All Items
-
Basshead Supply Sundown Audio Single 18" ZV2 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio ZV2 18" subwoofer. Specifications: 6.946228 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.58179" port dimensions 16.68" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV2 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$803.39
-
Basshead Supply Sundown Audio Single 18" ZV3 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio ZV3 18" subwoofer. Specifications: 6.946228 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.58179" port dimensions 16.68" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV3 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$803.39
-
Basshead Supply Sundown Audio Single 18" XV4 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio XV4 18" subwoofer. Specifications: 6.946356 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.581893" port dimensions 16.69" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio XV4 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$803.39
-
Basshead Supply Sundown Audio Single 18" ZV4 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio ZV4 18" subwoofer. Specifications: 6.946356 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.581893" port dimensions 16.69" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV4 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$803.39
-
Basshead Supply Sundown Audio Single 18" ZV6 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio ZV6 18" subwoofer. Specifications: 6.946356 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.581893" port dimensions 16.69" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV6 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$803.39
-
Basshead Supply Sundown Audio Single 18" ZV5 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio ZV5 18" subwoofer. Specifications: 6.946356 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.581893" port dimensions 16.69" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV5 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$803.39
-
Basshead Supply Sundown Audio Single 18" ZV7 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio ZV7 18" subwoofer. Specifications: 6.946356 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.581893" port dimensions 16.69" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV7 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$803.39
-
Basshead Supply Sundown Audio Single 18" XV3 MDF Ported Enclosure
Custom built enclosure specifically for the Sundown Audio XV3 18" subwoofer. Specifications: 6.946356 cubic feet net enclosure 30.0 hz tuning 101.25 sq inches of port 18.0" x 5.581893" port dimensions 16.69" subwoofer cut out 1" triple refined MDF construction Dense, uniform, void-free triple refined MDF panel Ships bare / unfinished — sanded and ready to finish your way Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 20.0" tall 39.875" wide 25.125" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio XV3 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at the most affordable price — finished YOUR way. Using premium 1" triple refined MDF all around — a heavier, higher-grade board — we are able to achieve a dense, acoustically inert enclosure; the heavy, dead panel has no resonance of its own, so it stays out of the way of your sound. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 1" baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship BARE and unfinished — sanded and ready for you to finish your way, whether that's paint, bedliner, vinyl wrap, or carpet; we recommend sealing the raw MDF promptly and keeping it dry until finished. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$803.39
-
Basshead Supply Kicker Single 18" L7X Ported Enclosure
Custom built enclosure specifically for the Kicker L7X 18" subwoofer. Specifications: 7.5 cubic feet net enclosure 28.0 hz tuning 114.0 sq inches of port 19.0" x 6.0" port dimensions 16.5" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Bare unfinished birch — ready to stain, paint or clear-coat Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 21.0" tall 39.84057" wide 27.5" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Kicker L7X 18" subwoofer. At Basshead Supply the goal with the "foundation series" enclosures is to offer subwoofer specific enclosures that are well built and well performing at our most affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. These ship bare and unfinished — sanded birch with the raw plywood grain left exposed, ready to stain, paint or clear-coat to your own taste, so you can match it to your build and save versus our finished enclosures. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, all the hard work is done — just add your finish of choice. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$938.59
-
Basshead Supply Kicker Dual 8" L7 Ported Enclosure
Custom built enclosure specifically for the Kicker L7 8" subwoofer. Specifications: 1.5 cubic feet net enclosure 34.0 hz tuning 21.0 sq inches of port 10.5" x 2.0" port dimensions 7.375" subwoofer cut out 3/4" (18mm) plywood construction 3/4" (18mm) center baffle brace 13 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 12.0" tall 23.826301" wide 17.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Kicker L7 8" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our strong baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 1000W RMS (dual enclosures - 2000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$440.99
-
Basshead Supply Sundown Audio Single 15" NSV1 Ported Enclosure
Custom built enclosure specifically for the Sundown Audio NSV1 15" subwoofer. Specifications: 4.25 cubic feet net enclosure 30.0 hz tuning 62.0 sq inches of port 16.0" x 3.875" port dimensions 13.93" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 18.0" tall 31.94851" wide 23.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio NSV1 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$892.99
-
Basshead Supply Sundown Audio Single 15" NSV2 Subs Up Port Back Ported Enclosure
Custom built enclosure specifically for the Sundown Audio NSV2 15" subwoofer. Specifications: 4.25 cubic feet net enclosure 30.0 hz tuning 62.0 sq inches of port 16.0" x 3.875" port dimensions 13.93" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 18.0" tall 31.94851" wide 23.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio NSV2 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$892.99
-
