All Products Except Clearance
-
Kicker Kicker 51PSC654 PS 6.5" 120W 4-Ohm Motorcycle & Powersports Coaxial Speakers
The Kicker PS 6.5" 4-ohm coaxial speakers (51PSC654) are designed by riders for motorcycles, ATVs and other powersports vehicles. They are tuned to cut through wind and engine noise – and to sound great even through a helmet.Key Features Weatherproof construction built to survive every kind of riding weather 3/4" titanium tweeters with neodymium magnets for clear, crisp highs High 92.5 dB sensitivity – loud on modest power Shallow 2" mounting depth; installs without modifying the fairing Includes grilles, wiring harnesses, connectors and mounting hardware (pair) Rated for 60 watts RMS (120 watts peak) per speaker. Pair with a Kicker KPX300.4 amplifier for a complete, compact motorcycle audio upgrade.Showtime Electronics is an Authorized Kicker Retailer.
$199.99
-
Kicker Kicker 50CWCD104 CompC 10" 500W Dual 4-Ohm DVC Car Audio Subwoofer Comp C
The Kicker CompC 10" (50CWCD104) delivers the punchy, reliable bass Kicker is known for at an entry-level price. Its dual 4-ohm voice coils and spring-loaded terminals make it simple to match with a Kicker CX-series amplifier for maximum output.Key Features Dual 4-ohm voice coils with spring-loaded terminals for easy wiring Reengineered for increased excursion and deeper bass Injection-molded polypropylene cone Forced-Air Cooling™ for durability under long play Ribbed polyurethane surround with signature yellow stitching High-strength Spiralead™ tinsel leads and high-temp voice coil Stamped steel basket; sealed or ported enclosure Rated for 125–250 watts RMS (500 watts peak) with 85.2 dB sensitivity, the CompC 10" is an ideal upgrade over factory bass in a sealed or ported enclosure.Showtime Electronics is an Authorized Kicker Retailer.
$129.99
-
Kicker Kicker 50CWCD84 CompC 8" 400W Dual 4-Ohm DVC Car Audio Subwoofer Comp C
The Kicker CompC 8" (50CWCD84) is one of the best-value ways to add real bass to your car. This dual 4-ohm voice coil subwoofer is easy to wire and pairs perfectly with a Kicker CX-series amplifier for strong, clean low end without a big budget.Key Features Dual 4-ohm voice coils with spring-loaded terminals for easy wiring Reengineered for increased excursion and deeper bass Injection-molded polypropylene cone Forced-Air Cooling™ for durability under long play Ribbed polyurethane surround with signature yellow stitching High-strength Spiralead™ tinsel leads and high-temp voice coil Stamped steel basket; sealed or ported enclosure Rated for 100–200 watts RMS (400 watts peak), the CompC 8" works in compact sealed or ported boxes, making it a great fit for single-cab trucks, hatchbacks and small trunks.Showtime Electronics is an Authorized Kicker Retailer.
$99.99
-
Kicker Kicker 46L7T82 L7T 8" 700W Dual 2-Ohm Shallow Mount Thin Subwoofer Solo-Baric
The Kicker Solo-Baric L7T 8" (46L7T82) is a true shallow mount subwoofer built for installs where depth is the problem. With a mounting depth of just 2-3/4 inches and a pair of 2-ohm voice coils, it delivers real, full-sounding bass from spaces a round sub could never fit – under a seat, behind a seat, or inside a slim custom enclosure on the road or the trail.Key Features Square Solo-Baric design moves roughly 20% more air than a comparable round sub Only 2-3/4" mounting depth – fits under or behind seats in trucks, Jeeps, UTVs and compact cars Dual voice coil design for flexible wiring SoloKon™ cone with 360-degree back bracing Ribbed Santoprene surround resists heat and aging Bumped top plate for extra excursion; UniPlate™ pole piece and backplate for heat dissipation Durable steel basket; works in sealed or ported enclosures The L7T 8" is rated for 350 watts RMS (700 watts peak) and plays 30–100 Hz. Pair it with a Kicker KX-series mono amplifier for a compact, hard-hitting bass system.Showtime Electronics is an Authorized Kicker Retailer.
