All Products
-
Incriminator Audio Incriminator Audio DPX-6 150W RMS Pro Car Audio Midbass/Midrange Speaker
Features 150 Watts RMS 4-Ohm or 8-Ohm Impedance 6.5" Pro Midbass Woofer 4 ohm or 8 ohm Configurations 1.5" Voice Coil Black Cast Aluminum Basket 20 oz Motor Molded Embossed Motor Boot Machined Aluminum Phase Plug Silver Push Terminals Ships directly from Incriminator Audio Sold Individually
$69.00
-
DC Audio DC Audio Level 4 15" Dual-1-Ohm 1500W RMS / 3000W Peak Car Audio Subwoofer/Sub
The Level 4 m3 was designed to take even more power and get even louder than the m2. With fantastic power handling and smashing lows its hard to beat. The Level 4 sub is a large triple stacked motor with a chrome top plate and T yoke yielding 23.5mm of X-Max. Furthermore, you get the upgraded triple progressive spiders, cone, surround, 3" coil, cast basket, push terminals and upgraded lead wire sewn to the spider. This sub is rated at 1500w RMS and 3000w peak. Sub Size 10" 12" 15" 18" Mounting Depth 6.25" 6.75" 8" 9.5" Mounting Hole Diameter 9.25" 11" 14" 16.75" Outside Driver Diameter 11.0" 12.5" 15.7" 18.5" Motor Width 7.75" 7.75" 7.75" 7.75" Weight 32lbs 33lbs 33.5lbs 36lbs VC Diameter 3" 3" 3" 3" Displacement .16³ ft .18³ ft .21³ ft .26³ ft Magnet Weight 29lbs 29lbs 29lbs 29lbs Power Handling RMS/Peak 1500 / 3000 1500 / 3000 1500 / 3000 1500 / 3000 Impedance (Ohm) D1 or D2 D1 or D2 D1 or D2 D1 or D2 Sd 324cm² 481cm² 823cm² 1217cm² Vas 12.42 liters 27.38 liters 80.16 liters 175.29 liters Cms .085 mm/N .085 mm/N .085 mm/N .085 mm/N Mms 184.5 g 207.53 g 318.5 g 427.53 g Fs 40.2 Hz 37.9 Hz 30.6 Hz 26.4 Hz BL 19.18 NA 19.18 NA 19.18 NA 19.18 NA Re 3.82 Ohm 3.82 Ohm 3.82 Ohm 3.82 Ohm Le 3.78 mH 3.78 mH 3.78 mH 3.78 mH Qms 7.77 8.24 10.2 11.82 Qes .49 .52 .644 .746 Qts .461 .489 .60 .701 Xmax 23.5 mm 23.5 mm 23.5 mm 23.5 mm Ref SPL @ 1 watt 84 dB 86.4 dB 87.4 dB 88.2 dB Suggested Sealed .75³ ft 1³ ft 2.75³ ft 4³ ft Suggested Ported 1.0³ ft 1.5³ ft 3.0³ ft 5.5³ ft Key Features • Extremely rigid non-pressed paper cone assembly • Multilayered polymer foam surround • Polypropylene dust cover with DC logo • Triple 8” OD semi cup progressive roll spider • Extra heavy duty interweaved tinsel lead wire sewn to spider • Cast aluminum black frame • FEA analyzed and optimized motor assembly – Fully CNC machined • Rubber mounting gasket • Chrome spring loaded push terminals • 3” Hi-temp Aluminum voice coil wound on black anodized voice coil former
$409.99
-
DC Audio DC Audio Level 3 15" Dual-4-Ohm 1000W RMS / 2000W Peak Car Audio Subwoofer/Sub
The level 3 sub is the ultimate daily driver sub. It puts out the low lows with lots of output designed for sealed or ported enclosures. The Level 3 sub is a triple stacked FEA optimized motor wrapped in a magnet boot, chrome top plate and T yoke. The deep gap offers more X-max for a total of 22.5mm. This sub also comes with dual upgraded progressive spiders, cone, surround, 3" voice coil, cast basket, push terminals, and upgraded sewn down lead wire. We give the Level 3 a power rating of 1000w RMS/2000w peak. Sub Size 10" 12" 15" 18" Mounting Depth 6.25" 6.75" 8" 9.5" Mounting Hole Diameter 9.35" 11" 14" 16.75" Outside Driver Diameter 11" 12.5" 15.7" 