All Products Except Clearance
-
Kicker Kicker 46CXA18001T 1800W CX Series Mono Block Class D Car Audio Amplifier/Amp CX
CX1800.1 Mono Amplifier CX-Series Amps reach massive power levels thanks to an optimized circuit layout and the highest-grade internal components. Highly efficient heat sinks keep the amp cool with a sophisticated new look. Mono amps offer an optional remote level control to adjust your bass right from the dash. Power Station The CXA1800.1 Mono Amplifier is built for big bass in a sleek, yet affordable package. Using a Class-D power plant and FIT+™ (Fail-safe Integration Technology-PLUS) for superior dependability, this amp features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump with a simple turn of the optional CXARC Remote Bass Controller. CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time! A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. Use the full range outputs to expand your system with other bass amps, or add a full range amp to complete your system. This CX-Series Amplifier delivers as much as 1,800 watts into one bass channel. See below for more details. Efficient Class-D amplifier Three-second turn-on/off delay to eliminate unwanted interference Variable 12dB crossovers provides control to dial in perfect sound KickEQ™ 6dB variable bass boost for those additional low frequencies 24dB subsonic filter for protection from potentially damaging frequencies FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio Accepts up to 40-volt input signal Small footprint for easier installation Compatible with CXARC Remote Bass Control Vertical mounting hardware included for another unique look Specifications MODEL CXA1800.1 Power (watts/ch) 4 Ohm 900x1 Power (watts/ch) 2 Ohm 1800x1 Power (watts/ch) 1 Ohm 1800x1 +/-10% CXRC Remote Bass Capable (sold sep.) yes Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) 14-3/8, 36.4 Frequency Response (Hz): 25-200Hz Input Sensitivity: 250mV-10V (Low Level)1V-40V (High Level) Signal-to-Noise Ratio: 95dB Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave Subsonic Filter: 25Hz @24dB/octave KickEQ™ Boost Variable 0-6dB @40Hz
$549.99 $499.99
-
Sundown Audio Full Tilt HQ Series 2 Male-to-1 Female Y-Splitter RCA Cable
Full Tilt HQ RCA Interconnect Cables 2 Male-to-1 Female Y-Splitter RCA Gold Plated Connectors Color Coded For Easy Installation Tech Flex Cable Protection
$9.99
-
Sundown Audio Full Tilt Audio 100' 18 AWG 100% OFC Remote Wire
The Full Tilt Audio 18ga OFC remote/primary wire is some of the best on the market. Blue Primary Wire 100% Oxygen Free Copper 100' Spool
$9.99
-
ILL Customz ILL Customz Single 1/0 Amplifier Inputs
These amp inputs will work with all amplifiers that come with 1/0 gauge terminals excluding Kicker and Rockford Fosgate. Single 1/0 to 1/0 single inputs will accept 1/0 or 2/0 welding cable as well as oversized 1/0 car audio cable Made from Nickel Plated 6061 aluminum Comes in pairs Comes with free red and black heat shrinks for positive and negative terminal Stainless steel hardware included
$19.99 $17.99
-
Down4Sound Down4Sound JP8 | 800W RMS Monoblock Amplifier
JP8 AMP: 800W PLUS RMS MONOBLOCK Amplifier RMS power, 1ohm : 700W x 1 @ 12v | 850W x 1 @ 14.4v RMS power, 2ohms: 500W x 1 @ 12v |650W x 1 @ 14.4v RMS power, 4ohms : 490W x 1 @ 12v RMS power, 2ohm Linked: 2300W x 1 - 14.4v Frequency Response: 10 Hz - 270 Hz Low Pass Filter: 35 Hz - 250 Hz Subsonic Filter: 10 Hz - 50 Hz Bass Boost: 0 - 9 Db Input sensitivity: 6V - 0.2V signal to Noise Ratio: 97dB < T.H.D @ 4ohm: less than 0.1% Single unit fuse rating: 120A Strapped fuse rating 220A Length (inches) Width x height (inches):11.81" x 7.4"W 2.24" H Damping Factor: 100 8 GA input for Speaker Wire 4 GA input on Power Wire
$199.99
-
