8" Speakers

Features Sold Individually Power Handling: 100 Watts RMS Impedance: 4/8 Ohm Frequency Range: 120Hz - 6kHz Phase Plug Outside Diameter: 8.25" Cutout Diameter: 7.125" Mounting Depth: 3.50" Effective surface area,Sd: 12.469Mm*

Read more less

Specifications Model MW-80 Type Midbass Size 8" Frequency response 60 - 6000 Hz Package quantity Pair Voice coil size 2.00" Cone Paper Magnet Ferrite Voice coil wire CCAW Surround Cloth RMS Power 175 W MAX Power 350 W Frame Steel Impedance 4 Ohm SPL 93.50 dB Fs 75.00 Hz Qts 0.56 BL 7.50 Re 3.8 Vas 10.50 L Mounting depth 2.95" (75.0 mm) Cut-out dimension 7.20" (183.0 mm) Gross weight 13.23 lb (6.00 kg)

Read more less

 During the focused R&D period of perfecting the PRO-X line, DS18 identified the opportunity to spawn off another line since there was a division amongst competition audiophiles and concert/"voceteo" audiophiles. Therefore, DS18 created that PRO-X audio line, which features a wide variety of midranges the produce concert-like sounds that will knock the wind out of you! Highlights DS18's most sold series of High Powered pro audio. Great DS18 design of high durability parts including strong ferrite magnet, pressed paper cone, and CCA voice coils to get you maximum loudness with great sound quality. BM stands for BULLET! This includes a resonator (tweeter) with red bullet design to give the speaker a much higher range of frequencies.

Read more less

MLM-804ND 8" Neo Mid 4-Ohm For car audio enthusiasts seeking an upgrade over traditional, Mc Laren Sound Systems has designed 3 series of midbass & midrange drivers. Depending on size, depth, frequencies you have a wide range of options to suit your listening preferences.   The NEO Series are our flagship design. Light weight and shallow that offers a concert sound in a flat design that can virtually fit anywhere.   Specs:   8" (203.2mm). 200 wts rms, 400 wts peak. 2" Copper voice coil. 4 Ohms . N42H Neodymium magnet. Stamped steel frame. Freq range: 100 Hz - 5KHz   Parameters:   Impedance (ohms) 4 Resistance (ohms) 3.6 SPL (dB) 94.1 FS (Hz) 134.95 Vas (L) 5.62 Qes 0.819 Qms 2.92 Qts 0.639 BL (NA) 11.508 Mms (Grams) 17.283 Cms (mm/N) 0.805   Mounting Depth  " Total Depth  2  5/16" Cut-Out diameter  "

Read more less

Product Overview: High-Output Coaxial Loudspeaker The new Audio Ace Diamond X8 is a high-efficiency coaxial speaker that blends the powerful mid-range response of a Pro Audio driver with the clarity of an integrated tweeter for a full and vibrant sound. Conservatively rated at 180W RMS, this 8-inch coaxial speaker is designed for maximum acoustic output, boasting a high 98 dB sensitivity (SPL). It features a 1.52-inch voice coil and a substantial 34.3 Oz motor within a custom-tooled basket bearing the Audio Ace logo. With a wide frequency range of 80 Hz to 20 kHz and a 4 Ohm impedance, the Diamond X8 is a premium option for those seeking high-volume performance across the entire audible spectrum. Available in Black or White options.   AUDIO ACE DIAMOND X8 COAXIAL MID RANGE SPECIFICATIONS Type Coaxial Mid Range Loudspeaker Size 8 Inches RMS Power Handling 180 Watts Nominal Impedance 4 Ohm Voice Coil 1.52 Inches Motor Weight 34.3 Oz Sensitivity 98 dB Frequency Range 80 - 20k Hz Maximum Excursion (Xmax) 1.75 Mounting Depth 3 5/8 Inches Overall Diameter 8 1/4 Inches Available Colors Black or White THIELE-SMALL PARAMETERS Sensitivity (SPL) 98 dB Electrical Q (Qes) 0.373 Mechanical Q (Qms) 5.848 Total Q (Qts) 0.351 Resonance Frequency (Fs) 88 Hz Effective Piston Area (SD) 213.82 DC Resistance (Re) 4 Ohms BL Factor (BL) 8.323

