All Products Except Clearance
-
Basshead Supply Resilient Sounds Dual 12" Gold v2 Ported Enclosure
Custom built enclosure specifically for the Resilient Sounds Gold v2 12" subwoofer. Specifications: 4.0 cubic feet net enclosure 33.0 hz tuning 57.38 sq inches of port 13.5" x 4.25" port dimensions 11.175" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 3/4" (18mm) center baffle brace 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 15.0" tall 34.875" wide 22.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Resilient Sounds Gold v2 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$755.99
-
Basshead Supply Resilient Sounds Dual 15" Gold v2 Ported Enclosure
Custom built enclosure specifically for the Resilient Sounds Gold v2 15" subwoofer. Specifications: 7.0 cubic feet net enclosure 32.0 hz tuning 99.94 sq inches of port 19.5" x 5.125" port dimensions 14.2363" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 3/4" (18mm) center baffle brace 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 21.0" tall 40.0" wide 22.375" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Resilient Sounds Gold v2 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,063.99
-
Basshead Supply Resilient Sounds Dual 12" Platinum Ported Enclosure
Custom built enclosure specifically for the Resilient Sounds Platinum 12" subwoofer. Specifications: 4.5 cubic feet net enclosure 32.0 hz tuning 65.0 sq inches of port 16.0" x 4.0625" port dimensions 11.2" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 18.0" tall 35.125" wide 21.875" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Resilient Sounds Platinum 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$892.99
-
Basshead Supply Resilient Sounds Dual 15" Platinum Ported Enclosure
Custom built enclosure specifically for the Resilient Sounds Platinum 15" subwoofer. Specifications: 7.0 cubic feet net enclosure 32.0 hz tuning 100.8 sq inches of port 18.0" x 5.6" port dimensions 13.7" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.882691" wide 24.75" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Resilient Sounds Platinum 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,181.99
-
Basshead Supply Resilient Sounds Dual 10" Platinum v2 Ported Enclosure
Custom built enclosure specifically for the Resilient Sounds Platinum v2 10" subwoofer. Specifications: 3.0 cubic feet net enclosure 32.0 hz tuning 43.44 sq inches of port 12.0" x 3.62" port dimensions 9.4375" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 14.0" tall 32.125" wide 22.5" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Resilient Sounds Platinum v2 10" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$734.99
-
Basshead Supply Resilient Sounds Dual 12" Platinum v2 Ported Enclosure
Custom built enclosure specifically for the Resilient Sounds Platinum v2 12" subwoofer. Specifications: 4.5 cubic feet net enclosure 32.0 hz tuning 65.0 sq inches of port 16.0" x 4.0625" port dimensions 11.175" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 18.0" tall 35.5" wide 21.875" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Resilient Sounds Platinum v2 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$892.99
-
Basshead Supply Resilient Sounds Dual 15" Platinum v2 Ported Enclosure
Custom built enclosure specifically for the Resilient Sounds Platinum v2 15" subwoofer. Specifications: 7.0 cubic feet net enclosure 32.0 hz tuning 100.8 sq inches of port 18.0" x 5.6" port dimensions 14.2363" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 40.0" wide 24.9" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Resilient Sounds Platinum v2 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,181.99
-
Basshead Supply American Bass Single 18" Godzilla Ported Enclosure
Custom built enclosure specifically for the American Bass Godzilla 18" subwoofer. Specifications: 6.0 cubic feet net enclosure 30.0 hz tuning 87.75 sq inches of port 18.0" x 4.875" port dimensions 16.75" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.625" wide 22.625" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass Godzilla 18" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,074.99
-
Basshead Supply American Bass Single 18" King Ported Enclosure
Custom built enclosure specifically for the American Bass King 18" subwoofer. Specifications: 6.0 cubic feet net enclosure 30.0 hz tuning 87.75 sq inches of port 18.0" x 4.875" port dimensions 16.75" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.625" wide 22.625" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass King 18" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,074.99
-
Basshead Supply American Bass Single 18" XMAXXX Monster Ported Enclosure