Mechman Alternators Mechman 400A Alternator For 2014-21 GM Silverado Sierra Suburban Tahoe Escalade
*Most alternators are custom built to order. Standard build time is 10-14 days.* This unit comes equipped with a smaller 1.75 inch diameter alternator pulley, and will require a slightly shorter drive belt for proper belt tension. Not recommended for sustained use above 5,000 RPM engine speed. ((Check instructions section for finding belt sizes and wiring)). If you DO NOT use the correct shorter belt, this will result in very low to no output and create extra work load for the alternator. Newly redesigned for 2020, The Elite series offers the highest possible amperage and durability available in a large case alternator. 6 phase technology combined with massive twin rectifier assemblies and 12 diodes makes these alternators totally durable for daily use, while still maintaining 200+ amps at engine idle speeds. These alternators use the more robust 4 pin style regulator than the OE 2 pin ECU controlled alternator. There is no extreme voltage fluctuation as this will bypass the RVC charging system on all 2005> GM truck applications. Simply install the included 1 wire P101 harness to a tested 12v switched source and plug in the included P103 module into the vehicles 2 pin original alternator wiring harness. No check battery light, no computer controlled voltage swings. The voltage you want, when you want it! SKU: 14019400B, B14019400 Other options for these vehicles: Mechman 250A Mechman 320A Mechman 370A Fitment Guide: CADILLAC Escalade 5.7 / 6.0 / 6.2 14-18 CHEVROLET Full Size Truck/Silverado 4.3 14-18 CHEVROLET Full Size Truck/Silverado 5.3 14-18 CHEVROLET Full Size Truck/Silverado 6.0 14-16 CHEVROLET Full Size Truck/Silverado 6.2 14-18 CHEVROLET Full Size Truck/Silverado 6.6 Diesel 07 2 pin plug CHEVROLET Full Size Truck/Silverado 6.6 Diesel 08-18 CHEVROLET Suburban All Gas Engines 14-18 CHEVROLET Tahoe/Full Size Blazer All Gas Engines 14-18 GMC Full Size Truck / Sierra 4.3 14-18 GMC Full Size Truck / Sierra 5.3 14-18 GMC Full Size Truck / Sierra 6.0 14-18 GMC Full Size Truck / Sierra 6.2 14-18 GMC Full Size Truck / Sierra 6.6 Diesel 07 2 pin plug GMC Full Size Truck / Sierra 6.6 Diesel 08-18 GMC Yukon All Gas Engines 14-18
$549.00 - $699.00
-
Sparked Innovations Sparked Single Green 12V Round LED Voltmeter-Lighter Size Car Audio/Racing
Universally use this 12VDC Voltmeter with LED display to monitor any 12volt application from marine to automotive dash panels. It’s similar in size to an automotive cigarette lighter mounting hole. IP67 waterproof rating allows it to be used on motorcycles or boats to monitor battery voltage. Circular housing makes it easy to mount. 12-Volt DC Voltmeter: GREEN LED Dual USB charge ports. 4.2A total for fast charge. Universal for any 12-volt project. Easily fits in dash panels. Similar in size to a cigarette lighter. Waterproofing allows it to be used on motorcycles or boats to monitor battery voltage. Circular housing makes it easy to mount. USB takes your 12v DC systems and converts it to 5v for USB charging. Comes with rubber cover for USB ports Specifications 5-15v DC operation range 3 digit digital display (Red) Anti-reverse, anti-short circuit protection ABS and nylon housing. Impact resistant and IP67 rated for water submersion up to 1 meter Operating temp -25~80C Accuracy class 0.1 Mounting hole diameter – 29.2mm Overall diameter – 36.5mm Mounting depth – 46mm including terminals Digit height – 6.5mm Showtime Electronics is an Authorized Sparked Innovations Dealer
$9.99
-
$21.99
-
XS Power XS Power XP3000 12V 3000 Amp Deep Cycle AGM Battery/Power Cell