Read more less

The Ciare 8A250M-8 is a precision-engineered 8-inch midrange driver tailored for high-fidelity and professional sound systems that demand clarity, tonal balance, and long-term reliability. Positioned in 2- or 3-way speaker systems, PA mid-sections, or high-end home audio enclosures, the 8A250M-8 handles vocal and instrument reproduction with naturalness and transparency. With a 1.5″ copper voice coil wound on a polyimide former, supported by a robust ferrite magnet and sturdy steel frame, this driver is built to deliver consistent performance under load. Its design ensures low distortion even during high-excursion passages, giving crisp midrange detail without harshness. The 8-ohm impedance makes it suitable for systems with moderate loading, allowing flexible crossover implementation and compatibility with a variety of amplifiers. Audio designers and OEMs will value this model for its combination of musical neutrality, mechanical durability, and proven Ciare “Americano” series heritage. Whether for installation in pro audio, custom cabinetry or hi-fi applications, the 8A250M-8 brings midrange finesse and reliability into any system. Specifications: Driver Type / Category: 8″ (203 mm) Midrange Series: Ciare “Americano” Nominal Impedance: 8 Ω  Power Handling (Program): 250 W  Voice Coil: 1.5″ (38 mm) copper (polyimide former)  Magnet: Ferrite  Frame / Basket: Rugged steel  Overall Diameter: 203 mm (8″)  Other Features: • Designed for linear excursion, minimal distortion in the midrange band   • Mechanical robustness, capable of handling thermal and mechanical stress 

Read more less

  Power Handling: 130W-320W Watts RMS 4 or 8 Ohms Carbon fiber cone Neodymium motor Spring loaded terminals Sold Individually Neo motors and carbon fiber cones – there’s nothing better!  Made specifically for car audio PA systems, we chose a carbon-fiber cone to handle high SPL systems without breakup, then joined it with a vented, high strength neodymium motor to deliver amazing volume and clarity. 

Read more less

Product Overview: High-Sensitivity Pro Audio Performance The Audio Ace Diamond 8" mid-range driver is designed to deliver the high-volume characteristics of a professional audio speaker within a car audio environment. This 8-inch driver is conservatively rated at 180W RMS and is built to play louder than most mid-range speakers in its class, boasting a high 94 dB sensitivity. It features a 1.52-inch voice coil, a 26 Oz magnet motor, and a custom-tooled basket with the Audio Ace logo, ensuring durability and style. With a frequency range of 80 Hz to 13 kHz and a nominal 4 Ohm impedance, the Diamond 8" provides a powerful and clear mid-frequency anchor for your system.   AUDIO ACE DIAMOND 8" MID RANGE SPECIFICATIONS Size 8 Inches RMS Power Handling 180 Watts Nominal Impedance 4 Ohm Voice Coil 1.52 Inch Magnet Weight 26 Oz Sensitivity 94 dB Frequency Range 80 - 13k Hz Mounting Depth 3 1/4 Inches Overall Diameter 8 1/4 Inches Maximum Excursion (Xmax) 1.75 THIELE-SMALL PARAMETERS Sensitivity (SPL) 96 dB Electrical Q (Qes) 0.809 Mechanical Q (Qms) 4.589 Total Q (Qts) 0.688 Resonance Frequency (Fs) 113 Hz Effective Piston Area (SD) 240.5 DC Resistance (Re) 4 Ohms BL Factor (BL) 7.176

