Monoblock Amplifiers
-
Stetsom BRAVO BASS Flex 8K Mono Class D Car Audio Amplifier
The Stetsom BRAVO BASS Flex 8K is a mono, Class D car audio amplifier featuring an Automatic Impedance System (FLEX) that adjusts its output impedance from 0.5 Ohm to 1 Ohm. It is designed for high-performance BASS and SUB BASS applications. The Bravo Bass Line amplifier is a powerful and high-quality car audio amplifier that delivers an impressive 8000 watts RMS output, designed exclusively for BASS and SUB BASS performance. It features the advanced FLEX – Automatic Impedance System, which intelligently adjusts the amplifier’s impedance from 0.5 to 1 Ohm according to the needs of the connected speakers, ensuring optimal performance and system stability in every setup. To maintain efficient and silent operation, the amplifier is equipped with Smart and Silent Coolers that provide excellent heat dissipation while minimizing noise, allowing the system to perform reliably even under heavy loads. The In/Out Audio RCA connections make it possible to link the amplifier with another unit, offering flexible system expansion for more powerful configurations. Additionally, it supports up to 7 AWG speaker connectors and up to 00 AWG double power and double ground connectors, ensuring strong and stable current flow for consistent output performance. Compact, elegant, and built for automotive sound enthusiasts, the Bravo Bass Line amplifier combines a stylish design with maximum performance in bass and sub-bass reproduction. It fits easily into any car audio setup, delivering deep, clean, and controlled low frequencies that elevate the entire listening experience. Technical Specifications Specification Detail Minimum Output Impedance 0.5 OHM ~ 1 OHM (AUTO) Number of Channels 1 RMS Power @ 14.4V (Output Varies by Auto-Impedance) 8,800W RMS @ 0.5 Ohm 9,000W RMS @ 0.67 Ohm 8,700W RMS @ 0.80 Ohm 9,000W RMS @ 1 Ohm Supply Voltage 9V ~ 17V DC Frequency Response (-3dB) 5Hz ~ 200Hz Crossover Low Pass (LPF) 30Hz ~ 200Hz (Variable) Crossover Subsonic Filter 5Hz ~ 40Hz (Variable) Bass Boost 0dB ~ +10dB (30Hz ~ 70Hz selectable frequency) Signal to Noise Ratio >90 dB Input Sensitivity 0.2V ~ 6V Input Impedance 55K Ohms Musical Consumption 390A BASS Consumption 780A Dimensions (H x W x L) 3.1" x 9.1" x 19.4" Weight 15.6 lb (7.10 Kg) Quantity of Speakers Speaker Impedance Resultant Impedance 2 x speakers 1 OHM 0.5 OHM 4 x speakers 2 OHMS 0.5 OHM 3 x speakers 2 OHMS 0.66 OHM 2 x speakers 2 OHMS 1 OHM 4 x speakers 4 OHMS 1 OHM
$781.99
-
STETSOM BRAVO BASS 8K Mono 1-Channel Class D - 8000 Watts DIGITAL SUBWOOFER AMPLIFIER
Unrivaled Power for Competition Bass The Stetsom BRAVO BASS 8K is the definitive choice for the extreme automotive sound enthusiast, developed for unrivaled performance in BASS and SUB BASS applications. This Class D Mono Amplifier outputs an earth-shattering 8200 Watts RMS at 1 Ohm (14.4V), providing the massive energy required to drive the most demanding subwoofer setups. Engineered for precision and impact, its optimized frequency response spans from 5Hz to 600Hz (Flat ON), ensuring powerful, clean bass that sets a new standard for low-frequency definition. The BRAVO BASS 8K includes a complete suite of professional audio controls, including variable Low Pass and Subsonic Filters, plus a versatile Bass Boost, giving you the ability to fine-tune your system for competition, daily driving, or simply maximum SPL. Despite its colossal power, it maintains a high Signal-to-Noise Ratio (> 90dB) and features a robust Smart Protection System for reliable, high-performance operation. Advanced Control & Competition Features Customizable Bass Impact: The BASS BOOST function offers variable gain from 0dB to +10dB at a selectable frequency between 30Hz and 70Hz to maximize low-end punch. Precision Filtering: Utilize the Low Pass Filter (30Hz ~ 250Hz) and the critical Subsonic Filter (5Hz ~ 40Hz) to protect your subwoofers and prevent reproduction of damaging frequencies. FLAT Mode Switch: Quickly bypass all Crossover and BASS BOOST settings for full-range (up to 600Hz) signal reproduction when desired. Reliability & Protection: Equipped with multiple COOLERs for efficient heat management and a Smart Protection System that monitors for faults like short circuits, overheating, and voltage fluctuations (indicated by the PROT LED). Wiring Recommendation: Due to the extreme power consumption, the use of 00 AWG or larger cables for power and ground connections is strongly recommended for optimal performance and safety. TECHNICAL SPECIFICATIONS CHARACTERISTIC Detail Number of Channels 1 RMS Power @ 1 Ohm (14.4V) 8200W RMS Power @ 2 Ohm (14.4V) 4900W Supply Voltage 9V ~ 17V DC Frequency Response (-3dB) FLAT ON 5Hz ~ 600Hz Frequency Response (-3dB) FLAT OFF 5Hz ~ 250Hz Crossover Low Pass (LPF) 30Hz ~ 250Hz (Variable) Crossover Subsonic Filter 5Hz ~ 40Hz (Variable) Bass Boost $0\text{dB} \sim +10\text{dB}$ (30Hz ~ 70Hz) Signal to Noise >90 dB Input Impedance 4.8K Ohms Musical Consumption 365A BASS Consumption 730A Dimensions (H x W x L) 3.14" x 9.11" x 16.49" Weight 13.22 lbs
$737.99
-
STETSOM BRAVO BASS 3K DIGITAL SUBWOOFER AMPLIFIER
