Bass Blaster

The Bass Blaster subwoofer series is a truly unique blend of car audio nostalgia and modern technology. Designed and built as a product of love for car audio, this subwoofer will look as good in your installation as it will sound. As lifelong enthusiasts ourselves, we knew the demands this subwoofer would need to meet. The engineering expertise of Jacob Fuller, founder of Sundown Audio, has led to a subwoofer that can take the abuse of high-powered systems that the modern-day enthusiast likes to throw at everything. Advanced cooling techniques, high-excursion linear suspension, and classically inspired aesthetics mean The Bass Blaster will give you the best-sounding bass, for a long time, as you turn the heads of anyone that takes a look. Design Our philosophy with The Bass Blaster was to recreate the feel of car audio from our youth. The blue surround is not just our branding color, it is an homage to woofers of the 1990s that used brightly colored surrounds as a signature look. The balance of the blue to the grey/silver basket and cone harkens back to the early 2000s when some of our favorite woofer models sported a distinct style. The aluminum dust cap gives depth and texture to the woofer as a whole and adds rigid reinforcement to the cone body. The genesis of the design was the motor itself, the large vent for the four-inch coil caught our eye in car audio shops in the 1990s. Jacob Fuller captured that look while tapering the vent and adding a pole cap so as to not compromise modern cooling techniques for the best performance-to-aesthetics ratio possible. Topped off with the metal mesh over the magnet slugs, The Bass Blaster is the 90s/2000s woofer we all wish we had in our teens, but even better that we have it in our 40s. General Specifications Power handling 2000W RMS Dual voice coil D2 or D4 Xmax (mm one way) 25 Xmech (mm one way)  50 Heat-treated 4-layer 4-inch coil Quad braided tinsel leads Multi-layer foam surround in Sparked Blue Aluminum dust cap Cast aluminum frame High-velocity motor cooling Measurements Parameter Metric (mm) Imperial (in) Outer Diameter 313.7 12.35 Mounting Diameter 283.0 11.14 Overall Depth 250.2 9.85 Mounting Depth 220.2 8.67 T/S Parameters Parameter D2 D4 RE (Ohms) 3.97 5.99 Fs (Hz) 29.44 30.82 VAS (L) 13.35 12.28 Qes 0.53 0.61 Qms 5.82 6.46 Qts 0.48 0.55 BL 30.12 35.19 Mms (Grams) 650.19 645.01 Cms (uM/N) 44.95 41.34 Sensitivity (dB @2.83Vrms/1m) 82.90 @ 1 kHz 80.74 @ 1 kHz ENCLOSURE RECOMMENDATIONS Size Enclosure Type Volume (ft³) Port Tuning (Hz) Details Type Dia. (in) Length (in) 12" QB3 - Flat Response 0.90-1.15 Round 3 36" @ 0.95ft³29" @ 1.15ft³ 23 Details 12" QB3 - Low-Frequency Peak 1.25-2.00 Round 3 20" @ 1.25ft³11" @ 2.00ft³ 26 Details 12" SBB4 - Flat Response 0.50-0.75 Round 3 35" @ 0.50ft³22" @ 0.75ft³ 32 Details 12" SBB4 - Loud Bass Response 1.25-2.00 Round 4 23" @ 1.25ft³14" @ 2.00ft³ 32 Details ×  

