 8, 20 Tweeter (in, cm) 1, 2.5 Tweeter Dome Material Titanium Rated Impedance (ohms) 4 Peak Power Handling (Watts) 300 Continuous Power Handling (Watts RMS) 150 Sensitivity (1W, 1m) 92 Frequency Response (Hz) 30-21k Height incl. bracket (in, cm) 12-3/8, 31.4 Height from roll bar (in, cm) 9-7/16, 24 Diameter (in, cm) 8-3/16, 20.7 Depth (in, cm) 11-5/16, 28.6 LED Lighting Yes What's in the Box: 2 - full-range speaker enclosuresmounting hardware

Read more less

KXMA Amps are built for the outdoors. Gain, crossover and bass-boost controls are protected behind a gasket-sealed panel, as is the control cover hiding the settings, creating a water-resistant barrier to key controls. Real Marine™ The KICKER Real Marine standard means your amplifier is purpose-built for your boat. Every KXMA (and KMA)-Series amp comes complete with anti-corrosive speaker, power and RCA terminals, stainless-steel screws, conformal-coated circuit boards and ABYC/NMMA-compliant power connections. KICKER products also undergo rigorous testing to ensure they meet or exceed marine industry standards for UV, humidity and saltwater exposure. This unparalleled commitment to engineering quality and maritime safety is why our products truly are "Real Marine." KickEQ™ delivers as much as an 6dB of extra bump with a simple turn of the knob. A powerful 24dB crossover is also included, letting you quickly tune your system to perfection. A full-range RCA output allows you to easily add another amplifier without running new signal cable to your KICKER KMC Media Center. Class D Amplifier Gain Control With "Gain Match" LED Indicator FIT2™ (Fail-safe Integration Technology) Circuitry Variable 24dB Crossover DSP-Controlled Preamp KickEQ™ 6dB Variable Bass Boost ABYC/NMMA-Compliant Power Terminals Conformal-Coated Circuit Boards Easy Access to Settings behind Gasket-Sealed Cover Panel Black Anodized Aluminum Chassis Top-Mounted, Teal LED Light Pipe Stainless-Steel Mounting Hardware Included Want setup help? Go to KICKER U for a free woofer-and-amp configuration app! This KXMA amplifier delivers as much as 125 watts into four full-range channels, or 250 watts into two sets of bridged channels. See below for more details. Specifications POWER [watts/ch], 2 OHM STEREO 125 x 4 POWER [watts/ch], 4 OHM STEREO 75 x 4 POWER [watts/ch], 4 OHM BRIDGED MONO: 250 x 2 DYNAMIC POWER [watts]: 700 DIMENSIONS [in] all models 2-1/8H x 8-5/16W x ___L 11-3/16 DIMENSIONS [cm] all models 5.4H x 21.0W x ___L 28.4 FREQUENCY RESPONSE [Hz] 10-20k, +0/-1dB INPUT SENSITIVITY High Level 250mV-10V, Low Level 125mV-5V SIGNAL-TO-NOISE RATIO >95dB, a-weighted, re: rated power ACTIVE CROSSOVER (amp 1) 24dB/octave, variable 10-5kHz w/ 10x switch, selectable high pass, low pass or all pass (amp 2) 24dB/octave, variable high pass 10-500Hz, variable low pass 40-5kHz w/10x switch, selectable high pass, low pass, all pass or band pass KickEQ™ BOOST Variable 0-6dB, centered @ 40Hz (Only on amp 2) COMES WITH WIRED REMOTE No