Performance Focused on BASS and SUB BASS The Stetsom BRAVO BASS 3K is engineered for automotive sound lovers demanding maximum performance in BASS and SUB BASS frequencies. This Class D Mono Amplifier delivers a powerful 3000 Watts RMS at 1 Ohm (14.4V), providing the massive low-frequency power required for competition-level sound systems. Its exceptional frequency response, optimized from 8Hz to 600Hz (when FLAT mode is active), ensures powerful bass with clarity and definition for use with subwoofers and woofers. The unit features sophisticated audio controls, including a variable Subsonic Filter and a customizable Bass Boost, allowing for precision tuning and maximum speaker protection. Built with a compact design, the BRAVO BASS 3K offers high efficiency and a reliable Smart Protection System for long-lasting, high-impact performance. Key Features & Audio Controls Precision Crossover: Includes both a Low Pass Filter (30Hz ~ 250Hz) and a Subsonic Filter (8Hz ~ 40Hz) to perfectly match the amplifier to your subwoofers and protect them from damaging ultra-low frequencies. Customizable Bass: The BASS BOOST function offers variable gain from 0dB to +10dB at a selectable frequency between 30Hz and 70Hz, allowing you to dial in your preferred bass impact. FLAT Mode Switch: A convenient switch to instantly bypass all Crossover and BASS BOOST settings for quick configuration or maximum frequency output. Advanced Protection: Features a PROT (Protection) LED and a CLIP LED for quick diagnosis, monitoring for faults like overheating, short circuits, and signal saturation. Optimized Connections: Recommended wiring includes minimum 4 AWG for power and 8 AWG for speaker output (for 1 ohm load), ensuring maximum power transfer and safety. TECHNICAL SPECIFICATIONS CHARACTERISTIC Detail Number of Channels 1 RMS Power @ 1 Ohm (14.4V) 3000W RMS Power @ 2 Ohm (14.4V) 1800W Minimum Output Impedance 1 Ohm Supply Voltage 9V ~ 17V DC Frequency Response (-3dB) FLAT ON 8Hz ~ 600Hz Frequency Response (-3dB) FLAT OFF 8Hz ~ 250Hz Crossover Low Pass (LPF) 30Hz ~ 250Hz (Variable) Crossover Subsonic Filter 8Hz ~ 40Hz (Variable) Bass Boost 0 +10{dB} (30Hz ~ 70Hz) Signal to Noise >90 dB Input Sensitivity 200mV Input Impedance 5K Ohms Musical Consumption 132A BASS Consumption 265A Dimensions (H x W x L) 3.14" x 9.11" x 9.29" Weight 6.3 lbs
$344.99
-
Stetsom BRAVO BASS 5K Mono 1 Channel Class D Digital Subwoofer Amplifier
Massive Power & Precision Bass The Stetsom BRAVO BASS 5K is engineered specifically for automotive sound enthusiasts who demand maximum performance in BASS and SUB BASS. This Class D Mono Amplifier delivers a staggering 5200 Watts RMS at $1 \text{ Ohm}$ $(14.4\text{V})$, ensuring your subwoofers hit those deep, thunderous lows with unmatched power and clarity. With an optimized frequency response of $5\text{Hz}$ to $600\text{Hz}$ (when FLAT mode is ON), this amp provides powerful bass with exceptional definition. It offers advanced control features including a fully adjustable Low Pass Crossover, a precision Subsonic Filter, and a customizable Bass Boost to fine-tune your sound to competition standards. The amp also features a Smart Protection System and dedicated COOLERs to maintain optimal temperature and reliability under intense use. Advanced Control & Reliability Features Bass Boost Control: Variable control for increasing bass from 0dB to +10dB, with frequency selection from 30Hz to 70Hz. Subsonic Filter: Variable control to protect your subwoofers by precisely setting the initial frequency (from 5Hz to 40Hz) that the amplifier will reproduce. FLAT Switch: Allows you to quickly bypass all settings on the CROSSOVER and BASS BOOST controls for maximum frequency reproduction (up to 600Hz). Cooling System: Equipped with internal COOLERs for efficient amplifier cooling. Smart Protection System (PROT LED): Features a protection system that monitors for issues like overheating, short circuits, and low battery voltage, shutting down the amplifier to prevent damage. Recommended Wiring: For maximum power and safety, the manual recommends 00 AWG cable for positive/negative power connections and 7 AWG for speaker output. TECHNICAL SPECIFICATIONS Specification Detail Number of Channels 1 RMS Power @ 1 Ohm (14.4V) 5200W RMS Power @ 2 Ohm (14.4V) 2900W Supply Voltage 9V ~ 17V DC Frequency Response (-3dB) FLAT ON 5Hz ~ 600Hz Frequency Response (-3dB) FLAT OFF 5Hz ~ 250Hz Crossover Low Pass (LPF) 30Hz ~ 250Hz (Variable) Crossover Subsonic Filter 5Hz ~ 40Hz (Variable) Bass Boost 0 ~ +10dB (30Hz ~ 70Hz) Signal to Noise >90 dB Input Impedance 4.8K Ohms Musical Consumption 228A BASS Consumption 456A Dimensions (H x W x L) 3.14" x 9.11" x 13.11" Weight 9.50 lbs
$591.99
-
Sundown Audio Sundown Audio SALT-1 Class D Amplifier
2,000 x 1 @ 2 ohms RMS (when linked) 1,000 x 1 @ 1 ohms RMS mono 500 x 1 @ 2 ohms RMS mono 250 x 1 @ 4 ohms RMS mono Frequency Response : 10 Hz – 250 HZ 24dB variable subsonic filter: 10HZ - 50HZ 24dB variable low pass filter: 35HZ - 250HZ Variable bass boost @ 45Hz 0-9dB Phase shift control 0-180 degrees Power, clipping & protection indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Included wired remote control displays voltage, temperature, and clipping Feel the power of the Sundown SALT-1! This strappable amp delivers a massive 2,000 watts at 2 ohms when attached to another SALT-1, or pump out 1,000 watts at 1 ohm on its own. The amp features both a 24dB variable subsonic and low pass filter, along with a bass boost at 45Hz, letting you dial in your personal, perfect sound. The phase shift control makes it easy to precisely adjust the output. With onboard indicators for power, clipping, and protection you’ll have full control over your setup. Use the included wired remote control to see voltage, temperature, and clipping at a glance.Producing optimum power at realistic voltages (the 12s, rather than needing 14+ volts), the SALT – Sundown Audio Low-Voltage Technology – is Sundown’s answer! SALT amplifiers represent the pinnacle of Korean Class-D amplifier technology. Whether you are a world-class SPL competitor or a hardcore sound quality fan, the SALT series will bang. Specifications Input Sensitivity : 6V - 0.2V Efficiency : 90% < Signal / Noise Ratio : 90DB < Damping Factor : 400 < Phase Shift Control 0-180 Degrees Tested Voltage & THD : 12.8V & Less Than 1% THD Operation Voltage : DC 9V - 15.5V Power Input Recommended Fuse : 120 Amps Dimensions : 6.69” L x 8.67” W x 2.80” H
$549.99
-
DC Audio DC Audio A3 5.0K 5000 Watt Mono Block Car Audio Class D Amplifier/Amp+Bass Knob