Read more less

The Ciare 8A250MS-8 is an 8″ sealed-back midrange driver engineered to deliver clarity, reliability, and consistent performance in demanding audio systems. By combining a closed-rear acoustic design with a robust copper voice coil and ferrite motor structure, this driver thrives in compact or constrained enclosures—delivering midband precision without needing large rear volumes. With a 1.5″ copper voice coil on a polyimide former and a ferrite magnet system, the 8A250MS-8 handles up to 250 W (program) with low distortion and stable behavior through its intended midrange band. The sealed back reduces back-wave interference and gives designers more freedom in enclosure layout, making it ideal for custom cabinetry, studio monitors, or high-fidelity two- or three-way systems. If you’re building midrange stages where space, acoustic isolation, or mechanical robustness matter, the 8A250MS-8 is a compelling option. You’ll get the musical detail and consistency that Ciare’s “Americano” series is known for, while benefiting from the enclosed design that simplifies integration in tighter build spaces. Specifications Driver Type: Sealed-back midrange Nominal Diameter / Frame: 8″ (203 mm) Impedance: 8 Ω Power Handling (Continuous): 125 W Power Handling (Program): 250 W Resonance (Fs): 425.13 Hz Usable Frequency Range: 350 Hz – 4.8 kHz Voice Coil: 1.5″ (38 mm) copper, polyimide former Magnet / Motor: Ferrite (Americano line standard) Design Feature: Sealed back (closed housing)

Read more less

The all-new 2025 Sundown SA speaker series has been designed to make a statement. What statement, you may ask? That Sundown Audio can be just as serious about SQ as we are about SPL. Many people already know this but our subwoofers – even the ones used for crushing demos – have some of the lowest distortion on the market. We are now bringing our unique approach to the more dedicated Sound Quality market.Starting at the upper end of the frequency spectrum we have the SA-1T Tweeter. The SA-1T features a 25.5mm silk dome (total 38mm including surround) driven by a powerful neodymium motor structure. The dome features a compact, tuned back chamber which helps it to achieve its extremely low FS around 700hz. This gives you an enormous amount of flexibility in choosing the crossover. The tweeter can be used as a 2-way with the 6.5M or the 8M models or as part of a three way with either and the 3M model. In addition to the low FS and smooth response the SA-1T has a very high 92dB sensitivity so it doesn't take much power to get loud enough for just about anyone. The SA-1T is the 4th generation SA tweeter building on the success of the tweeter found in the SA Component sets over three generations.Headed down the spectrum to the midrange we have the SA-3M. This "little" unit is something incredibly special and is a favorite project of lead product designer / founder Jacob Fuller. We really went all-out on this unit to address the "big 3" drivers of distortion. The SA-3M features 4.5mm of one-way linear excursion by 70% BL (with 8mm x-mech thanks to the custom tooled frame – so no bottoming out even on powerful dynamics) and over 6mm by CMS and LE definitions on Klippel. There is essentially NO risk of the driver reaching linearity limits in most applications. The beefy motor structure is a combination of ferrite and a neodymium pole cap magnet to help us reach 84.5dB sensitivity at 1-watt. There is a double LE treatment internal to the motor via both a copper pole sleeve and an aluminum magnet ID shorting ring allowing the SA-3M to play full-range to beyond 20khz (although, for several reasons, we do suggest using a tweeter for the top-end). On the bottom end they can be high-pass crossed over at 300hz effortlessly with 150-watts of power handling (thanks to the 28mm diameter, extra-long voice coil) or even lower if needed, with less power, due to the incredibly high linear stroke. The suspension system, surround and spider, of the SA-3M took over a year of FEA simulations and testing to reach perfection and is just as important as the motor to the resulting low distortion. We gave the suspension just as much attention as we would for a full blown high-stroke subwoofer. To finish off this masterpiece we tested several different types of woven carbon fiber cones & dust caps to achieve the best FR possible.To finish off the 2025 SA speaker line we created the SA-6.5M and the SA-8M. Both of which can be used as a mid-bass or mid-range speaker depending on your application. Both drivers feature the same attention to detail as the 3M regarding the carbon cone and dust cap, surround, and spider. All of these parts were fully FEA simulated and Klippel verified.The SA-6.5M features 5.9mm one-way linear excursion by 70% BL, 7mm by CMS, and 6.28mm by LE on Klippel. Thanks to the efficient motor venting and ample voice coil the power handling is rated for 110-watts full range / 200-watts with a 70hz HPF filter with a respectable 89dB sensitivity. As with the SA-1T this is a 4th generation SA speaker due to the SA component set from prior generations. For this iteration we optimized it further and also created a new custom-tooled frame. The revised frame is more aerodynamics and also allows for superior coil ventilation. As with most Sundown products you will find a thick magnet-ID Faraday ring as well. Last, but absolutely not least, we have the SA-8M which takes linear stroke to yet another level. We were able to achieve 9mm one-way linear by 70% BL and nearly 10mm by CMS and LE standards. As with the 3M, the 8M features a pole sleeve and magnet ID faraday ring for LE treatment. This unit is an absolute powerhouse for mid-bass, and we believe it will make big waves in the SQ world. On the output side it has a 91.5dB sensitivity and will handle 130-watts full-range / 250-watts with a 70Hz HPF thanks to the efficient motor venting and huge 2" coil. The SA-8M is all-in on SQ and output potential – the Sundown way! Impedance 4 ohm RMS Watts 130 Max Watts 250 Max Frequency 20Khz Min Frequency 70hz Xmax 9mm QES 0.334 VAS 21.892 QMS 6.696 QTS 0.318 RE 3.2   Outer Diameter 8.26 Cutout Diameter 7.28 Mounting Depth 3.4 Magnet Material Ferrite Surround Material Rubber Basket Material Aluminum