Read more less

The Bass Blaster subwoofer series is a truly unique blend of car audio nostalgia and modern technology. Designed and built as a product of love for car audio, this subwoofer will look as good in your installation as it will sound. As lifelong enthusiasts ourselves, we knew the demands this subwoofer would need to meet. The engineering expertise of Jacob Fuller, founder of Sundown Audio, has led to a subwoofer that can take the abuse of high-powered systems that the modern-day enthusiast likes to throw at everything. Advanced cooling techniques, high-excursion linear suspension, and classically inspired aesthetics mean The Bass Blaster will give you the best-sounding bass, for a long time, as you turn the heads of anyone that takes a look. Design Our philosophy with The Bass Blaster was to recreate the feel of car audio from our youth. The blue surround is not just our branding color, it is an homage to woofers of the 1990s that used brightly colored surrounds as a signature look. The balance of the blue to the grey/silver basket and cone harkens back to the early 2000s when some of our favorite woofer models sported a distinct style. The aluminum dust cap gives depth and texture to the woofer as a whole and adds rigid reinforcement to the cone body. The genesis of the design was the motor itself, the large vent for the four-inch coil caught our eye in car audio shops in the 1990s. Jacob Fuller captured that look while tapering the vent and adding a pole cap to not compromise modern cooling techniques for the best performance-to-aesthetics ratio possible. Topped off with the metal mesh over the magnet slugs, The Bass Blaster is the 90s/2000s woofer we all wish we had in our teens, but even better that we have it in our 40s. General Specifications Power handling 2000W RMS Dual voice coil D2 or D4 Xmax (mm one way) 25 Xmech (mm one way)  50 Heat-treated 4-layer 4-inch coil Quad braided tinsel leads Multi-layer foam surround in Sparked Blue Aluminum dust cap Cast aluminum frame High-velocity motor cooling Measurements Parameter Metric (mm) Imperial (in) Outer Diameter 272 10.71 Mounting Diameter 240 9.45 Overall Depth 221 8.70 Mounting Depth 191 7.52 T/S Parameters Parameter 10" D2 10" D4 RE (Ohms) 3.97 6.9 Fs (Hz) 34.25 35.60 VAS (L) 6.23 6.41 Qes 0.46 0.55 Qms 4.97 4.97 Qts 0.43 0.50 BL 30.86 36.01 Mms (Grams) 517.84 465.72 Cms (uM/N) 41.69 42.92 Sensitivity (dB @2.83Vrms/1m) 82.10 @ 1 kHz 79.57 @ 1 kHz ENCLOSURE RECOMMENDATIONS Size Enclosure Type Volume (ft³) Port Tuning (Hz) Details Type Dia. (in) Length (in) 10" QB3 - Flat Response 0.40-0.75 Round 2 32" @ 0.40ft³16" @ 0.75ft³ 25 Details 10" QB3 - Low-Frequency Peak 0.80-1.50 Round 2 12" @ 0.80ft³6" @ 1.50ft³ 28 Details 10" SBB4 - Flat Response 0.35-0.60 Round 2 22" @ 0.35ft³13" @ 0.60ft³ 32 Details 10" SBB4 - Loud Bass Response 1.00-1.75 Round 4 30" @ 1.00ft³16" @ 1.75ft³ 32 Details ×  

Read more less

The Bass Blaster subwoofer series is a truly unique blend of car audio nostalgia and modern technology. Designed and built as a product of love for car audio, this subwoofer will look as good in your install as it will sound. As lifelong enthusiasts ourselves, we knew the demands this subwoofer would need to meet. The engineering expertise of Jacob Fuller, founder of Sundown Audio, has led to a subwoofer that can take the abuse of high-powered systems that the modern-day enthusiast likes to throw at everything. Advanced cooling techniques, high-excursion linear suspension, and classically inspired aesthetics mean The Bass Blaster will give you the best-sounding bass, for a long time, as you turn the heads of anyone that takes a look. Design Our philosophy with The Bass Blaster was to recreate the feel of car audio from our youth. The blue surround is not just our branding color, it is an homage to woofers of the 1990s that used brightly colored surrounds as a signature look. The balance of the blue to the grey/silver basket and cone harkens back to the early 2000s when some of our favorite woofer models sported a distinct style. The aluminum dust cap is used to give depth and texture to the woofer as a whole and add rigid reinforcement to the cone body. The genesis of the design was the motor itself, the large vent for the four-inch coil was something that caught our eye in car audio shops in the 1990s. Jacob Fuller captured that look while tapering the vent and adding a pole cap to not compromise modern cooling techniques for the best performance-to-aesthetics ratio possible. Topped off with the metal mesh over the magnet slugs, The Bass Blaster is the 90s/2000s woofer we all wish we had in our teens, but even better that we have it in our 40s. General Specifications Power handling 2000W RMS Dual voice coil D2 or D4 Xmax (mm one way) 25 Xmech (mm one way)  50 Heat-treated 4-layer 4-inch coil Quad braided tinsel leads Multi-layer foam surround in Sparked Blue Aluminum dust cap Cast aluminum frame High-velocity motor cooling Measurements Parameter Metric (mm) Imperial (in) Outer Diameter 389.90 15.35 Mounting Diameter 355.60 14.00 Overall Depth 273.84 10.78 Mounting Depth 243.84 9.60 T/S Parameters Parameter D2 D4 RE (Ohms) 3.88 5.97 Fs (Hz) 28.52 29.72 VAS (L) 33.36 32.02 Qes 0.61 0.69 Qms 6.50 6.97 Qts 0.56 0.63 BL 30.74 35.98 Mms (Grams) 830.92 797.52 Cms (uM/N) 37.50 35.95 Sensitivity (dB @2.83Vrms/1m) 85.91 @ 1 kHz 83.90 @ 1 kHz ENCLOSURE RECOMMENDATIONS Size Enclosure Type Volume (ft³) Port Tuning (Hz) Details Type Dia. (in) Length (in) 15" QB3 - Flat Response 2.75-3.50 Round 4 23" @ 2.75ft³17" @ 3.50ft³ 22 Details 15" QB3 - Low-Frequency Peak 3.25-5.00 Round 4 14" @ 3.25ft³8" @ 5.00ft³ 25 Details 15" SBB4 - Flat Response 1.50-2.00 Round 4 19" @ 1.50ft³14" @ 2.00ft³ 32 Details 15" SBB4 - Loud Bass Response 2.50-6.50 Round 6 25" @ 2.50ft³7" @ 6.50ft³ 32 Details ×

