All Products
-
Stetsom BRAVO BASS Flex 8K Mono Class D Car Audio Amplifier
The Stetsom BRAVO BASS Flex 8K is a mono, Class D car audio amplifier featuring an Automatic Impedance System (FLEX) that adjusts its output impedance from 0.5 Ohm to 1 Ohm. It is designed for high-performance BASS and SUB BASS applications. The Bravo Bass Line amplifier is a powerful and high-quality car audio amplifier that delivers an impressive 8000 watts RMS output, designed exclusively for BASS and SUB BASS performance. It features the advanced FLEX – Automatic Impedance System, which intelligently adjusts the amplifier’s impedance from 0.5 to 1 Ohm according to the needs of the connected speakers, ensuring optimal performance and system stability in every setup. To maintain efficient and silent operation, the amplifier is equipped with Smart and Silent Coolers that provide excellent heat dissipation while minimizing noise, allowing the system to perform reliably even under heavy loads. The In/Out Audio RCA connections make it possible to link the amplifier with another unit, offering flexible system expansion for more powerful configurations. Additionally, it supports up to 7 AWG speaker connectors and up to 00 AWG double power and double ground connectors, ensuring strong and stable current flow for consistent output performance. Compact, elegant, and built for automotive sound enthusiasts, the Bravo Bass Line amplifier combines a stylish design with maximum performance in bass and sub-bass reproduction. It fits easily into any car audio setup, delivering deep, clean, and controlled low frequencies that elevate the entire listening experience. Technical Specifications Specification Detail Minimum Output Impedance 0.5 OHM ~ 1 OHM (AUTO) Number of Channels 1 RMS Power @ 14.4V (Output Varies by Auto-Impedance) 8,800W RMS @ 0.5 Ohm 9,000W RMS @ 0.67 Ohm 8,700W RMS @ 0.80 Ohm 9,000W RMS @ 1 Ohm Supply Voltage 9V ~ 17V DC Frequency Response (-3dB) 5Hz ~ 200Hz Crossover Low Pass (LPF) 30Hz ~ 200Hz (Variable) Crossover Subsonic Filter 5Hz ~ 40Hz (Variable) Bass Boost 0dB ~ +10dB (30Hz ~ 70Hz selectable frequency) Signal to Noise Ratio >90 dB Input Sensitivity 0.2V ~ 6V Input Impedance 55K Ohms Musical Consumption 390A BASS Consumption 780A Dimensions (H x W x L) 3.1" x 9.1" x 19.4" Weight 15.6 lb (7.10 Kg) Quantity of Speakers Speaker Impedance Resultant Impedance 2 x speakers 1 OHM 0.5 OHM 4 x speakers 2 OHMS 0.5 OHM 3 x speakers 2 OHMS 0.66 OHM 2 x speakers 2 OHMS 1 OHM 4 x speakers 4 OHMS 1 OHM
$781.99
-
STETSOM BRAVO BASS 8K Mono 1-Channel Class D - 8000 Watts DIGITAL SUBWOOFER AMPLIFIER
Unrivaled Power for Competition Bass The Stetsom BRAVO BASS 8K is the definitive choice for the extreme automotive sound enthusiast, developed for unrivaled performance in BASS and SUB BASS applications. This Class D Mono Amplifier outputs an earth-shattering 8200 Watts RMS at 1 Ohm (14.4V), providing the massive energy required to drive the most demanding subwoofer setups. Engineered for precision and impact, its optimized frequency response spans from 5Hz to 600Hz (Flat ON), ensuring powerful, clean bass that sets a new standard for low-frequency definition. The BRAVO BASS 8K includes a complete suite of professional audio controls, including variable Low Pass and Subsonic Filters, plus a versatile Bass Boost, giving you the ability to fine-tune your system for competition, daily driving, or simply maximum SPL. Despite its colossal power, it maintains a high Signal-to-Noise Ratio (> 90dB) and features a robust Smart Protection System for reliable, high-performance operation. Advanced Control & Competition Features Customizable Bass Impact: The BASS BOOST function offers variable gain from 0dB to +10dB at a selectable frequency between 30Hz and 70Hz to maximize low-end punch. Precision Filtering: Utilize the Low Pass Filter (30Hz ~ 250Hz) and the critical Subsonic Filter (5Hz ~ 40Hz) to protect your subwoofers and prevent reproduction of damaging frequencies. FLAT Mode Switch: Quickly bypass all Crossover and BASS BOOST settings for full-range (up to 600Hz) signal reproduction when desired. Reliability & Protection: Equipped with multiple COOLERs for efficient heat management and a Smart Protection System that monitors for faults like short circuits, overheating, and voltage fluctuations (indicated by the PROT LED). Wiring Recommendation: Due to the extreme power consumption, the use of 00 AWG or larger cables for power and ground connections is strongly recommended for optimal performance and safety. TECHNICAL SPECIFICATIONS CHARACTERISTIC Detail Number of Channels 1 RMS Power @ 1 Ohm (14.4V) 8200W RMS Power @ 2 Ohm (14.4V) 4900W Supply Voltage 9V ~ 17V DC Frequency Response (-3dB) FLAT ON 5Hz ~ 600Hz Frequency Response (-3dB) FLAT OFF 5Hz ~ 250Hz Crossover Low Pass (LPF) 30Hz ~ 250Hz (Variable) Crossover Subsonic Filter 5Hz ~ 40Hz (Variable) Bass Boost $0\text{dB} \sim +10\text{dB}$ (30Hz ~ 70Hz) Signal to Noise >90 dB Input Impedance 4.8K Ohms Musical Consumption 365A BASS Consumption 730A Dimensions (H x W x L) 3.14" x 9.11" x 16.49" Weight 13.22 lbs