Read more less

12" 4Ω Marine Subwoofer   The KICKER® KM 12-inch Marine Subwoofer makes serious bass in a sealed or ported enclosure. Made to take the power and the weather, this sub is custom made to bump in your boat. SHOCK WAVES Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KM Series of subs. FEATURES Four-Ohm Voice Coil Injection-Molded Polypropylene Cone Co-molded Santoprene® Surround UniPlate™ Back Plate And Pole Piece Thick Tinsel Leads Large Ceramic Magnet Polymer Basket Resists Corrosion Protective Terminal Cap Stainless Mounting Hardware Included Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure (ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test) Want setup help? Go to KICKERU for a free woofer and amplifier configuration app! *The KM 12-inch Subwoofer works best with a sealed or ported enclosure and 175 watts of recommended power. See below for more details. Specifications Thiele/Small Parameters Woofer(in,mm) 12, 30 Impedance (OHMS) 4 SVC Peak Power (watts, per ANSI/CTA-2031-A) 350 Recommended Amplifier Power (watts RMS) 175 Sealed Enclosure Volume Min-Max(ft³, L) 1.25-3.5, 25.4-99.1 Vented Enclosure Volume Min-Max(ft³, L) 1.75-2.25, 49.6-63.7 Frequency Response(Hz) 30-500 Mounting Depth(in, cm) 5.5, 13.9 Hole Diameter(in, cm) 11, 27.9 Outer Diameter(in, cm) 13, 32.95 What's in the Box: 1 - 12" Woofer 1 - Back gasket 8 - Mounting screws 8 - Mounting screw clips 1 - Manual

Read more less

10" 4Ω Marine Subwoofer   The KICKER® KM 10-inch Marine Subwoofer makes serious bass in a sealed or ported enclosure. Made to take the power and the weather, this sub is custom made to bump in your boat. SHOCK WAVES Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KM Series of subs. FEATURES Four-Ohm Voice Coil Injection-Molded Polypropylene Cone Co-molded Santoprene® Surround UniPlate™ Back Plate And Pole Piece Thick Tinsel Leads Large Ceramic Magnet Polymer Basket Resists Corrosion Protective Terminal Cap Stainless Mounting Hardware Included Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure (ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test) Want setup help? Go to KICKERU for a free woofer and amplifier configuration app! *The KM 10-inch Subwoofer works best with a sealed or ported enclosure and 175 watts of recommended power. See below for more details. Specifications Woofer(in,mm) 10, 25 Impedance (OHMS) 4 SVC Peak Power (watts, per ANSI/CTA-2031-A) 350 Recommended Amplifier Power (watts RMS) 175 Sealed Enclosure Volume Min-Max(ft³, L) 1-2.4, 28.3-68 Vented Enclosure Volume Min-Max(ft³, L) 1.25-1.75, 35.4-49.6 Frequency Response(Hz) 30-500 Mounting Depth(in, cm) 5, 12.7 Hole Diameter(in, cm) 9-3/16, 23.2 Outer Diameter(in, cm) 10-11/16, 27.1 What's in the Box: 1 - 10" Woofer 1 - Back gasket 8 - Mounting screws 8 - Mounting screw clips 1 - Manual -->

Read more less

KM 8" 4Ω LED Coaxial Loud and clear, the KM Coaxial Marine Speakers are built to pump out the tunes – and the fun - for years to come! Whether you mount your speakers in the hull or in KICKER® tower enclosures, you also get a pair of stout marine-grade grilles! LIGHT IT UP Our speakers are made to thrive in the water. UV treatments on injection-molded cones, Santoprene® surrounds, baskets and grilles all help maintain top-shelf performance. KM speakers will endure almost any weather conditions with splash-and-spray-resistant sealed motors, cones and Locking/Sealed Terminal Covers. Speaker hardware is forged from rustproof, 316L stainless-steel.   Four-Ohm Voice Coil One-Inch Titanium Tweeter UV-Treated Polypropylene Woofer With Santoprene® Surround UV-Resistant Polymer Basket Locking/Sealed Terminal Cover Sealed Motor Structure 316L Stainless Mounting Hardware Included White and Charcoal Grilles With Seven-Color LED System Included* Meets or Exceeds ASTM Standards for UV** and Salt/Fog Exposure*** **ASTM B117 200 hr. Salt Fog Test ***ASTM G154 400 hr. Accelerated UV Test *Upgradable to 20 Colors and 19 Lighting Modes with KMLC This KM Eight-Inch Coaxial Speaker works best with 150 watts of recommended power. Specifications Woofer(in,mm) 8, 200 Tweeter(in,mm) 1, 25 Tweeter Dome Material Titanium Rated Impedance(Ω) 4 Peak Power Handling(Watts) 300 Continuous Power Handling(Watts RMS) 150 Sensitivity(1W,1m) 92 Frequency Response(Hz) 30-21k Mounting Hole Diameter(in,mm) 6-9/16, 170 Mounting Depth(in,mm) 3-5/16, 82.9 LED Lighting Yes Grilles Charcoal and White What's in the Box: 2 - 8" 4Ω Coaxials 8 - Mounting Screws 8 - Mounting Screw Clips 2 - Wire Connection Cover 2 Zip Ties