$219.99
-
Kicker Kicker 46L7T84 L7T 8" 700W Dual 4-Ohm Shallow Mount Thin Subwoofer Solo-Baric
The Kicker Solo-Baric L7T 8" (46L7T84) is a true shallow mount subwoofer built for installs where depth is the problem. With a mounting depth of just 2-3/4 inches and a pair of 4-ohm voice coils, it delivers real, full-sounding bass from spaces a round sub could never fit – under a seat, behind a seat, or inside a slim custom enclosure on the road or the trail.Key Features Square Solo-Baric design moves roughly 20% more air than a comparable round sub Only 2-3/4" mounting depth – fits under or behind seats in trucks, Jeeps, UTVs and compact cars Dual voice coil design for flexible wiring SoloKon™ cone with 360-degree back bracing Ribbed Santoprene surround resists heat and aging Bumped top plate for extra excursion; UniPlate™ pole piece and backplate for heat dissipation Durable steel basket; works in sealed or ported enclosures The L7T 8" is rated for 350 watts RMS (700 watts peak) and plays 30–100 Hz. Pair it with a Kicker KX-series mono amplifier for a compact, hard-hitting bass system.Showtime Electronics is an Authorized Kicker Retailer.
$219.99
-
Basshead Supply American Bass Single 18" Godzilla Ported Enclosure
Custom built enclosure specifically for the American Bass Godzilla 18" subwoofer. Specifications: 6.0 cubic feet net enclosure 30.0 hz tuning 87.75 sq inches of port 18.0" x 4.875" port dimensions 16.75" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.625" wide 22.625" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass Godzilla 18" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,074.99
-
Basshead Supply American Bass Single 18" King Ported Enclosure
Custom built enclosure specifically for the American Bass King 18" subwoofer. Specifications: 6.0 cubic feet net enclosure 30.0 hz tuning 87.75 sq inches of port 18.0" x 4.875" port dimensions 16.75" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.625" wide 22.625" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass King 18" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,074.99
-
Basshead Supply American Bass Single 18" XMAXXX Monster Ported Enclosure
Custom built enclosure specifically for the American Bass XMAXXX Monster 18" subwoofer. Specifications: 6.0 cubic feet net enclosure 30.0 hz tuning 87.75 sq inches of port 18.0" x 4.875" port dimensions 16.75" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.625" wide 22.625" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass XMAXXX Monster 18" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$1,074.99
-
Basshead Supply Kicker Single 18" L7X Ported Enclosure
Custom built enclosure specifically for the Kicker L7X 18" subwoofer. Specifications: 7.5 cubic feet net enclosure 28.0 hz tuning 114.0 sq inches of port 19.0" x 6.0" port dimensions 16.5" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Bare unfinished birch — ready to stain, paint or clear-coat Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 21.0" tall 39.84057" wide 27.5" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Kicker L7X 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at our most affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship bare and unfinished — sanded birch with the raw plywood grain left exposed, ready to stain, paint or clear-coat to your own taste, so you can match it to your build and save versus our finished enclosures. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, all the hard work is done — just add your finish of choice. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$938.59
-
Basshead Supply Kicker Dual 8" L7 Ported Enclosure
Custom built enclosure specifically for the Kicker L7 8" subwoofer. Specifications: 1.5 cubic feet net enclosure 34.0 hz tuning 21.0 sq inches of port 10.5" x 2.0" port dimensions 7.375" subwoofer cut out 3/4" (18mm) plywood construction 3/4" (18mm) center baffle brace 13 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 12.0" tall 23.826301" wide 17.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Kicker L7 8" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our strong baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 1000W RMS (dual enclosures - 2000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$440.99
-
Basshead Supply Orion Dual 12" HCCA Ported Enclosure
Custom built enclosure specifically for the Orion HCCA 12" subwoofer. Specifications: 4.5 cubic feet net enclosure 32.0 hz tuning 64.0 sq inches of port 16.0" x 4.0" port dimensions 11.5" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 18.0" tall 35.619349" wide 21.875" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Orion HCCA 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$892.99
-
Basshead Supply Orion Single 12" HCCA Ported Enclosure
Custom built enclosure specifically for the Orion HCCA 12" subwoofer. Specifications: 2.25 cubic feet net enclosure 32.0 hz tuning 32.2 sq inches of port 14.0" x 2.3" port dimensions 11.5" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 16.0" tall 24.484032" wide 19.75" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Orion HCCA 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$629.99
-
Basshead Supply Deaf Bonce Dual 12" 3512R MDF Ported Enclosure