$737.99
-
STETSOM BRAVO BASS 3K DIGITAL SUBWOOFER AMPLIFIER
Performance Focused on BASS and SUB BASS The Stetsom BRAVO BASS 3K is engineered for automotive sound lovers demanding maximum performance in BASS and SUB BASS frequencies. This Class D Mono Amplifier delivers a powerful 3000 Watts RMS at 1 Ohm (14.4V), providing the massive low-frequency power required for competition-level sound systems. Its exceptional frequency response, optimized from 8Hz to 600Hz (when FLAT mode is active), ensures powerful bass with clarity and definition for use with subwoofers and woofers. The unit features sophisticated audio controls, including a variable Subsonic Filter and a customizable Bass Boost, allowing for precision tuning and maximum speaker protection. Built with a compact design, the BRAVO BASS 3K offers high efficiency and a reliable Smart Protection System for long-lasting, high-impact performance. Key Features & Audio Controls Precision Crossover: Includes both a Low Pass Filter (30Hz ~ 250Hz) and a Subsonic Filter (8Hz ~ 40Hz) to perfectly match the amplifier to your subwoofers and protect them from damaging ultra-low frequencies. Customizable Bass: The BASS BOOST function offers variable gain from 0dB to +10dB at a selectable frequency between 30Hz and 70Hz, allowing you to dial in your preferred bass impact. FLAT Mode Switch: A convenient switch to instantly bypass all Crossover and BASS BOOST settings for quick configuration or maximum frequency output. Advanced Protection: Features a PROT (Protection) LED and a CLIP LED for quick diagnosis, monitoring for faults like overheating, short circuits, and signal saturation. Optimized Connections: Recommended wiring includes minimum 4 AWG for power and 8 AWG for speaker output (for 1 ohm load), ensuring maximum power transfer and safety. TECHNICAL SPECIFICATIONS CHARACTERISTIC Detail Number of Channels 1 RMS Power @ 1 Ohm (14.4V) 3000W RMS Power @ 2 Ohm (14.4V) 1800W Minimum Output Impedance 1 Ohm Supply Voltage 9V ~ 17V DC Frequency Response (-3dB) FLAT ON 8Hz ~ 600Hz Frequency Response (-3dB) FLAT OFF 8Hz ~ 250Hz Crossover Low Pass (LPF) 30Hz ~ 250Hz (Variable) Crossover Subsonic Filter 8Hz ~ 40Hz (Variable) Bass Boost 0 +10{dB} (30Hz ~ 70Hz) Signal to Noise >90 dB Input Sensitivity 200mV Input Impedance 5K Ohms Musical Consumption 132A BASS Consumption 265A Dimensions (H x W x L) 3.14" x 9.11" x 9.29" Weight 6.3 lbs
$344.99
-
Stetsom BRAVO BASS 5K Mono 1 Channel Class D Digital Subwoofer Amplifier
Massive Power & Precision Bass The Stetsom BRAVO BASS 5K is engineered specifically for automotive sound enthusiasts who demand maximum performance in BASS and SUB BASS. This Class D Mono Amplifier delivers a staggering 5200 Watts RMS at $1 \text{ Ohm}$ $(14.4\text{V})$, ensuring your subwoofers hit those deep, thunderous lows with unmatched power and clarity. With an optimized frequency response of $5\text{Hz}$ to $600\text{Hz}$ (when FLAT mode is ON), this amp provides powerful bass with exceptional definition. It offers advanced control features including a fully adjustable Low Pass Crossover, a precision Subsonic Filter, and a customizable Bass Boost to fine-tune your sound to competition standards. The amp also features a Smart Protection System and dedicated COOLERs to maintain optimal temperature and reliability under intense use. Advanced Control & Reliability Features Bass Boost Control: Variable control for increasing bass from 0dB to +10dB, with frequency selection from 30Hz to 70Hz. Subsonic Filter: Variable control to protect your subwoofers by precisely setting the initial frequency (from 5Hz to 40Hz) that the amplifier will reproduce. FLAT Switch: Allows you to quickly bypass all settings on the CROSSOVER and BASS BOOST controls for maximum frequency