Read more less

  Features Sold Individually Power Handling: 60 Watts RMS Impedance: 4 ohms Frequency Range: 60Hz - 20kHz Sensitivity: 94dB

Read more less

DS18 amassed a wealth of experience in manufacturing the most elegant neodymium midranges for those seeking simple perfection. Neodymium magnets provide a higher magnetic flux density in the air gap, which generates a much greater action force in the voice coil. For this reason, Neo magnets have the strongest permanent magnets of all the commercially available speakers. Ranging in sizes, mounting depths, and frequency responses, we have more than 10 different models of Neo mids to accommodate any build. Model: PRO-NEO8SLIM Type: Shallow Midrange Loudspeaker with Bullet Size: 8" RMS Power: 250W MAX Power: 500W Frequency Response: 123Hz - 13.7KHz Impedance: 4 Ohm Sensitivity:  95dB Materials   Surround: Cloth Edge Frame: Black Aluminum Basket Cone: Non-Pressed Paper Cone Magnet: Neodymium Voice Coil Wire: KCCAW 2 Layer Diameters   Voice Coil Size: 2" Magnet Size: NEO 4 oz  Mounting Depth: 2.22" (56.6mm)  Cut-Out Dimensions: 7.20" (183mm) Net Weight: 1.7kg

Read more less

DAILY DEAL! Today only! The Sparked Innovations Voice Blaster is a neo-driven midrange speaker designed to deliver crisp, low-distortion sound at high output levels. We developed our midrange speakers for most audio setups where space and power are at a premium. The neodymium motor structure, coupled with a lightweight voice coil former and paper cone, helps create a high-efficiency speaker that can deliver loud music on low power, even in tight spaces. The aluminum phase plug reduces unwanted distortion in the center of the speaker cone. This results in a wider dispersion pattern, suitable for loud and clear listening, even with off-axis positioning, such as when the speaker is mounted in door panels or kick-pods. 8" Speaker Feature Specification Frequency Response 75hz - 6,000hz Sensitivity 99dB RMS Power Handling 100W Voice Coil Diameter 1.5” Xmax 10mm Motor Material Neodymium Basket Material Cast Aluminum Voice Coil Former Kapton Voice Coil CCAW