The 5.0kw competition series amplifier is a 5,000 watt mono block. It is capable of running up to 18 volts for up to 7,300 watts. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped. It comes with a bass knob and a clipping indicator. For power inputs it will accept dual 0 awg for power and dual 0 awg for ground. Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Variable bass boost • Wired remote control • Clipping indicator • Dual 0 awg power and ground inputs (both must be used) We recommend for installation • 1 upgraded battery under the hood • 1 extra 800ci battery in the rear • Minimum of two 0 awg ran from the front battery to the rear battery • Both 0 awg power and ground inputs on amp must have 0 awg ran to them for a total of 4 runs into the amp • Upgraded aftermarket alternator • Dash mounted voltage meter Specifications Features Voltage 5.0kw Output Power (RMS) 4 ohm 14.4V 900W x 1 2 ohm 2,300W x 1 1 ohm 5,000W x 1 1 ohm 16V 6,000W x 1 1 ohm 18V 7,300W x 1 Input Sensitivity 6V~0.2V Low Pass Filter Switchable ( @ 24 dB Slope) Variable Hz 35~250 Subsonic Filter Switchable ( @ 24dB slope ) Variable Hz 10~50 Bass Boost Variable dB 0-9dB Frequency Response Hz 15-270 Signal to Noise Ratio dB 100 Damping factor 150< Efficiency @ 4ohm % Over 90% THD @ 4ohms Less than 0.1% Fuse Rating 500 Amps Linked Fuse Rating 1000 Amps Indicator Power Yes Protection Yes Clip Yes Speaker & Power terminal Mold Type Yes Power Gauge 0Ga Heatsink Length inch/mm 25.59"/650mm Heatsink Width inch/mm 9.38"/66mm Heatsink Height inch/mm 2.35"/59.6mm Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Variable bass boost • Wired remote control • Clipping indicator • Dual 0 awg power and ground inputs (both must be used)
$2,063.60 $1,649.99
-
Ampere Audio Ampere Audio AA-3K 3,000W Mono Block Car Amplifier – High Power Car Audio Amp
Unleash Serious Performance with the Ampere Audio AA-3K Car Amplifier When it comes to building a powerful bass system, having the right amplifier can make all the difference. Many enthusiasts struggle with amplifiers that promise big numbers but fail to deliver consistent performance when it matters most. Whether you're upgrading your daily driver, building a weekend demo vehicle, or simply looking for reliable power for your subwoofers, you need an amplifier that combines output, efficiency, and control. The Ampere Audio AA-3K was designed to do exactly that. Why Reliable Power Matters An amplifier is the foundation of any subwoofer system. When an amplifier runs out of power, overheats, or clips excessively, performance suffers and your equipment is put at risk. Weak amplifiers can leave subwoofers underpowered, while poorly designed amplifiers often struggle to maintain clean output during demanding listening sessions. The AA-3K eliminates those concerns by delivering a true balance of power and reliability. Built around a high-efficiency Class D platform and engineered with a robust Dual MOSFET PWM power supply, it provides the current your subwoofers need while maintaining stable operation under heavy loads. Built for Bass Enthusiasts The AA-3K is designed to produce up to 3,000 watts RMS at 1 ohm and can be strapped with a second amplifier for an incredible 6,000 watts RMS of combined output. Whether you're powering a single high-performance subwoofer or multiple drivers in a larger system, the AA-3K delivers the authority needed to bring your music to life. Key features include: Dual MOSFET PWM power supply for stable, efficient power delivery Advanced Class D technology for high output with minimal heat Strapping capability for 6,000W performance Wired remote with real-time voltage, temperature, and clipping display Independent crossovers and adjustable phase for precision tuning Control That Lets You Fine-Tune Your System Every vehicle, enclosure, and subwoofer combination is different. That's why the AA-3K includes a complete suite of tuning controls designed to help you get the most from your system. Variable crossover controls allow you to tailor your frequency response, while adjustable phase and bass boost controls help maximize performance based on your installation. The included wired remote gives you real-time access to critical system information, including amplifier voltage, operating temperature, and clipping status. This allows you to monitor performance and make adjustments without leaving the driver's seat. Built to Perform Day After Day The AA-3K was designed for enthusiasts who demand more than just peak numbers. With advanced protection circuitry guarding against thermal overload, voltage fluctuations, speaker shorts, and DC offset, this amplifier is built to withstand the demands of real-world use. Whether you're chasing higher output, upgrading your current setup, or building a system that simply gets loud and stays reliable, the Ampere Audio AA-3K delivers the performance, control, and durability needed to take your bass to the next level. Technical Specifications: Power Output (RMS @ 14.4V): 1 Ohm Mono: 3,000W 2 Ohm Mono: 2,000W 4 Ohm Mono: 1,000W 2 Ohm Strapped (Linked): 6,000W General: Class D Digital Monoblock Design Dual MOSFET PWM Power Supply Efficiency: >94% Input Sensitivity: 6V – 0.2V Frequency Response: 14Hz – 266Hz Signal-to-Noise Ratio: 99dB Damping Factor: >400 THD: <0.1% Working Voltage: 9V – 16.5V Controls & Filters: Low Pass Filter: 35Hz – 250Hz (24dB/Octave) Subsonic Filter: 10Hz – 50Hz (24dB/Octave) Bass Boost: 0 – 9dB @ 45Hz Phase Shift: 0° – 180° Connectivity & Extras: RCA Inputs / Outputs Master / Slave Linking Capability Wired Remote Control with: Voltage Display Temperature Display Clipping Indicator Protection Features: Thermal Protection Voltage Protection Speaker Short Protection DC Offset Protection Fuse Rating: 300A (External – not built-in) Dimensions: 11.81” (L) x 11.82” (W) x 3.06” (H)