reproduction (up to 600Hz). Cooling System: Equipped with internal COOLERs for efficient amplifier cooling. Smart Protection System (PROT LED): Features a protection system that monitors for issues like overheating, short circuits, and low battery voltage, shutting down the amplifier to prevent damage. Recommended Wiring: For maximum power and safety, the manual recommends 00 AWG cable for positive/negative power connections and 7 AWG for speaker output. TECHNICAL SPECIFICATIONS Specification Detail Number of Channels 1 RMS Power @ 1 Ohm (14.4V) 5200W RMS Power @ 2 Ohm (14.4V) 2900W Supply Voltage 9V ~ 17V DC Frequency Response (-3dB) FLAT ON 5Hz ~ 600Hz Frequency Response (-3dB) FLAT OFF 5Hz ~ 250Hz Crossover Low Pass (LPF) 30Hz ~ 250Hz (Variable) Crossover Subsonic Filter 5Hz ~ 40Hz (Variable) Bass Boost 0 ~ +10dB (30Hz ~ 70Hz) Signal to Noise >90 dB Input Impedance 4.8K Ohms Musical Consumption 228A BASS Consumption 456A Dimensions (H x W x L) 3.14" x 9.11" x 13.11" Weight 9.50 lbs
$591.99
-
Sundown Audio Z-Series ZV7 18" Subwoofer
The Z v.7 is the third step up in Sundown's 2025 "ultra-high excursion" sub-woofer lineup after the M and X v.4 series. All models (12,15,18) feature our custom tooled and patented frames (US Patent Numbers D691597, D691598, and D741841) – the Sundown “mega-platform.” Please note – the Z v.7 is not available, aside from special orders, in 10s due to the motor size. We mate these new platform frames to a quad stacked 265mm (10.43”) diameter motor structure with a total magnet stack height of 100mm (3.94”) featuring a hyper-extended pole and extreme clearances (allowing over 4" p-p travel before mechanical bottom effectively making it bottomless). This is, by far, the largest motor we have ever produced on a Z series sub-woofer. The motor force factor (BL^2/RE) is ~50% higher than the previous generation Z v.6 series. This motor drives a 3.3" diameter 4-Layer Round Wire Aluminum Voice Coil wound on a thick aluminum former. These new round wire coils use a special Sundown designed “fat wire” winding method to handle significant amounts of power and abuse. Based on Sundown's years of experience with the Z v.4, 5, and 6 series we've also improved the voice coil ventilation yet again. The Z v.7 features an entirely new and patent-pending airflow directing pole cap, six pole OD channels, SIXTEEN gap vents, and a cross-drilled / slotted top plate to keep the voice coil running cool under extreme conditions.The Z v.7 motor also features a 9mm thick magnet ID Faraday ring which is locked into both the top and back plates. This ring combined with an all-new pole-extension inductance sleeve gives the Z v.7 the most linear inductive performance of any mega-platform sub-woofer to date. As if all of this were not enough to cement the Z v.7as a legend... we were also able to achieve 42mm of one-way linear excursion by 70% BL with an extremely uniform curve via our extensively FEA optimized motor and 95mm long voice-coil winding length. The Z v.7 series was designed from the ground-up to become the new standard in the low-frequency / small, ported box sub-woofer category in this price range. They will work in the same enclosures that are commonly used for Sundown Audio's mega-platform sub-woofers. The Z v.7 series, like its other mega-platform brethren, is really a different kind of woofer due to its incredibly linear suspension. They are designed for the LOWEST level of bass extension possible in a small enclosure while maintaining extremely low levels of distortion. Physical Dimensions: Download
$1,469.99
-
Sundown Audio SA-Series SA8M 8" Speakers
The all-new 2025 Sundown SA speaker series has been designed to make a statement. What statement, you may ask? That Sundown Audio can be just as serious about SQ as we are about SPL. Many people already know this but our subwoofers – even the ones used for crushing demos – have some of the lowest distortion on the market. We are now bringing our unique approach to the more dedicated Sound Quality market.Starting at the upper end of the frequency spectrum we have the SA-1T Tweeter. The SA-1T features a 25.5mm silk dome (total 38mm including surround) driven by a powerful neodymium motor structure. The dome features a compact, tuned back chamber which helps it to achieve its extremely low FS around 700hz. This gives you an enormous amount of flexibility in choosing the crossover. The tweeter can be used as a 