Basshead Supply
-
Basshead Supply 12″ Carbon Fiber Subwoofer Cone - Big Roll - 4″ Opening
12″ Carbon Fiber Subwoofer Cone - Big Roll - 4″ Opening Cone body Material: Carbon Fiber Surround Material: Foam Cone Height: 1.97″ (50mm) Outer Diameter: 11.81″ (300mm) Surround Height: 1.06″ (27mm) Surround Width: 1.33″ (34mm) Voice Coil Opening: 3.97″ (101mm) Cone Mass: Coming Soon Dust Cap Notch: None
$79.99
-
Basshead Supply 15″ Carbon Fiber Subwoofer Cone - U Roll - 3″ Opening
15″ Carbon Fiber Subwoofer Cone - U Roll - 3″ Opening Cone body Material: Carbon Fiber Surround Material: Foam Cone Height: 2.75″ (70mm) Outer Diameter: 14.7638″ (375mm) Surround Height: 1.06″ (27mm) Surround Width: 1.18″ (30mm) Voice Coil Opening: 3.07″ (78mm) Cone Mass: Coming Soon Dust Cap Notch: None
$109.99
-
Basshead Supply 15″ Carbon Fiber Subwoofer Cone - Big Roll - 4″ Opening
15″ Carbon Fiber Subwoofer Cone - Big Roll - 4″ Opening Cone body Material: Carbon Fiber Surround Material: Foam Cone Height: 3.14″ (80mm) Outer Diameter: 14.7638″ (375mm) Surround Height: 1.18″ (30mm) Surround Width: 1.57″ (40mm) Voice Coil Opening: 3.97″ (101mm) Cone Mass: Coming Soon Dust Cap Notch: None
$109.99
-
Basshead Supply 15″ Carbon Fiber Subwoofer Cone - U Roll - 4″ Opening
15″ Carbon Fiber Subwoofer Cone - U Roll - 4″ Opening Cone body Material: Carbon Fiber Surround Material: Foam Cone Height: 3.11″ (79mm) Outer Diameter: 14.7638″ (375mm) Surround Height: 1.06″ (27mm) Surround Width: 1.18″ (30mm) Voice Coil Opening: 3.97″ (101mm) Cone Mass: Coming Soon Dust Cap Notch: None
$109.99
-
Basshead Supply 18″ Carbon Fiber Subwoofer Cone - Big Roll - 3″ Opening
18″ Carbon Fiber Subwoofer Cone - Big Roll - 3″ Opening Cone body Material: Carbon Fiber Surround Material: Foam Cone Height: 3.54″ (90mm) Outer Diameter: 17.91″ (455mm) Surround Height: 1.38″ (35mm) Surround Width: 1.77″ (45mm) Voice Coil Opening: 3.07″ (78mm) Cone Mass: Coming Soon Dust Cap Notch: None
$134.99
-
Basshead Supply Deaf Bonce Dual 10" SA310 Ported Enclosure
Custom built enclosure specifically for the Deaf Bonce SA310 10" subwoofer. Specifications: 3.0 cubic feet net enclosure 33.0 hz tuning 43.5 sq inches of port 12.0" x 3.625" port dimensions 9.33" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 14.0" tall 30.25" wide 22.5" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Deaf Bonce SA310 10" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$699.99
-
Basshead Supply 18″ Carbon Fiber Subwoofer Cone - Big Roll - 4″ Opening
18″ Carbon Fiber Subwoofer Cone - Big Roll - 4″ Opening Cone body Material: Carbon Fiber Surround Material: Foam Cone Height: 3.93″ (100mm) Outer Diameter: 17.91″ (455mm) Surround Height: 1.38″ (35mm) Surround Width: 1.77″ (45mm) Voice Coil Opening: 3.97″ (101mm) Cone Mass: Coming Soon Dust Cap Notch: None
$134.99
-
Basshead Supply JL Audio Single 12" W7 Ported Enclosure
Custom built enclosure specifically for the JL Audio W7 12" subwoofer. Specifications: 2.0 cubic feet net enclosure 33.0 hz tuning 28.69 sq inches of port 13.5" x 2.125" port dimensions 10.05" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 15.0" tall 24.25" wide 17.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a JL Audio W7 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$535.99
-
Basshead Supply JL Audio Dual 12" W7 Ported Enclosure
Custom built enclosure specifically for the JL Audio W7 12" subwoofer. Specifications: 4.0 cubic feet net enclosure 33.0 hz tuning 57.38 sq inches of port 13.5" x 4.25" port dimensions 10.5" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 3/4" (18mm) center baffle brace 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 15.0" tall 34.25" wide 22.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a JL Audio W7 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$755.99
-
Basshead Supply JL Audio Single 13.5" W7 Ported Enclosure
Custom built enclosure specifically for the JL Audio W7 13.5" subwoofer. Specifications: 2.5 cubic feet net enclosure 32.0 hz tuning 36.25 sq inches of port 14.5" x 2.5" port dimensions 11.9" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 16.0" tall 24.25" wide 19.75" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a JL Audio W7 13.5" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$603.99
-
Basshead Supply JL Audio Dual 13.5" W7 Ported Enclosure
Custom built enclosure specifically for the JL Audio W7 13.5" subwoofer. Specifications: 5.0 cubic feet net enclosure 32.0 hz tuning 72.1875 sq inches of port 16.5" x 4.375" port dimensions 11.9" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 3/4" (18mm) center baffle brace 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 18.0" tall 39.378157" wide 20.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a JL Audio W7 13.5" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$866.99
-
Basshead Supply JL Audio Single 10" W7 Ported Enclosure