18.5" Motor Width 7" 7" 7" 7" Weight 20lbs 20.5lbs 21.5lbs 22lbs VC Diameter 3" 3" 3" 3" Displacement .15³ ft .16³ ft .18³ ft .22³ ft Magnet Weight 18lbs 18lbs 18lbs 18lbs Power Handling RMS/Peak 1000 / 2000 1000 / 2000 1000 / 2000 1000 / 2000 Impedance (Ohm) D1/D2/D4 D1/D2/D4 D1/D2/D4 D1/D2/D4 Sd 324cm² 481cm² 823cm² 1217cm² Vas 13.16 liters 28.99 liters 84.88 liters 185.6 liters Cms 0.09 mm/N 0.09 mm/N 0.09 mm/N 0.09 mm/N Mms 190 g 225 g 295 g 305 g Fs 38.5 35.4 30.9 30.4 BL 17.2 N/A 17.2 N/A 17.2 N/A 17.2 N/A Re 3.6 Ohm 3.6 Ohm 3.6 Ohm 3.6 Ohm Le 3.5 mH 3.5 mH 3.5 mH 3.5 mH Qms 7.66 8.33 8.18 8.32 Qes 0.567 0.617 0.706 0.718 Qts 0.528 0.574 0.65 0.661 Xmax 23 mm 23 mm 23 mm 23 mm Ref SPL @ 1 watt 83.1 dB (86.6@2.83V) 85 dB (88.5@2.83V) 87.3 dB (90.8@2.83V) 90.4 dB (93.9@2.83V) Suggested Sealed .65³ ft 1³ ft 2³ ft 4³ ft Suggested Ported 1.0³ ft 1.25³ ft 3.0³ ft 5.5³ ft Key Features • Extremely rigid non-pressed paper cone assembly • Multilayered polymer foam surround • Polypropylene dust cover with DC logo • Dual 8” OD semi cup progressive roll spider • Extra heavy duty interweaved tinsel lead wire sewn to spider • Cast aluminum black frame • FEA analyzed and optimized motor assembly – Fully CNC machined • Rubber mounting gasket • Chrome spring loaded push terminals • Dual 4 ohm 3” Hi-temp Aluminum voice coil wound on black anodized voice coil former
$329.99
-
DC Audio DC Audio A3 90.4K 520 Watt 4-Channel Car Audio Amplifier/Amp 90x4 130x4 250x2
The 90.4 Competition series amplifer is a 90 watts per channel @ 4 ohms or 130 watts per channel @ 2 ohms. This amp has a fully active crossover and lots of clean power for the SQ minded builds. Its also fits installs where you may want to amplify your front stage and bridge the rear 2 channels to your sub stage and have a bass knob to control it. Versatility is what this amp is all about. Key Features • Variable high pass filter • Variable Band pass filter • 8awg Speaker Connections • 4awg inputs • Input mode Switch • Dual power Transformers • Double Sided Printed Circuit Board • Class A/B • Fully Active Crossover Features Voltage 90.4 Output Power (RMS) 4 ohm 14.4V 90Wx4 2 ohm 130Wx4 1 ohm n/a 4 ohm mono 14.4V 250Wx2 1 ohm 18V n/a Input Sensitivity 6V~0.2V Frequency Response Hz 20Hz~20KHz 12dB / Octave Crossover CH1/2 Subsonic Filter : 10Hz ~ 100Hz Crossover : 50Hz(500Hz) ~ 5ooHz(5KHZ ) Multiply : x1, x10 Crossover Selector Switch : HPF / FULL / LP-BP Bass Boost : 0~18dB CH3/4 Subsonic Filter : 10Hz ~ 100Hz Crossover : 50Hz(500Hz) ~ 5ooHz(5KHZ ) Multiply : x1, x10 Crossover Selector Switch : HPF / FULL / LP-BP Bass Boost : 0~18dB Remote Control Frequency Response Hz 20-20Khs Signal to Noise Ratio dB 105 Damping Factor 200< THD @ 4ohms Less than 0.1% Fuse Rating On Board Yes 80 Amps Indicator Power Yes Protection Yes Speaker & Power terminal Mold Type Yes Power Gauge 4Ga Heatsink Length inch/mm 14.00"/350mm Heatsink Width inch/mm 9.38"/66mm Heatsink Height inch/mm 2.35"/59.6mm Key Features • Variable high pass filter • Variable Band pass filter • 8awg Speaker Connections • 4awg inputs • 4awg inputs • Input mode Switch • Dual power Transformers • Double Sided Printed Circuit Board • Class A/B • Fully Active Crossover
