Skip to content
Skip to product information
1 of 1

Incriminator Audio Death Penalty DP21 D1/D2 21" 2000W RMS Subwoofer

$739.00 USD
$739.00 USD
Sale Sold out
Shipping calculated at checkout.

Free Lanyard and Stickers With Every Purchase

Full Manufacturer Warranty On All Products

Impedance: Dual-1
  • Multiple Financing Options
  • Expert Support Before and After Purchase
  • Free Shipping On Orders $75+
  • Full Warranty On Every Product

About the Product

*Death Penalty Series Subwoofers are built to order, expect a 14-21 day build time*

Description

The 2013 Death Penalty was designed to be the ultimate ground-pounder subwoofer. Vehicles that are designed to be high powered sub-bass machines (ground-pounders) have requirements that are a bit different than both standard daily driven vehicles and SPL vehicles. They require a subwoofer that can handle extreme amounts of power for long periods of time, both thermally and mechanically, and must be able to do this time and time again.

Three years ago we introduced our Death Penalty with the S.T.A.R. (Six Tier Axis Radical Cooling) motor design with the concept of rapidly cooling the coil by pushing more air with our Air-Driven Cooling, the solution was radical, but the results were remarkable, as the coil last even longer while performing even harder. The 2013 model goal was to engineer the motor with a traditional look, but keep the S.T.A.R. design and we did just that.

The newest version of S.T.A.R. has a traditional top and bottom plate, but adds a seventh magnet wedge for even more motor force over an even larger gap. This has increased the usable X-max of the subwoofer in combination with a longer voice coil assembly. We’ve increased the motor to a 9.25” diameter for extra motor strength, as well as increased motor gap vent cooling with Air-Driven Cooling (ADC) and supplemental rear side vents. The pole vent has a dome shaped top just above the pole to allow air to be pushed out the S.T.A.R. designed side and rear vents on the cones downward stroke. Just under the dome the pole has six machined cooling vents to allow air to be pulled into the gap and the process repeats with the concept of exchanging air as fast as possible, keep fresh cooling air around the coil at all times. The motor is then covered with our custom tooled magnet boot to give the driver a uniform look.

To reduce mechanical fatigue and to maintain linear cone movement throughout the stroke a multiple layer suspension is utilized. The dual lead wires are sewn to the suspension pack in order to both eliminate noises from the lead slapping the cone, and to reduce movement of the leads which can cause them to break. The final touch is our new two-tone red and silver oversize DP skull on the front dustcap.

Features

  • 8 Spoke Black Cast Basket
  • 3" Heavy Gauge 4 Layer Flat Aluminum Voice Coil
  • Triple Black Progressive Spiders with Dual Woven Tinsel Leads
  • High Pressure Kraft Fiber Reinforced Cone
  • Multi-Layer Foam Surround
  • 9.25" 260 Oz Double Magnet Structure with Black Nickel Finish
  • 912 Oz / 62 Pound Motor Structure
  • Interlocking Aluminum Spider Spacer Assembly
  • CILD² - Center Interlocking Dustcap
  • ADC - Air Driven Cooling
  • S.T.A.R. Motor Design for Built in Motor Cooling
  • Nickel Plated Push Terminals
  • Wrap Around Rubber Gasket
  • 2000 Watt RMS Rated
  • DVC 1 ohm or 2 ohm
  • DP21D1 and DP21D2

Specifications

Driver
12 Inch 15 Inch 18 Inch 21 Inch
FS
43 Hz 40 Hz 38 Hz 34 Hz
Re
2Ω Series 2Ω Series 2Ω Series 2Ω Series
Qms
8.13 8.98 9.32 10.51
Qes
0.40 0.43 0.47 0.52
Qts
0.37 0.40 0.43 0.49
Mms
240 g 275 g 330 g 395 g
Cms
0.05 mm/N 0.05 mm/N 0.05 mm/N 0.05 mm/N
Sd
480 cm² 810 cm² 1210 cm² 1620 cm²
Vas
23 L 56 L 123 L 189 L
Spl
90.1 dB 92.8 dB 94.1 dB 95.8 dB
BL
22.6 22.6 22.6 22.6
X-max
29 mm 29 mm 29 mm 29 mm
Sub Diameter
12.37" 15.50" 18.50" 21.25"
Mounting
11.12" 14.12" 16.87" 19.25"
Depth
9.39" 10.39" 11.77" 12.39"
Displacement
.21 Cu. Ft. .22 Cu. Ft. .24 Cu. Ft. .25 Cu. Ft.
Power
2000 RMS 2000 RMS 2000 RMS 2000 RMS
Want to Upgrade Your Sub? Email Us to Find Out How!  Options Include:
  • XS – Extra Spider
  • PCC – DP Coil Change - Dual 0.35, Dual 0.50, Dual 1.0, Dual 2.0
  • DC – Direct Connect
  • DU – Dustcap Laminated Print Upgrade

Free shipping is available in the continental United States, excluding Hawaii and Alaska.

International shipping is available and calculated at checkout.

All orders will receive tracking once shipped through USPS, Fedex, UPS, and DHL.

Return for refund within: 30 days

Return for replacement within: 30 days

Standard Return Policy Overview

You may return merchandise purchased from Showtime Electronics for a refund or a replacement, provided that the procedures and requirements are followed. All returns require a return merchandise authorization (RMA) number. An RMA number must be issued within 30 calendar days after the date of purchase. An RMA number is valid for 14 calendar days after it is issued. Once you log in to your user account, you will be able to Request and RMA. In addition, you can also request an RMA at the bottom of our homepage. If you have any issues, please email us at sales@showtimeelectronics.com

View Product Details
You might like
×

Please wait...

Make An Offer

Descriptive image text
Descriptive image text
×

Offerly Support

Don't fret! This pop up only shows up in Shopify Editor Mode. Offerly could not find your add to cart button! This can happen for one of the following reasons:

    1. This product is sold out.
      To solve this please navigate to a different product!

    2. Your Theme is custom or uses different text for the "Add to Cart" button.
      If this is the case, please contact support and we will add support for your theme!