Custom built enclosure specifically for the American Bass XMAXXX Monster 18" subwoofer. Specifications: 6.0 cubic feet net enclosure 30.0 hz tuning 87.75 sq inches of port 18.0" x 4.875" port dimensions 16.75" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.625" wide 22.625" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass XMAXXX Monster 18" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,074.99
-
Basshead Supply Custom Enclosure
$0.00
-
Basshead Supply B2 Audio Single 12" Rage XL Ported Enclosure
Custom built enclosure specifically for the B2 Audio Rage XL 12" subwoofer. Specifications: 2.25 cubic feet net enclosure 32.0 hz tuning 33.25 sq inches of port 14.0" x 2.375" port dimensions 11.1" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 16.0" tall 25.016618" wide 19.75" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a B2 Audio Rage XL 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$629.99
-
Basshead Supply American Bass Single 12" Godzilla MDF Ported Enclosure
Custom built enclosure specifically for the American Bass Godzilla 12" subwoofer. Specifications: 2.476334 cubic feet net enclosure 32.0 hz tuning 36.4 sq inches of port 14.0" x 2.575388" port dimensions 11.125" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 16.0" tall 26.625" wide 19.75" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass Godzilla 12" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$399.59
-
Basshead Supply American Bass Single 15" Godzilla MDF Ported Enclosure
Custom built enclosure specifically for the American Bass Godzilla 15" subwoofer. Specifications: 4.466594 cubic feet net enclosure 30.0 hz tuning 65.0 sq inches of port 16.0" x 4.032341" port dimensions 14.25" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 18.0" tall 33.75" wide 23.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass Godzilla 15" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$551.39
-
Basshead Supply American Bass Single 12" King MDF Ported Enclosure
Custom built enclosure specifically for the American Bass King 12" subwoofer. Specifications: 2.463287 cubic feet net enclosure 32.0 hz tuning 36.4 sq inches of port 14.0" x 2.561818" port dimensions 11.34" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 16.0" tall 26.5" wide 19.75" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass King 12" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$399.59
-
Basshead Supply American Bass Single 15" King MDF Ported Enclosure
Custom built enclosure specifically for the American Bass King 15" subwoofer. Specifications: 4.466594 cubic feet net enclosure 30.0 hz tuning 65.0 sq inches of port 16.0" x 4.032341" port dimensions 14.25" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 18.0" tall 33.75" wide 23.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass King 15" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$551.39
-
Basshead Supply American Bass Single 10" XFL MDF Ported Enclosure
Custom built enclosure specifically for the American Bass XFL 10" subwoofer. Specifications: 1.238005 cubic feet net enclosure 34.0 hz tuning 17.82 sq inches of port 11.5" x 1.535126" port dimensions 9.375" subwoofer cut out 3/4" triple refined MDF construction Solid 1" baffle for ultimate strength Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 13.0" tall 22.875" wide 14.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass XFL 10" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 3/4" triple refined MDF — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 3/4" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$265.19
-
Basshead Supply American Bass Single 12" XFL MDF Ported Enclosure
Custom built enclosure specifically for the American Bass XFL 12" subwoofer. Specifications: 1.978884 cubic feet net enclosure 33.0 hz tuning 28.69 sq inches of port 13.5" x 2.102565" port dimensions 11.4" subwoofer cut out 3/4" triple refined MDF construction Solid 1" baffle for ultimate strength Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 15.0" tall 24.25" wide 17.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass XFL 12" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 3/4" triple refined MDF — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 3/4" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$321.59
-
Basshead Supply American Bass Single 15" XFL MDF Ported Enclosure
Custom built enclosure specifically for the American Bass XFL 15" subwoofer. Specifications: 3.720325 cubic feet net enclosure 32.0 hz tuning 54.25 sq inches of port 15.5" x 3.472303" port dimensions 14.1" subwoofer cut out 3/4" triple refined MDF construction Solid 1" baffle for ultimate strength Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 17.0" tall 31.375" wide 20.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass XFL 15" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 3/4" triple refined MDF — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 3/4" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$453.59