Read more less

The Bass Blaster subwoofer series is a truly unique blend of car audio nostalgia and modern technology. Designed and built as a product of love for car audio, this subwoofer will look as good in your installation as it will sound. As lifelong enthusiasts ourselves, we knew the demands this subwoofer would need to meet. The engineering expertise of Jacob Fuller, founder of Sundown Audio, has led to a subwoofer that can take the abuse of high-powered systems that the modern-day enthusiast likes to throw at everything. Advanced cooling techniques, high-excursion linear suspension, and classically inspired aesthetics mean The Bass Blaster will give you the best-sounding bass, for a long time, as you turn the heads of anyone that takes a look. Design Our philosophy with The Bass Blaster was to recreate the feel of car audio from our youth. The blue surround is not just our branding color, it is an homage to woofers of the 1990s that used brightly colored surrounds as a signature look. The balance of the blue to the grey/silver basket and cone harkens back to the early 2000s when some of our favorite woofer models sported a distinct style. The aluminum dust cap gives depth and texture to the woofer as a whole and adds rigid reinforcement to the cone body. The genesis of the design was the motor itself, the large vent for the four-inch coil caught our eye in car audio shops in the 1990s. Jacob Fuller captured that look while tapering the vent and adding a pole cap so as to not compromise modern cooling techniques for the best performance-to-aesthetics ratio possible. Topped off with the metal mesh over the magnet slugs, The Bass Blaster is the 90s/2000s woofer we all wish we had in our teens, but even better that we have it in our 40s. General Specifications Power handling 2000W RMS Dual voice coil D2 or D4 Xmax (mm one way)  25 Xmech (mm one way)  50 Heat-treated 4-layer 4-inch coil Quad braided tinsel leads Multi-layer foam surround in Sparked Blue Aluminum dust cap Cast aluminum frame High-velocity motor cooling Measurements Parameter Metric (mm) Imperial (in) Outer Diameter 464.06 18.27 Mounting Diameter 426.47 16.79 Overall Depth 301.36 11.86 Mounting Depth 271.36 10.68 T/S Parameters Parameter D2 D4 RE (Ohms) 3.91 5.94 Fs (Hz) 26.72 27.44 VAS (L) 70.36 74.16 Qes 0.63 0.69 Qms 6.86 6.67 Qts 0.58 0.63 BL 32.08 36.54 Mms (Grams) 994.75 894.78 Cms (uM/N) 35.66 37.60 Sensitivity (dB @2.83Vrms/1m) 88.11 @ 1 kHz 86.52 @ 1 kHz ENCLOSURE RECOMMENDATIONS Size Enclosure Type Volume (ft³) Port Tuning (Hz) Details Type Dia. (in) Length (in) 18" QB3 - Flat Response 6.50-8.50 Round 6 25" @ 6.50ft³18" @ 8.50ft³ 20 Details 18" QB3 - Low-Frequency Peak 7.00-9.50 Round 6 16" @ 7.00ft³11" @ 9.50ft³ 23 Details 18" SBB4 - Flat Response 3.25-4.25 Round 6 18" @ 3.25ft³13" @ 4.25ft³ 32 Details 18" SBB4 - Loud Bass Response 6.50-10.00 Round Two x 6 18" @ 6.50ft³11" @ 10.00ft³ 32 Details ×

Read more less