$689.99
-
STETSOM BRAVO HQ 800.4 MULTICHANNEL CAR AUDIO DIGITAL AMPLIFIER (2 OHMS STABLE - 800 WATTS RMS)
The BRAVO FULL line was meticulously developed for car audio enthusiasts seeking maximum performance and quality in amplifiers. The Stetsom Bravo HQ 800.4 delivers a robust 800 Watts RMS of power across four independent channels, capable of driving high-fidelity sound. With an expansive frequency response of 5Hz to 22kHz, this amplifier offers exceptional audio quality and definition across the full spectrum. This versatility allows it to be used seamlessly with subwoofers, woofers, drivers, and tweeters, making it the ideal core for a powerful and balanced sound system. Experience high-definition audio in a compact, reliable, and powerful digital package. TECHNICAL SPECIFICATIONS SPECIFICATION Detail Number of Channels 2 Input / 8 Output Graphic Equalizer 15 Bands (gain ±12dB) Graphic EQ Presets 12 (Flat, Loudness, Bass Boost, Rock, etc.) Parametric Equalizer 1 Input + 1 per Output (gain ±12dB, Factor Q 0.4 ~ 10.0) Crossover Filters Butterworth & Linkwitz-Riley (12/18/24/36/48 dB/8ª) Routing A, B, or A+B (per output) Alignment (Delay) 0 ~ 8 ms (275 cm) High Accuracy Phase Inversion 0° ~ 180° Limiter Dynamic Attack-Release System (Threshold: -24 ~ 0 dB) Master Level & Gain 0 ~ 100% (Gain -45 ~ +15 dB per output) Audio Generator 10 Hz ~ 22 kHz (Tone, Sweep, Pink Noise) Latency 1.08 ms Max. Input/Output Voltage 5.6 Vpp (+8.2 dBu) Signal-to-Noise Ratio >90 dB Total Harmonic Dist. (T.H.D) <0.01% Channel Separation >80 dB Frequency Response 10 Hz ~ 22.5 kHz @ -1 dB Power Supply 10 V ~ 15 V DC Max. Current Consumption 450 mA @ 12.6 V DC Dimensions (L x W x H) 200 × 101 × 37 mm (7.9 × 4.0 × 1.5 in)
$206.99
-
Sundown Audio Sundown Audio SALT-1.5 Class D Amplifier
3,000 x 1 @ 2 ohms RMS (when linked) 1,500 x 1 @ 1 ohm RMS mono 750 x 1 @ 2 ohms RMS mono 400 x 1 @ 4 ohms RMS mono 24dB variable subsonic filter: 10HZ - 50HZ 24dB variable low pass filter: 35HZ - 250HZ Variable bass boost @ 45Hz 0-9dB Digital Class-D Linkable Mono Block Amplifier Phase shift control 0-180 degrees Power, clipping & protection indicators included Thermal, voltage, speaker short, and dc-offset protection circuitry Included wired remote control displays voltage, temperature, and clipping Producing optimum power at realistic voltages (the 12s, rather than needing 14+ volts), the SALT – Sundown Audio Low-Voltage Technology – is Sundown’s answer! SALT amplifiers represent the pinnacle of Korean Class-D amplifier technology. Whether you are a world-class SPL competitor or a hardcore sound quality fan, the SALT series will be right at home in your system. Specifications Input Sensitivity : 6V - 0.2V Efficiency : 90% < Signal / Noise Ratio : 90DB < Damping Factor : 400 < Frequency Response : 10 Hz – 250 HZ Tested Voltage & THD : 12.8V & Less Than 1% THD Operation Voltage : DC 9V - 15.5V Power Input Recommended Fuse : 160 Amps Dimensions : 7.87” L x 8.67” W x 2.80” H
$649.99
-
DC Audio DC Audio CS-2100X1 1100 Watt Mono Block Car Audio Class D Amplifier/Amp+Bass Knob
Amplifier Description The DC-CS2100x1 is a compact series amplifier capable of making 2,500 watts. Its High power mono block. It has 1/0 inputs and onboard clipping lights. It also comes with a bass knob and a clipping indicator. Designed to make more power in less space. Output Power (RMS) 4 ohm 1000Wx1 @ 14.4 Volts 2 ohm 1500Wx1 @ 14.4 Volts 1 ohm mono 2100x1 @ 14.4 Volts 1 ohm mono 2450x1 @ 16.0 Volts Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Wired Bass Knob remote control W/ Clip light • RCA Pass Thru • Onboard clip light AMP SPECS: DC Amp Model: CS 2100x1 Input Sensitivity 6V~0.2V Frequency Response 10Hz~250KHz 24dB / Octave Crossover YES Low Pass 35Hz ~ 250Hz Subsonic Filter 10Hz-50hz Bass Boost @45hz NO Phase Shift NO Remote Control Yes Clip Indicator Yes Signal to Noise Ratio dB90 Damping Factor 150< THD @ 4ohms Less than 0.1% Fuse Rating External 250 amp LED Status Lights Power/Protect/Clip Master/Slave NO Heatsink Length 12.99"/330mm Heatsink Width 4.72"/120mm Heatsink Height 1.96"/50.0mm
$399.99
-
Sundown Audio Sundown Audio SAM-1000D Mono Powersports Amplifier
1000 @ 1 ohm 700 @ 2 ohms 400 @ 4 ohms Variable 12dB low pass filter: 50Hz-250Hz Variable 18dB bass boost Power and protection indicators included Thermal, voltage, and speaker short protection circuitry Waterproof (IP67 rated) Sealed wire/signal bulkheads Gasketed audio control cover RCA line out Sundown SAMv.2 amplifiers are ideal for your boat, bike or UTV. Whether you play in the mud, sand, dirt or asphalt, this micro amplifier performs in any weather, and with all the power and acoustic control you need to bang out the bass! SAM amps are IP67 rated, certified to withstand full submersion when getting wild off-road, or when its time to clean up when the fun is done. Ready to go big? With the included line output, it’s easy to add additional amplifiers to the system. Time to ride!
$349.99
-
Sundown Audio Sundown Powersports SAM-600D 600w Mono-Block Marine Micro Class D Amplifier SAMv.2
600 @ 1 ohm 415 @ 2 ohms 230 @ 4 ohms Variable 12dB low pass filter: 50Hz-250Hz Variable 18dB bass boost Power and protection indicators included Thermal, voltage, and speaker short protection circuitry Waterproof (IP67 rated) Sealed wire/signal bulkheads Gasketed audio control cover RCA line out Sundown SAMv.2 amplifiers are ideal for your boat, bike or UTV. Whether you play in the mud, sand, dirt or asphalt, this micro amplifier performs in any weather, and with all the power and acoustic control you need to bang out the bass! SAM amps are IP67 rated, certified to withstand full submersion when getting wild off-road, or when its time to clean up when the fun is done. Ready to go big? With the included line output, it’s easy to add additional amplifiers to the system. Time to ride!
