TAX TIME

•    500 Watts RMS / 1000 Watts Peak•    Dual 4-ohm voice coils•    Optimized for small, ported enclosures•    Class-leading 14mm Xmax•    Double-stacked magnet•    Vented coil gap & pole for superior cooling•    Extra thick stamped steel frame•    High temp 4-layer copper voice coil•    High-quality push terminals•    Stitched-on flat tinsel leads•    Extremely low resonant frequency (Fs) Find the ideal balance of power, deep bass, and affordability with Sundown LCS subs. Sundown LCS woofers are known for their impressive bass response and high dependability. Typical entry-level woofers are limited in terms of excursion, mechanical ruggedness, and thermal performance. The v.2 update added an all-new, custom-tooled frame, push terminals, a rubber mounting gasket, and upgraded tinsel leads. 

Read more less

  Power Handling: 100 Watts RMS Impedance: 4 or 8 Ohms Frequency range: 4kHz - 20kHz Sensitivity 100dB Sold Individually Handling 100 watts and sporting a slender mounting ring, the GT-R1 is the choice when you want the tweeter to take up a smaller footprint on your door, but want to hear those highs no matter how loud the bass is.  With an incredible 100dB sensitivity and a wide frequency range, this super tweeter makes the most out of every watt you give it.

Read more less

  125 W RMS Silk dome tweeter Hybrid fiber cone Integrated crossover Cast aluminum frame Premium spring-loaded speaker terminals SPL: 91 Db Frequency range:  45Hz - 20KHz Sundown’s premiere sound quality separates, the SA-6.5CS is a marvel of design and top-tier components.  The midrange features a high-quality cast aluminum basket, housing a cone with a carefully selected blend of paper and wool fibers. This design dampens any unwanted resonances for an incredibly smooth, detailed response. The surround is a high-compliance rubber, engineered to tame edge resonances within the cone. An FEA-optimized motor was designed in-house and features a full 6mm one-way linear excursion - thanks to a carefully designed motor and extended pole piece. To increase thermal performance, the SA midrange features a vented magnetic gap and vented voice coil collar. The SA series silk dome tweeter matches the smooth sound of the midrange. After extensive testing, Sundown optimized the tweeter’s gap, dome material, lens, and chamber damping material. The results speak for themselves. The SA separates were engineered for one, simple goal: to let you completely immerse yourself in the music. At any volume. For as long as you want.

Read more less

Features Sold Individually Power Handling: 100 Watts RMS Impedance: 4/8 Ohm Frequency Range: 120Hz - 6kHz Phase Plug Outside Diameter: 8.25" Cutout Diameter: 7.125" Mounting Depth: 3.50" Effective surface area,Sd: 12.469Mm*