Read more less

Kicker 45KM654L Loud and clear, the KM Coaxial Marine Speakers are built to pump out the tunes – and the fun - for years to come! Whether you mount your speakers in the hull or in KICKER® tower enclosures, you also get a pair of stout marine-grade grilles!   LIGHT IT UP Our speakers are made to thrive in the water. UV treatments on injection-molded cones, Santoprene® surrounds, baskets and grilles all help maintain top-shelf performance. KM speakers will endure almost any weather conditions with splash-and-spray-resistant sealed motors, cones and Locking/Sealed Terminal Covers. Speaker hardware is forged from rustproof, 316L stainless-steel.   Four-Ohm Voice Coil 3/4-Inch Titanium Tweeter UV-Treated Polypropylene Woofer With Santoprene® Surround UV-Resistant Polymer Basket Locking/Sealed Terminal Cover Sealed Motor Structure 316L Stainless Mounting Hardware Included White and Charcoal Grilles With Seven-Color LED System Included* Meets or Exceeds ASTM Standards for UV** and Salt/Fog Exposure*****ASTM B117 200 hr. Salt Fog Test***ASTM G154 400 hr. Accelerated UV Test   *Upgradable to 20 Colors and 19 Lighting Modes with KMLC This KM 6.5-Inch Coaxial Speaker works best with 65 watts of recommended power. Specifications Woofer(in,mm) 6-1/2, 165 Tweeter(in,mm) 3/4, 20 Tweeter Dome Material Titanium Rated Impedance(Ω) 4 Peak Power Handling(Watts) 195 Continuous Power Handling(Watts RMS) 65 Sensitivity(1W,1m) 90 Frequency Response(Hz) 35-21k Mounting Hole Diameter(in,mm) 5-1/16, 128 Mounting Depth(in,mm) 2-3/8, 59.9 LED Lighting Yes Grilles Charcoal and White What's in the Box: 2 - 6.5" 4Ω Coaxials8 - Mounting Screws8 - Mounting Screw Clips2 - Wire Connection Cover2 Zip Ties  

Read more less

Experience the perfect way to get bass on your boat! A mighty Class-D power plant, 12dB crossover and subsonic filter all help you dial in the best sound. Use the remote level control to adjust the bass right from the dash and connect the full-range RCA outputs to expand your system! Ultra-Efficient Class D Design 800 Watts of Dynamic Power Mono Amplifier Conformal-Coated Circuit Board KMBLC Remote Level Control Included Variable 12dB Crossover KickEQ™ Variable 6dB Bass Boost Fixed 25Hz Subsonic Filter RCA Pass Through Output Real Marine™ ABYC/NMMA-Compliant Power Connections 316L Stainless-Steel Hardware Included Want setup help? Go to KICKER U for a free woofer-and-amp configuration app! This KM-Series marine amplifier delivers 800 watts into one channel. See below for more details. Product highlights: Mono Marine Amplifier 300 watts RMS x 1 at 4 ohms 600 watts RMS x 1 at 2 ohms 800 watts RMS x 1 at 1 ohm CEA-2006 compliant Class A/B design Variable low-pass filter (50-200 Hz, 12 dB/octave) Subsonic filter (25 Hz, 24 dB/octave) Variable bass boost (0-6 dB at 40 Hz) Other Features: Weather-resistant conformal-coated circuit boards Stainless-steel no-rust hardware Remote control included Wiring and hardware not included with amplifier 4-gauge power and ground leads and a 100-amp fuse recommended Frequency response: 25-200 Hz Dimensions: 8"W x 2-1/4"H x 6-5/8"D MFR # 48KMA8001   What's in the box: Kicker KMA800.1 owner's manual Mono marine amplifier KMBLC Remote bass level control 19.5' Remote cable (RJ-11 connectors on both ends) Two 3/8" screws Four 3/4" screws Allen key Quickstart guide (Eng/Span/Fren/Other) Power chart Kicker power certification

