Enclosures
-
Basshead Supply DC Audio Single 10" Level 3 Ported Enclosure
Custom built enclosure specifically for the DC Audio Level 3 10" subwoofer. Specifications: 1.15 cubic feet net enclosure 34.0 hz tuning 16.68 sq inches of port 11.5" x 1.45" port dimensions 9.35" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 13.0" tall 21.875" wide 14.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio Level 3 10" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$441.99
-
Basshead Supply DC Audio Single 12" XL Elite Ported Enclosure
Custom built enclosure specifically for the DC Audio XL Elite 12" subwoofer. Specifications: 2.0 cubic feet net enclosure 32.0 hz tuning 28.88 sq inches of port 14.0" x 2.0625" port dimensions 11.15" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 16.0" tall 21.875" wide 19.75" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio XL Elite 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$595.99
-
Basshead Supply DC Audio Single 15" XL Elite Ported Enclosure
Custom built enclosure specifically for the DC Audio XL Elite 15" subwoofer. Specifications: 4.25 cubic feet net enclosure 31.0 hz tuning 62.0 sq inches of port 16.0" x 3.875" port dimensions 14.25" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 18.0" tall 31.375" wide 23.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio XL Elite 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$892.99
-
Basshead Supply DC Audio Single 15" Level 3 Ported Enclosure
Custom built enclosure specifically for the DC Audio Level 3 15" subwoofer. Specifications: 3.5 cubic feet net enclosure 32.0 hz tuning 51.15 sq inches of port 15.5" x 3.3" port dimensions 14.0" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 17.0" tall 29.875" wide 20.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio Level 3 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$708.99
-
Basshead Supply DC Audio Single 12" Level 3 Ported Enclosure
Custom built enclosure specifically for the DC Audio Level 3 12" subwoofer. Specifications: 1.5 cubic feet net enclosure 33.0 hz tuning 21.6 sq inches of port 13.5" x 1.6" port dimensions 11.0" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 15.0" tall 19.5" wide 17.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio Level 3 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$472.99
-
Basshead Supply DC Audio Single 10" Level 4 Ported Enclosure
Custom built enclosure specifically for the DC Audio Level 4 10" subwoofer. Specifications: 1.15 cubic feet net enclosure 34.0 hz tuning 16.68 sq inches of port 11.5" x 1.45" port dimensions 9.35" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 13.0" tall 21.875" wide 14.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio Level 4 10" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$441.99
-
Basshead Supply DC Audio Single 12" Level 4 Ported Enclosure
Custom built enclosure specifically for the DC Audio Level 4 12" subwoofer. Specifications: 1.5 cubic feet net enclosure 33.0 hz tuning 21.6 sq inches of port 13.5" x 1.6" port dimensions 11.0" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 15.0" tall 19.5" wide 17.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio Level 4 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$472.99
-
Basshead Supply DC Audio Single 15" Level 4 Ported Enclosure
Custom built enclosure specifically for the DC Audio Level 4 15" subwoofer. Specifications: 3.5 cubic feet net enclosure 32.0 hz tuning 51.15 sq inches of port 15.5" x 3.3" port dimensions 14.0" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 17.0" tall 29.875" wide 20.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio Level 4 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$708.99
-
Basshead Supply DC Audio Single 10" XL SPL Ported Enclosure
Custom built enclosure specifically for the DC Audio XL SPL 10" subwoofer. Specifications: 1.25 cubic feet net enclosure 34.0 hz tuning 18.0 sq inches of port 12.0" x 1.5" port dimensions 9.35" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 14.0" tall 19.625" wide 17.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio XL SPL 10" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$490.99
-
Basshead Supply DC Audio Single 12" XL SPL Ported Enclosure
Custom built enclosure specifically for the DC Audio XL SPL 12" subwoofer. Specifications: 2.0 cubic feet net enclosure 32.0 hz tuning 28.88 sq inches of port 14.0" x 2.0625" port dimensions 11.0" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 16.0" tall 21.875" wide 19.75" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio XL SPL 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$595.99
-
Basshead Supply DC Audio Single 15" XL SPL Ported Enclosure
Custom built enclosure specifically for the DC Audio XL SPL 15" subwoofer. Specifications: 4.25 cubic feet net enclosure 31.0 hz tuning 62.0 sq inches of port 16.0" x 3.875" port dimensions 14.0" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 18.0" tall 31.375" wide 23.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio XL SPL 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$892.99
-
Basshead Supply DC Audio Dual 10" Level 3 Ported Enclosure
Custom built enclosure specifically for the DC Audio Level 3 10" subwoofer. Specifications: 2.3 cubic feet net enclosure 34.0 hz tuning 33.06 sq inches of port 11.5" x 2.875" port dimensions 9.35" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 3/4" (18mm) center baffle brace 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 13.0" tall 30.25" wide 18.25" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio Level 3 10" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$599.99
-
Basshead Supply DC Audio Dual 15" XL SPL Ported Enclosure