Read more less

Discover the Ciare CME-200, a premium 8-inch midbass driver engineered for clarity, punch, and professional-grade performance. With its high sensitivity of 99.5 dB and substantial power handling (260W program), the CME-200 bridges the gap between deep bass and articulate midrange — making it an excellent choice for 2-way, 3-way, or high-fidelity PA systems. This driver delivers a smooth, dynamic sound response from 70 Hz up to 8 kHz, granting both authoritative lows and transparent mids. The cellulose fiber cone ensures a natural, non-fatiguing tone, while the carefully engineered surround and suspension maintain control and minimize distortion even at higher excursions. Built for longevity and precision, the CME-200 features a 1.5″ (38 mm) aluminum voice coil on a Kapton former, a robust ferrite motor system, and a rigid steel basket. With full set of Thiele–Small parameters available, this driver offers predictability and ease in system modeling and enclosure design. Whether you're building pro audio cabinets, studio monitors, or custom high-end speakers, the CME-200 offers an outstanding combination of efficiency, reliability, and musical authority. Specifications Driver Type / Category: 8″ (200 mm) Midbass / Low-Frequency Driver Impedance: 4 Ω Power Handling: 130 W (nominal) / 260 W (program) Sensitivity: 99.5 dB (2.83V / 1 m) Voice Coil Diameter: 38 mm (1.5 in) Voice Coil Material / Former: Aluminum winding on Kapton former Winding Depth: 11 mm Magnetic Gap Depth: 8 mm Frequency Range: 70 Hz – 8000 Hz Resonance (Fs): 76 Hz Qes: 0.39 Qms: 7.00 Qts: 0.37 Sd (Effective Area): 206 cm² Xmax (One-way): 3.5 mm Bl (Force Factor): 7.3 T·m Re (DC Resistance): ~3.0 Ω Le (Inductance): 0.45 mH Vas: 18 L Mms: 14.2 g Vd (Volume Displaced at Xmax): ~72 cm³ EBP: ~195 Hz Recommended Enclosure: ~11 L vented / tuned ~71 Hz Overall Diameter: 206 mm Baffle / Cutout Diameter: 185 mm Flange / Gasket Thickness: 7.5 mm Mounting Depth: 91.5 mm Bolt Circle / Holes: 194 mm / 8 × 5.5 mm bolts Net Weight: 2.5 kg Frame Material: Steel basket Cone Material / Shape: Cellulose fiber, exponential cone Surround / Suspension: Cotton fabric materials Connection Type: Fast-On terminals

Read more less

Unleash broad, articulate sound with the Ciare CMR200, an 8-inch extended-range driver built to deliver smooth vocals, instruments, and upper bass frequencies with clarity. Designed to function as a versatile all-in-one mid / midbass / extended midrange unit, it finds its place in multiway speaker systems, high-fidelity installations, or premium car audio builds where a seamless midband performance is key. Thanks to its 96 dB sensitivity and robust ferrite motor structure, the CMR-200 pushes detail and dynamic content without struggle under demanding playback. The copper 1.5″ (38 mm) voice coil, aluminum former, and well-engineered suspension work together to maintain linear excursion and minimize distortion even near its power limits. Engineered for both audio purists and system integrators, this driver offers an excellent balance of range, durability, and acoustic fidelity. Whether used in sealed, vented, or partial enclosures, the CMR-200 is a dependable choice for systems aiming to deliver clarity and musicality across a broad frequency span. Specifications Driver Type: 8″ extended-range / full-range / midrange Nominal Diameter: 200 mm (8″) Impedance: 4 Ω Power Handling: 120 W (nominal), 250 W (program) Sensitivity: 96 dB (1W @ 1m) Frequency Response: 80 – 6000 Hz Voice Coil Diameter: 1.5″ (38 mm) Voice Coil Length / Winding: 11 mm Voice Coil Former Material: Aluminum Cone Material: Doped cellulose fiber (exponential shape) Surround / Suspension: Doped fabric surround, Nomex spider Basket / Frame: Steel Magnet Type: Ferrite Magnet Gap Height: 7 mm Mechanical / Mounting Dimensions: • Overall Diameter: 8.27″ (≈ 210 mm) • Baffle Cutout Diameter: 7.17″ (~182 mm) • Mounting Holes: 4 • Depth: 3.62″ (~92 mm)