Read more less

Tough, Powerful and Independent Covered in tough, powder-coated aluminum, the KICKER KPB2 35-inch PowerBar includes eight mid-woofers and two titanium tweeters that fire up the outdoors. This IP66-rated system is driven by a 300-watt power plant, and the included 3.5mm line-output connection lets you add more amplifiers for an even bigger sound system. A completely self-enclosed system, KICKER PowerBars do not require a head unit. Connect sources wirelessly via Bluetooth® or a full-range AUX stereo input, then control it all with the included steering wheel-mounted wireless remote. Four DSP-controlled EQ presets are easily accessible via oversized buttons in the center of the PowerBar. Enabling KICKER’s Broadcast Mode™ wirelessly connects numerous PowerBars together, allowing everyone to enjoy the same music at the same time while on the trail, stopped at the campsite or gathering around the campfire. The included bracketing lets you quickly mount the PowerBars on a 1.5”, 1.75” or 2” round tube, or you can mount on a 0.75”, 1” or 1.25” square tube (available here).   Eight 3-inch Midranges and Two Titanium 1-inch Tweeters Weather-proof with IP66 Rating Wireless Remote Control Included Controlled via Phone or Remote LED Backlit Controls Broadcast Mode Pairs and Shares Music 300 Watts (@10% THD) Stereo AUX Input Stereo Bluetooth Receiver Four EQ Settings 3.5mm Line-Out Connection to add more audio Watch an install video from Kicker!

Read more less

Tough, Powerful and Independent Covered in tough, powder-coated aluminum, the KICKER KPB1 21-inch PowerBar includes four mid-woofers and two titanium tweeters that fire up the outdoors. This IP66-rated system is driven by a 150-watt power plant, and the included 3.5mm line-output connection lets you add more amplifiers for an even bigger sound system. A completely self-enclosed system, KICKER PowerBars do not require a head unit. Connect sources wirelessly via Bluetooth® or a full-range AUX stereo input, then control it all with the included steering wheel-mounted wireless remote. Four DSP-controlled EQ presets are easily accessible via oversized buttons in the center of the PowerBar. Enabling KICKER’s Broadcast Mode™ wirelessly connects numerous PowerBars together, allowing everyone to enjoy the same music at the same time while on the trail, stopped at the campsite or gathering around the campfire. The included bracketing lets you quickly mount the PowerBars on a 1.5”, 1.75” or 2” round tube, or you can mount on a 0.75”, 1” or 1.25” square tube (available here).   Four 3-inch Midranges and Two Titanium 1-inch Tweeters Weather-proof with IP66 Rating Wireless Remote Control Included Controlled via Phone or Remote LED Backlit Controls Broadcast Mode Pairs and Shares Music 150 Watts (@10% THD) Stereo AUX Input Stereo Bluetooth Receiver Four EQ Settings 3.5mm Line-Out Connection to add more audio Watch an install video below!

Read more less

10" 2Ω Marine Subwoofer   The KICKER® KM 10-inch Marine Subwoofer makes serious bass in a sealed or ported enclosure. Made to take the power and the weather, this sub is custom made to bump in your boat. SHOCK WAVES Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KM Series of subs. FEATURES 2-Ohm Voice Coil Injection-Molded Polypropylene Cone Co-molded Santoprene® Surround UniPlate™ Back Plate And Pole Piece Thick Tinsel Leads Large Ceramic Magnet Polymer Basket Resists Corrosion Protective Terminal Cap Stainless Mounting Hardware Included Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure (ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test) Want setup help? Go to KICKERU for a free woofer and amplifier configuration app! *The KM 10-inch Subwoofer works best with a sealed or ported enclosure and 175 watts of recommended power. See below for more details. Specifications Woofer(in,mm) 10, 25 Impedance (OHMS) 2 SVC Peak Power (watts, per ANSI/CTA-2031-A) 350 Recommended Amplifier Power (watts RMS) 175 Sealed Enclosure Volume Min-Max(ft³, L) 1-2.4, 28.3-68 Vented Enclosure Volume Min-Max(ft³, L) 1.25-1.75, 35.4-49.6 Frequency Response(Hz) 30-500 Mounting Depth(in, cm) 5, 12.7 Hole Diameter(in, cm) 9-3/16, 23.2 Outer Diameter(in, cm) 10-11/16, 27.1 What's in the Box: 1 - 10" Woofer 1 - Back gasket 8 - Mounting screws 8 - Mounting screw clips 1 - Manual -->