2-way with the 6.5M or the 8M models or as part of a three way with either and the 3M model. In addition to the low FS and smooth response the SA-1T has a very high 92dB sensitivity so it doesn't take much power to get loud enough for just about anyone. The SA-1T is the 4th generation SA tweeter building on the success of the tweeter found in the SA Component sets over three generations.Headed down the spectrum to the midrange we have the SA-3M. This "little" unit is something incredibly special and is a favorite project of lead product designer / founder Jacob Fuller. We really went all-out on this unit to address the "big 3" drivers of distortion. The SA-3M features 4.5mm of one-way linear excursion by 70% BL (with 8mm x-mech thanks to the custom tooled frame – so no bottoming out even on powerful dynamics) and over 6mm by CMS and LE definitions on Klippel. There is essentially NO risk of the driver reaching linearity limits in most applications. The beefy motor structure is a combination of ferrite and a neodymium pole cap magnet to help us reach 84.5dB sensitivity at 1-watt. There is a double LE treatment internal to the motor via both a copper pole sleeve and an aluminum magnet ID shorting ring allowing the SA-3M to play full-range to beyond 20khz (although, for several reasons, we do suggest using a tweeter for the top-end). On the bottom end they can be high-pass crossed over at 300hz effortlessly with 150-watts of power handling (thanks to the 28mm diameter, extra-long voice coil) or even lower if needed, with less power, due to the incredibly high linear stroke. The suspension system, surround and spider, of the SA-3M took over a year of FEA simulations and testing to reach perfection and is just as important as the motor to the resulting low distortion. We gave the suspension just as much attention as we would for a full blown high-stroke subwoofer. To finish off this masterpiece we tested several different types of woven carbon fiber cones & dust caps to achieve the best FR possible.To finish off the 2025 SA speaker line we created the SA-6.5M and the SA-8M. Both of which can be used as a mid-bass or mid-range speaker depending on your application. Both drivers feature the same attention to detail as the 3M regarding the carbon cone and dust cap, surround, and spider. All of these parts were fully FEA simulated and Klippel verified.The SA-6.5M features 5.9mm one-way linear excursion by 70% BL, 7mm by CMS, and 6.28mm by LE on Klippel. Thanks to the efficient motor venting and ample voice coil the power handling is rated for 110-watts full range / 200-watts with a 70hz HPF filter with a respectable 89dB sensitivity. As with the SA-1T this is a 4th generation SA speaker due to the SA component set from prior generations. For this iteration we optimized it further and also created a new custom-tooled frame. The revised frame is more aerodynamics and also allows for superior coil ventilation. As with most Sundown products you will find a thick magnet-ID Faraday ring as well. Last, but absolutely not least, we have the SA-8M which takes linear stroke to yet another level. We were able to achieve 9mm one-way linear by 70% BL and nearly 10mm by CMS and LE standards. As with the 3M, the 8M features a pole sleeve and magnet ID faraday ring for LE treatment. This unit is an absolute powerhouse for mid-bass, and we believe it will make big waves in the SQ world. On the output side it has a 91.5dB sensitivity and will handle 130-watts full-range / 250-watts with a 70Hz HPF thanks to the efficient motor venting and huge 2" coil. The SA-8M is all-in on SQ and output potential – the Sundown way! Impedance 4 ohm RMS Watts 130 Max Watts 250 Max Frequency 20Khz Min Frequency 70hz Xmax 9mm QES 0.334 VAS 21.892 QMS 6.696 QTS 0.318 RE 3.2 Outer Diameter 8.26 Cutout Diameter 7.28 Mounting Depth 3.4 Magnet Material Ferrite Surround Material Rubber Basket Material Aluminum
$399.99
-
Sundown Audio SA-Series SA6.5M 6.5" Speakers