12-Volt AGM Secondary Battery Group 31 Max Amps: 3,000 Wattage: 3,000 Reserve Capacity: 240 minutes M6 Terminal Hardware Incl. Two Year Warranty Use the XS Power XP3000 as an additional 3,000-watt power plant just waiting to be tapped. Using Absorbent Glass Mat (AGM) technology, it easily delivers all the energy you need for aftermarket accessories like light bars, power inverters, winches, an audio system, or other electronics. Its sealed construction keeps it completely safe from spills and moisture even on the roughest trip.See the specifications below.12V BCI Group 31, AGM Secondary Battery
$439.99
-
315 Custom Audio Aluminum Bass Knob
315 proudly introduces our newest budget friendly bass knob. Made out aluminum alloy will you be ready to unleash the bass? Our knobs include one of the smoothest potentiometers in the field today with 24 inch high quality tiffany style RCAs. available in multiple colors. Not to big not to small our knob fits perfectly in the hand for complete control of your bass. Please allow 5 to 7 business days to ship.
$60.00
-
Sparked Innovations Sparked Single Blue 12V Round LED Voltmeter-Lighter Size Car Audio/Racing
Universally use this 12VDC Voltmeter with LED display to monitor any 12volt application from marine to automotive dash panels. It’s similar in size to an automotive cigarette lighter mounting hole. IP67 waterproof rating allows it to be used on motorcycles or boats to monitor battery voltage. Circular housing makes it easy to mount. 12-Volt DC Voltmeter: BLUE LED Dual USB charge ports. 4.2A total for fast charge. Universal for any 12-volt project. Easily fits in dash panels. Similar in size to a cigarette lighter. Waterproofing allows it to be used on motorcycles or boats to monitor battery voltage. Circular housing makes it easy to mount. USB takes your 12v DC systems and converts it to 5v for USB charging. Comes with rubber cover for USB ports Specifications 5-15v DC operation range 3 digit digital display (Red) Anti-reverse, anti-short circuit protection ABS and nylon housing. Impact resistant and IP67 rated for water submersion up to 1 meter Operating temp -25~80C Accuracy class 0.1 Mounting hole diameter – 29.2mm Overall diameter – 36.5mm Mounting depth – 46mm including terminals Digit height – 6.5mm Showtime Electronics is an Authorized Sparked Innovations Dealer
$9.99
-
XS Power XS Power Li1208 12V 8A Lithium Charger
12 Volt Lithium Charger 8 Amps LED Charging & Status Indicators Microprocessor-Optimized Charging Constant Current/Constant Voltage Charger Auto Under-Voltage/10-Hour Shutoff Battery Reverse/Short Circuit/Overload Protection Integrated Cooling Fan This eight-amp IntelliCharger is equipped with an advanced microprocessor to quickly and safely recharge 12-volt lithium-ion batteries. The charger automatically measures progress to optimize charging performance, so you get the fastest charge possible without overcharging the battery. The integrated multicolor LEDs tell you when your battery is charging, and when it’s ready to go!See details below.High Frequency Lithium Battery IntelliCharger
$139.99
-
Ampere Audio Ampere Audio AA-6.5c Component 6.5" Car Speakers
100w 6.5" Component Set The Ampere Audio 6.5c Dream Series speaker system features a 25mm silk dome tweeter that resides in a hardened plastic housing. The 6.5” midrange also features a single roll surround that eliminates unwanted resonances, acoustical artifacts and dampens mechanical vibrations. The tweeter and midrange have been specifically engineered with complex FEA analysis that perfectly optimizes the motor structures. Engineering a great tweeter and midrange is not enough to guarantee excellent sound quality so we added a touch of SQ Dust. The overall result is a smooth, linear musical output with excellent spectral clarity without delivering overly bright or fatiguing high frequencies commonly found in most car audio component systems. The Dream Series