2-Channel Amplifiers

Stereo Integrity SIQ 200.2 Amplifier: Purity and Power in Two Channels The Stereo Integrity SIQ 200.2 brings true high-fidelity audio engineering back to mobile sound systems. Built by audiophiles for the most discerning listeners, this powerful 2-Channel Class A/B amplifier prioritizes signal integrity above all else. Its design features zero filters, zero crossovers, and zero EQ, delivering a full bandwidth signal (5 Hz to 150,000 Hz) that is clean, precise, and uncompromised. This is the foundation for an accurate soundstage and breathtaking sonic detail. Uncompromised Audiophile Construction Every component in the SIQ 200.2 was selected based on its acoustic performance and long-term durability: Output Transistors: Utilizes audiophile-grade TO-3 output transistors for clean, linear power delivery. Internal Circuitry: Features high-quality UPC4570 op-amps, IRFPO64N power supply transistors, and sand cast resistors throughout the construction. Aesthetics: Protected by a thick extruded aluminum chassis with a copper anodized shielded transformer cover to minimize electromagnetic interference, all visible through a large plexiglass viewing window. High Power, Ultra-Low Distortion Performance The SIQ 200.2 delivers robust power with unmatched fidelity, validated by Audio Precision measurements: Rated RMS Power Output (2 Channels): 200W RMS x2 @ 4Ω High Current Output: 400W RMS x2 @ 2Ω Bridged Monoblock Power: 800W RMS x1 @ 4Ω Total Harmonic Distortion (THD): 0.03 % (Exceptional clarity) Signal-to-Noise Ratio (SNR): 92 dB Installation and Specifications Purity Control: Features a discrete gain knob per channel for precise level matching. Connections: Premium Tiffany-style RCA connections accepting inputs up to 16 Volts. Dimensions: Compact size at 14 x 8 x 2 Inches. Current Draw: Maximum current draw of 85.6 amps. The SIQ 200.2 is the ultimate 2-channel solution for audiophiles seeking true, powerful sound reproduction in their vehicle.   Amplifiers Specifications Frequency Response Minimum 5 Hz Frequency Response Maximum 150,000 Hz Signal-to-Noise Ratio (SNR) 92 dB Total Harmonic Distortion (THD) 0.03 % Dimensions (W x H x D) 14 x 8 x 2 Inches Rated RMS power output into all 4 channels at 4 ohm 200 Watts Rated RMS power output into all 4 channels at 2 ohm 400 Watts Bridged RMS power into 2 channels at 4 ohm 800 Watts Power Idle Current Draw 1.3 amps Maximum Current Draw 85.6 amps   Connections RCA Input Maximum 16 Volts

Read more less

Specifications: Model:ABR-200.2 Type: Amplifier Class-AB Number of the channels:2 Frequency Response:10-20000 Hz 2 Ohm RMS Power (14.4 V):100 W x 2 4 Ohm RMS Power (14.4 V):80 W x 2 4 Ohm RMS Power (Bridge):200 W x 1 Minimum permissible load on the channel:2 Ohm Minimum permissible load in a bridge connection:4 Ohm Input SPL: 0.2 - 6 V Low Pass Filter:50-500 Hz High Pass Filter:50-500 Hz Crossover :12 dB/Oct Bass Boost: None dB Damping Factor:≥ 170 Working Voltage: 9 - 15 V Signal-to-noise Ratio:≥ 92 dB Dimensions:(L xWxH): 10.63 x 8.66 x 1.97 inch

Read more less

JP32.2 - 6000W RMS 2-Channel Amp Experience powerful, high-quality sound in your vehicle with the JP32.2 - 6000W RMS 2-Channel Amplifier. Featuring a high-speed MOSFET power supply and stable output for 1ohm stereo or 2ohm bridged, this car audio amp ensures your music is crystal clear and vibrant. Customize Your Audio with Advanced Features: The JP32.2 - 6000W RMS 2-Channel Amplifier boasts cutting-edge features that allow you to personalize your sound experience. Variable high-pass and low-pass filters, crossover multiply x10, and band-pass filter capabilities enable you to fine-tune your audio to suit your preferences. Plus, the adjustable bass boost and frequency let you enhance the bass to your desired level. Safe and Reliable Amplification: Designed with safety in mind, the JP32.2 - 6000W RMS 2-Channel Amplifier incorporates 4-way protection circuits to guard against overheating, voltage issues, speaker shorting, and DC damage. The high-purity copper printed circuit board ensures reliability and longevity, while the pair of 0-gauge power and ground terminals (2 power + 2 Grounds = 4 Total) make installation secure and straightforward. Additional Clipping and Distortion Features: The JP32.2 amplifier includes: CLIP IN: Red CLIP OUT: 0.5% THD (Blue), 5% THD (Violet), 10% THD (Red) Specifications: RMS Power 1 Ohm (3200W x 2) 2 Ohm (2000W x 2) 4 Ohm (1200W x 2) 2 Ohm Bridged (6000W x 1) 4 Ohm Bridged (4000W x 1) Frequency Response: 10 Hz - 23 kHz MADE IN KOREA High-Pass Filter: 20 (200) Hz - 800 (8K) Hz, x1, x10 Low-Pass Filter: 50 (500) Hz - 800 (8K) Hz, x1, x10 Bass Boost: 0 - 18dB Bass Frequency: 20Hz - 80Hz Input Sensitivity: 6V - 0.2V Signal to Noise Ratio: 80dB THD @ 4 Ohm: 0.1% Working Voltage: 9V - 15.5V Fuse Rating: 500A Dimensions (LxWxH): 19.68" x 9.37" x 2.71" 4 - 0 gauge inputs Included Wired Metal Bass Knob: Features Power, Clip, Protect, and Voltage indicators. Important Note: To support this amplifier's 6000W RMS output, a robust electrical system is required by law, not just a suggestion. Weak electrical systems are not covered under warranty.

Read more less

540 x 1 @ 4 ohms 270 x 2 @ 2 ohms 150 x 2 @ 4 ohms Variable 12dB filter: 50Hz-500Hz Power and protection indicators included Thermal, voltage, and speaker short protection circuitry Waterproof (IP67 rated) Bluetooth receiver built-in Sealed wire/signal bulkheads Gasketed audio control cover RCA line out Our SAMv.2 amplifiers are ideal for your boat, bike or UTV. On the trail or on the road, this micro amplifier fits in tight spaces, but don’t let the size fool you - they pack some big power. SAM-series amps are rated IP67, certified to withstand full submersion when getting wild off-road, or when its time to clean up when the fun is done. Both of our multi-channel amps have built-in Bluetooth, so a source unit is not needed! Just sync to your phone and enjoy! Ready to go big? With the included line output, it’s easy to add additional amplifiers to the system.

Read more less

Specifications Model MMA-2200D Class D Number of the channels 2 Frequency response 10-22000 Hz 2 Ohm RMS Power (14.4 V) 300 W x 2 4 Ohm RMS Power (14.4 V) 200 W x 2 4 Ohm RMS Power (Bridge) 600 W x 1 Minimum permissible load on the channel 0 Ohm Input SPL 0.2 - 6 V Low pass filter 50-500 Hz High pass filter 50-500 Hz Crossover 12 dB/Oct Bass frequency adjustment 45 Hz Damping factor ≥ 150 Working voltage 9 - 15 V Signal-to-noise ratio ≥ 90 dB Size (WxLxH) 5.20 x 9.25 x 1.85 inch Gross weight 4.67 lb (2.12 kg)

Read more less