The all-new 2025 Sundown SA speaker series has been designed to make a statement. What statement, you may ask? That Sundown Audio can be just as serious about SQ as we are about SPL. Many people already know this but our subwoofers – even the ones used for crushing demos – have some of the lowest distortion on the market. We are now bringing our unique approach to the more dedicated Sound Quality market.Starting at the upper end of the frequency spectrum we have the SA-1T Tweeter. The SA-1T features a 25.5mm silk dome (total 38mm including surround) driven by a powerful neodymium motor structure. The dome features a compact, tuned back chamber which helps it to achieve its extremely low FS around 700hz. This gives you an enormous amount of flexibility in choosing the crossover. The tweeter can be used as a 2-way with the 6.5M or the 8M models or as part of a three way with either and the 3M model. In addition to the low FS and smooth response the SA-1T has a very high 92dB sensitivity so it doesn't take much power to get loud enough for just about anyone. The SA-1T is the 4th generation SA tweeter building on the success of the tweeter found in the SA Component sets over three generations.Headed down the spectrum to the midrange we have the SA-3M. This "little" unit is something incredibly special and is a favorite project of lead product designer / founder Jacob Fuller. We really went all-out on this unit to address the "big 3" drivers of distortion. The SA-3M features 4.5mm of one-way linear excursion by 70% BL (with 8mm x-mech thanks to the custom tooled frame – so no bottoming out even on powerful dynamics) and over 6mm by CMS and LE definitions on Klippel. There is essentially NO risk of the driver reaching linearity limits in most applications. The beefy motor structure is a combination of ferrite and a neodymium pole cap magnet to help us reach 84.5dB sensitivity at 1-watt. There is a double LE treatment internal to the motor via both a copper pole sleeve and an aluminum magnet ID shorting ring allowing the SA-3M to play full-range to beyond 20khz (although, for several reasons, we do suggest using a tweeter for the top-end). On the bottom end they can be high-pass crossed over at 300hz effortlessly with 150-watts of power handling (thanks to the 28mm diameter, extra-long voice coil) or even lower if needed, with less power, due to the incredibly high linear stroke. The suspension system, surround and spider, of the SA-3M took over a year of FEA simulations and testing to reach perfection and is just as important as the motor to the resulting low distortion. We gave the suspension just as much attention as we would for a full blown high-stroke subwoofer. To finish off this masterpiece we tested several different types of woven carbon fiber cones & dust caps to achieve the best FR possible.To finish off the 2025 SA speaker line we created the SA-6.5M and the SA-8M. Both of which can be used as a mid-bass or mid-range speaker depending on your application. Both drivers feature the same attention to detail as the 3M regarding the carbon cone and dust cap, surround, and spider. All of these parts were fully FEA simulated and Klippel verified.The SA-6.5M features 5.9mm one-way linear excursion by 70% BL, 7mm by CMS, and 6.28mm by LE on Klippel. Thanks to the efficient motor venting and ample voice coil the power handling is rated for 110-watts full range / 200-watts with a 70hz HPF filter with a respectable 89dB sensitivity. As with the SA-1T this is a 4th generation SA speaker due to the SA component set from prior generations. For this iteration we optimized it further and also created a new custom-tooled frame. The revised frame is more aerodynamics and also allows for superior coil ventilation. As with most Sundown products you will find a thick magnet-ID Faraday ring as well. Last, but absolutely not least, we have the SA-8M which takes linear stroke to yet another level. We were able to achieve 9mm one-way linear by 70% BL and nearly 10mm by CMS and LE standards. As with the 3M, the 8M features a pole sleeve and magnet ID faraday ring for LE treatment. This unit is an absolute powerhouse for mid-bass, and we believe it will make big waves in the SQ world. On the output side it has a 91.5dB sensitivity and will handle 130-watts full-range / 250-watts with a 70Hz HPF thanks to the efficient motor venting and huge 2" coil. The SA-8M is all-in on SQ and output potential – the Sundown way!Sold As A Pair
$349.99
-
XS Power XS Power PSX20Q 12V Group 20/20L AGM Powersports Battery