speaker system provides a dynamic range and a life like musical realism that would please just about any audiophile. Features 25mm Silk Dome Tweeter Fully Machined Hardened Plastic Tweeter Housing Dampened Pressed Paper Cone Smooth Termination Single Rubber Surround Powder Coated Aluminum Basket Custom Tooled Crossover with Direct Wiring Connections Audiophile 5 kHz Crossover with Tweeter Integrated Non Resonating Phase Plug Inter woven Tinsel Leads High Temperature CAE/CAD Motor Structure Specifications RMS Power: 100W Peak Power: 150W Nominal Impedance: 4 ohms Fs: 89.57 BL: 5.5 Qms: 4.29 Qes: 0.708 Qts: 0.608 SPL: 90.2 Vas: 6.629 Cms: 281.92 Mms: 11.17 Our Recommendation The Ampere Audio AA-6.5c is a perfect match for our class A/B AA-75.4 4-channel amplifier. Get them both to see what perfection sounds like!
$199.00 $79.99
-
Mechman Alternators Mechman 400A Alternator for GM Trucks 96-07- Silverado Sierra Escalade Tahoe
*Most alternators are custom built to order. Standard build time is 10-14 days.* The Elite series 400 amp alternator offers great amperage output and durability at a great price. 6 phase technology, combined with massive twin rectifier assemblies and 12 huge diodes make these alternators totally durable for daily use. These impressive alternators produce 200+ at engine idle RPM and 400+ amps at cruising speeds HOT RATED. Like most high output alternators, this unit comes with a smaller diameter pulley, and will require a 1/2 inch to one inch shorter than stock length belt for proper belt tension in most applications. Installation Notes: This unit may require an additional rectangle to oval adapter harness if the vehicle was originally equipped with the CS144 Heavy duty charging option from the factory. (this is not common) This unit is a direct plug in for any truck originally equipped with the more common oval shaped 4 pin plug as shown below. SKU-8206400, B8206400 Too much sauce? Check out the 250A for these vehicles! Installation Notes: This unit comes equipped with a smaller 1.75 inch diameter alternator pulley, and will require a slightly shorter drive belt for proper belt tension. Not recommended for sustained use above 5,000 RPM engine speed. Fitment Guide: Make Model Engine Size Year Buick Rainier 5.3L 2004 - 2006 Cadillac Escalade 5.7 / 6.0 / 6.2 1999 - 2004 Chevrolet Astro Van 4.3L 1996 - 2005 Chevrolet Avalanche All Engines 2002 - 2004 Chevrolet Camaro 5.0 / 5.7 1998 - 2002 Chevrolet Express Van w/4 pin plug 1996 - 2016 Chevrolet Full Size Truck All Gas Engines 1996 - 2004 Chevrolet Full Size Truck 6.6L Duramax 2001 - 2007 Chevrolet S-10 / Blazer 4.3L 1994 - 2004 Chevrolet SSR 5.3 / 6.0 2003 - 2006 Chevrolet Suburban w/4 pin plug 1996 - 2004 Chevrolet Tahoe/Full Size Blazer All Gas Engines 1996 - 2004 Chevrolet Trailblazer 5.3L 2003 - 2006 GMC Envoy 5.3L 2003 - 2006 GMC Full Size Truck / Sierra 4.3L 1996 - 2004 GMC Full Size Truck / Sierra 4.8L 1999 - 2004 GMC Full Size Truck / Sierra 5.0L 1996 - 1999 GMC Full Size Truck / Sierra 5.3L 1999 - 2004 GMC Full Size Truck / Sierra 5.7L 1996 - 2000 GMC Full Size Truck / Sierra 6.0L 1999 - 2005 GMC Full Size Truck / Sierra 6.6 Diesel 2001 - 2006 GMC Full Size Truck / Sierra 7.4L 1996 - 2000 GMC Full Size Truck / Sierra 8.1L 2001 - 2005 GMC Safari 4.3L 1994 - 2004 GMC Savana Van w/ 4 pin oval plug 1996 - 2016 GMC Suburban w/ Oval plug 1996 - 2004 GMC Yukon w/ Oval plug 1996 - 2004 Hummer H2 6.0L 2003 - 2007 Oldsmobile Bravada 4.3L 1994 - 2001 Pontiac Firebird 5.0 / 5.7 1998 - 2002
$549.00 - $699.00
-
Sparked Innovations Sparked Innovations Speedie Link Cable
Easily connect your Speedie Fan Speed Controller or Speedie Fan Speed Controller w/Remote to your Sparked Innovations Fannie using this 10ft extension cable for plug and play installation.