$299.99
-
Kicker Kicker 51KPX5001 KPX500.1 500W Mono Compact Subwoofer Amplifier Motorcycle/UTV
The Kicker KPX500.1 (51KPX5001) is a dedicated mono subwoofer amplifier with a tiny footprint – built to make a motorcycle, UTV or tight-space install hit hard without draining your charging system.Key Features Up to 500 watts x 1 at 1 ohm Extremely compact, weather-resistant chassis that fits under fairings Variable 40–160 Hz low-pass crossover, 24 dB/octave Variable 10–40 Hz subsonic filter, 24 dB/octave Selectable KickEQ bass boost (0/+6 dB at 40 Hz) Compatible with the optional Kicker CXARC remote bass knob A wide input range lets the KPX500.1 connect to virtually any factory or aftermarket radio.Showtime Electronics is an Authorized Kicker Retailer.
$299.99
-
Ampere Audio Ampere Audio AA-5K 5,000W Mono Block Car Amplifier – High Power Car Audio Amp
Take Command of Clean Power with the Ampere Audio AA-5K Car Amplifier When precision and dependability matter just as much as output, the Ampere Audio AA-5K steps up. Designed for daily drivers and competitors alike, this amplifier delivers the ideal balance of power, clarity, and control. Many mid-power amps promise performance — few deliver it without distortion, overheating, or drop-off under load. The AA-5K brings consistency and confidence to systems that demand serious, everyday performance. Power You Can Push Without Fear Anyone who’s ever run an amp at its limit knows how easily things can go wrong: clipped signals, voltage dips, or thermal shutdowns. The AA-5K eliminates those worries with a design that channels energy efficiently and cleanly. It’s built for real-world setups — where music runs long, bass hits hard, and reliability can’t be optional. With Ampere Audio engineering behind it, the AA-5K is tuned for high efficiency, low heat, and dependable stability even at demanding impedances. Built to Perform, Tuned to Impress Delivering up to 5,000 watts RMS at 1 ohm, the AA-5K is a Class D monoblock amplifier that brings serious power to competitive and daily builds alike. When linked, it produces a commanding 10,000 watts, giving you the flexibility to expand or compete as your system grows. Whether you’re after clean lows, responsive control, or show-level sound, the AA-5K delivers it with finesse. Performance highlights: Dual MOSFET PWM power supply for efficient, stable output Class D topology for strong power delivery with minimal heat Strapping capability for 10,000W combined performance Wired remote with real-time voltage, temperature, and clipping display Fully adjustable crossovers and phase control for perfect system alignment Efficient Power with a Purpose The AA-5K gives you full flexibility over your setup — offering independent crossovers, subsonic filtering, and variable phase adjustment. Fine-tune your system to hit harder, cleaner, and more precisely. Combined with Ampere Audio’s high-efficiency power design, it’s made to play louder for longer without fatigue or failure. Whether you’re daily driving or demoing, the AA-5K’s combination of performance, protection, and precision ensures your system stays consistent no matter the conditions. Engineered for Durability, Designed for Enthusiasts From internal component selection to circuit protection, every part of the AA-5K was designed with long-term reliability in mind. Thermal, voltage, and short protection systems keep your investment safe while ensuring uninterrupted performance. If your goal is dependable, clean, and confident power — the AA-5K delivers every time. Technical Specifications: Power Output (RMS @ 14.4V): 1 Ohm Mono: 5,000W 2 Ohm Mono: 3,000W 4 Ohm Mono: 2,000W 2 Ohm Strapped (Linked): 10,000W General: Class D Digital Monoblock Design Dual MOSFET PWM Power Supply Efficiency: >97% (at 4 Ohms) Input Sensitivity: 6V – 0.2V Frequency Response: 14Hz – 265Hz Signal-to-Noise Ratio: 94 dB Damping Factor: >340 THD: <0.1% Working Voltage: 9V – 16.5V Controls & Filters: Low Pass Filter: 35Hz – 250Hz (24 dB/Oct) Subsonic Filter: 10Hz – 50Hz (24 dB/Oct) Bass Boost: 0 – 9 dB @ 45Hz Phase Shift: 0 – 180° Connectivity & Extras: RCA Inputs/Outputs (for Master/Slave Linking) Wired Remote Control with: Voltage Display Temperature Display Clipping Indicator Protection Features: Thermal Voltage Speaker Short DC Offset Fuse Rating: 450A (External – not built-in) Dimensions: 15.74" (L) × 11.82" (W) × 3.06" (H)
$999.99
-
Ampere Audio Ampere Audio AA-8K 8,000W Mono Block Car Amplifier – High Power Car Audio Amp
Command Unstoppable Output with the Ampere Audio AA-8K Car Amplifier When serious competitors chase numbers and clarity, every watt matters. The Ampere Audio AA-8K is built for those who refuse to settle — the demo kings, the SPL warriors, and anyone who lives for precision and power. Many amplifiers can get loud, but few maintain authority and consistency when pushed to the edge. The AA-8K changes that with a design that blends sheer strength with control and endurance. Why Control Is the Real Power An amplifier that’s all muscle and no discipline can become your system’s weakest link. Overheating, clipping, and distorted output don’t just ruin your sound — they can end your gear. The challenge isn’t finding power; it’s finding power that performs flawlessly when demand peaks. That’s why the AA-8K exists. It’s engineered to deliver massive output that stays clean, efficient, and cool. Built around Ampere Audio’s competition-proven platform, it offers precise tuning options, smart protection, and relentless reliability that seasoned competitors trust. Built for Those Who Push the Limits The AA-8K is a Class D monoblock amplifier capable of producing 8,000 watts RMS at 1 ohm — and when strapped, it unleashes a thunderous 16,000 watts. This amplifier isn’t for the faint of heart. It’s designed for systems that demand big current, extreme control, and consistent power delivery. Whether you’re building for the competition lanes or showing off at demo events, the AA-8K delivers the