Deep Cycle 12-Volt AGM Powersports Battery Group 20Q Max Amps: 1,000 Cold Cranking Amps: 290 Reserve Capacity: 26 minutes M6 Terminal Hardware Incl. Charging Temp: 5°F: 120°F (-15°C to 50°C) Two Year Warranty 14.6 lbs. On the trail, on the job, or just having fun, the XS Power PSX20Q is perfect for powering your UTV, motorcycle, personal watercraft or snowmobile. Using Absorbent Glass Mat (AGM) technology, it easily delivers all the energy you need for aftermarket accessories like light bars, power inverters, winches, your car's audio system, or other electronics.The battery’s low internal resistance allows it to deliver an impressive 330 cranking amps, so your engine starts fast, even in extremely hot or cold weather. Its sealed construction keeps it completely safe from spills and moisture on even the roughest ride.See the specifications below.12V BCI Group 20Q, AGM Battery
$169.99
-
XS Power XS Power AKXP4-1 Amplifier Wiring Kit
XP FLEX, 1/0 AWG, AMP Kit
$79.99
-
XS Power XS Power HD-3400 Hold Down
Custom XS Battery Hold Down Made for XS 3400 Series Billet Aluminum Construction Give your battery a safe, secure home. The lightweight, aluminum hold-down features rugged construction to keep your battery in place. Rubber top, side, and corner bumpers included.3400/1400/1600/XP1000 Billet Aluminum Hold Down
$199.99
-
XS Power XS Power IKXS8 Battery Isolator
Isolator Kit 140A, XS Flex 4 AWG, Red Power Wire, Black Ground Wire, with Terminals
$79.99
-
XS Power XS Power 554 Battery Post Adaptor
I-BAR Marine Terminal Adaptor with 5/16 and 3/8" Studs - Top Only
$59.99
-
XS Power XS Power 590 Battery Post Adaptor
M6 to 3/8" (2) Stud Adaptors
$21.99
-
XS Power XS Power PSC15 15A Intelligent AGM Battery Charger/Power Supply
Intelligent AGM Battery Charger/Power Supply 15 Amps Remote LCD Display Charging & Status Indicators Three-Stage Microprocessor-Optimized Charging Constant Current/Constant Voltage Charger Auto Under-Voltage/10-Hour Shutoff Battery Reverse/Short Circuit/Overload Protection Integrated Cooling Fan This 15-amp IntelliSupply is equipped with an advanced microprocessor to quickly and safely recharge 12, 14, or 16-volt sealed, lead-acid batteries. This includes AGM (Absorbed Glass Mat), gel-cell, maintenance-free, and deep cycle batteries.The charger automatically measures progress to optimize charging performance, so you get the fastest charge possible without overcharging the battery. The remote display tells you voltage, charge rate, battery status, and when it’s ready to go!Storing your vehicle? Use the IntelliSupply to keep the battery safely charged, without unplugging it from the vehicle. The PSC’s built-in microprocessor brings the battery to full capacity, then maintains it without overcharging - so you’re ready to play whenever you want!The IntelliSupply can also act as a power supply, delivering constant power and current to your test bench, audio display and more.The charger can also save batteries that are at the end of their life or have been uncharged for a long time. Using Desulfation (aka “Recovery Mode”), the IntelliSupply can re-condition a battery, restoring its capacity for regular use.See details below.Power Supply with AGM Charge Mode
$299.99
-
XS Power XS Power HF1215 12V 15A Intellicharger Charger
12 Volt AGM Battery Charger 15 Amps LED Charging & Status Indicators Three-Stage Microprocessor-Optimized Charging Constant Current/Constant Voltage Charger Auto Under-Voltage/10-Hour Shutoff Battery Reverse/Short Circuit/Overload Protection Integrated Cooling Fan This 15-amp IntelliCharger is equipped with an advanced microprocessor to quickly and safely recharge 12-volt sealed, lead-acid batteries. This includes AGM (Absorbed Glass Mat), gel-cell, maintenance-free, and deep cycle.The charger automatically measures progress to optimize charging performance, so you get the fastest charge possible without overcharging the battery. The integrated multicolor LEDs tell you when your battery is charging, and when it’s ready to go!See details below.High Frequency AGM Battery IntelliCharger
$299.99
-
XS Power XS Power XV4700 XV Group 47 12V Series Lithium Titanate Battery
12-Volt LTO Battery Group 47 Cranking Amps: 670 Max Amps: 1,335 Wattage: 1,500 Amp Hours: 6 Equivalent AGM Amp Hours: 20 Designed for Stock Charging Systems Rated up to 140°F Weight: 6.4 lbs. M6 Terminal Hardware Included Weighing in at just over six pounds, the XS Power XV4700 Lithium Titanate Oxide (LTO) battery lasts up to five times longer than a traditional Group 47 AGM battery. Made to fit directly on your factory battery tray in many German and Japanese vehicles, including Audi, BMW, VW, Lexus, Subaru and more. Check the Battery Finder for more information.Use it as the main battery, or as a secondary power source in any vehicle for accessories like LED lighting, electronics or your high-power stereo. This lightweight lithium battery is compatible with stock or performance-style alternators up to 150 amps and supports an audio system up to 1,500 watts.See specifications below.12V BCI Group 47, Lithium Titanate Automotive Battery