Custom built enclosure specifically for the Deaf Bonce 3512R 12" subwoofer. Specifications: 4.957445 cubic feet net enclosure 32.0 hz tuning 72.0 sq inches of port 16.0" x 4.4617" port dimensions 11.18" subwoofer cut out 1" triple refined MDF construction 1" center baffle brace Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 18.0" tall 38.625" wide 21.875" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Deaf Bonce 3512R 12" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$566.99
-
Basshead Supply Basshead Supply Single 12" 2.0V2 Ported Enclosure
Custom built enclosure specifically for the Basshead Supply 2.0V2 12" subwoofer. Specifications: 2.0 cubic feet net enclosure 32.0 hz tuning 28.69 sq inches of port 13.5" x 2.125" port dimensions 11.125" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 15.0" tall 24.625" wide 17.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Basshead Supply 2.0V2 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$482.39
-
Basshead Supply Basshead Supply Single 10" 1.25V2 Ported Enclosure
Custom built enclosure specifically for the Basshead Supply 1.25V2 10" subwoofer. Specifications: 1.25 cubic feet net enclosure 33.05 hz tuning 17.82 sq inches of port 11.5" x 1.55" port dimensions 9.375" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 13.0" tall 21.375" wide 15.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Basshead Supply 1.25V2 10" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$397.79
-
Basshead Supply Basshead Supply Dual 12" 4.0V2 Ported Enclosure
Custom built enclosure specifically for the Basshead Supply 4.0V2 12" subwoofer. Specifications: 4.0 cubic feet net enclosure 32.0 hz tuning 11.125" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 3/4" (18mm) center baffle brace 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 15.0" tall 23.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Basshead Supply 4.0V2 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$680.39
-
Basshead Supply Basshead Supply Single 15" 3.5 Ported Enclosure
Custom built enclosure specifically for the Basshead Supply 3.5 15" subwoofer. Specifications: 3.5 cubic feet net enclosure 30.75 hz tuning 50.38 sq inches of port 15.5" x 3.25" port dimensions 14.125" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 17.0" tall 30.0" wide 20.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Basshead Supply 3.5 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$638.09
-
Colossal Sounds Ultra U-12 12" 2500w Car Audio Subwoofer
The Colossal Sounds Ultra 12" subwoofer combines high-output SPL performance with accurate daily-driver sound. This 12-inch ground-pounder is designed for strong, efficient output across a wide range of music.Its cooling-focused motor assembly, non-pressed paper cone, carbon-fiber dust cap, Nomex spider pack, heavy-duty sewn-in lead wires, and cast-aluminum basket are engineered for durability, cone control, and consistent daily output.
$549.99
-
Basshead Supply Basshead Supply Dual 8" 1.5 Ported Enclosure
Custom built enclosure specifically for the Basshead Supply 1.5 8" subwoofer. Specifications: 1.5 cubic feet net enclosure 34.0 hz tuning 21.0 sq inches of port 10.5" x 2.0" port dimensions 7.375" subwoofer cut out 3/4" (18mm) plywood construction 3/4" (18mm) center baffle brace 13 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 12.0" tall 23.875" wide 17.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Basshead Supply 1.5 8" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our strong baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 1000W RMS (dual enclosures - 2000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$396.89
-
Colossal Sounds Extreme EX-10 10" 750w Car Audio Subwoofer
The Colossal Sounds Extreme 10" subwoofer is a dependable daily driver built for strong, controlled low-frequency output.Its ferrite motor, non-pressed paper cone, carbon-fiber dust cap, progressive spider pack, heavy-duty lead wires, and cooling-focused stamped-steel basket are designed for durable everyday performance.
$139.99
-
Colossal Sounds Extreme EX-12 12" 750w Car Audio Subwoofer
The Colossal Sounds Extreme 12" subwoofer is a dependable daily driver built for strong, controlled low-frequency output.Its ferrite motor, non-pressed paper cone, carbon-fiber dust cap, progressive spider pack, heavy-duty lead wires, and cooling-focused stamped-steel basket are designed for durable everyday performance.
$149.99
-
Basshead Supply Basshead Supply Dual 10" 2.5 Ported Enclosure
Custom built enclosure specifically for the Basshead Supply 2.5 10" subwoofer. Specifications: 2.5 cubic feet net enclosure 33.0 hz tuning 36.75 sq inches of port 14.0" x 2.625" port dimensions 9.375" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 3/4" (18mm) center baffle brace 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 15.5" tall 27.75" wide 18.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Basshead Supply 2.5 10" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$539.99
-
Basshead Supply 4ga Spring Loaded Subwoofer Binding Post Terminal
4ga Spring Loaded Subwoofer Binding Post Terminal Spring loaded binding post Accepts 4 gauge wire Sold as a pair - one red - one black
$11.99
-
Basshead Supply 2.13" (54mm) Carbon Fiber Speaker Subwoofer Dust Cap
Dust Cap Material: Carbon fiber Outer Diameter: 5.13" (130mm) Thickness: .03" (.8mm) Flange Width: .08" (2mm) Flange Angle: 30 degrees Weight: 10 grams
$17.99