Read more less

  When Sundown set out to design the "SA" series component they knew it had to be something special; something to uphold the reputation of the SA series subwoofer line. But at the same time the price had to remain reasonable; something that almost anyone can afford. The SA component set starts out with its custom designed midrange driver. The mid features a high quality cast aluminum basket as its starting point; where many speakers in this category go with cheaper stamped steel frames.  The cone is a carefully selected blend of paper and wool fibers designed to damp any unwanted resonances. The dust cap is a soft poly whose size, shape, and material were all chosen to create the least amount of breakup and distortion as possible. The surround is a very compliant rubber that helps to tame any remaining edge resonances within the cone. With any midrange the cone, surround, and dust cap are CRITICAL to the sound. When designing the SA set we had no concern for fancy cosmetics or other "audio jewelry"  The motor was FEA optimized in-house to increase linear excursion and features a full 6mm one-way linear excursion thanks to a carefully designed motor and extended pole piece. We also thoroughly considered thermal performance in the design with the SA mid featuring a vented magnetic gap and a vented voice coil collar. The 60-watt per side power rating on the SA mid is derived from a full 8-hour test on pink noise (full bandwidth down to 20 Hz) -- so when crossed over on the bottom-end this figure ends up being VERY conservative. Most customers use 100+ watt RMS amplifiers on the SA sets.  The SA series tweeter had to match the smooth sound of the midrange so we went with a silk dome. We tested numerous versions, tweaked the gap, dome material, tested various lenses, various chamber damping materials, so on and so forth until arriving at the final design. As the response graph is proof of the result is an incredibly smooth sounding tweeter. Don't be fooled by the simple housing -- as we are all taught not to judge a book by its cover and you will find this tweeter performs as good or better than many fancier looking counterparts. We stuck with the Sundown mentality of not spending money where it doesn't increase performance.  The crossover is also relatively simple looking at first glance but it does the job perfectly. It is a 12 dB network centered at 3800 Hz with high quality air core inductors and Mylar capacitors. It also features the ability to change the LPF on the mid from a 12dB, to 6dB, to a bypassed slope as well as to adjust the tweeter from 0, to -3, to -6 dB levels.  We are confident that anyone who is after a smooth sounding set will be incredibly pleased with the SA component line. Reviews have been overwhelmingly positive on them from all over the globe. If you are a metal or hard dome tweeter fan it may not be your set but we will develop a "sharper" sounding set down the line!  Features & Specifications 6.5" Component Speakers System 125 Watts / Side Silk Dome Tweeter Machine Aluminum Tweeter Housing Case Aluminum Frame Magnet ID Shorting Ring (Midrange) Carbon Fiber Cone Rubber Surround 24dB/Octave Crossover Adjustable Tweeter Level (-3, 0, +3) Mounting Depth: 2.87" Cutout: 5.63"

Read more less

  100W RMS Black polypropylene cone UV-resistant rubber surround High-performance titanium dome tweeter Rubber tweeter stalk ring for weather and dust resistance Black stamped steel basket with perimeter venting Sold as pairs Grilles included  3.5" mounting depth Sundown’s constant innovation continues in the affordable E-Series coaxial speakers. Designed for audiophiles and enthusiasts alike, these speakers give you crisp highs, rich mids, and deep, hard-hitting bass! Using a titanium tweeter and tough polypropylene cone, the E-Series drivers use a damped titanium tweeter for smooth response, without the harshness of most metal drivers. An ultra smooth sounding polypropylene cone is mated to the cone with a rubber surround, helping to provide extremely linear excursion. A rubber sealing ring was added to the tweeter stalk, preventing dust and moisture from interfering with motor movement.  The steel frame is custom tooled and vented for outstanding thermal control, so you can play it long and play it loud!

Read more less

100W RMS Black polypropylene cone UV-resistant rubber surround High-performance titanium dome tweeter Rubber tweeter stalk ring for weather and dust resistance Black stamped steel basket with perimeter venting Sold as pairs Grilles included Sundown continues its tradition of innovation with the affordable E-Series component speakers. Designed for both audiophiles and enthusiasts, these speakers provide crisp highs, rich mids, and deep, impactful bass, delivering the quality expected of SPL champions. The E-Series drivers feature a damped titanium tweeter and a polypropylene cone to ensure smooth response. The speakers also use a rubber surround to provide extremely linear excursion. Additionally, the custom-tooled, vented steel frame ensures outstanding thermal control for extended, high-volume use.

Read more less

  1250 Watts RMS / 2500 Watts Peak Dual 2 or 4 ohm voice coils Vented magnetic gap & pole piece Aluminum 2.75” voice coil former for superior heat dissipation Innovative high velocity, cast aluminum vented frame spacer ring Magnet ID faraday ring for smooth acoustic response High-temperature copper voice coil wire Spring-loaded terminals Stitched-on double “XL” tinsel leads This SA-10/12/15 v.2 series is a top-down upgrade from the original SA series. The 2.75” coil punches way above its weight, outperforming many 3” coils without the adding weight & with the added advantage of a wider spider. We are able to perfectly balance the mass, motor force, and suspension stiffness for the intended power level. The motor also features a large magnet shorting ring (faraday ring) to reduce distortion and deliver smoother response across the entire acoustic spectrum. The motor & coil setup is mated to an extremely robust multi-layer spider with fully tied-on & doubled-up “XL” tinsel leads. A competition-grade paper cone, strong foam surround, and cast aluminum frame are used to complete this masterpiece. On top of the ~19mm of one-way linear excursion we have an x-mech limit of 37mm one-way before coil bottom making it nearly "bottomless." The 18" model features a larger diameter motor to drive the higher mass. Enclosure Designs .Zip File