$499.99
-
XS Power XS Power XP750 12 Volt 750 Amp Deep Cycle AGM Car Audio Battery/Power Cell
12-Volt AGM Secondary Battery Max Amps: 750 Wattage: 750 Reserve Capacity: 28 minutes M5 Terminal Hardware Incl. Two Year Warranty Use the XS Power XP750 as an additional 750-watt power plant just waiting to be tapped. Using Absorbent Glass Mat (AGM) technology, it easily delivers all the energy you need for aftermarket accessories like light bars, power inverters, winches, an audio system, or other electronics. Its sealed construction keeps it completely safe from spills and moisture even on the roughest trip.See the specifications below.12V AGM Secondary Battery
$129.99
-
XS Power XS Power PSX30L 12V Group 30L AGM Powersports Battery
Deep Cycle 12-Volt AGM Powersports Battery Group 30L Max Amps: 2,000 Cold Cranking Amps: 440 Reserve Capacity: 57 minutes M6 Terminal Hardware Incl. Charging Temp: 5°F: 120°F (-15°C to 50°C) Two Year Warranty 21 lbs. On the trail, on the job, or just having fun, the XS Power PSX30L is perfect for powering your UTV, motorcycle, personal watercraft or snowmobile. Using Absorbent Glass Mat (AGM) technology, it easily delivers all the energy you need for aftermarket accessories like light bars, power inverters, winches, your car's audio system, or other electronics. The popular Group 30L means it fits most Harley bikes, certain Yamaha jet ski's and many others!The battery’s low internal resistance allows it to deliver an impressive 500 cranking amps, so your engine starts fast, even in extremely hot or cold weather. Its sealed construction keeps it completely safe from spills and moisture on even the roughest ride.See the specifications below.12V BCI Group 30L, AGM Battery
$199.99
-
XS Power XS Power XP950 12 Volt 950 Amp Deep Cycle AGM Car Audio Battery/Power Cell
12-Volt AGM Secondary Battery Group U1R Max Amps: 950 Wattage: 950 Reserve Capacity: 50 minutes M6 Terminal Hardware Incl. Two Year Warranty Use the XS Power XP950 as an additional 950-watt power plant just waiting to be tapped. Using Absorbent Glass Mat (AGM) technology, it easily delivers all the energy you need for aftermarket accessories like light bars, power inverters, winches, an audio system, or other electronics. Its sealed construction keeps it completely safe from spills and moisture even on the roughest trip.See the specifications below.12V BCI Group U1R, AGM Secondary Battery
$174.99
-
XS Power XS Power PS925 12V 2000 Amp AGM Powersports Battery
Deep Cycle 12-Volt AGM Powersports Battery Max Amps: 2,000 Cold Cranking Amps: 564 Reserve Capacity: 59 minutes M6 Terminal Hardware Incl. Charging Temp: 5°F: 120°F (-15°C to 50°C) Two Year Warranty 22.26 lbs. On the trail, on the job, or just having fun, the XS Power PS925 is perfect for powering your UTV, motorcycle, personal watercraft or snowmobile. Using Absorbent Glass Mat (AGM) technology, it easily delivers all the energy you need for aftermarket accessories like light bars, power inverters, winches, your car's audio system, or other electronics.Use the PS925 as your main battery to power your ride. With plenty of juice in reserve, it can also power an audio system up to 1,000 watts. Using the PS925 as a secondary battery, you have a 2,000-watt capacity just waiting to be tapped. The battery’s low internal resistance allows it to deliver an impressive 641 cranking amps, so your engine starts fast, even in extremely hot or cold weather. Its sealed construction keeps it completely safe from spills and moisture on even the roughest ride.See the specifications below.12V AGM Battery, 1,000W/2,000W Range
$239.99
-
XS Power XS Power S925 12 Volt AGM 2000 Amp Sealed Starting/Racing Battery/Power Cell