$621.50 $314.99
-
Kicker Kicker 45L7R154 1800W 15" Dual-4-Ohm Car Audio Subwoofer/Sub L7R L7
The L7R Square Sub moves more air, so you get more bass. The design was invented right here in Stillwater, Oklahoma – made to deliver unprecedented efficiency and huge volume! Bigger Bump Originator, n. (əˈrijəˌnādər): see KICKER The engineers at KICKER invented the original square sub to give you more bass - yet take up no more air space than a standard round sub. Welcome to the miraculous world of the L7R! Dual Four-Ohm Voice Coil Wrap Around Gasketing Patented Ribbed Corners Injection-Molded SoloKon™ Woofer SoloKon™ 360-Degree Back Bracing UniPlate™ Back Plate And Pole Piece Bumped Back Plate Thick Tinsel Leads Large Ceramic Magnet Steel Basket With Spoke Design Nickel Plated Speaker Terminals Specifications SIZE [in, cm]:15, 38 IMPEDANCE [Ohms]:4 DVC POWER WATTS [peak/RMS]:1800/900 SENSITIVITY [dB 1w/1m]:88.05 MOUNTING DEPTH [in, cm]:8 -3/8, 21.5 MOUNTING DIAMETER [in, cm]:13-3/4, 34.9 MIN SEALED BOX VOL [cu. ft, L]:1.5, 42.48 MAX SEALED BOX VOL [cu. ft, L]:3, 85 MIN VENTED BOX VOL [cu. ft, L]:3, 85 MAX VENTED BOX VOL [cu. ft, L]:6, 170 What's in the Box:1 - 15" Subwoofer, 1 - install manual, 2 - Kicker stickers
$379.99 $369.99
-
Kicker Kicker 45L7R152 1800W 15" Dual-2-Ohm Car Audio Subwoofer/Sub L7R L7
The L7R Square Sub moves more air, so you get more bass. The design was invented right here in Stillwater, Oklahoma – made to deliver unprecedented efficiency and huge volume! The Original The engineers at KICKER invented the original square sub right here in the heart of America. Designed to give you more bass - yet take up no more air space - than a standard round sub. Welcome to the miraculous world of the L7R! Dual two-Ohm Voice Coil Wrap Around Gasketing Patented Ribbed Corners Injection-Molded SoloKon™ Woofer SoloKon™ 360-Degree Back Bracing UniPlate™ Back Plate And Pole Piece Bumped Back Plate Thick Tinsel Leads Large Ceramic Magnet Steel Basket With Spoke Design Nickel Plated Speaker Terminals Specifications SIZE [in, cm]:15, 38 IMPEDANCE [Ohms]:2 DVC POWER WATTS [peak/RMS]:1800/900 SENSITIVITY [dB 1w/1m]:88.05 MOUNTING DEPTH [in, cm]:8 -3/8, 21.5 MOUNTING DIAMETER [in, cm]:13-3/4, 34.9 MIN SEALED BOX VOL [cu. ft, L]:1.5, 42.48 MAX SEALED BOX VOL [cu. ft, L]:3, 85 MIN VENTED BOX VOL [cu. ft, L]:3, 85 MAX VENTED BOX VOL [cu. ft, L]:6, 170 What's in the Box:1 - 15" Subwoofer, 1 - install manual, 2 - Kicker stickers
$379.99 $369.99
-
Kicker Kicker 51KPX5001 KPX500.1 500W Mono Compact Subwoofer Amplifier Motorcycle/UTV
The Kicker KPX500.1 (51KPX5001) is a dedicated mono subwoofer amplifier with a tiny footprint – built to make a motorcycle, UTV or tight-space install hit hard without draining your charging system.Key Features Up to 500 watts x 1 at 1 ohm Extremely compact, weather-resistant chassis that fits under fairings Variable 40–160 Hz low-pass crossover, 24 dB/octave Variable 10–40 Hz subsonic filter, 24 dB/octave Selectable KickEQ bass boost (0/+6 dB at 40 Hz) Compatible with the optional Kicker CXARC remote bass knob A wide input range lets the KPX500.1 connect to virtually any factory or aftermarket radio.Showtime Electronics is an Authorized Kicker Retailer.