$9.99
-
DS18 DS18 PRO-EXL Series PRO-EXL104 10" 1000 Watt 4-Ohm Midrange Car Audio Speaker
The people who live and breathe car audio demanded a higher-performing, extremely effective, and dynamic product series. After several months, and money allocated to R&D, DS18 is proud to launch the PRO-EXL Extremely Loud midrange series. They are the epitome of competition-quality midranges. Red aluminum baskets, cloth-edges, non-pressed paper cone, and the option for 8 ohm or 4 ohm impedance; these are only the basic components, the rest is pure DS18 technology. Model: PRO-EXL104 Type: Midbass Loudspeaker Size: 10" RMS Power: 600W MAX Power: 1000W Frequency Response: 72Hz-8KHz Impedance: 4 ohm Sensitivity: 96dB Materials Surround: Cloth Edge Frame: Red Aluminum Basket Cone: Non-Pressed Paper Cone Magnet: Ferrite Voice Coil Wire: KCCAW Diameters Voice Coil Size: 3" Magnet Size: 80 oz Mounting Depth: 4.68" (119mm) Cut-Out Dimension: 9.21" (234mm) Net Weight: 6.9 kg
$179.95
-
Sundown Audio X-Series XV4 15" 3000W RMS Subwoofer
The Sundown Audio XV4 15″ Subwoofer delivers the ultimate low-frequency experience for serious bass lovers. Built with the advanced X v.4 coil design, this subwoofer offers extreme power handling and consistent performance under heavy loads. With up to 3000W RMS and 6000W peak power, it ensures clean, distortion-free sound even at the highest volumes. The durable motor structure and optimized cone area (72.58 in²) provide deeper lows and better air displacement for maximum sound pressure. Engineered for flexibility, the XV4 15″ works best in ported enclosures (4.25 cu ft, tuned to 32 Hz) but can also be customized for complex box designs like 4th order setups. Every element — from the high-grade magnet to the precision voice coil — is crafted to deliver unmatched performance and reliability. Perfect for audiophiles and competitors seeking solid bass impact, this subwoofer combines engineering excellence and raw power in one package. Key Features 15″ high-performance subwoofer with X v.4 coils 3000W RMS / 6000W peak power handling 30mm Xmax for strong linear excursion Optimized motor design (9.25″ diameter) Recommended ported box: 4.25 cu ft @ 32 Hz Robust cone design for high SPL output Ideal for competitive and high-end car audio systems
$849.99
-
Sundown Audio Stereo Integrity SIQ 200.2 High-Fidelity 2-Channel Amplifier
Stereo Integrity SIQ 200.2 Amplifier: Purity and Power in Two ChannelsThe Stereo Integrity SIQ 200.2 brings true high-fidelity audio engineering back to mobile sound systems. Built by audiophiles for the most discerning listeners, this powerful 2-Channel Class A/B amplifier prioritizes signal integrity above all else. Its design features zero filters, zero crossovers, and zero EQ, delivering a full bandwidth signal (5 Hz to 150,000 Hz) that is clean, precise, and uncompromised. This is the foundation for an accurate soundstage and breathtaking sonic detail.Uncompromised Audiophile ConstructionEvery component in the SIQ 200.2 was selected based on its acoustic performance and long-term durability: Output Transistors: Utilizes audiophile-grade TO-3 output transistors for clean, linear power delivery. Internal Circuitry: Features high-quality UPC4570 op-amps, IRFPO64N power supply transistors, and sand cast resistors throughout the construction. Aesthetics: Protected by a thick extruded aluminum chassis with a copper anodized shielded transformer cover to minimize electromagnetic interference, all visible through a large plexiglass viewing window. High Power, Ultra-Low Distortion PerformanceThe