12-Volt AGM Racing Battery Max Amps (Burst): 2,000 Cranking Amps: 641 Cold Cranking Amps: 564 Reserve Capacity: 59 minutes 586 & M6 Terminal Hardware Incl. Three Year Warranty Charging Temp: 5F to 120F (-15C to 50C) 22.26 lbs. The XS Power S925 AGM Racing Battery is equally at home on a track or in a daily driver. Weighing just over 22 pounds, the S925 delivers 3,300 max amps and 1,012 cold-cranking amps for fast, reliable starts. The sealed construction offers a spillproof, vibration-resistant design - perfect for the stress of racing and life on the road.With plenty of juice in reserve, it can run the vehicle plus up to 1,000 watts of aftermarket gear like the ECU, fuel pump, and gauges. Using the S925 as a secondary battery, you have an additional 2,000 watts of capacity just waiting to be tapped.Using Absorbent Glass Mat (AGM) technology, the S925 easily delivers all the energy you need to effortlessly start the motor and power your entire electrical grid. Its sealed construction keeps it completely safe from vibration, spills and moisture.See the details below.12V AGM Battery, 1,000W/2,000W Range
$239.99
-
XS Power XS Power D2700 12V 4300A 1300CA AGM Car Audio Battery/Powercell Group 27
12-Volt AGM Battery Group 27 Max Amps: 4,300 Cold Cranking Amps: 1,144 Reserve Capacity: 239 minutes M6 Terminal Hardware Incl. 3 Year Warranty 69.89 lbs. Extreme cranking power, enormous energy reserve, and unparalleled durability make the XS Power D2700 the premier AGM battery for many Domestic and Japanese models, including Lexus, Nissan, Dodge, and more. Check the Find My Battery link above for more information.The D2700 is perfect for powering your car, and everything in it. Using Absorbent Glass Mat (AGM) technology, it easily delivers all the energy you need for aftermarket accessories like your audio system, or other electronics. Its sealed construction keeps it completely safe from spills and moisture on even the roughest ride.The battery’s low internal resistance allows it to deliver an impressive 1,300 cranking amps, so your engine starts in extremely hot or cold weather. Use the D2700 as your main battery to power your vehicle. With plenty of juice in reserve, it can also power an audio system up to 3,500 watts. Using the D2700 as a secondary battery, you have a 4,500-watt capacity just waiting to be tapped for a larger audio system, high-power accessories and more.
$489.99
-
XS Power XS Power D2400 12V 3500A 1200CA AGM Car Audio Battery/Powercell Group 24
12-Volt AGM Battery Group 24 Max Amps: 3,500 Cold Cranking Amps: 1,056 Reserve Capacity: 186 minutes M6 Terminal Hardware Incl. 3 Year Warranty 59.92 lbs. Extreme cranking power, enormous energy reserve and unparalleled durability make the XS Power D2400 the premier AGM battery for many classic cars by American Motors, Buick, Chevy, Dodge, Fiat and many more. Check the Find My Battery link above for more information.The D2400 is perfect for powering your car, and everything in it. Using Absorbent Glass Mat (AGM) technology, it easily delivers all the energy you need for aftermarket accessories like your audio system, or other electronics. Its sealed construction keeps it completely safe from spills and moisture on even the roughest ride.The battery’s low internal resistance allows it to deliver an impressive 1,200 cranking amps, so your engine starts in extremely hot or cold weather. With plenty of juice in reserve, it can also power an audio system up to 2,500 watts. Using the D2400 as a secondary battery, you have a 4,000-watt capacity just waiting to be tapped.
$439.99
-
XS Power XS Power D5100 12V AGM 3100 Amp Battery/Power Cell+Terminal
12-Volt AGM Battery Group 51 Max Amps: 3,100 Cold Cranking Amps: 767 Reserve Capacity: 131 minutes M6 Terminal Hardware Incl. 3 Year Warranty 43.21 lbs. Extreme cranking power, enormous energy reserve and unparalleled durability make the XS Power D5100 the premier AGM battery for many Domestic and Japanese vehicles, including Dodge, Chrysler, Mitsubishi, Honda, and more. Check the Find My Battery tab above for more information.The D5100 is perfect for powering your car, and everything in it. Using Absorbent Glass Mat (AGM) technology, it easily delivers all the energy you need for aftermarket accessories like your audio system, or other electronics. Its sealed construction keeps it completely safe from spills and moisture on even the roughest ride.The battery’s low internal resistance allows it to deliver an impressive 872 cranking amps, so your engine starts in extremely hot or cold weather. Use the D5100 as your main battery to power your vehicle. With plenty of juice in reserve, it can also power an audio system up to 2,000 watts. As a powerful secondary battery, you have a 3,000-watt capacity just waiting to be tapped to power a winch, high-power stereo system and more.
$339.99