$299.99
-
Kicker Kicker 51KPX3004 KPX300.4 300W 4-Channel Compact Motorcycle/Powersports Amplifier
The Kicker KPX300.4 (51KPX3004) packs full 4-channel power into a tiny, weather-resistant chassis made for motorcycles, UTVs and other space-limited installs. It powers two or four speakers and slips under a fairing without taxing your charging system.Key Features Up to 75 watts x 4 at 2 ohms, or 150 watts x 2 bridged Extremely compact, weather-resistant design Fits under motorcycle fairings Selectable 60/80/100/120 Hz high-pass crossover, 12 dB/octave Independent gain controls Wide input range for factory or aftermarket radios A perfect match for Kicker PS-series powersports speakers.Showtime Electronics is an Authorized Kicker Retailer.
$299.99
-
Kicker Kicker 48BTCAN65 PowerCans 6.5" Bluetooth UTV/Golf Cart Speakers w/ RGB LED 150W
Kicker PowerCans (48BTCAN65) are an all-in-one amplified Bluetooth audio system for side-by-sides, UTVs, golf carts and anything else with a 12-volt battery. Two IP66-rated square enclosures house 6.5" woofers, 1" tweeters and a built-in 150-watt amplifier, so you get loud, clear sound over wind and engine noise without adding a separate amp.Key Features Two-way 6.5" woofer and 1" tweeter in each IP66 weatherproof enclosure Built-in amplifier: 75 watts x 2 (150 watts total) Bluetooth streaming plus 3.5 mm AUX input Line output for adding a subwoofer or more speakers Multi-color RGB LED lighting (expandable with Kicker KMLC LED controller) Back-lit wired remote with oversized, glove-friendly buttons Round clamps included; fits round or square tubing up to 2" wide PowerCans are one of the simplest ways to add serious sound and light to your off-road rig or golf cart.Showtime Electronics is an Authorized Kicker Retailer.
$699.99
-
Kicker Kicker 47PSMB32 PSM 3" Gloss Black Motorcycle Handlebar Speakers ATV/UTV 2-Ohm Pair
Kicker PSM mini enclosed speakers (47PSMB32) bring music to motorcycles, ATVs and any ride with handlebars but no fairing. The gloss black weatherproof enclosures clamp directly to the bars with a single-point cast-aluminum mount, so installation is quick and clean.Key Features Weatherproof enclosed 3" speakers, sold as a pair Durable gloss black finish Single-point cast-aluminum handlebar clamp fits 1-1/4", 1" and 7/8" bars 2-ohm impedance for more output from compact amplifiers Rated for 15–50 watts RMS (100 watts peak) Add a Kicker KPX-series amplifier for a complete system built for rough roads and rougher trails.Showtime Electronics is an Authorized Kicker Retailer.