SIQ 200.2 delivers robust power with unmatched fidelity, validated by Audio Precision measurements: Rated RMS Power Output (2 Channels): 200W RMS x2 @ 4Ω High Current Output: 400W RMS x2 @ 2Ω Bridged Monoblock Power: 800W RMS x1 @ 4Ω Total Harmonic Distortion (THD): 0.03 % (Exceptional clarity) Signal-to-Noise Ratio (SNR): 92 dB Installation and Specifications Purity Control: Features a discrete gain knob per channel for precise level matching. Connections: Premium Tiffany-style RCA connections accepting inputs up to 16 Volts. Dimensions: Compact size at 14 x 8 x 2 Inches. Current Draw: Maximum current draw of 85.6 amps. The SIQ 200.2 is the ultimate 2-channel solution for audiophiles seeking true, powerful sound reproduction in their vehicle. Amplifiers Specifications Frequency Response Minimum 5 Hz Frequency Response Maximum 150,000 Hz Signal-to-Noise Ratio (SNR) 92 dB Total Harmonic Distortion (THD) 0.03 % Dimensions (W x H x D) 14 x 8 x 2 Inches Rated RMS power output into all 4 channels at 4 ohm 200 Watts Rated RMS power output into all 4 channels at 2 ohm 400 Watts Bridged RMS power into 2 channels at 4 ohm 800 Watts Power Idle Current Draw 1.3 amps Maximum Current Draw 85.6 amps Connections RCA Input Maximum 16 Volts
$359.00
-
Sundown Audio Full Tilt Audio Fuse Holder
Fuse Holder ANL Fuse Fitment Fits 1/0 AWG or 4 AWG Cable Silver Finish with Clear Cover Set Screw Connection
$5.99
-
Clarion Clarion FZ309 Single-DIN Multimedia Receiver USB, AUX, Bluetooth
Features Built-in Bluetooth® Hands-free and Audio Streaming Superior iPod® and iPhone® Connectivity Front AUX Input Lets You Easily Connect to External Sources Beat EQ for Customizable Sound 4-Channel / 2 Volt RCA Output Low Pass Filter for Subwoofer
$199.99 $89.99
-
SMD Steve Meade Designs Steve Meade SMD IM-SG+ Impedance Meter / Signal Generator PLUS IMSG
Some uses of the D’Amore Engineering / SMD IM-SG+ (Impedance Meter / Signal Generator PLUS). Precision AC Impedance Meter - Frequency range: 10hz-20khz All New Auto-lock feature does the stopping (top or bottom) for you! Low, Mid, High frequency range for more precision. New, Super smooth operation of the frequency knob Min/Max impedance hold function Obtain a driver's T/S Parameters* Quickly and safely locate stock speakers (and locations) in the vehicle. Determine speaker crossover set points Find tuning frequency of passive radiator Quickly determine frequency of any enclosure (sealed, ported, bandpass, etc) using Auto-lock Quickly find the Fs of any speaker using auto-lock for proper tuning of that driver. Find box volume, even odd shaped sealed enclosures! Test impedance of long wire runs Test impedance of RCA Cables (down to 10milliohms) Find crossover frequency of passive crossover networks** Locate annoying rattles in vehicle Easily output any frequency to an amplifiers input, and amplify it. Quickly and easily determine frequency changes to an enclosure after modifying the volume or adding/removing polyfill Pink noise generator Used in conjunction with an SMD AMM-1, quickly determine "box rise" at a specified frequency. Improved battery life, Double that of the original IMSG! *When used with D'Amore Engineering software **When used in conjunction with CC-1
$453.98
-
Kicker Kicker 47KSC6804 6" x 8" 6x8 75W 2-Way Coaxial Car Audio Speakers KSC KS