Read more less

KXM Amplifiers are built for fun, no matter where you go. Power, speaker and input connections are gasket-sealed, as is the control cover hiding the settings, creating a water-resistant barrier to key components. KXMA1200.1 Amplifier The KXM 1200-watt mono amplifier uses Class D technology for huge power in a small chassis. KickEQ+™ provides an enormous 18dB of variable bass boost, while a powerful 24dB crossover and subsonic filter to give you the acoustic control to quickly perfect your sound. A wireless controller is also included for perfecting your sound on the fly. Monitor and adjust gain, bass boost, clipping and more without leaving the driver's seat! Features: Class D Power Plant One-Ohm Stable SHOCwave™ Bass Restoration Processor KXARC Wireless Remote Included Gain Control With "Optimal Input" Indicator Variable 24dB Subsonic Filter FIT2™ (Fail-Safe Integration Technology) Circuitry Variable 24dB Crossover DSP-Controlled Preamp KickEQ+™ 18dB Variable Bass Boost ABYC/NMMA Compliant Power Terminals Conformal-Coated Circuit Boards Easy Access to Settings behind Gasket-Sealed Cover Panel Black Anodized Aluminum Chassis Top-Mounted Teal LED Light Pipe Stainless Steel Mounting Hardware Included Want setup help? Go to KICKER U for a free woofer & amplifier configuration app! This KXM amplifier delivers as much as 1200 watts into one channel. See below for more details. Specifications RMS Power [Watts] @ 14.4V, 4Ω mono, ≤ 1% THD+N : 600 x 1 @ 14.4V, 2Ω mono, ≤ 1% THD+N : 1200 x 1 @ 14.4V, 1Ω mono, ≤ 1% THD+N : +/- 10% Length [in, cm] 9-9∕16 , 24.4 Height [in, cm] 2-⅛, 5.5 Width [in, cm] 8-5⁄16 , 21 Frequency Response ± 1dB 10Hz–160Hz Signal-to-Noise Ratio 95dB Input Sensitivity 250mV–10V Selectable Electronic Crossover Variable Lo-pass 40Hz–160Hz, 24dB/octave Subsonic Filter Variable 10–80Hz, 24dB/octave KickEQ+™ Parametric Bass Boost (Remote Control Adjustable) Boost - Variable 0-18db Center Frequency - 20Hz-80Hz Bandwidth 1-5 Remote Bass Yes CEA Power 600 x 1 @ 4 ohms, 14.4VDC, 1% THD, CEA-2006B (Watts) CEA Signal-to-Noise Ratio -75dB CEA-2006B (ref: 1W, A-weighted)

Read more less

KXMA400.2 Marine Amplifier KickEQ™ delivers as much as an 6dB of extra bump with a simple turn of the knob. A powerful 24dB crossover is also included, letting you quickly tune your system to perfection. A full-range RCA output allows you to easily add another amplifier without running new signal cable to your KICKER KMC Media Center. Class D Amplifier Gain Control With "Gain Match" LED Indicator FIT2™ (Fail-safe Integration Technology) Circuitry Variable 24dB Crossover DSP-Controlled Preamp KickEQ™ 6dB Variable Bass Boost ABYC/NMMA-Compliant Power Terminals Conformal-Coated Circuit Board to resist moisture Easy Access to Settings behind Gasket-Sealed Cover Panel Black Anodized Aluminum Chassis Top-Mounted, Teal LED Light Pipe Stainless-Steel Mounting Hardware Included Want setup help? Go to KICKER U for a free woofer-and-amp configuration app! This KXMA amplifier delivers as much as 200 watts into two full-range channels, or 400 watts into one bridged channel. See below for more details. Product highlights: 2-channel marine amplifier 100 watts RMS x 2 at 4 ohms 200 watts RMS x 2 at 2 ohms 400 watts RMS x 1 bridged at 4 ohms (4-ohm stable in bridged mode) CEA-2006 compliant Class D amp technology Gain knob also functions as clip light Variable high-pass filter (10-500 Hz, 24 dB/octave) Variable low-pass filter (40-500 Hz, 24 dB/octave) with 10x switch Bandpass engages both high- and low-pass filters Variable bass boost (0-6 dB at 40 Hz) Other Features: Weather-resistant conformal-coated circuit boards Front-mounted controls protected behind gasket-sealed fold-down door Fail-Safe Integration Technology eliminates noise from your vehicle's electrical system Preamp and speaker-level inputs (speaker wire to RCA adapter required for speaker-level input)) Preamp outputs Wiring and hardware not included with amplifier 8-gauge power and ground leads and a 60-amp fuse recommended for multiple amplifiers, an additional 60-amp in-line fuse between the distribution block and this amplifier is recommended Dimensions: 9-9/16"W x 2-3/16"H x 8-5/16"D