Read more less

Introducing the Ciare 8A250MS-4, a sealed-back 8-inch midrange driver crafted for high-fidelity systems where enclosure design constraints require a closed rear housing. Its sealed-back construction mitigates rear-wave interference, making it ideal for installations that must control internal acoustics or limit depth without compromising midrange clarity. Built with a 1.5″ copper voice coil on a polyimide former, and driven by a robust ferrite motor system, this unit handles up to 250 W (program) with authority. Whether deployed in compact loudspeaker designs, studio monitors, or refined 2-/3-way systems, the 8A250MS-4 produces detailed midband reproduction that highlights vocals and instruments with minimal coloration. For audio engineers, OEMs, or custom loudspeaker builders seeking a midrange that balances acoustic performance and installation flexibility, this sealed-back design is a strong choice. You get the sonic transparency of the Americano lineage, combined with mechanical durability and mounting resilience. Specifications Driver Type / Category: 8″ sealed-back midrange Frame / Diameter: 8″ (203 mm) Nominal Impedance: 4 Ω Power Handling (Program): 250 W Voice Coil: 1.5″ (38 mm) copper with polyimide former Magnet / Motor: Ferrite (standard in Ciare Americano line) Design Feature: Sealed-back enclosure for acoustic isolation Series / Branding: Ciare Americano line

Read more less

The Ciare 8A250M-4 is a precision 8-inch midrange driver designed for demanding audio systems where clarity, definition, and musical balance matter. Whether used in professional 2- or 3-way speakers, high-end home stereos, or custom public address systems, this unit brings exceptional midband performance with power handling and robustness that set it apart. With a 1.5" copper voice coil wound on a polyimide former, and housed in a rugged steel frame, the 8A250M-4 is engineered to deliver clean, undistorted midrange even under demanding loads. Its well-balanced response ensures vocal and instrumental clarity without glare, making it ideal for both music reproduction and speech. The “Americano” series pedigree from Ciare gives you the heritage of Italian acoustic design, while proven materials and careful construction boost its long-term reliability. Users will appreciate the combination of musical detail and durable build quality. The 8A250M-4 can reliably handle 250 W (program) in midrange duties, and its robust mechanical design means it can survive extended use in professional installations. For OEMs, audio builders, or discerning home users, this midrange driver is a compelling choice where transparency and durability are both demanded. Specifications: Driver Type / Category: 8″ (203 mm) Midrange Series: Ciare “Americano” Nominal Impedance: 4 Ω  Power Handling (Program): 250 W  Voice Coil: 1.5″ (38 mm) copper winding, polyimide former  Frame / Basket: Steel frame (rugged)  Magnet Type: Ferrite magnet (standard for Americano series)  Nominal Diameter: 203 mm (8″)  Other Features:• Designed for high linear excursion and low distortion in the midrange band 

Read more less

The new Audio Ace Diamond X8 is a high efficiency coaxial that is conservatively rated at 150 RMS. 4 Ohm SOLD IN PAIRS

Read more less

Our Diamond 8" is a midrange pro audio speaker designed to have all the benefits of a PA style speaker for use in a car audio environment. Features a custom tooled basket with Audio Ace Logo. The Diamond Series of Loudspeakers can handle more power and play louder than most other midrange speakers in its class. SOLD PER PAIR 8" Mid Range Driver 35MM Single 4ohm Voice Coil Sensitivity: 94DB 20 Oz Magnet 150W rms

Read more less

Never used, or installed! Sold Individually! MLM-804ND 8" Neo Mid 4 Ohm SKU: MLM-804ND For car audio enthusiasts seeking an upgrade over traditional, McLaren Sound Systems has designed 3 series of midbass & midrange drivers. Depending on size, depth, frequencies you have a wide range of options to suit your listening preferences.   The NEO Series are our flagship design. Light weight and shallow that offers a concert sound in a flat design that can virtually fit anywhere.   Specs:   8" (203.2mm). 200 wts rms, 400 wts peak. 2" Copper voice coil. 8 Ohms . N42H Neodymium magnet. Stamped steel frame. Freq range: 100 Hz - 5KHz   Parameters:   Impedance (ohms) 8 SPL (dB) 94.1 FS (Hz) 134.95 Vas (L) 5.62 Qes 0.819 Qms 2.92 Qts 0.639 BL (NA) 11.508 Mms (Grams) 17.283 Cms (mm/N) 0.805   Mounting Depth  " Total Depth  2  5/16" Cut-Out diameter  "

Read more less