Custom built enclosure specifically for the DC Audio XL SPL 15" subwoofer. Specifications: 8.5 cubic feet net enclosure 31.0 hz tuning 122.4 sq inches of port 20.0" x 6.12" port dimensions 14.0" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 22.0" tall 47.546028" wide 22.625" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio XL SPL 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,653.99
-
Basshead Supply DC Audio Dual 15" Level 3 Ported Enclosure
Custom built enclosure specifically for the DC Audio Level 3 15" subwoofer. Specifications: 7.0 cubic feet net enclosure 32.0 hz tuning 101.4 sq inches of port 19.5" x 5.2" port dimensions 14.0" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 3/4" (18mm) center baffle brace 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 21.0" tall 40.0" wide 22.2" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio Level 3 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,063.99
-
Basshead Supply DC Audio Dual 10" Level 4 Ported Enclosure
Custom built enclosure specifically for the DC Audio Level 4 10" subwoofer. Specifications: 2.3 cubic feet net enclosure 34.0 hz tuning 33.06 sq inches of port 11.5" x 2.875" port dimensions 9.35" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 3/4" (18mm) center baffle brace 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 13.0" tall 30.25" wide 18.25" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio Level 4 10" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$599.99
-
Basshead Supply DC Audio Dual 12" Level 4 Ported Enclosure
Custom built enclosure specifically for the DC Audio Level 4 12" subwoofer. Specifications: 3.0 cubic feet net enclosure 33.0 hz tuning 43.2 sq inches of port 13.5" x 3.2" port dimensions 11.0" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 3/4" (18mm) center baffle brace 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 15.0" tall 33.625" wide 18.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio Level 4 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$661.99
-
Basshead Supply DC Audio Dual 15" Level 4 Ported Enclosure
Custom built enclosure specifically for the DC Audio Level 4 15" subwoofer. Specifications: 7.0 cubic feet net enclosure 32.0 hz tuning 101.4 sq inches of port 19.5" x 5.2" port dimensions 14.0" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 3/4" (18mm) center baffle brace 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 21.0" tall 40.0" wide 22.2" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio Level 4 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,063.99
-
Basshead Supply DC Audio Dual 12" Level 5 Ported Enclosure
Custom built enclosure specifically for the DC Audio Level 5 12" subwoofer. Specifications: 4.0 cubic feet net enclosure 32.0 hz tuning 58.125 sq inches of port 15.0" x 3.875" port dimensions 11.15" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 17.0" tall 36.818208" wide 20.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio Level 5 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$839.99
-
Basshead Supply DC Audio Dual 15" Level 5 Ported Enclosure
Custom built enclosure specifically for the DC Audio Level 5 15" subwoofer. Specifications: 8.5 cubic feet net enclosure 31.0 hz tuning 122.4 sq inches of port 20.0" x 6.12" port dimensions 14.25" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 22.0" tall 47.625" wide 22.625" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio Level 5 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,653.99
-
Basshead Supply DC Audio Dual 15" Level 6 Ported Enclosure
Custom built enclosure specifically for the DC Audio Level 6 15" subwoofer. Specifications: 8.5 cubic feet net enclosure 31.0 hz tuning 122.4 sq inches of port 20.0" x 6.12" port dimensions 14.25" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 22.0" tall 47.625" wide 22.625" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio Level 6 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,653.99
-
Basshead Supply DC Audio Dual 12" NEO 3.5 Ported Enclosure
Custom built enclosure specifically for the DC Audio NEO 3.5 12" subwoofer. Specifications: 4.0 cubic feet net enclosure 32.0 hz tuning 58.125 sq inches of port 15.0" x 3.875" port dimensions 11.15" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 17.0" tall 36.818208" wide 20.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio NEO 3.5 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$839.99
-
Basshead Supply DC Audio Dual 15" NEO 3.5 Ported Enclosure
Custom built enclosure specifically for the DC Audio NEO 3.5 15" subwoofer. Specifications: 8.5 cubic feet net enclosure 31.0 hz tuning 122.4 sq inches of port 20.0" x 6.12" port dimensions 14.25" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 22.0" tall 47.625" wide 22.625" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio NEO 3.5 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,653.99
-
Basshead Supply DC Audio Dual 12" XL Elite Ported Enclosure
Custom built enclosure specifically for the DC Audio XL Elite 12" subwoofer. Specifications: 4.0 cubic feet net enclosure 32.0 hz tuning 58.12 sq inches of port 15.0" x 3.875" port dimensions 11.15" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 17.0" tall 36.875" wide 20.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio XL Elite 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$839.99
-
Basshead Supply DC Audio Dual 15" NEO 4.0 Ported Enclosure
Custom built enclosure specifically for the DC Audio NEO 4.0 15" subwoofer. Specifications: 8.5 cubic feet net enclosure 31.0 hz tuning 122.4 sq inches of port 20.0" x 6.12" port dimensions 14.25" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 22.0" tall 47.625" wide 22.625" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio NEO 4.0 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,653.99