Basshead Supply Sundown Audio Single 15" NSV3 Subs Up Port Back Ported Enclosure
Custom built enclosure specifically for the Sundown Audio NSV3 15" subwoofer. Specifications: 4.25 cubic feet net enclosure 30.0 hz tuning 62.0 sq inches of port 16.0" x 3.875" port dimensions 13.93" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 18.0" tall 31.94851" wide 23.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio NSV3 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$892.99
-
Basshead Supply Sundown Audio Single 15" NSV4 Subs Up Port Back Ported Enclosure
Custom built enclosure specifically for the Sundown Audio NSV4 15" subwoofer. Specifications: 4.25 cubic feet net enclosure 30.0 hz tuning 62.0 sq inches of port 16.0" x 3.875" port dimensions 13.93" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 18.0" tall 31.94851" wide 23.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio NSV4 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$892.99
-
Basshead Supply Sundown Audio Single 15" NSV5 Subs Up Port Back Ported Enclosure
Custom built enclosure specifically for the Sundown Audio NSV5 15" subwoofer. Specifications: 4.25 cubic feet net enclosure 30.0 hz tuning 62.0 sq inches of port 16.0" x 3.875" port dimensions 13.93" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 18.0" tall 31.94851" wide 23.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio NSV5 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$892.99
-
Basshead Supply Sundown Audio Single 15" NSV6 Subs Up Port Back Ported Enclosure
Custom built enclosure specifically for the Sundown Audio NSV6 15" subwoofer. Specifications: 4.25 cubic feet net enclosure 30.0 hz tuning 62.0 sq inches of port 16.0" x 3.875" port dimensions 13.93" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 18.0" tall 31.94851" wide 23.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio NSV6 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$892.99
-
Basshead Supply Orion Dual 12" HCCA Ported Enclosure
Custom built enclosure specifically for the Orion HCCA 12" subwoofer. Specifications: 4.5 cubic feet net enclosure 32.0 hz tuning 64.0 sq inches of port 16.0" x 4.0" port dimensions 11.5" subwoofer cut out 1" (24mm) plywood construction 1" (24mm) center baffle brace 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 18.0" tall 35.619349" wide 21.875" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Orion HCCA 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$892.99
-
Basshead Supply Orion Single 12" HCCA Ported Enclosure
Custom built enclosure specifically for the Orion HCCA 12" subwoofer. Specifications: 2.25 cubic feet net enclosure 32.0 hz tuning 32.2 sq inches of port 14.0" x 2.3" port dimensions 11.5" subwoofer cut out 1" (24mm) plywood construction 17 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 16.0" tall 24.484032" wide 19.75" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Orion HCCA 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$629.99
-
Basshead Supply Basshead Supply Single 12" 2.0V2 Ported Enclosure
Custom built enclosure specifically for the Basshead Supply 2.0V2 12" subwoofer. Specifications: 2.0 cubic feet net enclosure 32.0 hz tuning 28.69 sq inches of port 13.5" x 2.125" port dimensions 11.125" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 15.0" tall 24.625" wide 17.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Basshead Supply 2.0V2 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$482.39
-
Basshead Supply Basshead Supply Single 10" 1.25V2 Ported Enclosure
Custom built enclosure specifically for the Basshead Supply 1.25V2 10" subwoofer. Specifications: 1.25 cubic feet net enclosure 33.05 hz tuning 17.82 sq inches of port 11.5" x 1.55" port dimensions 9.375" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 13.0" tall 21.375" wide 15.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Basshead Supply 1.25V2 10" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$397.79
-
Basshead Supply Basshead Supply Dual 12" 4.0V2 Ported Enclosure
Custom built enclosure specifically for the Basshead Supply 4.0V2 12" subwoofer. Specifications: 4.0 cubic feet net enclosure 32.0 hz tuning 11.125" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 3/4" (18mm) center baffle brace 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 15.0" tall 23.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Basshead Supply 4.0V2 12" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$680.39
-
Basshead Supply Basshead Supply Single 15" 3.5 Ported Enclosure
Custom built enclosure specifically for the Basshead Supply 3.5 15" subwoofer. Specifications: 3.5 cubic feet net enclosure 30.75 hz tuning 50.38 sq inches of port 15.5" x 3.25" port dimensions 14.125" subwoofer cut out 3/4" (18mm) birch plywood construction Solid 1" (24mm) baffle for ultimate strength 13 ply birch veneer construction (1" Baffle 17 ply) Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 17.0" tall 30.0" wide 20.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Basshead Supply 3.5 15" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$638.09
-
Colossal Sounds Ultra U-12 12" 2500w Car Audio Subwoofer
The Colossal Sounds Ultra 12" subwoofer combines high-output SPL performance with accurate daily-driver sound. This 12-inch ground-pounder is designed for strong, efficient output across a wide range of music.Its cooling-focused motor assembly, non-pressed paper cone, carbon-fiber dust cap, Nomex spider pack, heavy-duty sewn-in lead wires, and cast-aluminum basket are engineered for durability, cone control, and consistent daily output.
$549.99
-
Basshead Supply Basshead Supply Dual 8" 1.5 Ported Enclosure
Custom built enclosure specifically for the Basshead Supply 1.5 8" subwoofer. Specifications: 1.5 cubic feet net enclosure 34.0 hz tuning 21.0 sq inches of port 10.5" x 2.0" port dimensions 7.375" subwoofer cut out 3/4" (18mm) plywood construction 3/4" (18mm) center baffle brace 13 ply birch veneer construction Gray stained finish Pre-wired metal binding post with 10ga OFC wire Dimensions/Weight: 12.0" tall 23.875" wide 17.0" deep Lead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Basshead Supply 1.5 8" subwoofer. At Basshead Supply the goal with the "performance series" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3/4" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our strong baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 1000W RMS (dual enclosures - 2000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.
$396.89