Read more less

12" 2Ω Marine Subwoofer   The KICKER® KM 12-inch Marine Subwoofer makes serious bass in a sealed or ported enclosure. Made to take the power and the weather, this sub is custom made to bump in your boat. SHOCK WAVES Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KM Series of subs. FEATURES Two-Ohm Voice Coil Injection-Molded Polypropylene Cone Co-molded Santoprene® Surround UniPlate™ Back Plate And Pole Piece Thick Tinsel Leads Large Ceramic Magnet Polymer Basket Resists Corrosion Protective Terminal Cap Stainless Mounting Hardware Included Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure (ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test) Want setup help? Go to KICKERU for a free woofer and amplifier configuration app! *The KM 12-inch Subwoofer works best with a sealed or ported enclosure and 175 watts of recommended power. See below for more details. Specifications Thiele/Small Parameters Woofer(in,mm) 12, 30 Impedance (OHMS) 2 SVC Peak Power (watts, per ANSI/CTA-2031-A) 350 Recommended Amplifier Power (watts RMS) 175 Sealed Enclosure Volume Min-Max(ft³, L) 1.25-3.5, 25.4-99.1 Vented Enclosure Volume Min-Max(ft³, L) 1.75-2.25, 49.6-63.7 Frequency Response(Hz) 30-500 Mounting Depth(in, cm) 5.5, 13.9 Hole Diameter(in, cm) 11, 27.9 Outer Diameter(in, cm) 13, 32.95 What's in the Box: 1 - 12" Woofer 1 - Back gasket 8 - Mounting screws 8 - Mounting screw clips 1 - Manual -->

Read more less

KMTC8W Coaxial Tower System Livin’ Loud and looking good, KICKER KMTC8 Coaxial Tower Systems are the strong, stylish solution your boat needs. Sold as pairs.   LIFE OF THE PARTY You want great looks, total adjustability and next-level sound quality on your boat, whether you’re cruising to your favorite fishing hole or rockin’ at Party Cove. Rotate the speaker in any direction without tools, then watch the LED’s light up the night.   Four-Ohm Voice Coil One-Inch Titanium Tweeter UV-Treated Polypropylene Woofer With Santoprene® Surround 354˚ Swivel With Toolless Locking Cam/Toggle System Stainless Steel/ABS Clamp Fits 1.5 - 3.25-Inch Tubing UV-Resistant Polymer Basket Through-Clamp Wiring System 316L Stainless Mounting Hardware Included Grille With Seven-Color LED System Included* Meets or Exceeds ASTM Standards for UV** and Salt/Fog Exposure***   *Upgradable to 20 Colors and 19 Lighting Modes with KMLC. **ASTM B117 200 hr. Salt Fog Test***ASTM G154 400 hr. Accelerated UV Test The KMTC Eight-Inch Coaxial Tower System works best with 150 watts of recommended power.   Specifications Woofer (in, cm) 8, 20 Tweeter (in, cm) 1, 2.5 Tweeter Dome Material Titanium Rated Impedance (ohms) 4 Peak Power Handling (Watts) 300 Continuous Power Handling (Watts RMS) 150 Sensitivity (1W, 1m) 92 Frequency Response (Hz) 30-21k Height incl. bracket (in, cm) 12-3/8, 31.4 Height from roll bar (in, cm) 9-7/16, 24 Diameter (in, cm) 8-3/16, 20.7 Depth (in, cm) 11-5/16, 28.6 LED Lighting Yes What's in the Box: 2 - full-range speaker enclosuresmounting hardware

Read more less