authority your subs deserve. Core performance highlights include: Dual MOSFET PWM power supply for clean, consistent voltage Efficient Class D topology for maximum output and low heat Strapping capability for 16,000W performance Wired remote with live voltage, temperature, and clipping indicators Independent crossover and phase controls for system tuning precision Efficient Power, Confident Performance Brute strength means nothing without control. The AA-8K gives you full command of your setup — with variable crossovers, subsonic filtering, and phase adjustment built in. Whether you’re dialing in your frequency response or monitoring voltage during a full-tilt demo, this amplifier gives you the tools to stay in control of your sound. Its advanced efficiency also means more playing time and less downtime. Run it hard, stay cool, and let your subs deliver clean power hit after hit. Designed to Dominate, Built to Last From the inside out, the Ampere Audio AA-8K was engineered for endurance. With robust components, intelligent protection circuits, and superior thermal design, it’s built to handle extreme conditions and high-demand systems without compromise. If you demand an amplifier that can take abuse, maintain composure, and perform on command — the AA-8K is your competitive advantage. Technical Specifications: Power Output (RMS @ 14.4V): 1 Ohm Mono: 8,000W 2 Ohm Mono: 5,000W 4 Ohm Mono: 3,000W 2 Ohm Strapped (Linked): 16,000W General: Class D Digital Monoblock Design Dual MOSFET PWM Power Supply Efficiency: >97% (at 4 Ohms) Input Sensitivity: 6V – 0.2V Frequency Response: 15Hz – 264Hz Signal-to-Noise Ratio: 94 dB Damping Factor: >400 THD: <0.1% Working Voltage: 9V – 16.5V Controls & Filters: Low Pass Filter: 35Hz – 250Hz (24 dB/Oct) Subsonic Filter: 10Hz – 50Hz (24 dB/Oct) Bass Boost: 0 – 9 dB @ 45Hz Phase Shift: 0 – 180° Connectivity & Extras: RCA Inputs/Outputs (for Master/Slave Linking) Wired Remote Control with: Voltage Display Temperature Display Clipping Indicator Protection Features: Thermal Voltage Speaker Short DC Offset Fuse Rating: 650A (External – not built-in) Dimensions: 19.68" (L) × 11.82" (W) × 3.06" (H)
$1,399.99
-
KICKER 51LX12501 1250W CAR AUDIO MONO-BLOCK CLASS D AMPLIFIER
LX1250.1: Unrivaled Bass Authority and Digital Restoration The KICKER LX1250.1 is a heavyweight monoblock amplifier engineered for those who demand uncompromising low-end power and sophisticated control. As a centerpiece of the premium LX-Series, this amplifier delivers a massive 1250W RMS at 1Ω, providing the raw energy needed to drive the industry’s most demanding subwoofers with absolute composure. Built on a high-efficiency Class-D platform, the LX1250.1 maximizes output while maintaining lower operating temperatures and current draw, ensuring your system hits harder and plays longer without fatigue. True to its "Sound Quality Loud" (SQL) heritage, the LX1250.1 includes the advanced LX Remote Control (LXRC), a multi-functional dash remote that goes far beyond simple volume adjustment. It features SHOCwave 2.0™, KICKER’s second-generation digital restoration algorithm that breathes life back into low frequencies lost in digital compression. The LXRC also provides a real-time "fuel-gauge" style battery voltage readout and a critical output clipping indicator, allowing you to fine-tune your bass response safely from the driver's seat. Designed for the ultimate custom install, the LX1250.1 features a reversible center panel and 11 selectable RGB LED accent colors to match your vehicle's aesthetic. Integration is seamless thanks to FIT+™ technology, which accepts high-level signals up to 40V while utilizing differential inputs to eliminate ground loop noise. With precision tuning tools like the KickEQ+™ parametric bass boost and a 24dB/octave subsonic filter, the LX1250.1 offers the perfect marriage of brute force and surgical accuracy. 51LX12501 Whitepaper PDF TECHNICAL SPECIFICATIONS LX1250.1 MONO AMPLIFIER PERFORMANCE RMS Power @ 1 ohm Mono 1250W x 1 RMS Power @ 2 ohms Mono 750W x 1 RMS Power @ 4 ohms Mono 400W x 1 Dynamic Power 1600 Watts Frequency Response 10 Hz – 160 Hz (+0/-1dB) Signal-to-Noise Ratio >95 dB (a-weighted) Input Sensitivity High Level: 1V–40V / Low Level: 125mV–5V Crossover Slope 24 dB/octave Linkwitz-Riley LX REMOTE CONTROL (LXRC) FEATURES DASH-MOUNTED COMMAND CENTER Bass Restoration SHOCwave 2.0™ Digital Algorithm System Monitoring Battery Voltage (Fuel-Gauge Style) Protection Output Clipping Indicator RGB Control LED Brightness Adjustment Cable Length 19.75 feet (6m) RJ45 Cable TUNING & DIMENSIONS PHYSICAL & PROCESSING SPECS Variable Subsonic Filter 24dB/oct, 10–80Hz KickEQ+™ Parametric Boost 0–6dB (Variable Center 20–80Hz) Dimensions (H x W x L) 2-3/8" x 8-7/16" x 9-7/16" Accent Lighting 11 Selectable RGB LED Colors Warranty 2 Years (Authorized Dealer)
$599.99
-
KICKER 51LX8501 850W CAR AUDIO MONO-BLOCK CLASS D AMPLIFIER
LX850.1: Precision Sub-Harmonic Power and SQL Mastery The KICKER LX850.1 is a high-performance mono-block powerhouse designed to deliver earth-shaking bass with audiophile-grade precision. Engineered from the ground up as part of KICKER's premium SQL line, this amplifier pushes a true 850W RMS at 1Ω, providing the massive current needed to drive high-excursion subwoofers. Utilizing an advanced Class-D topology, the LX850.1 operates with maximum efficiency and minimal heat, ensuring your low-end stays tight and authoritative even during the most demanding listening sessions. Control is the core of the LX850.1 experience, featuring the innovative LX Remote Control (LXRC). This isn't just a volume knob; it’s a command center that puts SHOCwave 2.0™—KICKER’s second-generation digital bass restoration—at your fingertips to recover lost low-bass frequencies. The LXRC also provides real-time monitoring of battery voltage through a fuel-gauge style readout and an output clipping indicator, allowing you to push your system to the limit without risking distortion or equipment damage. Built for the modern installer, the LX850.1 features FIT+™ technology, capable of accepting high-level signals up to 40V while filtering out alternator whine and electrical noise. With a customizable aesthetic featuring 11 RGB LED accent colors and a parametric KickEQ+™ bass boost, this amplifier doesn't just power your music—it defines your entire acoustic environment with unmatched flexibility and legendary KICKER durability. 