Custom built enclosure specifically for the JL Audio W7 10" subwoofer. Specifications: 1.5 cubic feet net enclosure 33.0 hz tuning 21.88 sq inches of port 12.5" x 1.75" port dimensions 8.74" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 14.0" tall 20.25" wide 17.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a JL Audio W7 10" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$472.99
-
Basshead Supply JL Audio Dual 10" W7 Ported Enclosure
Custom built enclosure specifically for the JL Audio W7 10" subwoofer. Specifications: 3.0 cubic feet net enclosure 33.0 hz tuning 42.19 sq inches of port 13.5" x 3.125" port dimensions 8.74" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 3/4" (18mm) center baffle brace 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 15.0" tall 32.25" wide 18.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a JL Audio W7 10" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$661.99
-
Basshead Supply 18" D1 Subwoofer Prototype - 2000W RMS - BS-70
2000W RMS D1 Flat Aluminum Voice Coils Paper cone Carbon fiber dust cap 1 year warranty on manufacturer defects Actual item pictured in photos Box: 5-6.5 cubes ported Matching pair to BS-71, BS-72, BS-73
$450.00
-
Basshead Supply Kicker Single 12" L7X Ported Enclosure
Custom built enclosure specifically for the Kicker L7X 12" subwoofer. Specifications: 2.75 cubic feet net enclosure 31.0 hz tuning 42.88 sq inches of port 14.0" x 3.0625" port dimensions 11.0625" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 16.0" tall 29.75" wide 19.75" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Kicker L7X 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$665.99
-
Basshead Supply Kicker Single 10" L7X Ported Enclosure
Custom built enclosure specifically for the Kicker L7X 10" subwoofer. Specifications: 1.85 cubic feet net enclosure 32.0 hz tuning 28.5 sq inches of port 12.0" x 2.375" port dimensions 9.3125" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 14.0" tall 26.0" wide 18.375" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Kicker L7X 10" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$566.99
-
Basshead Supply 18" D1 Subwoofer Prototype - 2000W RMS - BS-71
2000W RMS D1 Flat Aluminum Voice Coils Paper cone Carbon fiber dust cap 1 year warranty on manufacturer defects Actual item pictured in photos Box: 5-6.5 cubes ported Matching Pair to BS-70, BS-72, BS-73
$450.00
-
Basshead Supply Kicker Single 15" L7X Ported Enclosure
Custom built enclosure specifically for the Kicker L7X 15" subwoofer. Specifications: 4.75 cubic feet net enclosure 30.0 hz tuning 74.0 sq inches of port 16.0" x 4.625" port dimensions 13.75" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 18.0" tall 36.25" wide 23.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Kicker L7X 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$899.99
-
Basshead Supply 18" D1 Subwoofer Prototype - 2000W RMS - BS-73
2000W RMS D1 Flat Aluminum Voice Coils Paper cone Carbon fiber dust cap 1 year warranty on manufacturer defects Actual item pictured in photos Box: 5-6.5 cubes ported Matching Pair to BS-70 , BS-71, BS-72
$450.00
-
Basshead Supply Kicker Dual 10" L7X Ported Enclosure
Custom built enclosure specifically for the Kicker L7X 10" subwoofer. Specifications: 3.33 cubic feet net enclosure 32.0 hz tuning 51.19 sq inches of port 13.0" x 3.9375" port dimensions 9.3125" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 15.0" tall 33.5" wide 22.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Kicker L7X 10" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$766.99
-
Basshead Supply Kicker Dual 12" L7X Ported Enclosure
Custom built enclosure specifically for the Kicker L7X 12" subwoofer. Specifications: 4.95 cubic feet net enclosure 31.0 hz tuning 76.0 sq inches of port 16.0" x 4.75" port dimensions 11.0625" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 18.0" tall 37.375" wide 23.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Kicker L7X 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$899.99
-
Basshead Supply American Bass Single 10" XFL Ported Enclosure
Custom built enclosure specifically for the American Bass XFL 10" subwoofer. Specifications: 1.25 cubic feet net enclosure 34.0 hz tuning 17.82 sq inches of port 11.5" x 1.55" port dimensions 9.375" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 13.0" tall 22.875" wide 14.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass XFL 10" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$420.29
-
Basshead Supply American Bass Single 12" XFL Ported Enclosure
Custom built enclosure specifically for the American Bass XFL 12" subwoofer. Specifications: 2.0 cubic feet net enclosure 33.0 hz tuning 28.69 sq inches of port 13.5" x 2.125" port dimensions 11.4" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 15.0" tall 24.25" wide 17.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass XFL 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$510.29
-
Basshead Supply 18" D1 Subwoofer Prototype - 2000W RMS - BS-72
2000W RMS D1 Flat Aluminum Voice Coils Paper cone Carbon fiber dust cap 1 year warranty on manufacturer defects Actual item pictured in photos Box: 5-6.5 cubes ported Matching Pair to BS-70 , BS-71, BS-73
$450.00
