Skip to content
PRV Audio 10MR650A 10" 4-Ohm 650W Midrange Car Pro Audio Speaker MID
FREE GIFT WITH EVERY PURCHASE AUTOMATICALLY ADDED TO CART!
PRV Audio’s ALTO Series were carefully crafted and voiced to reproduce a natural, smooth sound while remaining dynamic. To get the superior fidelity, a special composite cone is used to smooth frequency response and to keep the moving mass low, increasing the efficiency. Meet the new improved version from 10W650A
- New basket design implemented, reducing its size from 4.33″ to 3.90″ of mounting depth
- Improvement on output throughout + 1dB on the low frequency frequency response
- Gain on the vocal response from 350 Hz to 4000 Hz
- Increased on voice coil winding has improved power handle and raised its Xmax to 5.72 mm
The purpose to built this midrange was to increase vocal response where the 10W650A lack output without losing any midbass.
All new features on the 10MR650A make it capable of high output and low distortion, this mid range is perfect for filling in the important mid range response in any high output sound system. Great Addition to the ALTO Series!
GENERAL SPECIFICATIONS
| Nominal Diameter | 10″ (254 mm) |
| Nominal impedance | 8 Ohms |
| Rated AES Power Handling (RMS) | 325 Watts |
| Program Power | 650 Watts |
| Sensitivity 2.83V at 1m | 97.5 dB |
| Recommended Hi Pass Crossover****For Full Power Handling | 150 Hz** **12db Per Octave Crossover |
| Frequency Response at -10DB | 80 – 6,500 Hz |
| Voice Coil Diameter | 2.5″ (68 mm) |
| Voice Coil Wire | CCAW |
| Voice Coil Winding Depth | 16.2 mm |
| Former Material | Polyimide |
| Magnetic Gap Depth | 9.5 mm |
| Frame Material | Stamped Steel |
THIELE-SMALL PARAMETERS
| Equivalent Volume | Vas | 41.9 l |
| Excursion (mathematical)*** | Xmax | 5.72 mm |
| Free Air Resonance | Fs | 64.7 Hz |
| Mechanical Factor | Qms | 14.19 |
| Electrical Factor | Qes | 0.48 |
| Total Factor | Qts | 0.47 |
| Cone Area | Sd | 398 cm² |
| Mechanical Mass | Mms | 31.86 g |
| Bl Factor | Bl | 12.25 Tm |
| Dc Resistance | Re | 5.6 Ohms |
| Inductance | Le | 0.44 mH at 1 kHz |
| Mechanical Mass Without Air | Mmd | 27.37 g |
| Mechanical Compliance | Cms | 0.190 mm/N |
***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4
EXTRA INFO
| Overall Diameter | 10.10”(256.5 mm) |
| Front Mount Baffle Cutout | 9.20” (233.5 mm) |
| Mounting Depth | 3.90”(99 mm) |
| Overall Depth | 4.23”(107.5 mm) |
| Net Weight | 10.4 Lbs (4.7 kg) |
| Shipping Weight | 12.8 Lbs (5.8 kg) |
| Carton Dimensions W x L x H | 12.9”x 12.9” x 6.9” (328 x 328 x 175mm) |