51LX8501 Whitepaper PDF TECHNICAL SPECIFICATIONS LX850.1 MONO AMPLIFIER PERFORMANCE RMS Power @ 1 ohm Mono 850W x 1 RMS Power @ 2 ohms Mono 500W x 1 RMS Power @ 4 ohms Mono 300W x 1 Dynamic Power 1100 Watts Frequency Response 10 Hz – 160 Hz (+0/-1dB) Signal-to-Noise Ratio >95 dB (a-weighted) Input Sensitivity High Level: 1V–40V / Low Level: 125mV–5V Crossover Slope 24 dB/octave Linkwitz-Riley LX REMOTE CONTROL (LXRC) FEATURES DASH-MOUNTED COMMAND CENTER Bass Restoration SHOCwave 2.0™ Digital Algorithm System Monitoring Battery Voltage (Fuel-Gauge Style) Protection Output Clipping Indicator RGB Control LED Brightness Adjustment Cable Length 19.75 feet (6m) RJ45 Cable TUNING & DIMENSIONS PHYSICAL & PROCESSING SPECS Variable Subsonic Filter 24dB/oct, 10–80Hz KickEQ+™ Parametric Boost 0–6dB (Variable Center 20–80Hz) Dimensions (H x W x L) 2-3/8" x 8-7/16" x 9-7/16" Accent Lighting 11 Selectable RGB LED Colors Warranty 2 Years (Authorized Dealer)
$449.99
-
Sundown Audio SAEv4-5000.1D Amplifier
5,000 x 1 @ 1 ohms RMS 3,300 x 1 @ 2 ohms RMS 2,200 x 1 @ 4 ohms RMS Class D amplifier 12dB variable low pass filter: 40Hz - 180Hz 12dB subsonic filter: 10Hz – 40Hz Phase shift control 0-180 degrees Power, clipping & protection indicators included Heavy aluminum heat sink for improved thermal control Thermal, voltage, speaker short, and dc-offset protection circuitry Wired remote control with clipping indicator The Sundown Audio SAEv4-5000D amp more than just big bass - it's a powerful upgrade for any car audio enthusiast wanting superior sound quality and reliability. This high-performance half-bridge class D amplifier ensures powerful, detailed output. The variable phase, lowpass and subsonic filters provide the control you need - for the sound you love. Featuring robust protection circuitry against thermal, voltage, speaker short, and DC-offset issues, along with power and protection indicators, this amplifier guarantees long-lasting durability, while the heavy aluminum heat sink enhances thermal control, preventing overheating during extended use. The included wired remote with clipping indicator provides real-time monitoring and output control!
$999.99
-
Sundown Audio Horizon HZ-1000 1000 Watt RMS Monoblock Amplifier
Sundown Audio HZ-1000 | Horizon Series 1000W RMS Monoblock AmplifierPowerful. Precise. Built to Perform.The HZ-1000 is everything a mid-tier mono amplifier should be — refined, reliable, and ready to deliver 1000 watts of clean RMS power at 1 ohm. Whether you're upgrading your daily driver, adding a second amp to your system, or running a single sub with serious authority, this Horizon Series amp brings the power you need without the bulk or complexity you don’t.Optimized for real-world installs, the HZ-1000 includes high-level input compatibility, DC Sense for factory integration, and a variable subsonic and low pass filter to keep your low-end crisp and controlled. Its 4-way protection circuit monitors heat, voltage, shorts, and offset, so you can push your system harder without stressing your equipment. The included remote bass knob makes real-time adjustment simple — dial it up when the bass drops, or fine-tune your system from the front seat.From sealed to ported enclosures, factory to custom setups, the HZ-1000 gives you versatility and strength in a compact Class D platform that’s easy to install and built to last. It’s the definition of clean power, simplified.Specs: RMS Power @ 14.4V• 1 Ohm: 1000W• 2 Ohm: 700W• 4 Ohm: 350W Low Pass Filter: 50Hz – 250Hz Subsonic Filter: 10Hz – 50Hz Input Sensitivity: 6V Max Signal-to-Noise Ratio: 95dB Fuse Rating: 100A Dimensions: 9.75" x 4.63" x 2.2" Weight: 3.42 lbs (1.55 kg) Wired Remote Included
$289.99
-
Sundown Audio Horizon HZ-1500 1500 Watt RMS Monoblock Amplifier
Sundown Audio HZ-1500 | Horizon Series 1500W RMS Monoblock AmplifierMore Bass. More Control. All Sundown.Designed for bigger builds and subwoofers that demand more, the HZ-1500 delivers up to 1,500 watts RMS at 1 ohm with low distortion and high efficiency. It’s the top dog of the Horizon Series mono lineup — made to push larger woofers or multiple drivers with clean, relentless power that stays cool and sounds tight.Like its smaller siblings, the HZ-1500 features a robust 4-way protection system, DC Sense, and high-level inputs, giving you full flexibility for installs in both factory and aftermarket environments. Tuning is simple and precise thanks to the onboard low pass filter, subsonic filter, and included wired remote bass knob. You’ll have full control of your low end, whether you’re cruising or competing.For builders and bass lovers who want one amp that hits hard, runs cool, and doesn’t take up half the trunk, the HZ-1500 is a no-brainer. It’s built the Sundown way — to deliver clean power, take abuse, and leave competitors in the dust.Specs: RMS Power @ 14.4V• 1 Ohm: 1500W• 2 Ohm: 800W• 4 Ohm: 450W Low Pass Filter: 50Hz – 250Hz Subsonic Filter: 10Hz – 50Hz Input Sensitivity: 6V Max Signal-to-Noise Ratio: 95dB Fuse Rating: 140A Dimensions: 11.25" x 4.63" x 2.2" Weight: 4.23 lbs (1.92 kg) Remote Bass Control Included
$359.99
-
Sundown Audio Horizon HZ-600 600 Watt RMS Monoblock Amplifier