$199.99
-
Kicker Kicker 47PSM32 PSM 3" Chrome Motorcycle Handlebar Speakers ATV/UTV 2-Ohm Pair
Kicker PSM mini enclosed speakers (47PSM32) bring music to motorcycles, ATVs and any ride with handlebars but no fairing. The chrome weatherproof enclosures clamp directly to the bars with a single-point cast-aluminum mount, so installation is quick and clean.Key Features Weatherproof enclosed 3" speakers, sold as a pair Durable chrome finish Single-point cast-aluminum handlebar clamp fits 1-1/4", 1" and 7/8" bars 2-ohm impedance for more output from compact amplifiers Rated for 15–50 watts RMS (100 watts peak) Add a Kicker KPX-series amplifier for a complete system built for rough roads and rougher trails.Showtime Electronics is an Authorized Kicker Retailer.
$199.99
-
Kicker Kicker 51PSC654 PS 6.5" 120W 4-Ohm Motorcycle & Powersports Coaxial Speakers
The Kicker PS 6.5" 4-ohm coaxial speakers (51PSC654) are designed by riders for motorcycles, ATVs and other powersports vehicles. They are tuned to cut through wind and engine noise – and to sound great even through a helmet.Key Features Weatherproof construction built to survive every kind of riding weather 3/4" titanium tweeters with neodymium magnets for clear, crisp highs High 92.5 dB sensitivity – loud on modest power Shallow 2" mounting depth; installs without modifying the fairing Includes grilles, wiring harnesses, connectors and mounting hardware (pair) Rated for 60 watts RMS (120 watts peak) per speaker. Pair with a Kicker KPX300.4 amplifier for a complete, compact motorcycle audio upgrade.Showtime Electronics is an Authorized Kicker Retailer.
$199.99
-
Kicker Kicker 50CWCD104 CompC 10" 500W Dual 4-Ohm DVC Car Audio Subwoofer Comp C
The Kicker CompC 10" (50CWCD104) delivers the punchy, reliable bass Kicker is known for at an entry-level price. Its dual 4-ohm voice coils and spring-loaded terminals make it simple to match with a Kicker CX-series amplifier for maximum output.Key Features Dual 4-ohm voice coils with spring-loaded terminals for easy wiring Reengineered for increased excursion and deeper bass Injection-molded polypropylene cone Forced-Air Cooling™ for durability under long play Ribbed polyurethane surround with signature yellow stitching High-strength Spiralead™ tinsel leads and high-temp voice coil Stamped steel basket; sealed or ported enclosure Rated for 125–250 watts RMS (500 watts peak) with 85.2 dB sensitivity, the CompC 10" is an ideal upgrade over factory bass in a sealed or ported enclosure.Showtime Electronics is an Authorized Kicker Retailer.
$129.99
-
Kicker Kicker 50CWCD84 CompC 8" 400W Dual 4-Ohm DVC Car Audio Subwoofer Comp C
The Kicker CompC 8" (50CWCD84) is one of the best-value ways to add real bass to your car. This dual 4-ohm voice coil subwoofer is easy to wire and pairs perfectly with a Kicker CX-series amplifier for strong, clean low end without a big budget.Key Features Dual 4-ohm voice coils with spring-loaded terminals for easy wiring Reengineered for increased excursion and deeper bass Injection-molded polypropylene cone Forced-Air Cooling™ for durability under long play Ribbed polyurethane surround with signature yellow stitching High-strength Spiralead™ tinsel leads and high-temp voice coil Stamped steel basket; sealed or ported enclosure Rated for 100–200 watts RMS (400 watts peak), the CompC 8" works in compact sealed or ported boxes, making it a great fit for single-cab trucks, hatchbacks and small trunks.Showtime Electronics is an Authorized Kicker Retailer.