KICKER’s elite KS-Series Coaxial Speakers upgrade your audio to new levels of accuracy with extended frequency response and the smoothest highs. Potent Performance KICKER KS-Series Speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. Internally dampened polypropylene cones and durable rubber surrounds assist the woofers in creating precise midrange and midbass, while high-quality silk-dome tweeters deliver natural, detailed highs. With less than a 2.5-inch mounting depth and zero tweeter protrusion, the KSC680 is a perfect fit in almost every vehicle on the road today, including 5 x 7-inch speaker holes. They work best with 15 to 75 watts of recommended power. See below for more details. High power handling Silk-dome tweeters for a smooth sound Polypropylene woofer and tough rubber surrounds Thin-mount design easily fits behind factory grilles Specifications Speaker Design 2-Way Woofer [in, mm] 6 x 8, 160 x 200 Tweeter [in, mm] ¾, 20 Rated Impedance [Ω] 4 Recommended Amplifier Power [Watts RMS] 15-75 Sensitivity [1W, 1m] 90 Frequency Response [Hz] 45-21k Mounting Hole Diameter [in, mm] 5 x 7-3/16, 127 x 182 Top Mount Depth [in, mm] 2-1/4, 58 Bottom Mount Depth [in,mm] 2-5/8, 67 Tweeter Protrusion [in,mm] 1/16, 2 Grilles No Tweeter Magnet Material Neodymium Tweeter Dome Material Silk Woofer Cone Material Polypropylene Woofer Surround Material Rubber
$129.95 $89.99
-
Sundown Audio X-Series XV4 12" 3000W RMS Subwoofer
The Sundown Audio Xv4 12" Subwoofer is built for those who demand real power and precision in their sound system. Designed with premium Xv4 coils, this subwoofer delivers a massive 3000W RMS and 6000W peak power while maintaining outstanding clarity and control. With a durable, heavy-duty motor and optimized cooling system, the Xv4 ensures consistent performance even during extended play. Whether you’re upgrading your car audio or building a competition-level system, this subwoofer delivers thunderous low frequencies that stay tight and accurate. The precision-engineered cone and suspension system provide minimal distortion and maximum output. Pair it with a well-tuned ported enclosure for deep, room-shaking bass that brings your music to life. Built to handle extreme sound pressure, the Xv4 series continues Sundown Audio’s legacy of reliability, innovation, and unmatched performance. Key Features 12-inch subwoofer with Xv4 voice coils RMS Power: 3000W, Peak Power: 6000W Available in Dual 1Ω and Dual 2Ω versions High-efficiency motor structure with strong BL factor Optimized for ported enclosures (2.5 cu. ft @ 32Hz) Xmax: 30mm for deep excursion and accurate bass Reinforced cone for durability under extreme pressure Designed for audiophiles and SPL enthusiasts
$799.99
-
Sundown Audio SA-Series SA-3M 3" Speaker
The all-new 2025 Sundown SA speaker series has been designed to make a statement. What statement, you may ask? That Sundown Audio can be just as serious about SQ as we are about SPL. Many people already know this but our subwoofers – even the ones used for crushing demos – have some of the lowest distortion on the market. We are now bringing our unique approach to the more dedicated Sound Quality market.Starting at the upper end of the frequency spectrum we have the SA-1T Tweeter. The SA-1T features a 25.5mm silk dome (total 38mm including surround) driven by a powerful neodymium motor structure. The dome features a compact, tuned back chamber which helps it to achieve its extremely low FS around 700hz. This gives you an enormous amount of flexibility in choosing the crossover. The tweeter can be used as a 2-way with the 6.5M or the 8M models or as part of a three way with either and the 3M model. In addition to the low FS and smooth response the SA-1T has a very high 92dB sensitivity so it doesn't take much power to get loud enough for just about