Read more less

  OEM replacement for Dodge/Chrysler dashboards. 4mm Linear Excursion (two-way) Inverted Rubber Surround Aluminum Dust Cap Frequency Response: 200 Hz - 20,000 Hz 30 Watts RMS  Drop-in upgrade for Dodge/Chrysler Extended frequency response Custom-voiced cone with aluminum dust cap Never settle for stock sound! Upgrade your Dodge or Chrysler dashboard with the SA-2.75 component speaker, designed as the perfect OEM replacement for a seamless factory fit and a massive upgrade in sound quality. With an impressive 4mm linear excursion, inverted rubber surround, and aluminum dust cap, this speaker is built for durability and high performance. With an extended frequency response of 200 Hz all the way to 20kHz ensures that every note is extraordinarily crisp, full sound – with an incredibly simple installation using factory mounting points. Hear the difference quality makes.  

Read more less

  Features Sold Individually Power Handling: 60 Watts RMS Impedance: 4 ohms Frequency Range: 60Hz - 20kHz Sensitivity: 94dB

Read more less

1250 Watts RMS / 2500 Watts Peak Dual 2 or 4 ohm voice coils Vented magnetic gap & pole piece Aluminum 2.75” voice coil former for superior heat dissipation Innovative high velocity, cast aluminum vented frame spacer ring Magnet ID faraday ring for smooth acoustic response High-temperature copper voice coil wire Spring-loaded terminals Stitched-on double “XL” tinsel leads This SA-10/12/15 v.2 series is a top-down upgrade from the original SA series. The 2.75” coil punches way above its weight, outperforming many 3” coils without the adding weight & with the added advantage of a wider spider. We are able to perfectly balance the mass, motor force, and suspension stiffness for the intended power level. The motor also features a large magnet shorting ring (faraday ring) to reduce distortion and deliver smoother response across the entire acoustic spectrum. The motor & coil setup is mated to an extremely robust multi-layer spider with fully tied-on & doubled-up “XL” tinsel leads. A competition-grade paper cone, strong foam surround, and cast aluminum frame are used to complete this masterpiece. On top of the ~19mm of one-way linear excursion we have an x-mech limit of 37mm one-way before coil bottom making it nearly "bottomless." The 18" model features a larger diameter motor to drive the higher mass. Enclosure Designs .Zip File

Read more less

1250 Watts RMS / 2500 Watts Peak Dual 2 or 4 ohm voice coils Vented magnetic gap & pole piece Aluminum 2.75” voice coil former for superior heat dissipation Innovative high velocity, cast aluminum vented frame spacer ring Magnet ID faraday ring for smooth acoustic response High-temperature copper voice coil wire Spring-loaded terminals Stitched-on double “XL” tinsel leads This SA-10/12/15 v.2 series is a top-down upgrade from the original SA series. The 2.75” coil punches way above its weight, outperforming many 3” coils without the adding weight & with the added advantage of a wider spider. We are able to perfectly balance the mass, motor force, and suspension stiffness for the intended power level. The motor also features a large magnet shorting ring (faraday ring) to reduce distortion and deliver smoother response across the entire acoustic spectrum. The motor & coil setup is mated to an extremely robust multi-layer spider with fully tied-on & doubled-up “XL” tinsel leads. A competition-grade paper cone, strong foam surround, and cast aluminum frame are used to complete this masterpiece. On top of the ~19mm of one-way linear excursion we have an x-mech limit of 37mm one-way before coil bottom making it nearly "bottomless." The 18" model features a larger diameter motor to drive the higher mass. Enclosure Designs .Zip File

Read more less