$99.99
-
Kicker Kicker 46L7T82 L7T 8" 700W Dual 2-Ohm Shallow Mount Thin Subwoofer Solo-Baric
The Kicker Solo-Baric L7T 8" (46L7T82) is a true shallow mount subwoofer built for installs where depth is the problem. With a mounting depth of just 2-3/4 inches and a pair of 2-ohm voice coils, it delivers real, full-sounding bass from spaces a round sub could never fit – under a seat, behind a seat, or inside a slim custom enclosure on the road or the trail.Key Features Square Solo-Baric design moves roughly 20% more air than a comparable round sub Only 2-3/4" mounting depth – fits under or behind seats in trucks, Jeeps, UTVs and compact cars Dual voice coil design for flexible wiring SoloKon™ cone with 360-degree back bracing Ribbed Santoprene surround resists heat and aging Bumped top plate for extra excursion; UniPlate™ pole piece and backplate for heat dissipation Durable steel basket; works in sealed or ported enclosures The L7T 8" is rated for 350 watts RMS (700 watts peak) and plays 30–100 Hz. Pair it with a Kicker KX-series mono amplifier for a compact, hard-hitting bass system.Showtime Electronics is an Authorized Kicker Retailer.
$219.99
-
Kicker Kicker 46L7T84 L7T 8" 700W Dual 4-Ohm Shallow Mount Thin Subwoofer Solo-Baric
The Kicker Solo-Baric L7T 8" (46L7T84) is a true shallow mount subwoofer built for installs where depth is the problem. With a mounting depth of just 2-3/4 inches and a pair of 4-ohm voice coils, it delivers real, full-sounding bass from spaces a round sub could never fit – under a seat, behind a seat, or inside a slim custom enclosure on the road or the trail.Key Features Square Solo-Baric design moves roughly 20% more air than a comparable round sub Only 2-3/4" mounting depth – fits under or behind seats in trucks, Jeeps, UTVs and compact cars Dual voice coil design for flexible wiring SoloKon™ cone with 360-degree back bracing Ribbed Santoprene surround resists heat and aging Bumped top plate for extra excursion; UniPlate™ pole piece and backplate for heat dissipation Durable steel basket; works in sealed or ported enclosures The L7T 8" is rated for 350 watts RMS (700 watts peak) and plays 30–100 Hz. Pair it with a Kicker KX-series mono amplifier for a compact, hard-hitting bass system.Showtime Electronics is an Authorized Kicker Retailer.
$219.99
-
Basshead Supply Sundown Audio Single 18" ZV7 Ported Enclosure
Custom built enclosure specifically for the Sundown Audio ZV7 18" subwoofer. Specifications: 7.0 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.625" port dimensions 16.69" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV7 18" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,338.99
-
Basshead Supply Sundown Audio Single 18" ZV6 Ported Enclosure
Custom built enclosure specifically for the Sundown Audio ZV6 18" subwoofer. Specifications: 7.0 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.625" port dimensions 16.69" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV6 18" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,338.99
-
Basshead Supply Sundown Audio Single 18" ZV5 Ported Enclosure
Custom built enclosure specifically for the Sundown Audio ZV5 18" subwoofer. Specifications: 7.0 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.625" port dimensions 16.69" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV5 18" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,338.99
-
Basshead Supply Sundown Audio Single 18" ZV4 Ported Enclosure
Custom built enclosure specifically for the Sundown Audio ZV4 18" subwoofer. Specifications: 7.0 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.625" port dimensions 16.69" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV4 18" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,338.99
-
Basshead Supply Sundown Audio Single 18" ZV3 Ported Enclosure
Custom built enclosure specifically for the Sundown Audio ZV3 18" subwoofer. Specifications: 7.0 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.625" port dimensions 16.68" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV3 18" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,338.99
-
Basshead Supply Sundown Audio Single 18" ZV2 Ported Enclosure
Custom built enclosure specifically for the Sundown Audio ZV2 18" subwoofer. Specifications: 7.0 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.625" port dimensions 16.68" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV2 18" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,338.99
-
Basshead Supply Sundown Audio Single 18" XV4 Ported Enclosure
Custom built enclosure specifically for the Sundown Audio XV4 18" subwoofer. Specifications: 7.0 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.625" port dimensions 16.69" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio XV4 18" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,338.99
-
Basshead Supply Sundown Audio Single 18" XV3 Ported Enclosure
Custom built enclosure specifically for the Sundown Audio XV3 18" subwoofer. Specifications: 7.0 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.625" port dimensions 16.5" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.975142" wide 25.375" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio XV3 18" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,338.99