Sundown Audio HZ-600 | Horizon Series 600W RMS Monoblock AmplifierCompact. Capable. Confident.If you're looking for reliable bass power in a tight package, the HZ-600 delivers. Designed for efficiency and durability, this Class D monoblock amplifier pushes up to 600 watts RMS at 1 ohm, giving you clean, controlled output ideal for daily setups, budget builds, or adding a dedicated sub channel to your system. It's a true performer, offering more power than its size suggests — and doing it with Sundown's trusted engineering.The HZ-600 features high-level input capability and DC Sense turn-on, making it perfect for factory integration or aftermarket installs where space is tight, but quality still matters. A built-in 12dB/octave low pass filter and subsonic filter give you precision control over your frequency range, while the 4-way protection circuit keeps your system safe from voltage issues, short circuits, thermal overload, and DC offset. And with the included wired remote, you get easy control of bass levels from the driver's seat.Whether you're pushing a single sub or upgrading a factory system with a small footprint, the HZ-600 is built to deliver serious performance with no wasted power, no added fluff — just pure bass, clean and simple.Specs: RMS Power @ 14.4V• 1 Ohm: 600W• 2 Ohm: 450W• 4 Ohm: 250W Low Pass Filter: 50Hz – 250Hz (12dB/Oct) Subsonic Filter: 10Hz – 50Hz (12dB/Oct) Input Sensitivity: Up to 6V Signal-to-Noise Ratio: 95dB Operating Voltage: 10.5V – 16.5V Fuse Rating: 60A Dimensions (LxWxH): 9" x 4.63" x 2.2" Weight: 2.78 lbs (1.26 kg) Wired Remote Bass Knob Included
$239.99
-
Kicker Kicker 51LX16501 1650W Car Audio Mono-block Class D Amplifier/Amp
The KICKER LX-Series is a perfect marriage of SQL design and high-powered output, utilizing feedback from the industry to deliver the most requested features while maintaining the highest performance possible. All monoblock amplifiers come with a robust remote level control (LXRC) featuring SHOCwave2.0™. From the Ground Up The LX-Series represents KICKER’s high-power premium amplifier line designed in-house from the ground up. Precision control, next-level flexibility, designed for performance, built to last. Monitor and adjust with the included LXRC Dash Remote Class-D design for lower current draw, longer playing times, and lower operating temperatures Gain-match LEDs show you perfect gain setting KickEQ+™ parametric bass boost 0–6dB Customize the appearance with reversible center panel and choice of 11 RGB LED accent colors Equipped with FIT+™ technology, accepting low- and high-level signals up to 40V, with differential inputs designed to eliminate unwanted noise for crystal-clear sound LX features choice of turn-on modes and comprehensive protections for thermal, circuit, and voltage stability, ensuring reliable performance Comes with the LX REMOTE CONTROL (LXRC) Dynamic fingertip dash remote of bass level adjustment Features SHOCwave2.0™ (Sub-Harmonic Octave Creation), KICKER’s 2nd-gen digital bass restoration algorithm that recovers lost, low-bass frequencies vital to your music selections Displays battery voltage in fuel-gauge-style readout Control of its RGB LED brightness Output clipping indicator to prevent distortion and protect your system Cable Length – 19.75 feet (6m) RJ45 cable LX 1650.1 white paper 51LX16501 Whitepaper PDF RMS Power [Watts Channel] @ 14.4V 1Ω mono: 1650W2Ω mono: 1000W4Ω mono: 550W Dynamic Power [Watts] 2200 Frequency Response [Hz] 10–160, +0/–1dB Signal-to-Noise Ratio(a-weighted, re: rated power) >95dB Signal-to-Noise Ratio(ref: 1W output) >75dB Dimensions [in, cm] Height: 2-3/8 (6 cm) Width: 8-7/16 (21.4 cm)Length: 9-7/16 (24 cm) Input Sensitivity High level 1V–40VLow level 125mV–5V Variable Electronic Crossover LP; 24dB/octave Linkwitz-Riley,variable 40–160Hz Variable Subsonic Filter 24dB/octave Linkwitz-Riley,variable hi-pass @ 10–80Hz KickEQ+™ Parametric Bass Boost 0–6dB, variable center 20–80Hz,variable bandwidth 1–5 Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.
$799.99 $699.99
-
Sundown Audio Sundown Audio SAEv4-3000.1D Amplifier
3,000 x 1 @ 1 ohms RMS 2,000 x 1 @ 2 ohms RMS 1,300 x 1 @ 4 ohms RMS Class D amplifier 12dB variable low pass filter: 40Hz - 180Hz 12dB subsonic filter: 10Hz – 40Hz Phase shift control 0-180 degrees Power, clipping & protection indicators included Heavy aluminum heat sink for improved thermal control Thermal, voltage, speaker short, and dc-offset protection circuitry Wired remote control with clipping indicator The Sundown Audio SAEv4-3000D is a simple, powerful upgrade for any car audio enthusiast seeking superior output and reliability. This high-performance half-bridge class D amplifier ensures powerful, detailed output, with variable phase, lowpass and subsonic filters providing the control you need - for the sound you love. Featuring robust protection circuitry against thermal, voltage, speaker short, and DC-offset issues, along with power and protection indicators, this amplifier guarantees long-lasting durability, while the heavy aluminum heat sink enhances thermal control, preventing overheating during extended use. The included wired remote with clipping indicator provides real-time monitoring and output control!
$699.99
-
DC Audio DC Audio CS-1100X1 1100 Watt Mono Block Car Audio Class D Amplifier/Amp+Bass Knob
Amplifier Description The DC-CS 1000.1 is a compact series amplifier capable of making 1,100 watts. Its High power mono block. It has 4awg inputs and onboard clipping lights. It also comes with a bass knob and a clipping indicator. Designed to make more power in less space. Output Power (RMS) 4 ohm 500Wx1 @ 14.4 Volts 2 ohm 800Wx1 @ 14.4 Volts 1 ohm mono 1100x1 @ 14.4 Volts 1 ohm mono 1400x1 @ 16.0 Volts Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Wired Bass Knob remote control W/ Clip light • RCA Pass Thru • Onboard clip light AMP SPECS: DC Amp Model: CS 1100x1 Input Sensitivity 6V~0.2V Frequency Response 10Hz~250Hz 24dB / Octave Crossover YES Low Pass 35Hz ~ 250Hz Subsonic Filter 10Hz-50hz Bass Boost @45hz NO Phase Shift NO Remote Control Yes Clip Indicator Yes Signal to Noise Ratio dB92 Damping Factor 150< THD @ 4ohms Less than 0.1% Fuse Rating External 100 amp LED Status Lights Power/Protect/Clip Master/Slave NO Heatsink Length 8.27"/210mm Heatsink Width 4.72"/120mm Heatsink Height 1.96"/50.0mm
$349.99
