Enclosures
-
Basshead Supply American Bass Single 18" Godzilla Ported Enclosure
Custom built enclosure specifically for the American Bass Godzilla 18" subwoofer. Specifications: 6.0 cubic feet net enclosure 30.0 hz tuning 87.75 sq inches of port 18.0" x 4.875" port dimensions 16.75" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.625" wide 22.625" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass Godzilla 18" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,074.99
-
Basshead Supply American Bass Single 18" King Ported Enclosure
Custom built enclosure specifically for the American Bass King 18" subwoofer. Specifications: 6.0 cubic feet net enclosure 30.0 hz tuning 87.75 sq inches of port 18.0" x 4.875" port dimensions 16.75" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.625" wide 22.625" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass King 18" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,074.99
-
Basshead Supply American Bass Single 18" XMAXXX Monster Ported Enclosure
Custom built enclosure specifically for the American Bass XMAXXX Monster 18" subwoofer. Specifications: 6.0 cubic feet net enclosure 30.0 hz tuning 87.75 sq inches of port 18.0" x 4.875" port dimensions 16.75" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.625" wide 22.625" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass XMAXXX Monster 18" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,074.99
-
Basshead Supply Sundown Audio Single 18" M Series MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio M Series 18" subwoofer. Specifications: 6.946356 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.581893" port dimensions 16.69" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio M Series 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$803.39
-
Basshead Supply Sundown Audio Single 18" NSV2 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio NSV2 18" subwoofer. Specifications: 6.946228 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.58179" port dimensions 16.68" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio NSV2 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$803.39
-
Basshead Supply Sundown Audio Single 18" NSV3 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio NSV3 18" subwoofer. Specifications: 6.946356 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.581893" port dimensions 16.69" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio NSV3 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$803.39
-
Basshead Supply Sundown Audio Single 18" NSV4 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio NSV4 18" subwoofer. Specifications: 6.946356 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.581893" port dimensions 16.69" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio NSV4 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$803.39
-
Basshead Supply Sundown Audio Single 18" NSV5 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio NSV5 18" subwoofer. Specifications: 6.946356 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.581893" port dimensions 16.69" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio NSV5 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$803.39
-
Basshead Supply Sundown Audio Single 18" SAV2 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio SAV2 18" subwoofer. Specifications: 5.476206 cubic feet net enclosure 30.0 hz tuning 79.22 sq inches of port 16.25" x 4.85391" port dimensions 16.69" subwoofer cut out 3/4" triple refined MDF construction Solid 1" baffle for ultimate strength Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 17.75" tall 39.875" wide 21.75" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio SAV2 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 3/4" triple refined MDF — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 3/4" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$553.19
-
Basshead Supply Sundown Audio Single 18" NSV6 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio NSV6 18" subwoofer. Specifications: 6.946356 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.581893" port dimensions 16.69" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio NSV6 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$803.39
-
Basshead Supply Sundown Audio Single 18" SAV3 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio SAV3 18" subwoofer. Specifications: 5.476206 cubic feet net enclosure 30.0 hz tuning 79.22 sq inches of port 16.25" x 4.85391" port dimensions 16.69" subwoofer cut out 3/4" triple refined MDF construction Solid 1" baffle for ultimate strength Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 17.75" tall 39.875" wide 21.75" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio SAV3 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 3/4" triple refined MDF — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 3/4" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$553.19
-
Basshead Supply Sundown Audio Single 18" UV2 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio UV2 18" subwoofer. Specifications: 5.729205 cubic feet net enclosure 30.0 hz tuning 83.28 sq inches of port 16.25" x 5.106465" port dimensions 16.9" subwoofer cut out 3/4" triple refined MDF construction Solid 1" baffle for ultimate strength Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 17.75" tall 39.875" wide 22.75" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio UV2 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 3/4" triple refined MDF — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 3/4" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$581.39
-
Basshead Supply Sundown Audio Single 18" UV1 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio UV1 18" subwoofer. Specifications: 5.718857 cubic feet net enclosure 30.0 hz tuning 83.28 sq inches of port 16.25" x 5.097243" port dimensions 16.69" subwoofer cut out 3/4" triple refined MDF construction Solid 1" baffle for ultimate strength Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 17.75" tall 39.75" wide 22.75" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio UV1 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 3/4" triple refined MDF — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 3/4" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$581.39
-
Basshead Supply Sundown Audio Single 18" XV2 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio XV2 18" subwoofer. Specifications: 6.946356 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.581893" port dimensions 16.69" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio XV2 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$803.39
-
Basshead Supply Sundown Audio Single 18" ZV2 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio ZV2 18" subwoofer. Specifications: 6.946228 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.58179" port dimensions 16.68" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV2 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$803.39
-
Basshead Supply Sundown Audio Single 18" ZV3 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio ZV3 18" subwoofer. Specifications: 6.946228 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.58179" port dimensions 16.68" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV3 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$803.39
-
Basshead Supply Sundown Audio Single 18" XV4 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio XV4 18" subwoofer. Specifications: 6.946356 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.581893" port dimensions 16.69" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio XV4 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$803.39
-
Basshead Supply Sundown Audio Single 18" ZV4 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio ZV4 18" subwoofer. Specifications: 6.946356 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.581893" port dimensions 16.69" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV4 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$803.39
-
Basshead Supply Sundown Audio Single 18" ZV6 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio ZV6 18" subwoofer. Specifications: 6.946356 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.581893" port dimensions 16.69" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV6 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$803.39
-
Basshead Supply Sundown Audio Single 18" ZV5 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio ZV5 18" subwoofer. Specifications: 6.946356 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.581893" port dimensions 16.69" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV5 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$803.39
-
Basshead Supply Sundown Audio Single 18" ZV7 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio ZV7 18" subwoofer. Specifications: 6.946356 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.581893" port dimensions 16.69" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV7 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$803.39
-
Basshead Supply Sundown Audio Single 18" XV3 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio XV3 18" subwoofer. Specifications: 6.946356 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.581893" port dimensions 16.69" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio XV3 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$803.39
-
Basshead Supply Kicker Single 18" L7X Ported Enclosure
Custom built enclosure specifically for the Kicker L7X 18" subwoofer. Specifications: 7.5 cubic feet net enclosure 28.0 hz tuning 114.0 sq inches of port 19.0" x 6.0" port dimensions 16.5" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Bare unfinished birch — ready to stain, paint or clear-coat Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 21.0" tall 39.84057" wide 27.5" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Kicker L7X 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at our most affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship bare and unfinished — sanded birch with the raw plywood grain left exposed, ready to stain, paint or clear-coat to your own taste, so you can match it to your build and save versus our finished enclosures. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, all the hard work is done — just add your finish of choice. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$938.59
-
Basshead Supply Kicker Dual 8" L7 Ported Enclosure
Custom built enclosure specifically for the Kicker L7 8" subwoofer. Specifications: 1.5 cubic feet net enclosure 34.0 hz tuning 21.0 sq inches of port 10.5" x 2.0" port dimensions 7.375" subwoofer cut out 3/4" (18mm) plywood construction 3/4" (18mm) center baffle brace 13 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 12.0" tall 23.826301" wide 17.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Kicker L7 8" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our strong baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 1000W RMS (dual enclosures - 2000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$440.99