-
Basshead Supply American Bass Single 12" XMAXXX Monster MDF Ported Enclosure
Custom built enclosure specifically for the American Bass XMAXXX Monster 12" subwoofer. Specifications: 2.476334 cubic feet net enclosure 32.0 hz tuning 36.4 sq inches of port 14.0" x 2.575388" port dimensions 11.125" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 16.0" tall 26.625" wide 19.75" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass XMAXXX Monster 12" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$399.59
-
Basshead Supply American Bass Single 15" XMAXXX Monster MDF Ported Enclosure
Custom built enclosure specifically for the American Bass XMAXXX Monster 15" subwoofer. Specifications: 4.466594 cubic feet net enclosure 30.0 hz tuning 65.0 sq inches of port 16.0" x 4.032341" port dimensions 14.25" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 18.0" tall 33.75" wide 23.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass XMAXXX Monster 15" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$551.39
-
Basshead Supply Kicker Single 18" L7X Ported Enclosure
Custom built enclosure specifically for the Kicker L7X 18" subwoofer. Specifications: 7.5 cubic feet net enclosure 28.0 hz tuning 114.0 sq inches of port 19.0" x 6.0" port dimensions 16.5" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Bare unfinished birch — ready to stain, paint or clear-coat Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 21.0" tall 39.84057" wide 27.5" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Kicker L7X 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at our most affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship bare and unfinished — sanded birch with the raw plywood grain left exposed, ready to stain, paint or clear-coat to your own taste, so you can match it to your build and save versus our finished enclosures. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, all the hard work is done — just add your finish of choice. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$902.49
-
Ampere Audio Ampere Audio AA-3.0 Series Car Subwoofer Recone
Recone for AA-3.0 Series subwoofers — AA-3.0 10", AA-3.0 12", AA-3.0 15", and AA-3.0 18" (Dual 1Ω and Dual 2Ω).
$169.99 - $259.99
-
Ampere Audio Ampere Audio AA-2.0 Series 1000W Car Subwoofer
AA 2.0 SERIES SUBWOOFERS The AA 2.0 Series was designed for listeners who want real aftermarket bass performance without sacrificing sound quality, efficiency, or everyday usability. Engineered for clean low-frequency response and dependable output, the 2.0 platform delivers the kind of impact that transforms a factory audio system into something far more capable and engaging. Every AA 2.0 subwoofer is built around a strong steel basket, paper and foam cone assembly, carbon fiber dust cap, and a 2-inch 4-layer copper voice coil. This combination gives the 2.0 platform the balance needed for strong daily output, musical response, and long-term reliability in real-world installations. The dual magnet motor structure and 14 mm of XMAX allow the AA 2.0 Series to deliver clean, controlled bass with the output and authority expected from a serious aftermarket subwoofer. Whether installed in a compact daily system or a stronger low-frequency setup, the 2.0 platform was built to provide balanced performance, musical response, and long-term durability. The AA 2.0 Series serves as the foundation of the AA subwoofer lineup, combining clean design, proven construction, and dependable low-frequency performance into a platform built for enthusiasts who want more from their everyday system. FEATURES 500 Watts RMS power handling Steel basket construction Paper and foam cone assembly Carbon fiber dust cap Progressive cotton spider 2” 4-layer copper voice coil 33mm winding height Dual 40 oz magnet motor structure 14 mm Xmax Designed for daily-driven audio systems Built for clean, dependable low-frequency output Available in Dual 2 Ohm and Dual 4 Ohm configurations ENGINEERED FOR EVERYDAY PERFORMANCE The AA 2.0 Series was engineered to deliver stronger low-frequency performance than factory and entry-level aftermarket systems while maintaining the responsiveness and musical accuracy needed for everyday listening. Its lightweight cone assembly, copper voice coil, and balanced motor structure work together to produce clean bass across a wide range of music styles. From compact 8-inch enclosures to stronger 10-inch and 12-inch systems, the AA 2.0 platform delivers the output, control, and reliability needed for enthusiasts building a well-rounded daily audio system.
$79.99 - $99.99