anyone. The SA-1T is the 4th generation SA tweeter building on the success of the tweeter found in the SA Component sets over three generations.Headed down the spectrum to the midrange we have the SA-3M. This "little" unit is something incredibly special and is a favorite project of lead product designer / founder Jacob Fuller. We really went all-out on this unit to address the "big 3" drivers of distortion. The SA-3M features 4.5mm of one-way linear excursion by 70% BL (with 8mm x-mech thanks to the custom tooled frame – so no bottoming out even on powerful dynamics) and over 6mm by CMS and LE definitions on Klippel. There is essentially NO risk of the driver reaching linearity limits in most applications. The beefy motor structure is a combination of ferrite and a neodymium pole cap magnet to help us reach 84.5dB sensitivity at 1-watt. There is a double LE treatment internal to the motor via both a copper pole sleeve and an aluminum magnet ID shorting ring allowing the SA-3M to play full-range to beyond 20khz (although, for several reasons, we do suggest using a tweeter for the top-end). On the bottom end they can be high-pass crossed over at 300hz effortlessly with 150-watts of power handling (thanks to the 28mm diameter, extra-long voice coil) or even lower if needed, with less power, due to the incredibly high linear stroke. The suspension system, surround and spider, of the SA-3M took over a year of FEA simulations and testing to reach perfection and is just as important as the motor to the resulting low distortion. We gave the suspension just as much attention as we would for a full blown high-stroke subwoofer. To finish off this masterpiece we tested several different types of woven carbon fiber cones & dust caps to achieve the best FR possible.To finish off the 2025 SA speaker line we created the SA-6.5M and the SA-8M. Both of which can be used as a mid-bass or mid-range speaker depending on your application. Both drivers feature the same attention to detail as the 3M regarding the carbon cone and dust cap, surround, and spider. All of these parts were fully FEA simulated and Klippel verified.The SA-6.5M features 5.9mm one-way linear excursion by 70% BL, 7mm by CMS, and 6.28mm by LE on Klippel. Thanks to the efficient motor venting and ample voice coil the power handling is rated for 110-watts full range / 200-watts with a 70hz HPF filter with a respectable 89dB sensitivity. As with the SA-1T this is a 4th generation SA speaker due to the SA component set from prior generations. For this iteration we optimized it further and also created a new custom-tooled frame. The revised frame is more aerodynamics and also allows for superior coil ventilation. As with most Sundown products you will find a thick magnet-ID Faraday ring as well.Last, but absolutely not least, we have the SA-8M which takes linear stroke to yet another level. We were able to achieve 9mm one-way linear by 70% BL and nearly 10mm by CMS and LE standards. As with the 3M, the 8M features a pole sleeve and magnet ID faraday ring for LE treatment. This unit is an absolute powerhouse for mid-bass, and we believe it will make big waves in the SQ world. On the output side it has a 91.5dB sensitivity and will handle 130-watts full-range / 250-watts with a 70Hz HPF thanks to the efficient motor venting and huge 2" coil. The SA-8M is all-in on SQ and output potential – the Sundown way! Sold As A Pair Includes Metal Grille Built as Full Range with lot of low end extension 30W RMS 150W RMS @HPF 300hz+ Cutout: 3.1" Outer Diameter: 3.6" Depth: 1.91"
$219.99
